Help needed on embedding a video in Acrobat ICS3

I've been able to easily embed a video into an Acrobat 8.22 doc, but I need to get it to loop.
It's a .mov file
Any thoughts how to do this?
TIA

Seemed to have "stumped the stars" on this one. Was hoping there was a option from within Acrobat to do this.
Any ideas what forum might help me better if Acrobat is not the right one?
You cannot embed the looping behavior into a movie from within QT.
Was hoping someone who had done this before would have the magic answer :-)
Might I have to convert this to Flash to enable this behavior?

Similar Messages

16:9 Help needed. Workflow: extracted video from DVD, FCE HD edit & DVDSP.

Hi,
I have a project where according to the camera person it was shot in 16:9 with the camera (assuming a DV camcorder of some sort). It was captured from the camera and converted to a DVD (VIDEO_TS folder and everything) and sent to me for editing.
What I need help with is a workflow (and settings) to edit and output this properly.
1) My first hiccup comes in the extract. When I view the DVD that was sent to me, the video looks squished as it squeezes the video into the 4:3 aspect ratio. I was using MPEG Streamclip to extract it. I've extracted it in a 16:9 QT format and it looks fine in FCE HD. However, once I started reading more about editing 16:9 video in the FCE PDF manual, I'm wondering if I should have kept it as 4:3 and then toggled the Anamorphic setting for the sequence.
2) Once I have the correct source to edit - are there any considerations on export for compression? I read somewhere about a program to set the anamorpgic bit for iDVD, but plan to use DVDSP so I'm assuming I can skip this step. I also read in the forum about a QT Conversion setting to use. Do I need to? I was planning to export a reference movie and use Compressor with that. I was planning to use a "Widescreen" compressor option. Is this correct?
3) I know this is beyond this forum, but any advice on what settings should I use in producing the DVD? As noted above I plan to use DVDSP 3 to create the DVD, and I do notice the 16:9 settings in there for each track. I was planning to use the 16:9 Letterbox track setting. Is this correct?
Any other pitfalls I should be aware of as I navigate the 16:9 jungle?
Thanks in advance.
Sean
12 PB Rev C (1.33 GHz G4) & PowerMac G5 Dual 2.0 Mac OS X (10.4.7)

Chandan
First, with regard to your chipset - graphics/video card:
Mobile Intel® GM45 Express Chipset, featuring the Mobile Intel® Graphics Media Accelerator (GMA) 450...
Your graphics card has no video RAM (VRAM) of its own. So, it must use some of your system RAM to be able to function. This is 'dynamically allocated'. That is, your system decides how much system RAM to allocate to the graphics card. I am not aware of anyway to manually control this.
Next, you said you have installed Windows XP. Toshiba India has not posted any XP drivers for your system. Toshiba laptops are very finicky about using Toshiba 'tweaked' hardware drivers to be able to function properly. This computer is a Toshiba European version of your model, and it would appear to have a full set of XP drivers, these will work just fine in your system:
Satellite Pro C650 PSC11E Downloads
The order you load the hardware drivers and Toshiba utilities is critical. The files available for download above are all zip files, so you will have to extract the .exe files to be able to install them. Install the drivers first, then the Toshiba utilities, and given that you already have XP basically working install in this order:
1st Drivers:
1) Chipset
2) Storage Manager
3) Display
4) Sound
5) then all other XP hardware drivers
2nd Utilities:
1) Common modules
2) Hotkey utility
3) all other XP Toshiba utilities.
Good luck.
Mike

Help needed: How to import video from Canon Legria Camcorder FS306?

Dear all,
After happily purchasing Canon Legria Camcorder FS306, I realise that my IMOVIE HD could not detect the camcorder when connected to my Macbook pro.
Have 2 questions here:
1. Is it impossible for IMovie HD to detect newer camcorders? Should I then upgrade to IMOVIE09?
2. Currently, Canon Legria Camcorder FS306 is not listed as 1 of the supported camcorders for IMOVIE09. It is one of the newer models. Is IMOVIE09 able to import video from this camcorder now? Or in the near future? Or it may never be supported?
Tks!
Gam

You would need imovie 09 to use this camcorder.
This camcorder is not on the iMovie 09 supported list. However, every Canon camcorder since 2008 has supported iMovie 08 and 09, so odds are good that this one will, too. Odds are good that it works right now. IF you want to know for sure, call Canon. ....or take your camera to an Apple Store and hook it up.
It might be possible to do some manual conversions and continue to use iMovie 6. For example, you could try converting the MPEG2 files to DV using a tool like MPEG Streamclip. You would also need the $20 Apple QuickTime MPEG2 Playback Component. I find iMovie 09 to be a much better editor, but if you are comfortable with iMovie 06, this might be worth a try for you.

