Help needed in textfield

Dear frnds,
I ve created some no.of jtextfields and one jtextarea. After some processing text in the text area is somthing like..
field1
field3
field10
field7
Now my problem is when i click on field1 the focus has to go to field1 and similar to all. And as soon as mouse placed in field1(Textarea) it has to become bold and underlined.(Somthing like anchor tag in html)
plzz send me the response, i'm waiting

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
            iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

Similar Messages

  • Please urgent help needed for the following

    Hi Everybody!
    I desperately need help as soon as possible.
    Following is the partial code for the driver program which will use the Employee class Objects(Employee is declared abstract). If you want to see whole code you can take a look at my last two or three posts in this forum.
    1-     Now data input by the user in the specific field( name, rate ) should be displayed in the �List� at the top of the frame after pressing �Enter� key. Can anyone help me to achieve this functionality. While doing this keep in mind the capacity of Array
    2-     I also need �rate� textfield to enabled initially & become disable when �raise� (for trigerring calculating raise in weekly pay) is checked. On this �increased� textbox will become �enabled� which was disabled initially.
    3-     The stuff which may have the problems is followed by �*******************�.
    // here is how I declared handlers
    ActionEventHandler handler = new ActionEventHandler();
    ItemEventHandler listener = new ItemEventHandler();
    // here is the declaration of awt components which are going to be placed on Frame.
    public class ActionEventHandler implements ActionListener
    public void actionPerformed(ActionEvent event)
    //if(event.getSource() == enterButton)
    for (int i = 0 ; i < empArray.length; i++)
    if(event.getSource() == enterButton)
    empData.add(nameField.getText());
    /*else if(event.getSource() == hoursField)
    calcWeeklyPay();
    if(event.getSource() == clearButton)
    nameField.setText("");
    hoursField.setText("");
    rateField.setText("");
    increaseField.setText("");
    }//else if
    }//ActionEventHandler
    public class ItemEventHandler implements ItemListener
    public void itemStateChanged(ItemEvent event)
    //if(event.getSource() == enterButton)
    if(hEmployee.getState())
    createHourly();
    }//if
    /*else
    sEmployee.setState(true);
    createSalaried();
    }//else*/
    else if(raiseSal.getState())
    increaseField.setEnabled(true);
    rateField.setEnabled(false);
    }//itemStateChanged
    }//ItemEventHandler
    public void createHourly()
    nameField.requestFocus();
    //String name = nameField.getText();
    double payRate = Double.parseDouble(rateField.getText());
    double hours = Double.parseDouble(hoursField.getText());
    empArray[empCreated] = new HourlyEmployee(nameField.getText(), payRate, hours);
    currentEmp = empCreated;
    empCreated++;
    //empData.add(emp.toString());
    enterButton.setLabel("add");
    }//createHourly
    /* public void createSalaried()
    nameField.requestFocus();
    //String name = nameField.getText();
    double payRate = Double.parseDouble(rateField.getText());
    double hours = Double.parseDouble(hoursField.getText());
    empArray[empCreated] = new HourlyEmployee(nameField.getText(), payRate, hours);
    currentEmp = empCreated;
    empCreated++;
    enterButton = new Button("add");
    }//createSalaried*/
    looking forward your kindness

    Visit YAT-Yet Another Thread this is a discussion using the Sun book Core Java 2
    and one part in that book uses an example with Employee class of which I assume you are stealing your class-name from. Anyway, that thread is in the Java forums.

  • HELP! My TextField is freaking out...

    Hello!
    I'm creating a command-based client where i have a textfield for handling input. Now, i'm having a problem with handling TextField events (or something in that way)... I want to be able to type in commands, but i should also be able to use the numpad keys for calling some other methods that i bind to them.... now, everything works well, the methods are called when i press the numpad keys (i use a keyListener). The problem however is that after the numpad keys have been pressed and the appropriate methods have been called the keyPressed event(or whatever it is) seems to be passed on to the textfield, so the number is printed in the textfield... i dont want the number to be printed, only the method to be called... anyone got an idea? Stop the event from being forwarded or something??? (it is really nessecary for the the textfield to be in focus, since i should be able to type commands or press the numpad shortcuts at any time)... help!

    keyListener). The problem however is that after the
    numpad keys have been pressed and the appropriate
    methods have been called the keyPressed event(or
    whatever it is) seems to be passed on to the
    textfield, so the number is printed in the
    textfield... i dont want the number to be printed,Use setEditable(false); on the textfield to keep input from going to it.
    (it is really nessecary for the the textfield to be in
    focus, since i should be able to type commands or
    press the numpad shortcuts at any time)... help!The component that has the focus will detect keyevents and forward them to keylisteners. If you are responding to keyevents, you MIGHT not need the textfield, just a keylistener on the components in your applet/application.

