Help Needed , N93I Camera problem after Update

Hi All
After updating my N93I the camera can't take pics and only take Black photos , You don't see nothing on the screen ( Only stripes)
The Phone is O.k since it worked for 1 time even after the upgrade and that's all.
I can use the internal camera.
Please Help .

same problem here ( still waiting maybe someone knows the solution (

Similar Messages

Iphone 5 back camera problem after update to IOS 8. Focus doesn't work on back camera!

My device is Iphone 5 64gb IOS 8.
I have problem after update to IOS 8. When i run camera.. I hear some scratch inside my phone. And focus of back camera doesn't work.
1. How can i fix it?
2. Or how to rollback to IOS 7+ ?
3. Should i come to app store with this problem?

I'm having this same problem too. Worked fine prior to iOS update. I contacted Verizon this morning who advised that this is a known issue. They suggested I backup my device, and perform a factory data reset. When prompted to update to iOS 8 again, re-installation has been known to resolve the issue. With all the problems with iOS 8, camera, and overall device slowing, I might just wait for a follow on SW turn.

Camera Problems after Update - NOKIA SUPPORT PLEAS...

Hi There
I am reading over the net that some users lost the ability to use the camera after Update of firmware.
I am one of those that have a N93I (Which supposed to have a great camera) that can't use the camera any more , When I try to use the camera I get stripes on the screen and the pictures are all black.
I am reading about the same issues with other users and other phones.
I have tried to update the software several times and it remains the same.
What are my options , I got the phone as a gift from other state and I don't have a place that can help me here in Israel , I guess I need to re flash the phone but no support center in Israel that can do this since this phone is not “official” supported in Israel ... What can I do.
I must say that I am disappointed from Nokia phones; I have bought two in the last months:
Nokia N93I : I cannot use the camera after using the NOKIA software update.
Nokia N95 that the screen turn to black, the phone is working but nothing on the screen ,At least this can be fixed by Nokia partner in Israel since the phone is also being sell in Israel.
I am a big fan of Nokia, I used a many phones and the main issue is that those are the best phones and I feel like **bleep** with those.
Please help me and advise me what I can do with my N93I.
Thanks in advance.

I AM VERRY SORRY TO BE THE ONE WHO TELLS U THIS but, unfortunatley the black photos and strips are not caused by the update (( it is a HARDWARE problen nothing to do with software. i had the same problem and i went to a service with it, they reinstalled the soft but still didnt work, then when they checked the camera inside the prob was truly this thing: camera itself
srry man anyway try to get an opinion of ur self from some services i may be wrong
(that war the problem in my case with black/blue photos and stripes)

Camera problems after updating 8100 Firmware to v4.5

Hi All
This is a known issue to me as I update all our work handsets with Blackberry firmware for the company I work for.
After updating the firmware on several handsets to the latest 4.5 version of the Blackberry 8100 there is a problem with the camera.
When you are in view mode and outside (even whilst overcast) the screen goes white as if the aperture for the lens is open wide.
Even when you take the picture the result is whiteness everywhere.
Please see examples here:
http://www.imagedump.com/index.cgi?pick=get&tp=540100
and
http://www.imagedump.com/index.cgi?pick=get&tp=540101
Both of these pictures were taken indoors with just flourescent lights on.
However if I return the firmware to a lower level the problem no longer exists.
I have tried changing the white Balance settings on the handset and no matter which setting I put it on the same results occure.
I was wondering if there is a patch or do I have to wait for the next version for a bug fix?
Thanks for your help in advance.
Gadget
Solved!
Go to Solution.

Upgraded the handset software to 4.5.0.55 and the camera problem no longer exists.
Can I get Kudos for solving the problem myself?? LOL
Gadget

Camera problems after update to 8.1

After updating to IOS 8.1 on my iPhone 5, my camera died. I tried to recreate the phone, but I am sure that the problem is the Software update, and as long as I can't go back to an early version I can't fix it. What do i do? I had no problems with the 8.01 like everybody else.
The camera is like frozen... sometimes i can switch and get the front camera ( the one that is on the same side as the screen ) to work but the main camera is dead.

