Help needed - K7N2G-ILSR problem

I just got a K7N2G-ILSR mobo and after I installed it, I get an error "NO DRIVE ATTACHED TO FASTTRACK CONTROLLER. NO BIOS INSTALLED"
I downloaded the latest bios and flashed it but I still get the same error.
When I am in the setup, it recognizes my harddrive (which is a Maxtor IDE).
I'm not using serial ATA.
Please help me figure this out.

the problem is that after i get that error message, it takes me to the windows safe mode menu. after i pick a windows mode to start up with, it re-boots only to bring me back to the original error message.
i can't boot into windows.
here are my specs if this helps any...
K7N2G-ILSR
Athlon XP 2600
Corsair XMS pc2700 512mb ram
Maxtor hard drive (8gb)

Similar Messages

K7n2g-ilsr Problems Still Stay:)))

Dear MSI time!Try to install Motherboard MSI K7N2G-ILSR BIOS 1.8 END
TV TUNER MSI TV@NYWHERE MASTER ,OPERATION SYSTEM WIN XP SP1 CPU BARTON
2600+ MEM DDR333 512MB WITH LAST DRIVERS FROM MSI WEB PAGE:)))
WHEN PC TURNOFF BLUE SCREEN:)SOUND FROM TUNER WORK 5 MIN END GO OFF:)
IN BULGARIA TV SYSTEM IS NOT SEKAM:)))
wHEN DRIVER MSI8606 AUDIO CAPTURE DISABLE BLUE SCREEN NOT.
TRY USE DIGITAL CAMERA FROM MUSTEK GSMART LCD2 PROBLEM COPY PIC FROM CAM
ERA TO PC:)))CAMERA WORK PERFEKT WITH OTHER PC..S ,I TRY WITH 5 OTHER..
I TRY OTHER MTHERBOARD MSI K7N2G-ILSR PROBLEMS STILL STAY:)))
I WORK WITH PC..S 10 YEARS END SUCH unseen, compatible SYSTEM FROM MSI...
Congratulate s. o. on his success!!!!

Quote
Originally posted by BG-User
i have 8 pc...s:)))but this MSI System is "N1":))
I do not need help MSI needs help:)))
Hi BG-USER,
Since your not looking for help I guess you are posting on here to complain to MSI. None of the people in this Forum are MSI employees so they won't get your message. Complaints are made by contacting MSI directly. You can call them or e-mail them.
Cheers

MSI K7N2G-ILSR Problem! Need help!

Hi,i bought a K7N2G-ILSR last year when i was in Germany. This mainboard never worked as well... I wanted to work with Athlon XP 2500+ and Dual Channel 256MB+256MB=512MB 400 Mhz DDR-Ram. It hasn't worked when i first wanted to use and i changed the jumper to the securit mode than it worked but it has never opened with one button pushing.I was always trying to get screen vision with 3-5 closing and opening.One day i tried to get the jumper back and i tried to open but it never worked. I got the jumper securit again but again never worked. I tried everything but it never worked after that event. Normally i had to inform it at first and give it back or give it to the repairing but i couldn't have time. Now i have to do it this time. Now i want to change this or something else but in Turkey. I am living in Turkey and does MSI Support Centre change it or repair it? What can i do to get rid of this problem. Need help!
Thanks for your helps from now!

MSI K7N2G-ILSR Mainboard 11X166
AMD Athlon XP 2500+
2X256 MB PC 3200 Twinmos
OnBoard Graphic Card
Samsung 40 GB 5400rpm HDD
300 Watt Power Supply
I dont have more infos but i can find out if you want...

K7N2G - ILSR problems ...

Right, this is a long story!
I got my K7N2G a few months ago now, started by using PC2100 (Generic, lol) ... it worked quite well - I can't remember getting crashes!
I then upgraded to 2x256Mb PC3200 TwinMOS, not knowing about this whole picky RAM thing - I'd heard it was good RAM so I got me some ... after replacing one because of a bad stick I had both sticks running well, I then started getting lotsa freezing in games (esp. UT2003) and I thought it was just overheating but after doing some overall quietening (Zalman GPU, new CPU cooler), it was still crashing ... then the fan on my chipset died so I stuck a new 40mm fan ontop and seemed allright but was still getting the odd freeze in-game! Eventually was told that the 40mm fan wasn't actually needed so I removed it and things didn't get any worse ...
Untill now, I get crashing in game very often and I have lost my USB ports)!
Is any of this todo with my RAM, or chipset fan removal?
Also this is an engineering release ... is it safe to update it with the latest K7N2G-ILSR BIOS?
I had less problems with my ECS K7S5A, lol!
Thanks for reading and hope you can help ... Alex

