Help needed - JavaBeans in forms

Hi there - can anyone out there help me with this?
As part of a new project, I'll be trying to implement a JavaBean in a form; specifically, I'll be implementing the multi-select tlist bean.
This is not something I've done before, so I'd be grateful if someone could point me in the direction of any documentation or on-line tutorials on the subject.
Many thanks, Geoff

otn.oracle.com/products/forms
Look for some of the white papers and dowload the 9i demo - there is a multi select java bean in there.
Grant Ronald
Forms Product Management

Similar Messages

Help needed with this form in DW

Hi, i have created this form in dreamweaver but ive got this problem.
In the fields above the text field, the client needs to fill in some info such as name, email telephone number etc.
But the problem is when ill get the messages. Only the text from the large text field is there.
What did i do wrong??
http://www.hureninparamaribo.nl/contact.html
Thank you
Anybody??

Thank you for your response. So what do i have to do to fix this?
Date: Sun, 20 Jan 2013 07:57:56 -0700
From: [email protected]
To: [email protected]
Subject: Help needed with this form in DW
    Re: Help needed with this form in DW
    created by Ken Binney in Dreamweaver General - View the full discussion
You have several duplicate "name" attributes in these rows which also appears in the first row
Telefoon:
Huurperiode:
Aantal personen:
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5008247#5008247
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5008247#5008247
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5008247#5008247. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver General by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Help needed in RTF form field to display yes or no based on xml value

Hi,
I have the data in xml as follows: <CP_ZERO_COST>2</CP_ZERO_COST>
Now my requirement is, if CP_ZERO_COST is 2 then the column should display 'No' and if CP_ZERO_COST is 1 the column should display 'Yes'. Now this 'yes' or 'no' is not coming in xml tag. I need to do that in RTF form field.
Could anyone please tell me how to do that?
Please help.
Thanks

Try this:
<?choose:?>
<?when: CP_ZERO_COST = 2?><?'NO'?>
<?end when?>
<?when: CP_ZERO_COST = 1?><?'Yes'?>
<?end when?>
<?otherwise?><?CP_ZERO_COST?> --- You don't have to include this if the only possible values are 1 and 2.
<?end otherwise?>
<?end choose?>
You can also use if then else logic. Ensure that you specify the correct path to get to CP_ZERO_COST
Thanks!

Help needed in XML Form Builder

Hi All,
I require your help in XML form .
when we create a XML form in Builder we can define some caption values such as $sap_user , $ locDate which displays the
user id and date in the respective field when the form is opened.
I need to dispaly the phone number,department etc from the LDAP /UME to my from .
How can i get it .
Please help.
Regards,
Nitesh

Which environment are you trying this in ? In Enterprise server, bursting is defined by a SQL query which can be run against the table that you want. So you can even populate the printer name from your query. So the URI, ipp://myprintserver:631/printers/printername" is the syntax. In your case you have to create this string in your SQL query by concatenating the parts "ipp://" + printername + ":631/". If there is a name to the printer in the printserver, then that too can be concatenated.
In case this is in EBS , the same has to be done in the control file.

Help needed on Populating forms

Hi,
I am new to Apex and would appreciate any help regarding this.
The scenario is as follows: I need to have a form which can be saved and edited each time user logs in untill the user presses submit button. Now I have created a form (with text, radiogroup, checkboxes LOV's etc) which inserts the data entered and selected by the user to the database when he presses 'save'. But the next time the user logs in, I am unable to display the form with the previously entered data. How do I populate the database values to the form (As I mentioned before, the form contains radiogroup, LOV'S etc) ?
Thank you.
Regards,
Sumana

Hi,
Sorry for late reply... and thank you for sending the link...
Priyanka, I checked out the link... its fine... but thats not my requirement...
it is as follows:
1) there is login page...with login_info table and user_id as primary key
2)a form whose data is stored in a table with user_id as foreign key.
3)form has 2 buttons- create and apply changes.
4)for the first time...user enters data and clicks create.
5)when he logs in for 2nd time...the data he entered previously must be populated into the form...so that he can update it and save t by clicking apply changes button...
now how do i populate data of that particular user when he logs in? Do i use sessions?
And regarding automatic dml...its working fine...but automatic row fetch is not happening... So, i have written a separate procedure..by which i can now populate forms when i have hardcoded user_id...
how to do this dynamically?

Help needed with my form - PLEASE!

My form on avarislaw.com is working properly.
The form attach file area should not be mandatory but for some reason it still apears even when I change this in BC.
Please help!
Thanks
Andy

You need to remove the javascript validation for that form element in the HTML of the form as well.

Help needed with fillable form

I have created a form in Adobe, which was very easy. However, when it was emailed out to other users, several commented that they couldn't make revisions to it. Most of the users had either Flash or Reader, not many having Standard or Professional. After some research, I found the Submit Form button, which looks like it would work, but I need some assitance on making sure it formatted correctly. I also need some assistance on setting up a siguature and using it. I have utilized the Help function while working on the form, but it doesn't seem to get me anywhere.
If anyone has any experience with a form like this, I would appreicate any help!

Looks like the LiveCycle recommendation is appropriate since you did not create the form in Acrobat. The techniques for working forms is different in Designer and the form cannot be edited in Acrobat once Designer is used. I would have to look at the form in Designer on my other machine at work to provide any comments, but the other forum should lead to more useful feedback.

