Help needed on "Archiving in R/3 and its impact"

Hi All,
I will be pleased if Any one who can guide me or send me a document on "Archiving in R/3 and its impact"
Thanks in advance.

i don't remember such a document ...
some extractors like lo cockpit 11 and 13 can extract data from archive, but most of the extractors can't.
the workaround is, to reload the data from archive in a new r3 table and build an generic extractor on it. then you can load the data to bw. after that you can refresh the table.
i also heard of direct loading from archive, but i never tried.

Similar Messages

Help on Business Function "Reporting Financials 2" and its impact

Hi All,
I am looking at 'SAP Help' for Reporting Financials 2 (EhP4).
http://help.sap.com/erp2005_ehp_04/helpdata/EN/6a/cd7dbd74694af3ac13b3c24a10def4/frameset.htm
basically I want to use the standard extractor 0FI_AA_20 FI-AA: Transactions and Depreciation . when i try to run the extractor i get an error saying: Business Function "Reporting Financials 2" is not switched on
In order to use the new data sources the pre requisites are:
1. SAP Enhancement Package 4 for SAP ERP 6.0
2. Activated the Reporting Financials 2 business function.
The EnP4 is already implemented what i have do next is to activate the business function.
Can any one help me with more details on what all gets activated with this business function 'Reporting Financials 2' and its impact.
With Best Regards
Shilpa.

Hi,
in SFW5 you can get an overview over the business functions. There you could activate the appropriate Business Function.
But I would recommend you strongly before to read some information and documentation about business functions and the enhancement package concept.
Regards,
Markus

Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

Thanks for prompt reply, yes we have tried that but have now closed down the browser we where the photos were.
We haven't sent up time machine, do you know whether there is any roll-back function on a Mac?
Thanks

URGENT HELP NEEDED ... Tomcat Realm and JRE1.4 plug-in problem

I have tried the Security Realm of Tomcat. Since I do not have
an LDAP server, I decided to use the Tomcat-users.xml file in
Tomcat\conf directory.
I added the following lines of code in the web.xml file.
<security-constraint>
<web-resource-collection>
<web-resource-name>Entire Application</web-resource-name>
<url-pattern>/*</url-pattern>
</web-resource-collection>
<auth-constraint>

<role-name>webviewer</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>Tomcat Manager Application</realm-name>
</login-config>
The <role-name> "webviewer" is added into "Tomcat-Users.xml" as the following:
<tomcat-users>
<user name="test" password="password" roles="webviewer" />
</tomcat-users>
So, now when we type the url: http://localhost:8080/adbpdbre/default.htm, TOMCAT shows a dialog box asking for UserName: and Password:Now, only when we give the username and password, it shows the page. This is exactly what we want.
But the problem now is, this default.htm page, has 5 links to 5 applets. The first time that I click on one of these links, the JRE plug of 1.4 shows a dialog again asking for the username and password. Till I dont provide the username and password the system doesnt go ahead and applet doesnt load. I do not want the JRE to ask me for the username/passwords again..How to avoid this ?
Can you give me some more information on this. Ultimately in the production usage, we will be using LDAP and not Tomcat's memory realm.
URGENT HELP NEEDED ... I need to get back to my client on this.
Help would be v. much appreciated.

In the config file, you 're essentially saying that you want Tomcat to prompt for usr/passw on every request (url-pattern = /*) made by a 'webviewer', and that's exactly what Tomcat is doing.
Consider using specific url-patterns & roles for resources to be protected. If for now, all you need is to protect the first page, use a more specific url-pattern.
Just an advice : if you'll be using LDAP in production, do not waste time with Tomcat's Security Realm and the BASIC authentication type, since the two have not much in common. Start reading doc on LDAP, and code a prototype, or even better, a vertical slice of the app (i.e a proof of concept).

