Help needed installing 6.1 service packs

I have iPlanet Web Server 6.1 SP1 (used /sun-webserver61-sol.tar) installed on my SunOS cococay 5.8 Generic_117350-02 sun4u sparc SUNW,Sun-Blade-1000
I need to install SP3 or 5. I couldnt' find SP3 but
Found and downloaded SP5 116648-17.zip into /software/iplanet/6.1sp5/
Installed 11934-26 first as recommended by readme .
unzip 116648-17.zip /software/iplanet/6.1sp5/116648-17
patchadd /software/iplanet/6.1sp5/116648-17Checking installed patches...
One or more patch packages included in
116648-17 are not installed on this system.
Patchadd is terminating.
So I tried the same thing with the most recent patch 61SP8 and get the same response.
downloaded Patch (24832561)
116648-20 :Title: Sun ONE Web Server 6.1 Solaris-Sparc Patch WS61SP8
Then I uninstalled 6.1 with SP1 and tried to install 116648-17 but get the same error.
What am I doing wrong?
Thanks!
MJ

Hi Guys,
Does anyone know where I can download SP3 as I cannot locate it anywhere. I currently have SP1 installed and need SP3 to clone another install elsewhere.
Any help would be much appreciated.
Thanks,
AQ

Similar Messages

Unable to install SQL 2005 Service Pack 3 (Unable to install Windows Installer MSI file)