Quote
Originally posted by UnrealRocks
Well, thats put a stop to that system ...
Switched it on this morning and BOOM - one hell of a bang and flash ... PSU dead and rest of the system taken with it!
Grrrrr!
Sorry to hear that your dead in the water. :( Since your going to buy a new PSU "DO NOT BUY A QTEC" Stick with an Antec or Enermax 400W+, you may pay a little extra but this is one of the most important components of you system so it's worth it. It will help eliminate a lot of problems in the future.
Rob

Help Needed in resolving problems with Hyperion Planning Web Forms

Hi,Can anyone help me with this problem?Problem:We are running Planning 2.3.1 I have created Webform & security(application owner has the ownership).Somehow Iam getting only 7 dimensions into webform & 1 dimension is missing in that. But whereas 8 dimensions are there in Essbase.Hsp_Rates dimension is available in essbase outline but Iam unable to see that dimension in the webform selection.And using the webform Iam unable to load any data ...the form is graded/protected.Is this happening because i dont have the requirement of 1 member from each Dimension?Please someone let me know why this is happening what might be the reason.ThanksUser

Hi,The dimension Hsp_Rates is a hide dimension used by Planning to store the exchange rates for the differentes exchanges.All the standard information is stored on HSP_InputValue member (in this dimension).When you create a web form, Planning automatically asign this member (but don't show it).Probably you can't load data because you are selected on Version dimension a Standard Botton Up version, and you only can load data on level 0 members in this type of version.If you want to load data on upper level members, then you need to create a Standard Target version (in the Version dimension) and select it in the form.Please, advice if this solve your problemClaudioBPD Solutions

Help needed with 848p problem

hi allll
i have buyed new MSI 848p Neo and i have the following hardware
CPU: 2 GHZ 533 P4
Memery : 256 DDR 2700
GC: MSI 848 p
HD: WD 10 GB
when i connacted everting only the processer fan was working the hard drive and the CD doesnot work (POST)
if i unplage the Hard drive and the CD it will work (POST)
the problem is the Pc doesnot Post only the processer fan and i have blank screen ?
help needed
thanks

Try this.
Put your optical drives like CD-ROM drive to IDE 1 and set as Primary Master aka Master mode and put your HDD to IDE 2 and set as Secondary Master aka Master mode also.
Btw, what is your PSU specs?

Help needed with Layout problem

Hello everybody
I need to insert components such as buttons in a JPanel using absolute positioning
I still cant dot this
even if I used the method setLocation for the component
I wanna know if I have to change the default layout for JPanel or whatever
thanks a lot

i found this quite useful:
http://java.sun.com/docs/books/tutorial/uiswing/layout/visual.html#border
dont know if it will specifically help with your absolute positioning problem.

