Help needed in using Facetime over cellular network on Ipad2 3G IOS6

i updated my Ipad2 3G to IOS6, as they mentioned that i will be able to use facetime over cellular network,
however everytime i try it over the network, it says i must connect through Wifi. any help!!

Facetime over 3G is currently only available on the iPad 3, not the iPad 2 - from http://www.apple.com/ios/whats-new/ :
3. FaceTime video calling requires a FaceTime-enabled device for the caller and recipient and a Wi-Fi connection. FaceTime over a cellular network requires iPhone 4S, iPhone 5, or iPad (3rd generation) with cellular data capability.

Similar Messages

TS4268 using FaceTime over cellular

i cant use FaceTime over cellular/3G i have the iPhone 4 with all updates from iTunes, but all of my friends that also the the iPhone 4 can FaceTime over Cellular theres gotta be something im missing, any help would be appriciated.

Only iPhone 4S and 5 have this capability. Sorry.

Iphone itunes match not working over cellular network. songs are grey but not playing. help

Need help with itunes match on iphone. seems to not play songs over cellular network. songs are grey but no access

Hi rulffers,
From your post I understand that you're unable to play songs from iTunes Match on your iPhone. To troubleshoot this issue please follow the steps in the article below.
How to troubleshoot iTunes Match - Apple Support
Have a great weekend,
Alex H.

How to connect an apple tv to an enterprise network with a username and a password? I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

How to connect an apple tv to an enterprise network with a username and a password?
I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

Contact the University's IT dept, they may be able to set something up on the network to allow the ATV to connect without the need for a user name/password.

TS3367 what can be done if i want to use facetime over my cellular data connection? i have i phone 4 there must be some soultion to at least get the face time audio

please help me guys

No, there is no work around. Facetime over cellular requires at a minimum an iPhone 4s, and that your carrier support the feature. Sorry, but the requirements are what they are.
http://www.apple.com/ios/facetime/

Facetime over cellular not working (at&t)

So we just switched over to an AT&T Mobile Share plan and we're supposed to be able to facetime over cellular now, but it almost never works.
You click on the facetime button, and it just waits and waits and waits, and the person on the other end never gets a request. I know it's not an issue with them not allowing it because we were able to get it to work 1 time out of about 20 attempts (plus it used to give a nasty message and we can setup hotspots now.)
The mobile sharing plan is activated, so facetime should be good to go.
I think what is going on is that it's losing network connectivity. We'll be on LTE, get a phone call, fall off LTE because on AT&T you drop down to 3G when on the phone, and then you hit facetime, and you're still on 3G, and/or your phone hasn't made a connection yet, and then it's stuck in some sort of limbo between cell networks.
It really stinks, because I actually really wanted the ability to do this and was actually going to be using it.
I'm hoping this clears up somehow, or I find a solution... but I'm pretty annoyed. It's supposed to just work, and if it only works 1 time out of 10, I'll just never even try and it's 100% useless.
I'm not sure if this is Apple's fault or AT&T, but I want a solution.
I dropped out of my unlimited data plan to switch over to a mobile share plan, and facetime over cellular was one of the main reasons. If it's not going to work, I'm going to be pretty upset.

More than likely it is an AT&T problem. I have sprint and FaceTime over cellular works great. Not as good quality as wifi but way better than Skype. AT&T is only after your money. With sprint I have unlimited data and not restricted like AT&T does.

Will AT&T support FaceTime over cellular?

Will AT&T support FaceTime over cellular with the new iPhone 5?

I am glad to see that this is getting noticed. I went thru this today
AT&T wants to charge for it. Also caution: If you are "grandfathered" into an unlimited data plan and switch to a new "termed" data plan just to get face time available without wifi your unlimited data plan is no longer valid. Also note that AT&T no longer offers an unlimited data plan at this time so you cannot get it back
I downloaded IOS6 and turned my wifi off and tried facetime. It advised that I need to contact AT&T to make sure I had the applicable data plan.
I had an interesting conversation with AT&T today. They told me that I had to sign up for a new plan.
They fully admit that Facetime is interent based and goes over the internet when connected to wifi. I responded that when wifi is turned off, it goes thru the internet on the phone which is data. Since I have unlimited data they are now restricting my unlimited data. They won't deny that. They only state that AT&T offers a new plan which allows you to use facetime without wifi. I believe it was called "mobile sharing"
I escalated to three different supervisors until there wasn't a higher one present. They commited to have someone call me back tomorrow. I asked that take this as a formal complaint. I also advised that I would be contacting the BBB as they have stepped over the bounds of ethichal behavior.

