Help needed in text entry box...

hi,
I have created one assessment simulation, which has a few text entry boxes. This I have included it in another flash file. Output of that flash file is .exe and not .swf. But when I play that exe; this simulation doent allow to enter the text, while instead and exe if I play the SWF its working properly.
I want it to work in .exe as well....
Plz help....
Suajg

Hi,
We are creating a WBT in flash. Output of this WBT is an exe file. There are some instructions and do's n dont's where we have given this Assessment. This assessment is in swf format created in Captivate 4.
Regards,
Suajg

Similar Messages

How do I allow a user to enter multiple lines of text within a Text Entry Box?

I need a text entry box that allows for multiple lines to be inputted with in a Text Entry Box. How can I make this possible?

Go to the Options accordion and check 'Show scrollbar'.
Lilybiri

Text Entry Boxes and their content not being captured in Automatic Recording

I have searched the forums here and elsewhere extensively and whilst I have found people with similar issues, I have yet to find a solution. My problem is this:
I am trying to record myself using a piece of software which contains numerous text fields. In the past, when using Captivate 3, I would simply fill out these fields and Captivate would record my entries automatically. When the project was played back, the training simulation would pause and allow the user to type in the text field and provided the entry matched the options I had defined, the simulation would continue to the next step.
So, my colleague and I have since bought Adobe Tech. Comms. Suite 2 and have upgraded Captivate 3 to version 4. Ever since doing this we have both been unable to successfully capture text entry boxes with their content when recording automatically in any mode. We have checked and triple checked the settings to make sure that the automatic capture of text entry in fields is turned on yet we still cannot get Captivate to perform this task it once so easily could. We both suffer from the same problem on both of our installations of Captivate 4. We have tried recording in all modes with no success.
I am tearing my hair out as I need to come up with some sample content for a major Governmental client which would be worth a 5 figure sum to my company and I really don't relish having to manually create every text entry box as there are a LOT of them in this application!
I have also reported this as a bug to Adobe using the correct form. As yet, no response.
I would really appreciate any genuine help that can be offered by you guys.
In desperation,
Rob.

Ok, I think I've sussed it!
I've been pulling my hair out for weeks on this and after posting on here, I decided to try something and I think I may have found the problem.
I work with a laptop as I am a Trainer and therefore quite mobile. When I'm in the office, I dock my laptop and use the Extended Desktop functionality of Windows so I have my laptop screen and a second 19" monitor which i find incredibly useful as screen real estate is always at a premium. And this is where I believe the problem lies.
I performed a simple test and have repeated this test with identical outcomes everytime. Here is what I did. I fired up Captivate and Outlook and opened up a new mail window in Outlook. I then set Captivate to record the new mail window and hit record. I typed some text into the To field and the Subject field and then stopped the recording. I then previewed the results. When the new mail window was on my primary screen, (i.e the laptop) the Text Entry Box recording worked 100% fine. However, if the new mail screen was residing on my secondary screen, i.e. the monitor, the Text Entry Box recording failed!
So it would seem that Captivate 4 has an issue with seeing the text entered on a secondary monitor when Windows is running in Extended Desktop mode. I am absolutely certain this wasn't an issue with Captivate 3 as I created plenty of content without any of these problems and I was using the Extended Desktop back then.
So, if anyone else is having the same issue, and you are running an Extended Desktop, try what I did above.
In the meantime, I am raising this issue with Adobe in the hope they can get this fixed, but at least now I can carry on with my content creation
Regards,
Rob.