Urgent help need on swing problem

Dear friends,
I met a problem and need urgent help from guru here, I am Swing newbie,
I have following code and hope to draw lines between any two components at RUN-TIME, not at design time
Please throw some skeleton code, Thanks so much!!
code:
package com.swing.test;
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import javax.swing.*;
import javax.swing.event.*;
public class LongguConnectLineCommponent
    public static void main(String[] args)
        JFrame f = new JFrame("Connecting Lines");
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.getContentPane().add(new ConnectionPanel());
        f.setSize(400,300);
        f.setLocation(200,200);
        f.setVisible(true);
class ConnectionPanel extends JPanel
    JLabel label1, label2, label3, label4;
    JLabel[] labels;
    JLabel selectedLabel;
    int cx, cy;
    public ConnectionPanel()
        setLayout(null);
        addLabels();
        label1.setBounds( 25, 50, 125, 25);
        label2.setBounds(225, 50, 125, 25);
        label3.setBounds( 25, 175, 125, 25);
        label4.setBounds(225, 175, 125, 25);
        determineCenterOfComponents();
        ComponentMover mover = new ComponentMover();
        addMouseListener(mover);
        addMouseMotionListener(mover);
    public void paintComponent(Graphics g)
        super.paintComponent(g);
        Graphics2D g2 = (Graphics2D)g;
        g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
                            RenderingHints.VALUE_ANTIALIAS_ON);
        Point[] p;
        for(int i = 0; i < labels.length; i++)
            for(int j = i + 1; j < labels.length; j++)
                p = getEndPoints(labels, labels[j]);
//g2.draw(new Line2D.Double(p[0], p[1]));
private Point[] getEndPoints(Component c1, Component c2)
Point
p1 = new Point(),
p2 = new Point();
Rectangle
r1 = c1.getBounds(),
r2 = c2.getBounds();
int direction = r1.outcode(r2.x, r2.y);
switch(direction) // r2 located < direction > of r1
case (Rectangle.OUT_LEFT): // West
p1.x = r1.x;
p1.y = r1.y;
p2.x = r2.x + r2.width;
p2.y = r2.y;
if(r1.y > cy)
p1.y = r1.y + r1.height;
p2.y = r2.y + r2.height;
break;
case (Rectangle.OUT_TOP): // North
p1.x = r1.x;
p1.y = r1.y;
p2.x = r2.x;
p2.y = r2.y + r2.height;
if(r1.x > cx && r2.x > cx)
p1.x = r1.x + r1.width;
p2.x = r2.x + r2.width;
break;
case (Rectangle.OUT_LEFT + Rectangle.OUT_TOP): // NW
p1.x = r1.x;
p1.y = r1.y;
p2.x = r2.x + r2.width;
p2.y = r2.y;
if(r1.y > r2.y + r2.height)
p2.y = r2.y + r2.height;
break;
case (Rectangle.OUT_RIGHT): // East
p1.x = r1.x + r1.width;
p1.y = r1.y;
p2.x = r2.x;
p2.y = r2.y;
if(r1.y > cy)
p1.y = r1.y + r1.height;
p2.y = r2.y + r2.height;
break;
case (Rectangle.OUT_TOP + Rectangle.OUT_RIGHT): // NE
p1.x = r1.x + r1.width;
p1.y = r1.y;
p2.x = r2.x;
p2.y = r2.y;
if(r1.y > cy)
p1.y = r1.y + r1.height;
p2.y = r2.y + r2.height;
if(r1.y > r2.y + r2.height)
p1.y = r1.y;
else
if(r1.y > r2.y + r2.height)
p2.y = r2.y + r2.height;
break;
case (Rectangle.OUT_BOTTOM): // South
p1.x = r1.x;
p1.y = r1.y + r1.height;
p2.x = r2.x;
p2.y = r2.y;
if(r1.x > cx && r2.x > cx)
p1.x = r1.x + r1.width;
p2.x = r2.x + r2.width;
break;
case (Rectangle.OUT_RIGHT + Rectangle.OUT_BOTTOM): // SE
p1.x = r1.x + r1.width;
p1.y = r1.y + r1.height;
p2.x = r2.x;
p2.y = r2.y;
break;
case (Rectangle.OUT_BOTTOM + Rectangle.OUT_LEFT): // SW
p1.x = r1.x;
p1.y = r1.y + r1.height;
p2.x = r2.x;
p2.y = r2.y;
if(r1.x > r2.x + r2.width)
p2.x = r2.x + r2.width;
if(r1.x > cx && r2.x > cx)
p1.x = r1.x + r1.width;
p2.x = r2.x + r2.width;
return new Point[] {p1, p2};
private void determineCenterOfComponents()
int
xMin = Integer.MAX_VALUE,
yMin = Integer.MAX_VALUE,
xMax = 0,
yMax = 0;
for(int i = 0; i < labels.length; i++)
Rectangle r = labels[i].getBounds();
if(r.x < xMin)
xMin = r.x;
if(r.y < yMin)
yMin = r.y;
if(r.x + r.width > xMax)
xMax = r.x + r.width;
if(r.y + r.height > yMax)
yMax = r.y + r.height;
cx = xMin + (xMax - xMin)/2;
cy = yMin + (yMax - yMin)/2;
private class ComponentMover extends MouseInputAdapter
Point offsetP = new Point();
boolean dragging;
public void mousePressed(MouseEvent e)
Point p = e.getPoint();
for(int i = 0; i < labels.length; i++)
Rectangle r = labels[i].getBounds();
if(r.contains(p))
selectedLabel = labels[i];
offsetP.x = p.x - r.x;
offsetP.y = p.y - r.y;
dragging = true;
break;
public void mouseReleased(MouseEvent e)
dragging = false;
public void mouseDragged(MouseEvent e)
if(dragging)
Rectangle r = selectedLabel.getBounds();
r.x = e.getX() - offsetP.x;
r.y = e.getY() - offsetP.y;
selectedLabel.setBounds(r.x, r.y, r.width, r.height);
determineCenterOfComponents();
repaint();
private void addLabels()
label1 = new JLabel("Label 1");
label2 = new JLabel("Label 2");
label3 = new JLabel("Label 3");
label4 = new JLabel("Label 4");
labels = new JLabel[] {
label1, label2, label3, label4
for(int i = 0; i < labels.length; i++)
labels[i].setHorizontalAlignment(SwingConstants.CENTER);
labels[i].setBorder(BorderFactory.createEtchedBorder());
add(labels[i]);