  • Troubleshoting help needed:  My iMac keeps crashing and restarting with a report detail: "spinlock application timed out"  What can I do to fix this?timed out"

    Troubleshooting help needed:  My iMac keeps crashing and restarting with a notice: "Spinlock application timed out"  What can I do?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
    Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

  • Help needed for writing query

    help needed for writing query
    i have the following tables(with data) as mentioned below
    FK*-foregin key (SUBJECTS)
    FK**-foregin key (COMBINATION)
    1)SUBJECTS(table name)     
    SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
    2           02           Computer Science
    3           03           Physics
    4           04           Chemistry
    5           05           Mathematics
    7           07           Commerce
    8           08           Computer Applications
    9           09           Biology
    2)COMBINATION
    COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
    383           S1      9           4           2           3
    384           S2      4           2           5           3
    ---------I actually designed the ABOVE table also like this
    3) a)COMBINATION
    COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
    383           S1
    384           S2
    b)COMBINATION_DET
    COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
    1               383          9
    2               383          4
    3               383          2
    4               383          3
    5               384          4
    6               384          2          
    7               384          5
    8               384          3
    Business rule: a combination consists of a maximum of 4 subjects (must contain)
    and the user is less relevant to a COMB_NAME(name of combinations) but user need
    the subjects contained in combinations
    i need the following output
    COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
    383     S1     Biology Chemistry      Computer Science Physics
    384     S2     Chemistry Computer Science Mathematics Physics
    or even this is enough(what i actually needed)
    COMB_ID     subjects
    383           Biology,Chemistry,Computer Science,Physics
    384           Chemistry,Computer Science,Mathematics,Physics
    you can use any of the COMBINATION table(either (2) or (3))
    and i want to know
    1)which design is good in this case
    (i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
    good method to link with same table but if 4 subjects only(and must) comes
    detail table is not neccessary )
    now i am achieving the result by program-coding in C# after getting the rows from oracle
    i am using oracle 9i (also ODP.NET)
    i want to know how can i get the result in the stored procedure itsef.
    2)how it could be designed in any other way.
    any help/suggestion is welcome
    thanks for your time --Pradeesh

    Well I forgot the table-alias, here now with:
    SELECT C.COMB_ID
    , C.COMB_NAME
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
    FROM COMBINATION C;
    As you need exactly 4 subjects, the columns-solution is just fine I would say.

  • Help needed I have a canon 40D. I am thinking of buying a canon 6D.But not sure that my len

    Hi all help needed I have a canon 40D. I am thinking of buying a canon 6D.
    But not sure that my lenses will work.
    I have a 170mm/ 500mm APO Sigma.
    A 10/20 ex  Sigma   HSM  IF.
    And a 180 APO Sigma Macro or do I have to scrap them and buy others.
    ALL Help will be greatly received. Yours  BRODIE

    In short, I love it. I was going to buy the 5DMark III. After playing with it for a while at my local Fry's store where they put 5DMII, 5DMIII and 6D next to each other, using the same 24-105L lens, I decided to get the 6D and pocket the different for lens later.
    I'm upgrading from the 30D. So I think you'll love it. It's a great camera. I have used 5DMII extensively before (borrowing from a close friend).
    Funny thing is at first I don't really care about the GPS and Wifi much. I thought they're just marketing-gimmick. But once you have it, it is actually really fun and helpful. For example, I can place the 6D on a long "monopod", then use the app on the phone to control the camera to get some unique perspective on some scenes. It's fun and great. GPS is also nice for travel guy like me.
    Weekend Travelers Blog | Eastern Sierra Fall Color Guide

  • Help needed! Raid degraded again!

    Hi!
    Help needed! I hava made bootable RAID with two S-ATAII 250Gb HDD and its not working! Every now and then at bootup I get a message RAID -> DEGRADED... Must be seventh time! Rebuild takes its own time!
    What am I doing wrong!
    T: Ekku
    K8N Neo4 Ultra
    AMD 64 4200+
    2 Gb RAM
    2 x 250 Gb HDD (Maxtor)
    nVidia RAID (in mb)
    P.S. I wery SORRY with my poor language!

    I'm going to blame the nVRAID because I've seen issues with it in the past. If your motherboard has another non-nVidia RAID solution, use that instead. Using the nVidia SATA ports as BASE or JBOD is fine and dandy but RAIDing always had issues. It's not even a driver issue I think it's just instability. Latest drivers and even boxed drivers never helped. Granted, some will report success with their rig. But on a professional level I've seen nForce issues on different motherboards and different hard drives that had RAID disaster stories.
    Good luck and if you don't have another RAID solution, my suggestion would be to buy a dedicated RAID controller card.
    LPB

  • HELP NEEDED WITH ADDAPTER-DVI TO VGA.

    PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE...
    ......THIS ENSURES NO SMOKE!!!                                                                                           
    THE CARD IS AN ATI RADEON RX9250-DUAL HEAD-.........ADDAPTER IS DVI(ANALOG)MALE TO VGA(ANALOG)FEMALE.
    ANY HELP VERY MUCH APPRECIATED........ SEEMS YOU NEED TO BE ROCKET SCI TO ATTACH A BLOODY PICTURE...SO THIS HAS BEEN BIG WASTE OF FING TIME!

    Quote from: BOBHIGH on 17-December-05, 09:21:31
    Get over it mate !
    I find it easy t read CAPS...and if you dont like it ...DONT READ IT!
    And why bother to reply...some people have nothing better to do.
    Yes there chep and easy to come by...Ive already got a new one.
    All I wanted was to make a diagram of whats inside the bloody thing...it was a simple question and required a simple answer.
    NO NEED TO A WANKA !!
    I feel a bann comming up.
    Have you tryed Google ? really.. your question is inrelevant. No need to reply indeed.
    Why do you come here asking this question anyway ? is it becouse you have a MSI gfx card ? and the adapter has nothing to do with this ?
    You think you can come in here yelling.. thinking we have to put up with it and accept your style of posting. This is not a MSI tech center.. it's a user to user center.. Your question has nothing to do with MSI relavant things anyway's.
    Google = your friend.
    Quote from: BOBHIGH on 17-December-05, 09:21:31
    it was a simple question and required a simple answer
    Simple for who ? you (buying a new one) ? me ? we ?   .really...........
    Quote from: Dynamike on 16-December-05, 04:11:48
    1: There are allot of diffrent types of those adapters.
    If any of the mods have a problem about my reply.. please pm me.

  • Help needed for grouping.

    Hi,
        Help needed .
    I have an internal table having 6 .
    Ex :
    f1     f2    f3     f4    f5    f6
    a     aa    11    p1  10    10
    a     aa    12    p1  20    20
    b     aa    11    p2  30    30
    b     aa    12    p2  40    30
    Now i want to sum the fields f5 and f6 individually and need to display based upon the fields f1 and f4.
    To Display :
    f1     f2    f3     f4    f5    f6
    a     aa    11    p1  30    30.
    b     aa    11    p2  70    60.
    can anyone help me.How to do this..?
    Thanks

    Here you go
    DATA:
      BEGIN OF cur_tab OCCURS 0,
        f1        TYPE c,
        f2(2)     TYPE c,
        f3(2)     TYPE c,
        f4(2)     TYPE c,
        f5(2)     TYPE c,
        f6(2)     TYPE n,
      END OF cur_tab.
    DATA:
      BEGIN OF sum_tab OCCURS 0,
        f1        TYPE c,
        f4(2)     TYPE c,
        f5        TYPE p,
        f6        TYPE p,
      END OF sum_tab.
    DATA:
      BEGIN OF final_tab OCCURS 0,
        f1        TYPE c,
        f2(2)     TYPE c,
        f3(2)     TYPE c,
        f4(2)     TYPE c,
        f5(5)     TYPE c,
        f6(5)     TYPE c,
      END OF final_tab.
    START-OF-SELECTION.
      cur_tab-f1 = 'a'.
      cur_tab-f2 = 'aa'.
      cur_tab-f3 = '11'.
      cur_tab-f4 = 'p1'.
      cur_tab-f5 = '10'.
      cur_tab-f6 = '10'.
      APPEND cur_tab.
      cur_tab-f1 = 'a'.
      cur_tab-f2 = 'aa'.
      cur_tab-f3 = '11'.
      cur_tab-f4 = 'p1'.
      cur_tab-f5 = '20'.
      cur_tab-f6 = '20'.
      APPEND cur_tab.
      cur_tab-f1 = 'b'.
      cur_tab-f2 = 'aa'.
      cur_tab-f3 = '11'.
      cur_tab-f4 = 'p2'.
      cur_tab-f5 = '30'.
      cur_tab-f6 = '30'.
      APPEND cur_tab.
      cur_tab-f1 = 'b'.
      cur_tab-f2 = 'aa'.
      cur_tab-f3 = '11'.
      cur_tab-f4 = 'p2'.
      cur_tab-f5 = '40'.
      cur_tab-f6 = '30'.
      APPEND cur_tab.
      LOOP AT cur_tab.
        MOVE-CORRESPONDING cur_tab TO sum_tab.
        COLLECT sum_tab.
      ENDLOOP.
      LOOP AT sum_tab.
        READ TABLE cur_tab WITH KEY f1 = sum_tab-f1
                                    f4 = sum_tab-f4.
        IF sy-subrc NE 0.
          WRITE:/ 'Something went very wrong'.
          CONTINUE.
        ENDIF.
        MOVE-CORRESPONDING cur_tab TO final_tab.
        MOVE-CORRESPONDING sum_tab TO final_tab.
        APPEND final_tab.
      ENDLOOP.
      LOOP AT final_tab.
        WRITE:/1 final_tab-f1,
              AT 5 final_tab-f2,
              AT 10 final_tab-f3,
              AT 15 final_tab-f4,
              AT 20 final_tab-f5,
              AT 25 final_tab-f6.
      ENDLOOP.
    and the output
    a   aa   11   p1     30   30  
    b   aa   11   p2     70   60  