Hello there MikeeSimonsen,
It sounds like your camera is not working at all on one side, and very inconsistently on the other side. Start with these steps in the following article:
Get help with the camera on your iPhone, iPad, or iPod touch
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
If the issue persists, before you reach out to Apple per step 4, I would next backup your phone and restore it as a new device, rather than restoring it from a backup with this article:
iOS: How to back up your data and set up your device as a new device
Restoring an iPhone as a new device with iTunes will determine if the issue is to do with software or not. If the issue does not persist when it is restored as new, then restore your backup and verify it still works, or isolate the issue to the backup itself.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Camera problems after update

So after the latest update my phone keeps saying camera unavailable, this was very frustrating when I went on holiday as I kept having to close and reopen the camera app to take pictures!! I bought the phone partly because of the camera. It's still not fixed and it affects other apps like snapchat and Instagram.

Download SUS and repair:
http://www.sonymobile.com/gb/tools/update-service/
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

HT4623 I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

I am facing the same issue! I bought 5c few days back
and everything was fine till I updated the software 7.0.4!
Whenever am connected to wifi am unable to make a call and if someone tries
Calling me they get the message that my number is not
Reachable! When I go back to 3G the calls work perfectly!!
Please help me out since I use wifi more than my network.
Appreciate any advise on this

My iphone 4s wifi and bluetooth problem after updating ios 8? please help me...

my iphone 4s wifi and bluetooth problem after updating ios 8? please help me...

Hey there Abdulrahim0259,
I would recommend that you use the following 2 article to help troubleshoot the Wi-Fi and bluetooth issues you are seeing, respectively:
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
And:
iOS: Troubleshooting Bluetooth connections - Apple Support
Thank you for using Apple Support Communities.
All the very best,
Sterling

My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

Force close the App Store app and reset the iPad. No data will be lost when you reset the device.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

How do i retrieve lost pictures, ie camera roll- after updating my ipad to IOS8.3

how do i retrieve lost pictures, ie camera roll- after updating my ipad to IOS8.3

Hi dreamafrombartow,
I hope you are able to get your pictures back. Do you have a backup anywhere else?
I did find a couple articles that may help with your recovery.
If you need help restoring an iCloud backup
http://support.apple.com/kb/TS4036
iCloud: Troubleshooting missing information after restoring an iOS device
http://support.apple.com/kb/TS4605
Best regards,
Nubz

Problems after updating from Mavericks to Yosemite.

Hello everyone.I have noticed some battery problems after updating from Mavericks to Yosemite like no charging at all (but the orange led was on )and not able to fully charged.I solve them with SMC reset and PRAM reset.Furthermore, battery discharges faster than before and its really annoying.Now I have notice that the upper right corner of my mac is getting hot.I'll appreciate any help
MacBook Pro (Retina, 13-inch, Late 2013

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Light Flow / Accessibility Problems After Update ..

OK Light Flow problem after update.... the problem is my Talk Back in Accessibility keeps turning on after i restart my phone i know it should not do that it only dose it when i have Light Flow - LED & Notification installed and Tturned on in Accessibility ..... i use Light Flow - LED & Notification to control my LED Notification becuse i hate the built in feature that came with the phone the default management keep the LED to dim hard to see ........ i have used the app ever scene i got the phone and never had a problem tell this crappy update JZO54K.I535VRBLMD3 / I535VRBLMD3 came out i also believe the update JZO54K.I535VRBLMD3 / I535VRBLMD3 that was pushed out made the Accessibility option bad / and everything else
The phone is new
i have hard factory reset it / battery pulled
it did it with old phone but did not do it before that update was pushed
i also got a (NEW) NOT REFURBED phone trying to solve the poor 4G LTE signal /battery life
and over all phone performance with no luck that update was a bad one and needs to be addressed
PLEASE FIX THE PROBLEM >>>>> VERIZON SAMSUNG GOOGLE ( PLEASE )

yep, I had that same problem too, but found a work around. First I tried disabling the accessibility options (but that was no good, I like the light flow notifications). I read from the app (see bottom of opening screen):
I found the work around to be just getting a folder app from the play store - the only talking it was doing was "opening folder" "closing folder" (annoying as he!!)
See the second screen for what that says as far as options. My opinion - just get the folder app, it's easier.