I'm unable to install SQL 2005 Service Pack 3. This results in the following error message: Unable to install Windows Installer MSI file.
Could someone please help me. Thanks in advance!
=== Verbose logging started: 3-4-2009 9:33:00 Build type: SHIP UNICODE 4.05.6001.00 Calling process: d:\5ddfa356349ddf2e676c336d95c5\hotfix.exe ===
MSI (c) (E0:88) [09:33:00:404]: Resetting cached policy values
MSI (c) (E0:88) [09:33:00:404]: Machine policy value 'Debug' is 0
MSI (c) (E0:88) [09:33:00:404]: ******* RunEngine:
           ******* Product: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
           ******* Action:
           ******* CommandLine: **********
MSI (c) (E0:88) [09:33:00:404]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (E0:88) [09:33:00:404]: Grabbed execution mutex.
MSI (c) (E0:88) [09:33:00:419]: Cloaking enabled.
MSI (c) (E0:88) [09:33:00:419]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (E0:88) [09:33:00:419]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (28:28) [09:33:01:747]: Running installation inside multi-package transaction C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
MSI (s) (28:28) [09:33:01:747]: Grabbed execution mutex.
MSI (s) (28:CC) [09:33:02:029]: Resetting cached policy values
MSI (s) (28:CC) [09:33:02:029]: Machine policy value 'Debug' is 0
MSI (s) (28:CC) [09:33:02:029]: ******* RunEngine:
           ******* Product: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
           ******* Action:
           ******* CommandLine: **********
MSI (s) (28:CC) [09:33:02:685]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (28:CC) [09:33:03:450]: File will have security applied from OpCode.
MSI (s) (28:CC) [09:33:03:841]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi' against software restriction policy
MSI (s) (28:CC) [09:33:03:841]: SOFTWARE RESTRICTION POLICY: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi has a digital signature
MSI (s) (28:CC) [09:33:04:841]: SOFTWARE RESTRICTION POLICY: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi is permitted to run at the 'unrestricted' authorization level.
MSI (s) (28:CC) [09:33:04:888]: End dialog not enabled
MSI (s) (28:CC) [09:33:04:888]: Original package ==> C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
MSI (s) (28:CC) [09:33:04:888]: Package we're running from ==> C:\WINDOWS\Installer\3d3a713.msi
MSI (s) (28:CC) [09:33:05:497]: APPCOMPAT: looking for appcompat database entry with ProductCode '{53F5C3EE-05ED-4830-994B-50B2F0D50FCE}'.
MSI (s) (28:CC) [09:33:05:497]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (28:CC) [09:33:05:685]: MSCOREE not loaded loading copy from system32
MSI (s) (28:CC) [09:33:05:825]: Note: 1: 2203 2: C:\WINDOWS\Installer\2f1994e.msi 3: -2147287038
MSI (s) (28:CC) [09:33:05:825]: Opening existing patch 'C:\WINDOWS\Installer\e6ba0.msp'.
MSI (s) (28:CC) [09:33:05:825]: Note: 1: 2203 2: C:\WINDOWS\Installer\e6ba0.msp 3: -2147287038
MSI (s) (28:CC) [09:33:05:825]: Couldn't find local patch 'C:\WINDOWS\Installer\e6ba0.msp'. Looking for it at its source.
MSI (s) (28:CC) [09:33:05:825]: Resolving Patch source.
MSI (s) (28:CC) [09:33:05:825]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (28:CC) [09:33:05:825]: User policy value 'DisableMedia' is 0
MSI (s) (28:CC) [09:33:05:825]: Machine policy value 'AllowLockdownMedia' is 0
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Media enabled only if package is safe.
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Looking for sourcelist for product {EE92F683-5F5C-4970-BB0B-9AC591B60268}
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Adding {EE92F683-5F5C-4970-BB0B-9AC591B60268}; to potential sourcelist list (pcode;disk;relpath).
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Now checking product {EE92F683-5F5C-4970-BB0B-9AC591B60268}
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Media is enabled for product.
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Attempting to use LastUsedSource from source list.
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Trying source \\NF04\d$\3db7739bf5c1bb9c50076c418420\HotFixSqlSupport\Files\.
MSI (s) (28:CC) [09:33:06:607]: Note: 1: 2203 2: \\NF04\d$\3db7739bf5c1bb9c50076c418420\HotFixSqlSupport\Files\SqlSupport.msp 3: -2147287037
MSI (s) (28:CC) [09:33:06:607]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
MSI (s) (28:CC) [09:33:06:607]: Note: 1: 1706 2: -2147483647 3: SqlSupport.msp
MSI (s) (28:CC) [09:33:06:607]: SOURCEMGMT: Processing net source list.
MSI (s) (28:CC) [09:33:06:607]: Note: 1: 1706 2: -2147483647 3: SqlSupport.msp
MSI (s) (28:CC) [09:33:06:607]: SOURCEMGMT: Processing media source list.
MSI (s) (28:CC) [09:33:07:654]: SOURCEMGMT: Resolved source to: 'SqlSupport.msp'
MSI (s) (28:CC) [09:33:37:732]: Note: 1: 1314 2: SqlSupport.msp
MSI (s) (28:CC) [09:33:37:732]: Unable to create a temp copy of patch 'SqlSupport.msp'.
MSI (s) (28:CC) [09:33:37:732]: Searching provided command line patches for patch code {EE92F683-5F5C-4970-BB0B-9AC591B60268}
MSI (s) (28:CC) [09:33:37:763]: Note: 1: 1708
MSI (s) (28:CC) [09:33:37:763]: Product: Microsoft SQL Server Setup Support Files (English) -- Installation failed.
MSI (s) (28:CC) [09:33:37:763]: Windows Installer installed the product. Product Name: Microsoft SQL Server Setup Support Files (English). Product Version: 9.00.4035.00. Product Language: 1033. Installation success or error status: 1635.
MSI (s) (28:CC) [09:33:37:779]: MainEngineThread is returning 1635
MSI (s) (28:28) [09:33:37:888]: No System Restore sequence number for this installation.
This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package.
C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
MSI (s) (28:28) [09:33:37:888]: User policy value 'DisableRollback' is 0
MSI (s) (28:28) [09:33:37:888]: Machine policy value 'DisableRollback' is 0
MSI (s) (28:28) [09:33:37:888]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (28:28) [09:33:37:904]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (28:28) [09:33:37:919]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (28:28) [09:33:37:919]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (28:28) [09:33:37:919]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (28:28) [09:33:37:919]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (28:28) [09:33:37:919]: Restoring environment variables
MSI (c) (E0:88) [09:33:37:935]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (E0:88) [09:33:37:935]: MainEngineThread is returning 1635
=== Verbose logging stopped: 3-4-2009 9:33:37 ===

This post should definitely help you
http://blogs.msdn.com/sqlserverfaq/archive/2009/01/30/part-1-sql-server-2005-patch-fails-to-install-with-an-error-unable-to-install-windows-installer-msp-file.aspx?CommentPosted=true
Feroz
Mark as Answer if it helps. This posting is provided "AS IS" with no warranties and confers no rights.