Text Entry Box not showing all text

I am creating a simple exercise where I would like the user to copy text from the course, paste it into word, and report back what the word count is. I thought perhaps the Text Entry Box would be the best way to go, since if you click on the existing (default) text, you can copy it. However after I place the paragraph of text in the box, and resize in the editor so that all the text shows, it does not show all the text when playing back, either previewd or published. It only shows the last few words of the last line at the top of the box.
Is there something I am missing? Or, is there an easier/better way to do what I need?
Thanks

Hi all
If this is Captivate 4, there may not be any need for a widget to do this. I'm guessing you haven't tried enabling the Scroll Bar for the Text Entry Box (TEB)?
When I just plop a TEB on a slide, I get this in edit view:
During playback it looks like this:
But if I edit the TEB properties and enable the Show Scrollbar option:
I get this in the output:
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Text Entry Box--Advanced Actions--Conditional Statement--Double quotes in literal input value

Hello forums,
I'm new to the forums (and Captivate in general), but I'm having a real problem carrying out a tutorial design and I think you may be my only hope. Let me explain what I want to do and the difficulty that I'm having:
I'm an instruction librarian at a university, and I'm designing an interactive tutorial for English 100 students to complete in order to become familiar with how to search the library catalog. What I've done is taken a screenshot of the catalog search page, made it the background of a slide in Captivate (vers. 6), and placed a text entry box over the search bar in the screenshot. The idea is for the students to conduct a simulated search by choosing one of three suggested search string formulations, and depending on the search string they enter, the tutorial will jump to a slide featuring a screenshot of what the actual search results would look like. The idea is to emphasize the use of keywords over full-sentence phrases, and the use of double quotation marks to enclose multi-word search terms.
So I've set the action for the TEB to "Execute Advanced Actions" and then created some IF/THEN statements in the "Advanced Actions" pop-up window (with action type set to 'conditional'). The script is such that if the student enters the first search option (how does sleep affect college students) in the TEB, the tutorial jumps to 1 slide, if they enter the second option (college students AND sleep), featuring a Boolean operator (AND), the tutorial jumps to a 2nd slide, and if they enter the third option ("college students" AND sleep) with the double quotes around "college students" and the Boolean operator, the tutorial should jump to a 3rd slide. This action script works fine for the first two input options, but I can't make it work for the third search option.
I think that it has something to do with the fact that the third input option features double quote marks, and this seems to throw off the script (I tried a quote-less input value for the third IF/THEN just to make sure that it would work jumping to the 3rd slide and it did), and I'm wondering if anyone has any suggestions as to how I can get around this issue. Again, I need it to work so that if the student enters "college students" AND sleep, with the quote marks and the Boolean operator, the tutorial will jump to a slide showing the search results if those search terms were used in a real search of the catalog.
I'd be extremely grateful for any help that anyone here can give me, we've been trying to make our online tutorials more engaging and interactive (and therefore more interesting), and I think this would be a great way to teach students about using quotes in their catalog searches.
Thank you for your time and consideration.
Andrew Wilk
College Library
UW-Madison

The tutorial is for a "how to use catalog searching" instruction in an undergraduate library session. We use boolean operators (AND, OR, NOT) to combine search terms, ex. to search for books about the sleeping habits of college students, I would enter "college students AND sleep." Because "college students" is a multi-word phrase to describe one concept, I need to put quotation marks around the phrase to prevent the catalog from searching for the individual words separately, so the most correct search becomes ["college students" AND sleep] with quotation marks around only "college students," a user-typed "AND," and the word "sleep" (no q-marks).
A colleague of mine worked out a pretty cool (if complicated) solution that I'll share if anyone is interested. Since the q-marks where the problem, we've set it up so that the TEB validates the response for the search string with q-marks around "college students." If they enter it correctly, the tutorial jumps to the corresponding slide. The attempt # is set to 1, and if the user fails to enter the validated phrase (they misspell or use one of the other response options) then the TEB is set to run an Advanced Actions Script in which the other two options are scripted in IF/THEN statements that cause, when the term is entered correctly, the tutorial to jump to their corresponding slides. We've created another tab of IF/THEN statements that say that if the response is NOT equal to one of these response options, then the slide restarts (technically the slide "jumps" back to itself and starts over) and the user gets another chance to start the cycle over again.
I know this is confusing (I had a really hard time explaining it in words), so if anyone is interested I could make a Jing video when I have some time.
Thank you for all your suggestions

How can I get a click box to interact with a text entry box on the same page?