Help needed to compare two Key Figures and show out put

hello experts,
                   I am comparing the Sales data for two year/month. I need to compare these two KF and show the result only if one is greater than the other by 40%. Sample
Jan/2008                             Jan /2007
400                                      600
500                                      300
300                                      700
600                                      400
The columns should be outputted only if Jan 2008 is greater than Jan 2007 by 40% for all customers in a business area. Thank you all in advance.
Regards,
-Akash

Hi Akash,
Your requirement could be met by
Creating a Calculated Key Figure say variance = ( ( Jan2008 - Jan2007 ) / Jan 2008 ) *100
Then create a new Condition on Variance so as to display rows only when Variance > 40
Hope this solves ur issue.Do revert
Vasavi

Please help me i update software ios 6 and its kill my iphone

hi. im using iphone 4, 16gb yesterday i software ios 6 and its kill my cell no charging nothing just onlu logo blinks i report it at apple support center but still the same even its not charging just sign of flash coming... please help me i dnt have backup so i have to restore first ..

http://support.apple.com/kb/HT1808
Go through this troubleshooting

Help needed with referencing single Excel cells and formatting resulting text

In InDesign CS5 I am putting together a 20pp catalogue of about 200 products. The plan is to have the product information, SKU code, quantity etc fixed, but have the prices (there are two i.e. pack price and individual price) being linked to an Excel spreadsheet. This is so that the prices can be updated in the Excel file and the InDesign file will pull the new prices through. In case you are wondering why I don't pull the whole set of information through, this is because there are a lot of copywriting changes done to the information once it's in InDesign - it's only going to be the prices that will be updated.
I am planning on having two single cell tables in their own text frame, duly formatted with cell style, table style and paragraph style for the two price variables. This I am then going to have to repeat 200 times making sure I link to the next row down in Excel. This is going to be a hideous task but I see know way of modifying the cell in InDesign to point it to the next row in Excel. That's my first problem.
My second problem is this. In the Excel sheet, the prices are formatted as UK currency and are therefore like this...
£2.00
£0.40
£1.43
£9.99
£0.99
£0.09
What I will require is once I import that data (and refresh the data via a newly saved Excel file) is that the prices end up like this...
£2.00
40p
£1.43
£9.99
99p
9p
So if the value is lower than £1.00 it needs a trailing 'p' added and the leading zero and '£' sign stripped off. If the value is lower than £0.10 it also needs the zero after the decimal point stripping off.
Then formatting wise, the '£' sign needs to be superscripted and the same for the 'p'. This I am assuming could be done via GREP?
In summary, can anyone help with the first task of referecing the Excel cells on a cell by cell basis, given that it is the same cell column each time, but the next row down, and also point me in the right direction of the price formattting issues.
Any help will be gratefully received.

I would do this:
Create on line with the formatting.
Export as InDesign tagged text (TXT)
Read out these tags
In Excel exists a function to connect text from several cells and predfined text, there connect the content from cells with the paragraph styling tags. Do it in a seperate sheet. (Better would be to use a database like Access, there you can link your Excel sheet).
Export this sheet as txt file
Place this sheet as tagged text (there is an option in one of the sialog boxes).
In preferences < file handling you can specify that Tablecalculation Sheets and text is not embedded but linked, turn it on.

HELP NEEDED! Blue Screen of Death and Gray Screen

I really need a help from a OS X Mountain Lion. I have been trying to fix my Macbook Pro 15' early 2011 for about a week without succeed.
PROBLEM:
My MBP isn't sarting up. Everything looks normal the chime, Apple logo, the wheel and after those things it get stucked on a gray screen.
The computer doesn't boot from USB, DVD and the cm-R restoration isn't working.
THINGS I'VE DONE:
1. I took to an Apple authorized service in Curitiba, Brazil. They reinstalled Mountain Lion (R$90,00 or about U$45,00). After couple hours of usage. Same problem started to occur again. I call them again saying that the same problem persist and they said for reinstallation, there isn't a warranty. I have to pay again for the service.
2. Reinstall OS X. I made a partion a thumb drive and reinstalled everything. After few hours same problem again. The system wasn't starting.
3. I bought a new HD. I replaced the original HDD for a SSD OCZ Vertex 3. I installed the OSX in this brand new SSD. The computer worked for 1 hour and boom, same problem of booting and starting.
4. I have tried NVRAM and PRAM (cmd+option+P+R), nothing happened. Gray screen after the Apple logo.
5. Verbose-mode (cmd+V).
6. Single-user Mode (cmd+S).
7. Start in Safe Mode. (Shift). The bar doesn't load until the end and I get a gray screen.
8. Restoring from internet. (cmd+R). Sometimes, I get the Blue Screen or the screen turn black, but I can still hear the fan spinning.
SOME PHOTOS OF THE PROCESSES:
SOLUTION, PLEASE?
I appreciate any helpful comment. Thanks.
-- Eduardo