Error in Configuration Wizard after installing SharePoint 2013 Service Pack 1

Windows Server 2012 with latest updates and SharePoint 2013 with latest updates:
I installed SharePoint 2013 Service Pack 1 and when I run the configuration Wizard i get this error:
Error in Configuration Wizard
Resource id to be retrieved is PostSetupConfigurationFailedEventLog for language English (United States)
Resource retrieved id PostSetupConfigurationFailedEventLog is Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information
located at {0}, fix the problem, and run this configuration wizard again.
Leaving function StringResourceManager.GetResourceString
Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web
Server Extensions\15\LOGS\PSCDiagnostics_3_8_2014_23_55_49_686_1872915373.log, fix the problem, and run this configuration wizard again.
In event view I see this two errors:
1) First error
System
Provider
[ Name]
SharePoint 2010 Products Configuration Wizard
EventID
104
[ Qualifiers]
0
Level
2
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-03-08T21:41:59.000000000Z
EventRecordID
135580
Channel
Application
Computer
ABC-SRV-WEB01.abc.local
Security
EventData
Failed to initiate the upgrade sequence. An exception of type System.MissingMethodException was thrown. Additional exception information: Method not found: 'Void Microsoft.SharePoint.WorkflowServices.IWorkflowService.Upgrade(System.Object,
System.String, Microsoft.SharePoint.Upgrade.SPLog)'. System.MissingMethodException: Method not found: 'Void Microsoft.SharePoint.WorkflowServices.IWorkflowService.Upgrade(System.Object, System.String, Microsoft.SharePoint.Upgrade.SPLog)'. at System.RuntimeTypeHandle.GetTypeByName(String
name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type) at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError,
Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName) at System.Type.GetType(String typeName) at Microsoft.SharePoint.Utilities.SPTypeSerializer.DeserializeType(String typeName,
Guid classId, Boolean bResolveMissingTypes) at Microsoft.SharePoint.Administration.SPConfigurationDatabase.ResolveObjectAndClassVersions(SPLog log) at Microsoft.SharePoint.Upgrade.SPManager.BootStrap(Guid sessionId, SPUpgradeOperationFlags flags) at Microsoft.SharePoint.PostSetupConfiguration.UpgradeBootstrapTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
2) Second error
System
Provider
[ Name]
SharePoint 2010 Products Configuration Wizard
EventID
100
[ Qualifiers]
0
Level
2
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-03-08T21:41:59.000000000Z
EventRecordID
135581
Channel
Application
Computer
ABC-SRV-WEB01.abc.local
Security
EventData
Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web Server
Extensions\15\LOGS\PSCDiagnostics_3_8_2014_23_41_9_710_572545016.log, fix the problem, and run this configuration wizard again.
Please advise on next steps.
How can I successfully install SP1?
Thanks,
Alex

could you please share the upgrade log file, so that we understand the error?
did you reboot your server after the installation of SP1?
also try to clear the Config cache on the servers and then try again?
you can run this command on the server its failing
Get-SPProduct -local
PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

TypeLoadException after install SharePoint 2013 Service Pack 1

After install SharePoint 2013 Service Pack 1 Russian I got the following error (approximate translation from Russian):
TypeLoadException: Method 'Upgrade' does not implemented in 'WorkflowServiceApplicationProxy'
Any ideas how to workaround it?

Hi,
Please post your ULS logs here.
Please remember to click 'Mark as Answer' on the answer if it helps you

Vista itunes not installed correctly. Error 7. Windows error 998. Itunes helper not installed correctly. Service Apple Mobile Device failed to start. Insufficient privileges.