I'm creating a tutorial on using a specific system and trying to recreate what the end user would actual do in the system. On one slide, the end user must enter text into a field, then press a button (click box) to advance to the next slide. I want to be able to have the click box validate if the text entry is correct before advancing to the next slide. Is there a way to get the click box to validate the text entry? Not sure how to get the two objects to "talk" to each other rather than function independently.
Literally, I want the end user to enter the data in the text entry box, then click on the Get button. I need the Get button (click box) to both validate that the data entered in the text entry box is correct and, if it is, advance to the next slide. If the data is incorrect, I need the Get button (click box) to show the failure caption and have the end user re-enter the data correctly.
How do I get the objects to work together?

Hi there
You need to delete the Click Box. Yes, you heard me. Delete the puppy.
I know it sounds weird. But bear with me. After you delete it, double-click the Text Entry Box. Then click the Options tab. See that option called Show Button? Click it and click OK to dismiss the TEB properties.
Now you have the button you want. If you don't want a button, double-click it and set it as transparent. Remove the text. Position as desired where the Click Box was before.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Text entry box question

Hey all, I am currently working on a project and have run
into a snag and cant seem to find the answer, or even if what i
need can be done.
Question 1: how do I advance a slide with the correct entry
of a text field without a button or keypress?
Question 2: if this is not possible, how can i have a text
entry box check for correct input using a custom button?
Any help would be appreciated, Thanks.
M. Anderson

Hi M. Anderson
The first question may be accomplished if (and only if) the
last letter the user is supposed to type is unique among all the
letters. For example, BOFFO would not work. O occurs twice. But
LIFE would work, because E is unique. You could then configure the
letter E to be the shortcut for the Text Entry Box.
For the button, it's pretty easy. Click the Options tab and
look at your choices. Make sure the "Button" option contains a
check mark. After you dismiss the dialog, you end up with a rather
generic looking button. But once you enable the button, you may
then double-click it to edit its properties. You could choose an
image, or you could make it invisible and position the invisible
button over another image you placed on the slide as a simple image
object.
Hopefully this helps some... Rick

Text entry box instead of typing

In order to capture the screens I need, I have to enter text by typing it into a form. But I don't want the text I'm typing to appear in the final project. Instead, I want remove the typed text and replace it with a text entry box so that the learner can type in their own text.
Is it possible to convert typed text into a text entry box?
Is there a preference setting that would prevent the typed text from showing or convert it to a text entry box?
I hope someone can help with a suggestion.

You can add the text entry box (TEB) on top of the required field, assign a variable to this TEB and in later slides, insert a smartshape and call this variable wherever required.
However I see some challenges in this, depending on your specific requirement.
1. If this variable is called 50 slides later, you should add a smartshape and call this variable 50 times. A bit tedious task.
2. Depending on the UI color changes, you should also change the smartshape color as many times in as many slides if you want to match the colors. Same with smartshape positions. Again, a tedious task.
3. What if this value is partially shown on a slide? A good lot of graphic editing work there. Use case: The user is creating a child node for some tree structure and you want to use this feature to let the user enter any node name he wants. Later in some other screen, this node (as part of the tree) appears on the right pane and the pane is partially hidden, then you will have to hide this new text also partially.
There may be few more challenges you might want to consider before deciding this.
Sreekanth

How to validate the number of characters in Text Entry box?

Hi
I have inserted a text entry box and assigned a variable (UserName) to it. Now, I need to limit the entry to a maxinum number of 20 characters. In other words, how do I validate the number of characters in the text entry box and provide feedback if it is more than 20 characters?

Thanks.
I have posted this as a query on the relevant post on Jim's website. I am too new to regular expressions. I hope he will help with an example as well.
http://captivatedev.com/2012/07/31/adobe-captivate-6-x-widget-text-entry-box-validator/
Sreekanth

How to make mutiple shortcut keys in one text entry box

I'm trying to make F8 and Enter work in one text entry box and only one because I need to make the scoring work the way I want it to. I have made both F8 and Enter work, however they are both in seperate text entry boxes when I want both to work in the same text entry box... Please Help, this will solve alot of problems I've been having.