If you need some help, be respectful of the forum rules and people will help. By using "urgent" in the title and bumping your message every 2 hours you're just asking to be ignored (which is what you ended up with).

Help needed. Having problems loggin in to my computer

Hi,
I recently upgraded to Mac os X 10.5, and since then I have been having all kinds of problems loggin in to my computer. It is not recognizing my password. I reset the Admin password using the install dvd disc, but that still didn't help. I loggin but I don't have access to any of my files or documents. Could someone please help.
Thanks in advance.

you really need to decide if you are going to reinstall or try to fix your current system. I just posted a long answer to your other thread.
is your current account listed as admin in system preferences?
and what happens if you try to log into your old account?
Message was edited by: V.K.

Helped needed. PPPoE problem

In trying to secure my wireless connection, I changed a lot of the router's default settings. Somewhere along the line, I have lost the ability to get to the internet on the Linksys. Here are the sys details.
WIN XP
Westell 2100 broadband modem
Linksys WRT54G
I usually have everything set so that the Westell is in Bridged mode. The problem was nothing was secure.
Here is what is on the Linksys.
PPPoE,
User Name: It is correct.
                        Password:    It is correct.
                        Service Name:
                        Connecton Demand : Max Idle Time  5 Min.
                        KeepAlive : Redial Period    Sec.       180
            Optional Settings
(required by some ISPs)
                        Router Name:
                                    Host Name:
                        Domain Name:
                        MTU:
                        Size:
Network Setup
Router IP                                Local IP Address:        .   .  .
                        Subnet Mask:
Network Address
Server Settings (DHCP)                                  DHCP Server:             Enable Disable
                        Starting IP Address:    192.168.1.
                        Maximum Number of DHCP Users:
                        Client Lease Time:         minutes (0 means oneday)
                        Static DNS 1:   .  .   .
                        Static DNS 2:   .  .   .
                        Static DNS 3:   .  .   .
                        WINS:              .  .   .
IP address: 192.168.1.101
Mask is correct
Gateway:   192.168.1.1
There are no ACCESS Restrictions, no MAC Filters, Wireless Security is currently DISABLED. I have pushed the reset button on the Linksys (and the Westell, too) trying to fix things and nothng changed.
Here is what is on the desktop.
Dhcp enabled: Yes
Autoconfiguration enabled: Yes
IP address: 192.168.1.101
Subset Mask: 255.255.255.0
Default Gateway: 192.168.1.1
Dhcp Server: 192.168.1.1
DNS servers: 192.168.1.1
I have done power cycles to no avail.
Any help will be appreciated.

Since you have Resetted your Modem and Router. Connect the Modem to Computer and check if you are able to go online or not. If yes, then on your computer open the Command Prompt window and type "ipconfig" and hit enter and post the details output in your next post.
If the IP address of your Modem is in the range of your Router, then your modem is Unbridge so you need to Bridge your Modem again.

Help needed with connection problem before I chew off my foot.