Urgent help needed to setup Forms 6i Server on Windows Server 2003

Hello,
I am trying to install Forms 6i Server from the Forms/Reports 6i Release 2 CD onto a server with Windows Server 2003 Standard Editon (services pack 1) installed.
The Oracle Installer produced the following error when I tried to install the Forms 6i Server From the Forms/Reports 6i Release 2 CD:
user1.pin(20); os_error while spawning ifsrv60 -install forms60server port=9000 mode=socket batch=yes.
Has anyone successfully installed Forms 6i Server from Forms/Reports 6i Release 2 CD onto a Windows Server 2003 server?
Any help is appreciated.
Phil

You it obtained to install the FORMS 6i SERVER in Windows 2003 ?
I am with the same problem and not yet I obtained solution.

Hi help needed in Smart form using BAdi ( please any one help me )

Hi,
    I am working in SRM.I am new to SRM and smartforms .My problem is I need to change the stndard smarform for BBP_BIDINV_BID into zprogram for The text for Published Bid Invitation email should read as:xxxxwith emp name and date,The text for email when Bid is rejected :XXXx,Accepted,Returned.I need to attch the text using BAdi's .So can any one help me how to find out the suitable BADi to this and please send me process to do the oject..
thanks in advance.
   Regards
     Uday

Hi,
check this BADI :
BBP_OUTPUT_CHANGE_SF
Regards
Appana

Help needed from Oracle form 6i developer and oracle applications 11i

I am looking for an Oracle Technical ebusiness suite SCM freelancer with solid experience and strong knowledge of oracle forms 6i.
Role will be to develop a new simple form and integrating this developed custom form with oracle standard form in Oracle applications 11i
More details will be provided later on and ready to negotiate the price for this project..............
It should not take more than 10 days to complete this project. Interested candidate should let me know asap.
Edited by: user8725114 on Aug 17, 2009 8:18 PM

Hi,
Try the built-in procedure WEB.SHOW_DOCUMENT. See some examples in the on-line help of Forms.
You can call this built-in procedure in a Form level trigger , called 'KEY-HELP' (when the user presses the <Ctrl>+<H> buttons) , or if you have a button on the form use the trigger 'WHEN-BUTTON-PRESSED'.
Hope the above will help you...
Simon

Help needed with online form

I have developed an HTML online form that is 2 part. the html
form itself that my employees access thru our network, fill out and
submit. this is a document change request. I have set up two
departments selectable by radio button. I thought that when one is
selected, that when the submit button is clicked to send the email
request out, that some how based on which button was checked, then
the email would go to that department. example: one department is
"PCBA" which is myself. One department is "INTERCONNECT" which is
Joes department. if the "INTERCONNECT" radio button was selected,
then the email would go to joe. If the "PCBA" radio button was
selected, then the email would come to myself.
I'm not sure how to code this. I can send both my HTML form
and Cfmail form to anybody to review if that would help.
Thank you.

I am using Dreamweaver and in the split view mode
(Design/Preview), I can see my code but the preview pane is blank.
When my email form would not work, I could see the form in the
preview pane. However now that the form works, It will not show in
the preview pane. I know that my IT mgr. moved some tags around
that enable the form to work. Howerver, I think something is still
out of wack because I believe that I should still be able to view
this in the preview mode.
I apologize for this, but I am new to this Cold Fusion stuff,
and this is my first attempt.
Barry

Help needed with tabular form

hello,
I have a table with an flag_indicator whose default value is 0 which is of number datatype.
and I am displaying the column falg_indicator it as a standard report column in my tabular form with value 0.
but the thing is that now I want to display te column as " NO" in my tabular form (shouldn't be editable column)
jst want to display as "NO" in my column instead of 0.
can anyone help me out with this.
thanks.

Hi,
If you change your column in select use decode function ?
Something Like this
DECODE(your_column,'0','NO',your_column) AS your_column_nameBr, Jari

Help Needed with Email Form Confirmation

I have created an email form that curently defaults to the
home page. Is there a way to have it go to a confirmation page? I
am sure there is something in the HTML Language, but not sure?
Thanks in advance

I like an easy life!
Take a look at bebosoft.com
Formstogo- Purists may object but it works with cgi, php and
asp. can show
error and success pages as well as send the sender a
confirmation email.
OH! almost forgot It's very expensive you may need a morgage
$18 with life time support and I think upgrades.
Used it for a few years
cheers
Ian
"bryanbcorny" <[email protected]> wrote in
message
news:e4svap$fut$[email protected]..
>I have created an email form that curently defaults to
the home page. Is
>there
> a way to have it go to a confirmation page? I am sure
there is something
> in the
> HTML Language, but not sure?
>
> Thanks in advance
>

Help needed in setting form values

I have following fields in the form
Radio boxes - Grant and Deny
Text Area - User comments
Buttons - Submit Cancel
I want the user comments field 'Required' only when we select 'Deny' option
For Grant- it should not be required.
If we select Deny option and click on Submit, it should say - Missing Value in the required field - User Comments.
Please guide.

I added a validation on Subit button as -
If user commets are null and deny is selected - give error message..
It worked.

Help needed with a form button

Two years ago I designed a form with a button that opened an email screen so the document could be emailed to several people. The form was built in Acrobat Pro 9 with an XP operating system. The form was put on the company wiki and worked perfectly until about six months ago. Now the button doesn't work at all for some people and others get a message about whether they want to send a link or a copy. When they choose to send a copy, the recipient receives a blank form. The form still works perfectly on my computer. Does the fact that many of the employees now have new computers with Windows 7 on them make a difference? How can I get this form to work for everyone?

with 1.4 you can also set the dialog to "undecorated" meaning you can have a modal dialog w/o the titlebar. InstallAnywhere has a similar progress interface and I think it looks really sharp. You can set an etched border or something on it so it looks good. A progress dialog with no buttons but a titlebar would look a bit goofy I think.

Help needed - JavaBeans in forms

Similar Messages

Maybe you are looking for