Ok so I tried using advanced actions and failed... here's my attempt on putting 2 shortcuts in one text entry box with different entries like the problem described earlier on this thread:
Note: I have 2 TEB in one slide I tried using in this action.. 1 has variable name PF8, the other has PF82, where I'm trying to have PF82 contain both actions of both TEBs.
1. Went into advanced actions.
2. Action name: Linking2inone
3. Made it a conditional action.
4. In "IF" attempted to use both any and all conditions are true
5. Also in "IF" PF82 contains PF8
6. Actions Jump to Slide 11
7. updated action successfully.
Then I closed advanced actions. I tried making the PF8 TEB have "no action" when correct and tested it... didn't work... then I made PF8 TEB have Jump to slide 11 when correct, cut and pasted it to another slide because I thought that PF8 TEB as a seperate TEB in the same slide was messing with the Advanced Action I'm trying to perform. Therefore, since PF8 was just in another slide, PF8 wouldn't be deleted still having the same action value in advanced actions having PF82 contain the action of PF8; but this failed as well...

Cp 6 no blinking cursor in text entry box

Howdy,
Upon slide enter, when a slide has a text entry box, there would be a blinking cursor in the TEB to help alert the user that they will need to type something.
Howerver, in Cp 6 I'm not seeing a blinking/flashing cursor in a TEB like I did with Cp5.5 and b4.
Is this something I have to enable? Why is it so inconsistent?
Thanks,
k

This is a known bug, focus loss for TEB's. I heard that the team is working on it and hope really they release a patch quickly,
Lilybiri

Submit All button for all text entry boxes at end of exam in Captivate 7

Hi everyone,
I am new to this forum, and I was hoping that someone could help me out with a problem that has been eating my lunch for the last week.
I have a captivate 7 project that I am setting up as a virtual workbook, with text entry boxes asking true/false, yes/no, and short essay questions through out the most part of the workbook, and then at the end it has a series of multiple choice questions that are set up on question slides. Is there a way to have all of the text entered in the text entry boxes submited along with the quiz questions at the end, to my LMS? And if at all possible, still inform the user if there are any questions that have not been answered? Like I said, I am new to this forum, so if I forgot to include any important information, I apologise, but if anyone could help me ouot, I would be extreemly thankful!
thanks,
Luke

thenks for the reply Lilybiri! As far as I have been able to find, there is no way to associate a submit all button with TEBs, so I am not sure if this is something that I am overlooking, or if I am misunderstanding the recomemendation.
What I am trying to do is set up a bunch of TEBs to be answer entry boxes for questions throughout the workbook, which will lead up to an exam. The exam, I am good on, because it has the submit all button attached. But the TEBs that I am using as the answer entry boxes, I can't seem to find a way to link them all to the same submit button.
I hope I am being pretty clear about it, but I've been pounding away at this for a while, so I fear it might come out a but rambly. So, please let me know if I need to clarify anything.
Thanks!

Advanced action: jump to next slide if all text entry boxes are filled out. If not, pause project and show error message

Hi there
Working with captivate 4 and advanced actions, which is a great new feature, I encounter the following problem:
I have a sign-in slide, where the user has to insert his name and several other data. For user-friendly handling, I have the text entry boxes appearing one after another, so when the user confirms his entry, the next text entry box appears and has the focus.
The button for jumping to the next slide works with an advanced action:
Only if the user has filled out all the text entry boxes, the action "jump to the next slide" is performed.
If not, an error message is shown.
It works well so far.
Now, I want the project to pause there, and not to jump back to the beginning of the slide (as suggested in another Thread in this forum), because then the text entry boxes dissappear again.
I tried to set the movie control variable rdcmndPause to 1 in order to make the movie pause, but nothing happens.
I tried it with an external playback control bar and without, it didn't work in either case.
I found the hint:
To control the project through the skin file, add the prefix cpSkinLoader_mc to the variables. This might be the solution.(?)
But how can I change the name of a MovieControl Variable?
If anyone knows, how this is supposed to work or has another suggestion to solve the problem, please let me now.
Thanks a lot.
Petra