OK, spent about 25 frustrating hours so far this weekend doing everything recommended on numerous threads here -- uninstalling and reinstalling itunes and all Apple items. Help?
I am using Windows Vista home premium. After the last iTunes update to 12, it suddenly would not work. I followed, to a T, all instructions to uninstall all Apples software, in the correct order, reboot, download the latest iTunes, run as administrator, plug in the iPhone 5S, let the driver install, and then finish.
Along the way, I received the error that "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." I am the administrator and have privileges. (I previously followed instructions from anther thread to change the read-only privileges for Apple folders, but to no avail. I also deleted every file with the word Apple in it after I uninstalled everything.) I did a retry and then an ignore during installation of the AMD error, which I have received 10 times.
The other error I keep getting is: "iTunesHelper was not installed correctly. Please reinstall iTunes. Error 7." I have done that 20 times.
Other frequent error: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 998)."
I followed other threads suggestions to install Windows .NET versions 3.5 and 4.0. No help. I also looked for various specific Apple files in various folders for DLLs, etc. Not present. I have rebooted 50 times and tried different users on my home account as well. Nothing.
I also followed instructions to Manage my computer under "services." Under Apple Mobile Device, the setting is for "automatic." When I try to get it to "start," the error I receive is "Windows could not start the Apple Mobile Device on Local Computer. Error 1053: The service did not respond to the start or control request in a timely fashion." (I followed previous thread instructions to use the CMD prompt to stop it. That caused problems because the status was then "stopped," but I was able to restart it later once I figured that out -- but with the 1053 error again.)
I think I've tried every suggestion in every thread for the four errors I keep getting (AMD failed to start; iTunesHelper Error 7; Windows error 998; and AMD Error 1053.) I am fresh out of ideas and very frustrated. I mostly want to make sure I don't lose my music and photos, which I was about to sync.
The only other thing I see that is strange on my computer (which I discovered along the way) is that I cannot receive automatic windows updates and have not had an update since 2012. My iTunes worked a month ago, so that was obviously not a show-stopper in the past, but perhaps there is a Vista update I need for iTunes 12? I have service pack 2 for Vista. I have followed all threads to try to set my windows to automatic update, but no joy there either. It checks for updates and then fails. I followed instructions and did run an installation to install windows automatic updates, but that doesn't work either. I tried 10 times. It runs and takes a while, but is never able to successfully update windows. It says "checking for updates" for a while. Then it dies. My last update was 6/19/12 (failed) and it says the most recent check was 6/22/12, but I have tried 20 times on 10/31/14 and 11/1/14.
When asked to "Install new Windows Update software" to check for updates, I have done so 10 times. It downloads and installs, but never works.
It's an old Dell desktop computer from 2006, and I'm using an iPhone 5S. I am fresh out of ideas. Anyone really smart here?
Thanks.
Tristan

Upon latest reboot, I also received this error message: "The application failed to initialize properly (0xc0000005). Click OK to terminate the application."
Then I got the iTunesHelper not installed correctly error again.
Then the "Windows can't check for updates" error message.
Then "Apple Push has stopped working." Then a quick DEP error message that disappeared but said something about Apple Push being closed.
I'm also getting denials of service logged by McAffee. Not sure if I'm getting a virus/attack or not.
Not sure if it's a problem with my old desktop machine, my Windows Vista updates, or iTunes, but I'm very frustrated and out of ideas to try.
Thank you for your help!
Tristan

Is it possible to install drivers without service pack

Hi all, I just got my creative zen 8gb player but I am having a problems syncing to the computer. My problem is that I can not install service pack or 2 because my windows somehow does not allow it. So my question is, is there any way I can install some sort of program that would detect the device and be able to transfer over music? Ive tried it on my sisters computer with sp2 and it worked perfectly but I need it to work with my computer which does not have sp2 and will not be able to. -Thanks in advance

Even if your friends product is legit it's in use & the license is only good for one computer. That's why you can't update it. Microsoft did not become the giant it is without safeguards built in the software. Yes you have an O.S. but you can't update it. Makes your system very vulnerable to attacks from viruses & malware because of it. If he is no longer using it then you may be able to get Microsoft to help you get it updated. As I'm sure you know suppose the copy is legit & you had to change the motherboard & other major components like the processor. You could have a problem with windows not validating the copy as legit. So call them or buy one.

Installing Windows 7 Service Pack 1

Hello
I am unable to install Service pack 1 for Windows 7 home premium (OEM edition) and a couple of other updates, in the past the macbook has downloaded and installed windows updates fine, In this instance it downloads but I get a error message error 800B0100. I have tried everything down the windows path but have got nowhere, a search on the web suggests that while some people install this update on a Bootcamp partition others cannot.
Can anyone help.
Thanks
Stephen

You have OS 10.7 but not Bootcamp 4?
Friend of mine on OEM non Mac has similar long standing SP1 problem; as a possible/last solution,
http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/64611492- 58b5-49d7-845e-59fb53c1c48f/
I see from search for W 7 SP1 error 800B0100 in Windows forums:
rename the \Windows\SoftwareDistribution folder to \Windows\SoftwareDistribution.old.
I learned (by doing it) that you can rename outside of safe mode in same login session if you disable Windows Update completely via control panel. Then you could turn W. Update back on & try again.
You will see more on this from Microsoft itself by search for: rename \Windows\SoftwareDistribution

Cannot install windows 7 service pack 1 on my HPE-400z desktop

I have an HP hpe-400z desktop pc. It is running windows 7 home premium operating system. Ever since Windows 7 SP1 came out, my pc has been trying to install it. Every time it tries to install, during the boot process the install fails and the system reverts back to original settings. I get the error message E_FAIL (0x80004005). I have tried letting the automatic updater install this sp1 and I have also downloaded it, running the update, and then the same thing happens. I have tried it without my security software running and get the same result. This has been going on for so long now that I do not even bother to watch my machine boot up,- I know it is going to boot twice due to the failure of installing sp1. Please help!