Problem after update software 5700xm

I'm facing some problem after updating my 5700xm from v3.27 to v 03.83.1 22-06-07.
1. when opening the music player when the open progress is appear it came out so long untill i have to switch it off and on it again then when i open the music player it goes OK.
2. Refreshing music library, when i try to update/refresh to find new music after recived bluetooth it takes to long to find like 1hr and at the end i have to stop it. Also no new music found i'v done it many times.
3. After all the problem came out, i thought that maybe it will solve if i just try restore the phone to default factory setting, so i back up phone memory to mmc and then press *£7370£, so it restart and appear installing it took long time to install and at the end came out masage "some application are unable to install....." then i try to restore the phone memory, but it like the restore can't function well or maybe don't restore at all b'cos all my application that I install erlyer not fuction, all my contac are lost so do massege....
So do any body got the same prob as i am...????
Can I down grade to the erlyer version????
Any body please help give some oppinion to solve this prob so that i can sleep well....

Hello EveryBody
To update your Nokia 2700, DON'T USE "nokia software update" directly.
You'll have to install NOKIA OVI SUITE, then sign in with your account ou register.
Afterwards update your 2700 via the update option of OVI SUITE.
I just tested it and it works

Skype problem after update problem in the phone language

Skype problem after update problem in the phone language
after update to the Windows version the previous month after Skype version update I get this message that came in and tried in every way and the same message so I thought it's a problem in version bskaib and I wait for the update for acne is a problem particular
to discovered that Skype wouldn't even be open on your browser-and I want to know if there is a way to make to download languages because the language of the United states are available for the device does not support language harbored her mean in the sense
that I If you want the device English picked united kingdom and the United States version of does not support hardware keyboard language only!

The Windows Store Development forums are for developers to discuss writing their own Windows Phone apps. For help with using Windows Phone please ask in the Windows Phone forums on
http://answers.microsoft.com .
--Rob

Photoshop CS2 problems after updating to 10.4.5.?

Anybody notice Photoshop CS problems after updating to 10.4.5.?

Hello I had the same problem
I found the following information that helped me.....
Program errors occur when software conflicts arise due to an updated operating system. You can resolve these errors when you also update the driver software that causes the conflict or when you update the operating system. Program errors can also occur because of a damaged Photoshop preference file, or if there is a problem with a phone or internet connection. The Apple Disk Utility fixes file system errors that can also cause program errors.
Error "Could not complete your request..." or "Could not create a new document..." (Photoshop CS2 on Mac OS X v10.4)
Issue
Adobe Photoshop CS2 returns one of the following error messages:
"Could not complete your request because of a program error" when you try to open a file.
"Could not create a new document because of a program error" when you try to create a new file.
Solution 1:
Install the most recent update to Mac OS.
Solution 2:
Re-create your preferences files.
1. Hold CommandOptionShift when you start Photoshop.
2. Click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Solution 3:
Disconnect your Internet connection.
To disconnect your Internet connection, do one of the following:
If you are connected to the Internet via a telephone modem, then disconnect from the modem.
If you are connected to the Internet via cable modem or DSL, then disconnect the ethernet cable from your computer.
Solution 4:
Use a disk repair utility.
Restart your Mac in Single User mode and run fsck -fy . For more information about the fsck command, please visit the Apple website at http:/docs.info.apple.comarticle.html?artnum=106214 .
Solution 5:
Ensure that all your drivers are compatible with Mac OS X v10.4.
Determine if your printer and video card (and any other peripherals you might have) are compatible with Mac OS X v10.4, and visit the manufacturers' websites to update the drivers.
Solution 6:
Re-create your printers in Mac OS X.
To re-create your printers, first delete them and then add them again.
To delete your printers:
1. Open System Preferences from the Apple menu.
2. Select Print & Fax, and click Printing.
3. Select each printer in the list and click the delete key (the minus key).
For instructions on how to add your printers again, see "Setting up to print to a printer" in Mac Help or search Help using the phrase "add a printer."
The one that fixed it for me was solution 6 -- re-creating my printers
I don't know why but it could be worth a try
Good luck
ADAM
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook + G3 iMac Mac OS X (10.4.5)

Help Needed , N93I Camera problem after Update

Similar Messages

Maybe you are looking for