Help needed: Resizing a whole video track

Hello everyone
For starters, forgive my poor english syntaxis
Recently i have filmed a concert with several Gopro cameras (in 1280x960) and a 7D (in 1920x1080).
Now i want to edit all this in Premiere, with a final format of 1280x720. I'll have bits of gopro film and bits of 7d film.
What i want to do is have, for example, a Gopro track with my gopro bits and a 7D track with all my 7D bits. My gopro bits fit perfectly in the comp, since they have the good width (it crops the height, but that's what i want), but the 7D clips are too big (1920x1080 instead of 1280x720). I could resize each one of my clips in the properties, but since they are WAY too many of them, i would like to scale down the whole 7D track. Is there a way to do that?
Thank you!
Ricardo.

I thought about editing the whole 7D track in a dedicated sequence, but it would mean jumping back and forth the main sequence and this one to edit the movie... Not very pratical.
But the 'scale to frame size' is almost perfect. Should have thought about that. Thanks!
Anyway, there should be a global track effects/transform control, not only for size but also color correction, rotation, position, etc without having to precomp everything. Don't you think?

I need help embeding a video in a pdf

Hello,
I created some video files in Camtasia. I saved them in a .swf format. Then I tried to embed them in a pdf file in acrobat and it says they are not a recognizable 3D format. What should I do?
thanks,
kimbo-jo

Starting with Acrobat 9 one doesn't need the parent movie application installed in order to view video's from within Acrobat. So did you add the movie correctly ? Did you follow the instructions in the Acrobat Help files for imbeding movie/video ?

Need to convert music videos that are tagged as "Movies" and re-rag them as "Music Videos" to get them out of my movies library and into the Music Video folder. Likewise, I ha e some educational videos that belong in "Podcasts." Help?

Need to convert music videos that are tagged as "Movies" and re-rag them as "Music Videos" to get them out of my movies library and into the Music Video folder. Likewise, I have some educational videos that belong in "Podcasts." Help?

Select/highlight the ones that you want to change in your iTunes library, do Get-Info (control-I) and change their Media Kind on their Options tab to 'Music Video' - and then similarly for the podcasts.

I have added/embedded four videos on my website, but when I scroll down, the videos scroll in front of the top menu instead of behind as it should. I have tried changing layers, etc., and nothing works. Can you help?

I have embedded 4 videos on my website. It is a single page, scrolling site. When I scroll down, the videos scroll in front of the top menu bar, instead of behind it. I have tried changing layers, etc., and nothing works. Please help.
Thanks.
Paul W. Norman

Hi,
Kindly create a new layer, via the Layers panel:
Then, right click on the navigation bar, and choose Move to Layer > Layer 2
Ensure that Layer 2 is on top of the other layers.
Hope it helps,
Sonam

Help! I have an Adobe Premiere Pro CC 2014 sequence @ 59.94 fps and need to export the video as 23.976 but the video looks glitchy! Please Help!

Help! I have an Adobe Premiere Pro CC 2014 sequence @ 59.94 fps and need to export the video as 23.976 but the final video render looks glitchy! Please Help!
I made a new sequence at 23.976 and imported my 1280x720 59.94 video into the sequence... when i rendered it out it looks glitchy!
my client is not allowing 1280 x720 59.94 video files they want 29.97 progressive,25,24,or 23.98
Please Help what do i do! where did i go wrong! this is horrible omg!!!! please help!
Thank you!

Nice!
In my export setting i switched the frame rate to 29.97 and it looks good to me!
Thank you!

Need help with a activation code for Adobe Acrobat X Standard for my PC,, Don't have older version serial numbers, threw programs away, only have Adobe Acrobat X Standard, need a code to unlock program?

Need help with a activation code for Adobe Acrobat X Standard for my PC, Don't have older Version of Adobe Acrobat 9, 8 or 7.

You don't need to install the older version, you only need the serial number from your original purchase. If you don't have them to hand, did you register? If so, they should be in your Adobe account. If not you really need to contact Adobe, though it isn't clear they will be able to do anything without some proof of purchase etc.