I need to copy files over the network PSSession . ( Firewall / DMZ / Etc. )

Hello
I need to copy files over the network PSSession . ( Firewall / DMZ / Etc. )
I have a script where I copy from my local server ( server1) to the remote server ( server2 ), but I can´t not make script that will copy from the remote server to my local by my session. From server2 to server1
Script is as below ...:-)
HELP : ....
winrm s winrm/config/client '@{TrustedHosts="SERVER2"}'
$Source = "D:\test\ok.log"
$Destination = "D:\test\ok.log"
$session = New-PSSession -ComputerName SERVER2
Set-StrictMode -Version Latest
## Get the source file, and then get its content
$sourcePath = (Resolve-Path $source).Path
$sourceBytes = [IO.File]::ReadAllBytes($sourcePath)
$streamChunks = @()
## Now break it into chunks to stream
Write-Progress -Activity "Sending $Source" -Status "Preparing file"
$streamSize = 1MB
for($position = 0; $position -lt $sourceBytes.Length;
$position += $streamSize)
$remaining = $sourceBytes.Length - $position
$remaining = [Math]::Min($remaining, $streamSize)
$nextChunk = New-Object byte[] $remaining
[Array]::Copy($sourcebytes, $position, $nextChunk, 0, $remaining)
$streamChunks += ,$nextChunk
$remoteScript = {
param($destination, $length)
## Convert the destination path to a full filesytem path (to support
## relative paths)
$Destination = $executionContext.SessionState.`
Path.GetUnresolvedProviderPathFromPSPath($Destination)
## Create a new array to hold the file content
$destBytes = New-Object byte[] $length
$position = 0
## Go through the input, and fill in the new array of file content
foreach($chunk in $input)
Write-Progress -Activity "Writing $Destination" `
-Status "Sending file" `
-PercentComplete ($position / $length * 100)
[GC]::Collect()
[Array]::Copy($chunk, 0, $destBytes, $position, $chunk.Length)
$position += $chunk.Length
## Write the content to the new file
[IO.File]::WriteAllBytes($destination, $destBytes)
## Show the result
Get-Item $destination
[GC]::Collect()
## Stream the chunks into the remote script
$streamChunks | Invoke-Command -Session $session $remoteScript `
-ArgumentList $destination,$sourceBytes.Length
Remove-PSSession -Session $session

But have will the script look, if i need to copy from
From server2 to server1.
My script copy from server1 to server2 and working, but I need server2
to server1.

How much data is used when using facetime over 4g

How much data is used when using facetime over 4g. Say a 10 min call over facetime, will it use few MB or more.
Thanks,
Manish

It depends on how long you are on line. What you could do is reset your data usage in settings/general/ usage and then start your FaceTime session and check usage after your session

TS3367 How can I activate facetime over cellular (at&t) on my new iPad?

I already downloaded and installed ios 6 to my new iPad. When I try to use facetime over my at&t plan, it says "activation required". Then I went to the at&t website, created at&t account, but I can not activate it. I tried to choose all account types to link them and activate, but it did not work. What should I do?

AT&T has made it such that Facetime over 3G requires a "combined" data plan, contact them for details.

HT1695 How can I connect my MacBook to Internet over cellular network

How can I connect my MacBook to Internet over cellular network?

Read here:
http://support.apple.com/kb/ht4517

Can iPad use facetime with 3g network?

how can u use facetime with 3g network?

As this has nothing to do with the original question, you'll get more and better answers if you start another thread with a properly descriptive subject line.
You may also want to take a look at the manual:
http://support.apple.com/manuals/
Best of luck.

Can you use facetime from cellular iPhone to wifi iPad Mini?