Download at www.memtestosx.org
Power on your MBP while holding down the Command and S keys to force Mac OS X to boot into Single User Mode. Once you see a black screen with white text, you can release the key combination. After all the system logging is done scrolling past, type 'memtest all 2' (without the quotes) to test all memory two times. Two passes should be enough to detect any blatant problems, but I wouldn’t hesitate to let it run for hours on end if I suspected an intermittent memory problem (memtest all). When complete, you should be greeted with “All tests passed” if your RAM is in good condition. If your system locks up or freezes indefinitely during the test, you may have a bad memory module on your hands.
(above taken from www.command-tab.com)

BAPI/FM Help Needed for PM Work Order Update and Notification create

Hi,
I am using BAPI - BAPI_ALM_ORDER_MAINTAIN to update the work order details and create notifications for the object list but i am getting errors in doing that.
IWO_BAPI 203 -Changing the execution factor in the BAPI is not supported
And i have to create notifications to each object in the object list. This BAPI is not supporting that.
So i used another BAPI BAPI_ALM_NOTIF_CREATE to create notification and passed the order number , counter etc to it but in the order it is creating a new row for that equipment and linking the notification to it.
Need some help on these.

Dear
1. If you want a Notification mandatory to be created for Order using IW31 you can once make this happen by User Status in Order , i would suggest if you are doing implementation better Use Order Types which has got Notification integrated in it .
Check Order type PM05 in Ideas server you have PM05 Order with notification fields integrated , which created notification in Background when order is Created or released.
2.For Work Order B --> Notification A , Not Allowing I donot have any idea check whether is there any User exit from experts or ask ur Abaper
Regards,
Edited by: Srinivas Narayana Gowda on Jun 11, 2009 1:10 PM

Help , i just archived my iphoto library, and now it won't open

How do i unzip the library and put it back? I'm getting a message that the files are unreadable. I've had sooo much trouble with iphoto since upgrading to '06 and now this! I've been getting a messaage everytime i use the iphoto to rebuild the thumbnails, so I read about how to do it with starting with the option key etc, thought i'd also back it up and archived it to use less space on the dvd and now there are a lot of missing pictures; it's like my one library just vanished, there are none of my albums or titles etc. Anyway when I was moving the library folder to the burn folder to burn it, it just vanished, and now all I have is the archived folder.

How do i unzip the library and put it back? I'm
getting a message that the files are unreadable. I've
had sooo much trouble with iphoto since upgrading to
'06 and now this! I've been getting a messaage
everytime i use the iphoto to rebuild the thumbnails,
so I read about how to do it with starting with the
option key etc, thought i'd also back it up and
archived it to use less space on the dvd and now
there are a lot of missing pictures; it's like my one
library just vanished, there are none of my albums or
titles etc. Anyway when I was moving the library
folder to the burn folder to burn it, it just
vanished, and now all I have is the archived folder.
Since posting the above I have been on the phone with a tech, I had redownload the stuffit expander, to unzip the file. I had backed up the pictures so will add them later, but here is the issue, I am very low on disk space so have added an external HD which i am trying to put photo libraries in. I printed an article "how to store libraries on exernal HD", in the rticle it says to rename the files on the original HD, can I remove them instead (after saving to disk, of course)?
Also, I have 15G of disk space we could not account for, the tech suspects hidden files, but says they do not deal with locating them and removing them, reccomended erasing HD and starting over, but would like that to be a last resort. I have four users on my machine two of which are for my grandchildren who use it mainly for "my space" and "Limewire" Has anyone here had a problem with either of these sites? I'm looking for alternaive suggestions about where the disk space has gone prior to erasing my hard drive. This is a very recent problem, and my mac is running poorly due to lack of space on the harddrive. I am moving my photo libraries to the external HD as I had planned anyway so i don't have to worry about space. It is a 250G WDC My Book Essential Edition. I am running the 6.0 iPhoto program. I am calling the support tech for iphoto but think it is unlikely that I have 15G of missing space due to photos, so could use your help. Thanks.

Help Needed-iTunes has encountered a problem and needs to close.