What HTML code do I need to get Adobe Flash to play an embedded MP4 video file (8 MB)?

What HTML code do I need to get Adobe Flash to play an embedded MP4 video file (8 MB)?
Thanks
Mark

Here are a couple of ways, one using the Netstream class and the other using the FLVPlayback component.
For the NetStream approach, the following in the timeline code will play/loop the intended mp4 file...
     var video:Video;
     var connect_nc:NetConnection = new NetConnection();
     connect_nc.connect(null);
     var stream_ns:NetStream = new NetStream(connect_nc);
     stream_ns.client = this;
     function netStatusHandler(p_evt:NetStatusEvent):void {
         if (p_evt.info.code == "NetStream.Play.Stop") {
             stream_ns.seek(0); // to loop the video
     stream_ns.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
     video = new Video();
     addChild(video);
     video.attachNetStream(stream_ns);
     stream_ns.play("path_to/your.mp4");
For the FLVPlayback component, add it to the stage, give it an instance name ("fp" used below), assign your mp4 file ("path_to/your.mp4") as the source property in the Properties panel, and select the option to autoplay as well. Place the following code in the timeline...
     fp.addEventListener(Event.COMPLETE, playAgain);
     function playAgain(evt:Event):void {
         fp.play();
To put the Flash swf file in an html page, in the Publish Settings set it to publish an swf and an html page. Publish the file an the html page will be created for you.

Help needed in playing HTML ' object ' videos with formats mov, avi, wmv...

Hi,
Here is where I am at this juncture...
I have a requirement wherein I need to render an HTML text containing an '<object>' tag which embeds a video, for example:-
<object width="320" height="240"
           data="javascript/media/ABC.wmv"
           type="application/x-mplayer2">
          <param name="url" value="javascript/media/ABC.wmv" />
</object>
Now I need to render this video into my Flex Web Application.
One way to do it, as I see, is somehow extract the 'data' attribute and put it as a 'source' for spark VideoPlayer.
Is there any better way to do this?
Also note that, I require to render all video formats (avi, mov, wmv etc.) and not just flv or f4v. Any pointers for this would be appreciated.
Thanks

Not so "easy share" after all is it?
Still Capture specs read as follows:
Still capture
Still format
JPEG/EXIF v2.21
Picture size
12.0 MP (4000 × 3000)—4:3
10.7 MP (4000 × 2664)—3:2
9.0 MP (4000 × 2256)—16:9
6.0 MP (2832 × 2128)—4:3
3.1 MP (2048 × 1536)—4:3
2.2 MP (1800 × 1200)—3:2
2.1 MP (1920 × 1080)—16:9
1.2 MP (1280 × 960)—4:3
Compression
JPEG/EXIF v2.21
Color modes
high color, natural color, low color, sepia, black and white
Sharpness
high, normal, low
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=11619&pq-locale=en_US
Question: Are these still images jpeg or Kodak's EXIF? or are you using the camera in HD movie mode where iMovie fails to recognize the file format/s?
If you read the system requirements for this device it clearly states X.3 or higher. However, I'm wondering if this also includes X.5.1 or not .....
Message was edited by: SDMacuser

Help! I need to export a video in 2k with 1.89 aspect ratio

Hello there! I need help! I need to export a video in 2k with 1.89 aspect ratio. I dont know what else to try. If someone could hep me I will really apreciate it. thanks!

What are you going to do with a 2k export?
What was your Edit Sequence Setting?

Need plug in to display embedded youtube videos in forums

Since i installed mozilla (after pc format) i cannot see embedded youtube videos in my website. In fact, on every
embedded video i get thisQ (see screenshot plz) http://gyazo.com/69469217f25d5e3f9b90d645fab7904b
so which plug in is needed for this?

Update your Flash Player '''Version 17.0.0.169<br>https://www.adobe.com/products/flashplayer/distribution3.html'''
See if there are updates for your graphics drivers
https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help...............

Fix for embedding YouTube video in powerpoint?

Is there a fix coming soon for embedding YouTube video into powerpoint? I've tried all suggestions - reinstalling, deleting Version=3, the ampersand issues, etc.). I need this functionality for an upcoming presentation in a week. Please help!!!

Mac Office Powerpoint

Help needed on embedding a video in Acrobat ICS3

Similar Messages

Maybe you are looking for