Hi Petra,
I believe I can help you, but from a completely different angle than anything you've tried yet. I try to find simple solutions to complex problems. No advanced actions will be needed, just a little creative timing. First, I need to be sure I correctly understand what it is you're hoping to accomplish.
If I understand you correctly, you've got a single welcome slide. On this slide you've got several TEB's (text entry boxes), set up with variables to make your project more personal or gather some required information. These TEB's have no right or wrong answers, they simply require an entry: such as an address which begins with a numeric key. The TEB's are set to appear one after another, as one is completed the next one appears. Once all have been completed a next button, set to "jump to next slide" takes them to the next slide and on through your course. You want the project to pause until the user clicks this button, and only proceed if all TEB's have been entered. If not, you wish an error message to appear.
If the above description is correct, I'd do the following:
Leave your TEB's to show up one at a time as the previous is submitted, as you've described. (each one pauses the slide till info is submitted, then "continues" the slide and the next TEB displays)
Set each TEB to "display for rest of slide".
For the next button: In the properties dialog box, options tab, name the button "Next_button" and uncheck the visibility box.
Open the properties for the final TEB that students will fill in and set the on success property to "show" then choose the Next_button by clicking the drop down arrow beside the "show" field. This will hide the Next button until all TEB's have been filled in.
There is no error message, because there is no possibility of error. Why tell a student they've messed up, just eliminate that possibility! All TEB's only display after the previous is entered, and the Next button is hidden until the last TEB is entered.
I've tested this in a simple 3 slide project and it all worked fine, including some variables. If you need more detailed info, or would like to see the sample proj. I created let me know.
Hope this helps.
randy

Moving on to next slide right after completion of TEB (text entry box).

Hello all--
I'm using Captivate 4.
I have a system training course where we require learners to enter the appropriate date into an TEB. After the date is entered, I want Captivate to move on to the next slide. For example, on screen 1, the learner enters '060510', then Captivate should move on to the next slide.
I can make Captivate work great with text menus: for example, if the learner enters the correct menu item 'A', then I can set the shortcut key to A which causes Captivate to move to the next slide right away and very nicely. But I can't figure out how to make this work with dates. Any suggestions???

Hi there
What you need is a shortcut key to trigger the action. Captivate makes it super easy to assign shortcuts, but they aren't without issues.
For example, some shortcut keys are always interpreted by the browser and therefore cannot be used reliably. In your case a likely shortcut would be to assign 0 as the shortcut. But this has issues because the first character typed is a 0. So the first time 0 were pressed an error would likely be issued because the field isn't complete yet and doesn't match the expected date.
I've seen this asked about before. What is really needed here is for Captivate to allow configuring a Text Entry Box object so it is constantly on the hunt for a specific string the author configures. Once the criteria has been satisfied, the assigned action occurs. You (and anyone else that wants to see this emerge as a feature) should ask Adobe via the Wish Form (link is in my sig).
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

How do I incorporate text entry boxes into a quiz?

Hi Everyone,
I am very new to Captivate 8. I am trying to incorporate TEB's into a quiz. When I try to check the button (include in quiz) it is grey and does not allow me to check it. In addition I do not know how to let the programme know what text I would consider correct or incorrect after the student has typed it into the text boxes.
I am obviously missing something and would be very grateful for help because I am losing my patience ++ (all the videos on the web regarding this do not appear to be for captivate 8, only earlier versions :-()
Thanks
Alex

Hey everybody.
Im very new to Adobe Captivate and I try to create questions where the students have to enter numbers only. So I don't want them to be able to enter letters in to the field.
In text entry boxes I'm able to set it to numbers only. Is there a way to control this in quizzes as well?
If I try to create a new question I get only the choice showed on the pic below. Is there a possibility to add text entry boxes as quiz questions to the question-pool?

Help needed in text entry box...

Similar Messages

Maybe you are looking for