Hey guys,
I have had this extremely frustrating problem that just recently started occurring with iTunes. I have read many discussion forums but can’t seem to find a working solution. The problem is every time I try to open iTunes I get an error message that says “iTunes has encountered a problem and needs to close.” The same thing happens when I try to open Quicktime as well.
I have tried every solution suggested in these forums. I have completely uninstalled Quicktime and iTunes along with their components (Bonjour, Apple Mobile Device Support, Apple Software Update, etc.) and then reinstalled each of them but the problem still remains. I do NOT use iTunes for my iPod (I do not own one) I simply use iTunes to listen to my music.
I have also tried the methods of installing Quicktime by itself and not with iTunes but the problem still remains. I have tried every solution I have seen. The only method I have not tried is completely removing all files and folders that have to do with iTunes because I am worried if I delete those files with all the music I have bought it will have to be downloaded again or lost.
This is the “Error Signature” that is on the error report when I try to open iTunes.
AppName: itunes.exe AppVer: 9.0.2.25 ModName: ntdll. dll
ModVer: 5.1.2600.5755 Offset: 0001b21a
There was A LOT more information in the “Error Report Contents” but it would have taken me all night to type it all accurately. If that is what is needed then I am willing to provide any other information about this problem in hope of getting some useful suggestions or solutions. Any help would be deeply appreciated. Thanks!

that's been happening to me all day! i hope someone answers soon. bought my daughter an itunes card for christmas and now can't use it

Help needed for report on tables vbak and vbap

Hello,
I needed help in one of my work issues, this is my first project and Iam still learning. kindly help.
I was asked to take erdat,vbeln,posnr from selection screen and compare it with the data already in tables vbap,vbak. If the data
already exists and exception needs to be raised saying that the 'data exists',but if the data is not present in the tables the
tables have to be updated. This has to be done using function module only.
Then I have to write a REPORT calling the above function module and finally displaying the number of records updated and the
list of them.
I have started writing a function module:
FUNCTION z_tableupdate.
""Local Interface:
*" IMPORTING
*"     VALUE(DATE) LIKE VBAK-ERDAT DEFAULT SY-DATUM
*"     VALUE(SALESORDERNO) LIKE VBAK-VBELN
*"     VALUE(ITEMNO) LIKE VBAP-POSNR
*" EXPORTING
*"     VALUE(EX_VBAP) LIKE VBAP STRUCTURE VBAP
*"     VALUE(SYS) LIKE SY-SYSID
*"     VALUE(EX_VBAK) LIKE VBAK STRUCTURE VBAK
*" EXCEPTIONS
*"      DATA_UPDATED
*"      DATA_EXISTS
SELECT * FROM vbak INTO vbak_wa WHERE erdat = date
                                    AND vbeln = salesorderno.
ENDSELECT.
SELECT * FROM vbap INTO vbap_wa WHERE posnr = itemno.
ENDSELECT.
IF sy-subrc EQ 0.
    ex_vbap = vbap_wa.
    ex_vbak = vbak_wa.
ELSE.
    RAISE data_exists.
ENDIF.
sys = sy-sysid.
ENDFUNCTION.
How is the above code for function module, will this work??
Now can I write a report to call the above function module and update the record?? if so, how to update ??? please help...Lots of thanks in advance.