  • Help needed on installation of Oracle 9i on Sun Solaris 8

    Hey,
    Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
    Simon

    I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
    Edited by: 916438 on Mar 31, 2012 5:55 PM

  • Help needed on installation of Oracle 9i EE on Sun Solaris 8

    Hey,
    Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
    Simon

    I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
    Edited by: 916438 on Mar 31, 2012 5:55 PM

  • Help needed in Finding Download location for Sun One Portal 7

    Hi,
    help needed for finding download location for Sun ONE Portal 7. I tried to find in Oracle Download page ,
    http://www.oracle.com/us/sun/sun-products-map-075562.html, But unable to find.
    Please share the link for download location.
    I am totally new in Sun ONE Portal.
    Thanks,
    Edited by: 945439 on Oct 5, 2012 3:41 AM

    try edelivery.oracle.com under sun products.

  • Help needed in constructing a tree

    Help needed in constructing a tree. I was wondering if some one can suggest me how to add messages in the second column for both the parent node and child elements.
    I was able to create a tree succefully, but want to add some description in the second column for the first column elements, for both parent and child elements.
    Please suggest me how to add the arrays to second column for parent and child nodes.
    Solved!
    Go to Solution.
    Attachments:
    Tree_fix.vi ‏15 KB

    The Child Text parameter is the one you are searching for. It accepts a 1D string array for the following columns.
    hope this helps,
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • Help needed on CD740 ???

    Help needed on CD740 ? My CD740 is GREAT , well , it was great !!? The sound and general performance are wonderful , but , it now has a fault !!? Shock Horror !!
    What can it be ?!!? Well , the display illumination has failed , as in , there isn't any !!? Have to use a torch to read it !!? Not good. Now , here's the thing , I want a phone number (UK zone) ?to talk to an actual human and I cannot find one !!? That is soooooo annoying !!? The unit is out of warranty so I want to repair this myself , no worries , I once worked for Philips in their pro studio equipment repair workshop so I know my way around black boxes !! I would like a service manual though so that I can get the case apart without damage. So , can anyone help me with a phone number , pretty please ?!!
    Thanx.

    I tried compling servlet, but it is raising error
    that coul not find package javax.servletWhat I did not mention... you need to add those JARs in the Classpath explicitly. You will find them in %TOMCAT_HOME%\common\lib. You atleast need to add servlet-api.jar to your Classpath. :)

  • Help needed with Vista 64 Ultimate

    "Help needed with Vista 64 UltimateI I need some help in getting XFI Dolby digital to work
    Okay so i went out and I bought a yamaha 630BL reciever, a digital coaxial s/pdif, and a 3.5mm phono plug to fit perfectly to my XFI Extreme Music
    -The audio plays fine and reports as a PCM stream when I play it normally, but I can't get dolby digital or DTS to enable for some reason eventhough I bought the DDL & DTS Connect Pack for $4.72
    When I click dolby digital li've in DDL it jumps back up to off and has this [The operation was unsuccessful. Please try again or reinstall the application].
    Message Edited by Fuzion64 on 03-06-2009 05:33 AMS/PDIF I/O was enabled under speakers in control panel/sound, but S/PDIF Out function was totally disabled
    once I set this to enabled Dolby and DTS went acti've.
    I also have a question on 5. and Vista 64
    -When I game I normally use headphones in game mode or 2. with my headphones, the reason for this is if I set it on 5. I get sounds coming out of all of the wrong channels.
    Now when I watch movies or listen to music I switch to 5. sound in entertainment mode, but to make this work properly I have to open CMSS-3D. I then change it from xpand to stereo and put the slider at even center for 50%. If I use the default xpand mode the audio is way off coming out of all of the wrong channels.
    How do I make 5. render properly on vista

    We ended up getting iTunes cleanly uninstalled and were able to re-install without issue.  All is now mostly well.
    Peace...

Maybe you are looking for