I am on 24/7 with Virgin.
From last Friday, my connection telephone number has been constantly engaged.
BT tell me it is not a valid number (?).
I can access the internet just by changing the number in remote access to the one I'm using now - a pay by the minute number.
This leads me to believe thay my settings are correct - as they have been for a considerable time.
Virgin have responded once with a standard reply confirming the telephone number (useless) to four e-mails. There is an unconnected (no pun intended) 'server' problem with their 'online help'.
I am on Netscape or IE, external Zoom modem and I haven't done anything which might alter my settings.
Any help would be much appreciated - even sympathy might make me feel better!
Please bear in mind that I am a techno-idiot with any advice offered.
Thanks in advance.

I get a perpetual 'engaged' tone with a mechanical woman telling me that the number is busy, please try later.
The 'helpline' is a premium number. Cleverly, I have had premium numbers blocked on my 'phone line to defeat the fraudsters re-directing calls.
This means that I have to use someone else's 'phone to call a premium number!
Since last Friday, I have sent a total of six e-mails to Virgin and received one 'standard' reply which was of no help.
I agree that it seems like an ISP problem.
However, perhaps someone could kindly talk me through the things I ought to be checking on my computer (in words of one syllable where possible!).
Thankyou in anticipation.

Help needed with permissions problem in new Aperture 3.5.1

Hello and thank you for helping me with my first question to this wonderful support center. I have been using Aperture for many years. I recently upgraded my Mac to Mavericks, now running 10.9.2. and then upgraded (by necessity) to Aperture 3.5.1. I am working on a big project for a client and have an assistant in another city. I live outside the US so mailed my library to my asst. on an external drive. She updated to 10.9.2 or .3 and Aperture 3.5.1. No problems. She modified the library and sent the library to the client in another city in the US on an external drive who has also upgraded to Mavericks and is running Aperture 3.5.1. So we are all in Mavericks with recent Apertures. When client tried to open the sent library client got a message that stated:
"Aperture cannot access this library. To use this library, make sure its file permissions are set correctly.”
Clientʻs Tech assistant at her office is a PC specialist but apparently did try on Friday and did try to repair permissions but I am told that it did not work. I wish I had more specific info on what Tech assistant did but I do not at this time.
On Monday I would like to give them very specific instructions about what to do to open the library
For recent discussions I have found only this
https://discussions.apple.com/message/23600132#23600132
Oct 30, 2013 3:35 PM by Frank Caggiano
about repairing permissions.
I am sure that we are all running Mavericks and new Aperture, that does not seem to be at the root of the immediate problem. As we are in two different countries and three different cities and communication is hard, please tell me if this is a common problem with an easy fix and if it should be fixed by Repairing Permissions, please tell me exactly what I should tell them to do on Monday. They can at least see this discussion from their city!
Many thanks!! This is an urgent project so I very much appreciate your help.

Have your collegues check the file system of the drive and the "Ignore Ownership on this volume" flag.
To check the filesystem and "Ignore ownership" flag select the drive in the Finder and use the command "File > Get Info ⌘i"
In the panel unlock the padlock in the "Sharing & Permissions" brick and set the "Ignore ownership" flag at the bottom of the panel.
Also, check the "General" brick of the panel. The format should be showing as "Mac OS Extended (Journaled)". Aperture checks for the correct formating before opening a library and may refuse to open a library on a drive formatted for Windows.
If the format is wrong, it would be best to move the library to a different drive with the correct formatting.
Once the "Ignore ownership" flag is set, try again to repair the permissions and see, ifyou now can open the library.