I've noticed I can connect from my iPhone 4S to an iPad Mini when we are both using wifi.
Howver, I cannot connect to the iPad when I am using cellular only (no wifi) on the iPhone (the iPad is wifi only).
I can connect to other iPhones when we both use cellular, so I know it's not an issue due to a carrier restriction of my cellular use (Verizon).
Is there an incompatiblity between using facetime from a cellular device to a wifi-only device? I would have though Apple would have a bridge between internet and cellular data for this.
Thanks

This is copied from the Apple iOS features website.
*FaceTime video calling requires a FaceTime-enabled device for the caller and recipient and a Wi-Fi connection. FaceTime over a cellular network requires iPhone 4S, iPhone 5, or iPad (3rd generation) with cellular data capability. Availability over a cellular network depends on carrier policies; data charges may apply.
Sometimes I find the "small print" to be even more confusing, but the way that I interpret this is that you have to go cellular to cellular. Cellular to WiFi doesn't work. It does seem to make sense, if you are sending the "message" or trying to connect over cellular, the person on the other end would need to pick up the "message" via cellular since it was sent that way by you.

Icloud mail does not work over cellular network after upgrade to IOS 8.1.3

Hi,
Since I did the update to IOS 8.1.3 on my iPhone 6 Plus yesterday, my icloud mails cannot be received/sent with my phone over the cellular network.
In order to make mails workin' I need to be connected to a Wifi network.
All setting are correct on the phone.
How can I fix this **** issue.
Deleted the icloud account already and added it again but that does not help.
Also when I try to connect to iCloud from the iCloud settings it says: Authentication Failed - A server error occurred.
The password is correct.
Please help me.
Jerry

I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.

Using Bridge over a network with others

Would Bridge be a good solution to set up photo library over a network that can be updated and modified with everyone on the network?

I believe that using Bridge to share image files on a network is possible. In fact, we're just about ready to golive with our image library on a network -- using Bridge as the browser.
Here's what I've discovered over the past sevral weeks of testing:
As Ramon correctly points out on this forum trying to share a centralized cache is indeed insane. But, as it turns out, it appears that one share cache files across multiple computers; providing these are Macs using CS4 of course. This is not the bext alternative but short of going with a cataloging system -- not always an choice for some organzations -- this is perhaps the only option available.
2. I indexed our image library on my laptop, which took the better part of a day. Organizationally it consists of 56 folders, containing some 104,000 images for more than 434 gigabytes of space.
3. I then copied the cache (and all files) to an external hard drive.
What I copied was on the following path: user>library>caches>Adobe?Bridge CS4>Cache
4. I then went to a second computer -- networked to connect to the central image library drive -- and before launching Bridge I deleted the old cache file, and then copied the new cache file to the second computer. I then launched Bridge, navigated to the image library in the folders panel, clicked on several folders. One-by-one all the thumbs and previews loaded quickly and the metadata was right there as well, allowing for fairly quick and easy searching. And for us "searchability" is the KEY to having a central image library
5. To add mages -- and here's where ity gets a bit klunky -- I intend to add subsequent folders as new images come in to be catalogued. I will then inform the designers that a new folder has been uloaded to the library -- they already have the path -- and that they will need to index that folder to make the images "searchable.
Hopefully this will work on all our designers' machines as well. I'll know more by the end of next week.
BUT, there are a couple of things to consider:
1. Once a folder is indexed it cannot be moved nor can any of the files inside that folder be moved or manipulated in any way. For example, if you returned to a file to add additional metadata, then each user would have to reindex that particular folder on their local copy of Bridge. Having said that, it's not terribly difficult or challenging. In our case, since the image library is permanent once these folders are indexed and "accessed" on each machine that's it. It's the initial indexing that can take so much time.
2. Make sure that permissions are in place before you golive. In our situation just me and my director have read/write permissions. All others have read only. This allows anyone to pull an image out of the library and use it as they see fit once the copy is on their desktop of course. They simply cannot make any changes, additions or alternations in the existing folders and files ON THE LIBRARY DRIVE.
That's it for the moment.
Stay tuned.

Help needed in using Facetime over cellular network on Ipad2 3G IOS6

Similar Messages

Maybe you are looking for