Hi
Welcome to SDN forum
Whay can't you write a simple report in SE38.
why you are using Fun module
Nothing wrong in it.
But first become perfetc in reports in SE38 and then do using the fun modules
write a simple select statement like
SELECT AVBELN AERDAT BPOSNR BMATNR
INTO TABLE ITAB
FROM VBAK AS A JOIN VBAP ON
AVBELN = BVBELN
WHERE A~VBELN IN S_VBELN AND
             A~ERDAT IN S_ERDAT AND
             B~POSNR IN S_POSNR.
IF SY-SUBRC <> O.
WRITE: / 'No data found'.
ENDIF.
First write this in SE38 by defining a proper selection screen and internal tables
then do as fun module
see the doc for fun module
Function Modules;
Check this matter.
Function Modules are Global ABAP programs created by SAP for reusable purpose.they have IMPORT,EXPORT and TABLE parameters, and EXCEPTIONS to through when error occurs.
You can create them from TCode SE37.
Go through the following doc:
Function modules are cross-program, reusable procedures that are organized into function groups, and whose functions are implemented between the statements FUNCTION and ENDFUNCTION. Function modules and their interfaces are created in the Function Builder.
Function Module Interfaces
The parameter interface of a function module is defined in the Function Builder. It includes the definition of interface parameters and the specification of exceptions that can be triggered by a function module. The Function Builder automatically generates comment lines below the FUNCTION statement in the source code of the function module, which represent the interface of the function module with the following syntax:
Syntax
... [IMPORTING parameters]
[EXPORTING parameters]
[CHANGING parameters]
[TABLES table_parameters]
[{RAISING|EXCEPTIONS} exc1 exc2 ...]
The syntax and semantics of IMPORTING, EXPORTING, CHANGING, RAISING, and EXCEPTIONS mainly correspond to the definition of method interfaces with [CLASS-]METHODS. The additional option of defining table parameters using TABLES is obsolete.
Interface parameters
The interface parameters are defined on the relevant tab pages in the Function Builder.
IMPORTING parameters are input parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input parameter. The content of the actual parameter is passed to the input parameter when the call is made. The content of an input parameter for which 'pass by reference' is defined cannot be changed in the function module.
EXPORTING parameters are output parameters. When the function module is called, a suitable actual parameter can be specified for every output parameter. The content of an output parameter that is defined for 'pass by value' is transferred to the actual parameter if the function module is completed without errors. An output parameter that is defined for pass by reference is not initialized when the function module is called.
CHANGING parameters are input and output parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input or output parameter. When the function module is called, the content of the actual parameter is passed to the input/output parameter, and when the function module is completed, the content of the input/output parameter is passed to the actual parameter.
TABLES parameters are table parameters. Table parameters are obsolete CHANGING parameters that are typed as standard tables with a header line. If an internal table without a header line or a table body is passed as an actual parameter to a formal parameter of this type, an empty local header line is generated in the function module. If an internal table with a header line is used as an actual parameter, both the table body and the header line are passed to the function module. Pass by value is not possible in formal parameters defined using TABLES. Formal parameters defined with TABLES can be replaced by formal parameters defined with CHANGING. A local work area can be created for the internal table in the function module by using the addition LIKE LINE OF itab of the DATA statement.
Exceptions
The exception of a function module are defined on the Exceptions tab page in the Function Builder. Here you can select exception classes to define whether class-based exceptions are declared or non-class-based exception are defined. Class-based exceptions are represented in the above syntax by RAISING, and non-class-based exceptions are represented by EXCEPTIONS.
The addition RAISING is used to declare class-based exceptions that can be propagated from the function module to the caller. Exceptions in the categories CX_STATIC_CHECK and CX_DYNAMIC_CHECK must be explicitly declared, otherwise a propagation can lead to an interface violation. A violation of the interface leads to the treatable exception CX_SY_NO_HANDLER. Exceptions of the category CX_NO_CHECK are implicitly always declared. The declaration of exceptions of the category CX_STATIC_CHECK is statically checked in the syntax check. For exceptions of the category CX_DYNAMIC_CHECK, the check is not performed until runtime. In a function module in which class-based exceptions are declared with the RAISING addition, the statement CATCH SYSTEM-EXCEPTIONS cannot be used. Instead, the relevant treatable exceptions should be handled in a TRY control structure.
The addition EXCEPTIONS is used to define a list of non-class-based exceptions that can be triggered in the function module using the statements RAISE or MESSAGE RAISING. Exceptions defined in this way - as with formal parameters - are bound to the function module and cannot be propagated. If an exception of this type is triggered in a function module, and no return value has been assigned to it with the homonymous addition EXCEPTIONS of the CALL FUNCTION statement when the call was made, this leads to a runtime error.
Note
For new developments after release 6.10, SAP recommends that you work with class-based exceptions that are independent of the function module.
RFC is a technology which is used to access a functions (Modules) from
the remote systems.
If a function module is set as remote enabled which can be access from
the remote system via RFC.Eg: U can access the Remote enabled function modules in ur VB,Webdynpro,Java,Visual composer program.
A function module can be set as remote enabled by SE37->Go to ur FM->click the option Button "remote enabled".
But Normal function modules can not accessd from the remote system.
Good Example for RFC enabled function module is : BAPI(Business Application Programming Interface)
Note: All BAPIs are Remote enabled but not all remote enabled function modules are BAPI.
CALLING A FUNCTION MODULE:
1)In U ABAP Editor --> Click "Patter" ---> Selection Option Button "Call Function"
--> Write the Corresponding FM name --> Hit Enter
2)The appropriate import ,export Parameters will be displayed in ur editor
3)Pass the Values Here.
Also check these links.
http://www.geocities.com/victorav15/sapr3/abapfun.html
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
See the following links:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
Regards
Anji

// Code Help need .. in Reading CSV file and display the Output.