I would suggest you download the Win 7 Readiness Tool (see list of OS versions) located here
The System Update Readiness Tool can help fix problems that might prevent Windows updates and service packs from installing. For example, an update might not install if a damaged system file prevents the update from recognizing the version of Windows that's running on your computer.
If your computer is having problems installing an update or a service pack, download and install the tool, which runs automatically. Then, try installing the update or service pack again.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

ITunes problems after trying to install Windows XP service pack 2

Hey guys, I've been having trouble with my iTunes among other programs recently, and I was wondering if anyone might be able to help. Basically, my iTunes has been acting strangely ever since I tried upgrading my Windows XP system with Service Pack 2. When it ran through installation, it got all the way through. However, once I rebooted the computer, it told me it was unable to complete due to an unstable system. So it told me to uninstall the software, and I removed it from my program list.
Unfortunately, once I complete removed it from my hard drive, several programs on my machine started to malfunction. Now, whenever I try to play iTunes, it just stops working all of a sudden along with the rest of the sound software on this computer.
The big problem is, I forgot to back up my system before I did all this, so now I'm worried that I'm stuck with this dysfunctional hybrid of a computer system. So now, I've tried reinstalling the old Service Pack 1 onto the computer, but it always seems to cancel in mid-installation.
I know this is probably of a topic that should be posted, on an XP forum, but I was hoping that maybe someone on here might be able to give me some advice on how to solve this problem. If not for my computer, than perhaps at least for my iTunes trouble.
Thanks to all who might be able to help.

The reason I would think your iTunes stopped working is because your system is no longer compatible as iTunes requires Windows XP SP 2 in order to work properly.
If you want to back up your iTunes content then I would suggest opening My Documents>My Music and choose the whole iTunes folder and move it to an external drive. That is normally where all your content is saved, unless you didn't have 'Copy files to iTunes Music folder when adding to library' selected in iTunes then you might want to use the whole My Music folder as your backup.

Install the latest Service Pack and Cumulative Update

Hi Expert,
I am installing SAP on SQL SERVER 2008 R2. The database software installation is done,but as per
installation guide it is recommending to install "Service Pack and Cumulative Update" as SAP Notes 62988
Please suggest me if i donot install service pack then will it impact our installation?
Please relply ASAP.

Its always recommanded to have your database at patch level and cummulative update supported by SAP.
If you don't perform now then you have to take again downtime to perform this activity.
Regards,
Nikunj Thaker

Slipstreaming: Creating a WindowsXP Install CD with Service Pack 2

Hi,
Could someone who has done this using a Mac, and knows how, please give a step by step to making this CD? All the instructions online show how to do it from a PC running Windows. I have no clue how to do it on a Mac. Could someone please explain? I have a legitimate copy of XP Home, and have downloaded WindowsXP-KB835935-SP2-ENU.exe. Now What?
Thanks!

You can use the command line mkisofs to create a disc image after the slipstreaming and then burn with Disc Utility. The only process that really requires a Windows machine is the "applying SP2 patch to the data from the XP install disc" part of the operation since it actually runs a Windows executable (the service pack executable) on the XP install disc (instead of what you normally do which is install SP2 on your live installed version of XP)
I used VirtualPC for that ONE step, and did everything else in OS X.
As for those that did SP1 installs, I installed from an original Volume license Windows XP Professional CD (not SP 2) and managed to boot Windows and install some drivers, but got lots of hangs and had to force reboot a couple times. You cannot install SP2 afterwards, hence the SP2 requirement for Boot Camp.
(posting this from XP on my MBP )

Help needed installing JCE on RHEL4

Hello friends,
I have downloaded the jce1_2_2.zip file. Need help on installing it. J2sdk 1.4.X is installed but still I am getting error like Unallotable Package JCE. Thats why I downloaded this file and now dont know how to install it. Even the instrauctions I found are clear.
Please suggest me.
Its urgent.
Thanks