Help needed in logic problem

HI,
I am trying to implement one marketing application, where the goods will be dispatched via some transportation. The receipt name is lr number or lrno. Some times for same lr no., 2-3 goods will be dispatched. Now, I am developing one application, if an user selects the from and to date from the web page, the web page should display all the lrno. Form date to to-date, its destination place and total amount, etc. These values are coming from backend.
Eg.
Trname      Lrno           dt          amt
BLR     LR300          1/2/05          1000
MUM     LR400          1/2/05          2000
MUM     LR400          1/2/05          100
MUM     LR400          1/2/05          200
DL     LR600          3/2/05          1000
My problem is if there are 2-3 goods for same lrno, the amounts should add up and final amount should come. Only in one record.(in one row). In the above example, for MUM 3 rows are there. So, the trname, lrno, dt shuld be same , but the total amount of all the three records should be added up and display.
Expected output
BLR     LR300          1/2/05          1000 as it is displayed
MUM     LR400          1/2/05          2300// it should display like this.
DL     LR600          3/2/05          1000 // as it displayed.
My output as follows: I cold add the amount, but, each time, the record is displayed. Like this
BLR     LR300          1/2/05          1000 //correct output
MUM     LR400          1/2/05          2000 //this should not display
MUM     LR400          1/2/05          2100 // this should not display
MUM     LR400          1/2/05          2300 //Only this record should be displayed.
DL     LR600          3/2/05          1000 //correct output
Code sample as follows:
<%
while(rs.next())
          trfamt=rs.getInt("cfrta");
          String carnam=rs.getString("ccara").trim();
          String lrdt=rs.getString("clrd").trim();
          String lrnum=rs.getString("clrn").trim();
          brk="y";
          cnt1=0;
          cnt=cnt+1;
          out.println("Counter="+cnt);
          if(cnt==1)
               subtot=trfamt;
               tmp=lrnum;
          }//end of if(cnt==1) cndition
          else
               if(lrnum.equals(tmp)) //compares whether two lrno are same or not.
                    brk="n";
                    subtot=subtot+trfamt; // if lrno are same, its amount is added up
                    //carnam1=carnam;
                    //lrnum1=lrnum;
                    System.out.println(lrnum+""+tmp+" "+"Lr numbers are same.totaling is continued");
                    tmp=lrnum;
                    cnt1=cnt1+1;
                    }//end of if
               else
                    if(cnt1==0)
                         subtot=0; // if lrno are different, fresh totaling is done
                         subtot=trfamt;
                         System.out.println("Lr numbers are different.Fresh Totaling is done");
                         tmp=lrnum;
                         }//end of if(cnt1=0)condition
               }//end of else
               }//end of if(cnt==1)condition else part
     if((cnt==1)||(brk.equals("y"))||(cnt1>0))
                    {%>
                    <TABLE>
                    <TR>
                         <TD><%out.println("Carier Name="+carnam);%></TD>
                         <TD><%out.println("Lrnumber="+lrnum);%></TD>
                         <TD><%out.println("Amount="+subtot);%></TD>
                    </TR>
                    </TABLE>
                    <%}
     }//end of while condition %>
How to correct this error ! please help me.
With regards,
AShvini

Thank you Ram.
I will try your code. ok, i took another look at it and dont see y it shouldnt
                        if(lrnum == mc.getLrNum())
              //if this has already been added, just update amount
              mc.addAmount(trfamt);
              dupRecord = true;
                                           break; //it would work correctly even without this, but y do unnecessary iterations if id found
,/code]
Since past 3 days, i am struggling with this bug. SO,
i asked for line by line compilation. As u said, i
tried to download IDE from www.ecllips.com, but,
stuckup somewhere. so, i gave up.
don't give up, install eclipse (or any other ide), it would do wonders to ur development effort.
I will try with your code and get back to u.
   cool :-)
ram.

More help needed on m2v problems!

I have also been having problems when I try to import compressed (using Compressor) video files in SP 4. I have repaired file permissions and shortened the name of the file (as recommended in previous posts), but every time I try to import the file into SP, it closes the program and gives me an error report. When I try to open the file by itself, if opens Droplet. When I hit "submit," it freezes the program. Also, other compressed video files (that I have burned DVD's with in the recent past) don't work. They all do the same thing. It was all working fine last week (about two months after I upgraded Production Suite), and all of a sudden it's making me loose hair.
Another thing I should mention: I have very little space left (1.89 GB) on my internal hard drive. This filled up very quickly, and I'm not quite sure how. When I started my computer yesterday, I had 5.5 GB. Before that, I had even more, though I'm hazy on the details. Anyway, I would GREATLY appreciate any help that's out there! Thanks!

One thing (which may or may not help) is clearing off you hard drive, 1.89 Gigs on 80 Gigs will lead to the computer slowing down considerably, anything over 80% seems to be the number of more problems creeping up, and you should clear out as much as possible. With temp files, virtual memoory etc, it causes issues

Help Needed , N93I Camera problem after Update

Hi All
After updating my N93I the camera can't take pics and only take Black photos , You don't see nothing on the screen ( Only stripes)
The Phone is O.k since it worked for 1 time even after the upgrade and that's all.
I can use the internal camera.
Please Help .

same problem here ( still waiting maybe someone knows the solution (

Help needed - K7N2G-ILSR problem

Similar Messages

Maybe you are looking for