Hi All,
I am a new Bee in code and started learning code, I have stared with Console application and need your advice and suggestion.
I want to write a code which read the input from the CSV file and display the output in console application combination of first name and lastname append with the name of the collage in village
The example of CSV file is
Firstname,LastName
Happy,Coding
Learn,C#
I want to display the output as
HappyCodingXYZCollage
LearnC#XYXCollage
The below is the code I have tried so far.
// .Reading a CSV
var reader = new StreamReader(File.OpenRead(@"D:\Users\RajaVill\Desktop\C#\input.csv"));
List<string> listA = new List<string>();
while (!reader.EndOfStream)
var line = reader.ReadLine();
string[] values = line.Split(',');
listA.Add(values[0]);
listA.Add(values[1]);
listA.Add(values[2]);
// listB.Add(values[1]);
foreach (string str in listA)
//StreamWriter writer = new StreamWriter(File.OpenWrite(@"D:\\suman.txt"));
Console.WriteLine("the value is {0}", str);
Console.ReadLine();
Kindly advice and let me know, How to read the column header of the CSV file. so I can apply my logic the display combination of firstname,lastname and name of the collage
Best Regards,
Raja Village Sync
Beginer Coder

Very simple example:
var column1 = new List<string>();
var column2 = new List<string>();
using (var rd = new StreamReader("filename.csv"))
while (!rd.EndOfStream)
var splits = rd.ReadLine().Split(';');
column1.Add(splits[0]);
column2.Add(splits[1]);
// print column1
Console.WriteLine("Column 1:");
foreach (var element in column1)
Console.WriteLine(element);
// print column2
Console.WriteLine("Column 2:");
foreach (var element in column2)
Console.WriteLine(element);
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

Help needed! I don't understand and dont know what to buy!

Hi there
I am trying to work out whether to buy a 30 or 80 gig Ipod; I am going o/s to South America later this year and want to save photos on my Ipod. I am just wondering a few things:
1. is it possible to put photos straight from camera to ipod?
2. is it possible to put photos onto Ipod from computer that doesn't have itunes (ie. in internet cafe)?
3. once photos are on ipod only, can i put them onto my computer back home?
4. does the resolution/size of photos get changed
Is it worth doing this or should I just get the 30 gig and save my photos on cds? I am sooo confused!!!!
Thanks for your help!!!

Hi.
1. Yes. You need the camera connector and a compatible camera.
2. Yes. My advice if not using your computer is to enable disk use on your iPod via iTunes, then when you connect it in an internet cafe, you can delve around the various folder and access your pictures.
3. Yes assuming you don't delete them (if you are on a mac it will load them into iPhoto for you).
4. No.
It depends. If you are going away, have an ipod and a camera, then there unless you want to buy lots of sd cards or the like, then it's a great alternative.

Help needed- Caller tone application using JTAPI and JMF

Hi to All,
I want to make a Caller Tone Application for Cisco IP phone.
For that application I am using JTAPI and JMF.
I am new to this two technologies.
Can somebody help me for how to accomplish this?
---Ashish

Hi Jerry,
You can run analog input and counter tasks concurrently. You can start them using software timing basically at the same time which may be fine for your needs and is the easiest to implement. You also can use a hardware start trigger to start the tasks if you prefer. It all depends on the level of synchronization you need.
You have not mentioned at what rate you will be acquiring data on your analog inputs. The M Series PCI-6225 has 80 analog inputs and may suit your needs. You will need to know what sampling rate you are trying to achieve. Any M Series device will definitely give you the best value.
Hope this helps!
Laura

Help needed on "Archiving in R/3 and its impact"

Similar Messages

Maybe you are looking for