I'm not sure on that model as I haven't seen one so don't know how the bios works. You'll have to try using some of the arrow keys to see how to move the CD to above the hard drive. When it boots up it have an F12 option (at the same time you see the F2 prompt to enter the bios) that takes you to the Boot Manager Menu, but like I said, they don't sell that model over here so I've never seen it so I don't know if it's there or not. You'll need to ask over in the Euro forum where they sell it how that works.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Help needed -- Install MI client on Win 32

Hi,
I want to install a MI client on my desktop for MI app development with NW 7.0. The way I used is to install it by url. The url is determined and service for installing it through url is enabled. On the installation page I tried both the awt and jsp installation but got the same error message:
Load the following file to your mobile device: *
No installation file exists yet for selected component. *
Can anyone help me with it? I'm a newbie. Thanks a lot!
Best regards,
Hadrian

Hi Sivakumar
First, thank you a lot! I read a forum thread about client installation through URL. It says someone needs to upload the installation file first. And now by your help I know how to do it. But there is a new problem. On the Mobile Archive Converter page, there is a message "Could not connect to middleware" under the page title "Mobile Archive Converter". All input fields, except the dropdown list "Application type" and the checkbox "Link to SAP MI Homepage", are not enabled. And there is no content inside the dropdown list "Application type". Do you have any idea about that?
Besides that, should a link to the mobile administrator be visible under the mobile infrastructure menu on NW admin page? And I can't find any mobile admin related roles, like "SAP_JAVA_NWMOBILE_HG_ADMIN". Do you know what's the reason?
Btw, this morning I used a .sca client installation package to install the jsp client environment. And I succeeded in the initial synchronization with my NW server.
And thank you again!
Regards,
Hadrian

Help need in Java Web Service method receiving object values as null

Below is my web method and Package is the object received from dotnet client as a consumer. I have also defined the Package object structure. Now when I receive the data from dotnet I get only identifier value, but I get ownerid and price as null, even both values are sent by Dotnet client. I want to know whether only primitive datatype in java web service works or I need to do some configuration changes in order to have build in Wrapper class datatypes? It would be a great help if somebody explains.
@WebMethod
@WebResult(name = "PackageId")
public long createNewPackage(@WebParam(name = "Package") com.db.radar.wl.data.Package data1,@WebParam(name = "PackageDetail") PackageDetail data2,@WebParam(name = "PackageTrade") PackageTrade data3);
public class Package {
Long ownerid;
Double price;
long identifier;
}

Hi ,
I am getting the same error. I am running my application on jboss-4.0.4.GA. Please let me know the version of jboss that you to got it working.
Thanks
Viv

Error with DQS after Installing SQL Server Service Pack 2

When I open the DQS client, I get this error message:
Message Id: VerificationFrameworkVersionNotCompatible
A new version of .NET or Data Quality Services was installed on this machine. In order to continue to work with DQS please run 'DqsInstaller.exe -upgrade'.
However, when I run DQSInstaller.exe, I get this message:
DQS Installer has detected a previous DQS installation under this SQL server instance. Running DQS installer will remove the previous installation, together with all the knowledge stored in it.
Will I lose all my knowledge bases? Is there an upgrade path?

Hi Adolfo Socorro,
According to your description, when you install SQL Server 2012 Service Pack2, the error of
Data Quality Services (DQS) will occur. The cause is that Product Updates will not update the schema of the DQS catalogs, any related MDS catalogs, and the SQL CLR assemblies kept the DQS catalogs. Therefore, extra steps may be required
if the DQS catalog schema needs to be upgraded, or the DQS CLR assemblies have been upgraded by the product update.
If you have previously run the DQSInstaller.exe to build the DQS_MAIN, DQS_PROJECTS, and DQS_Staging_Data catalogs in one or more of the updated instances, you
may need to continue to do the necessary upgrade steps to upgrade the database schemas, such as launch CMD as Administrator
cd "C:\Program Files\Microsoft SQL Server\MSSQL11.InstanceName\MSSQL\Binn" DQSInstaller.exe –upgrade
There is an article about upgrading DQS, you can review the following article.
http://social.technet.microsoft.com/wiki/contents/articles/8442.upgrade-dqs-installing-cumulative-updates-or-hotfix-patches-on-data-quality-services.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Help needed installing 6.1 service packs

Similar Messages

Maybe you are looking for