Help Needed on Freeze Frame Pic

I have a clip of video I freezed framed. Now I want to place a real fish pic on top on left corner of freeze frame pic. How do I do this? It is for a background Image I want to use on a website. Any help with this issue would be greatly appreciated.
            Thank you,
                        Marvin Engel
                   [email protected]
            www.BigMFishingCharters.com

BigMFishing
What version of Premiere Elements and on what computer operating system is it running?
Assuming Premiere Elements 13/13.1 for now
Video on Video Track 1
Fish Picture logo on Video Track 2 directly above Video on Video Track 1
For JPEG
Move Timeline Indicator to frame, then
Publish+Share
Computer
Image
For Other...Tools Menu/Freeze Frame and .bmp
Have you tried either yet?
ATR Premiere Elements Troubleshooting: PE11: Freeze Frames, Single or More Than One at a Time
Please review and consider. If you have questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Similar Messages

  • Help needed with drop frames

    Hello everyone,
    A few weeks ago with the help of some of the participant on this panel I change my settings and move my scratch disk from my internal HD to the external one.
    Since then it seems that I have a lot of drop frames on the video as well as on the audio: and it seems that the problem is worsening.
    Any suggestion to try to remedy to this problem will be greatly appreciated.
    Thank you very much.
    Guy.

    I guess I have a problem with my external drive (LaCie 250 GB). I was working this afternoon and I noticed that I had a lot of dropped frames in a clip in the viewer and when replaying the same clip the drop frames were not at the same place.
    So my question is : what's a good external drive?
    This one is about 2Yrs old . Is that an average life time for this kind of material ? or was I unlucky?
    Any suggestion on what I should do or try would be gretly appreciated.

  • NEWBIE: Help needed - Eclipse freeze after starting WLS 9.2

    Hi All,
    I'm very new in development with wls 9.2 and eclipse.
    I'm trying to create a simple application (an EAR with a Session Bean).
    When I start the WLS inside Eclipse (debug or run mode), this one, after a few seconds or clicks, freeze with 99%CPU usage.
    Thanks in advance for help.... it's urgent....
    Eclipse 3.3.0
    WLST 1.1.0
    WLS 9.2
    Edited by mtode at 10/07/2007 2:04 AM
    Edited by mtode at 10/07/2007 2:05 AM

    If I understand you correctly, Eclipse stops responding after a while.
    This may not be actually related to starting WLS. It sounds a bit like
    you might be having a memory problem. Could you specify your operating
    system, the amount of physical memory and the contents of your
    eclipse.ini file?
    Thanks,
    - Konstantin

  • Urgent Help Needed with missing frames

    Hi guys
    I have a student with an urgent problem that I can't seem to fix.
    The student is making a film having shot it on mini DV tape. He has been editing the film in Adobe Premiere Pro CS5.5, editing sections in different sequences.
    The problem he is having is when he moves a selection of clips on his timeline random frames or half frames disappear, leaving a very quick flash to black.
    I cant work out why the frames are disappearing when moving clips up and down the timeline, any suggestions?
    Thanks
    SteveG

    The settings for a sequence cannot be changed once it is created.
    If source footage is being interpreted wrongly, right-click the source file on the project panel and choose Modify > Interpret Footage. You can now create a new sequence that matches the real properties of your footage.
    Dragging one sequence into another won't cure the problem; you have to copy the footage from the timeline into the new sequence so it reverts to the new sequence frame rate (assuming the footage has been defined properly in the project panel it will then be correct).

  • SonyAVCHD video looks great in iMovie11 or iDVD7.1.2. When I burn a DVD it's terrible. If I freeze frame I see squares. The picture has poor contrast. I've viewed DVD on my 6-year-old, 24 in. intel 2.16 GHz iMac, and on TV. Help!

    I just bought a very good quality Sony AVCHD camcorder. I also just upgraded my computer from Tiger to Snow Leapord. My iMac is a 6-year-old, 2.16GHz Intel 2 Duo, with a 24 inch screen and 3GB Ram.
    My Sony camcorder HD video looks great in iMovie11 and in iDVD7.1.2., but when I burn a DVD "professional" it looks terrible. If I look at a freeze frame on the DVD I see image made-up of squares. The picture has poor contrast. It looks as bad as poor quality VHS. Do I need to get a new iMac to make this work? Is it possible to make a sharp, clear DVD from AVCHD footage with a 6-year-old iMac like mine?

    That thread helped for a time.  But now it seems as though my computer is back to slow again.  But, some of the jargon is over my head as well.  Not sure I knew quoite everything they were talking about.  But thanks a lot for that, it helped I probably just need to reread it and follow the instructions again.  Thanks so much.

  • I am struggling! Help! I need to move 3500 pics-in TIFF format in 175 folders and sub folders from my old PSE6, Windows XP to my new PSE13, Windows8.1. I have the PSE6 backed up on an external hard drive. What is the safe way to do this? Can anyone at Ado

    I am struggling! Help! I need to move 3500 pics-in TIFF format in 175 folders and sub folders from my old PSE6, Windows XP to my new PSE13, Windows8.1. I have the PSE6 backed up on an external hard drive. What is the safe way to do this? Can anyone at Adobe help me? Please?

    Use the Organizer backup & restore method, starting the restore from the TLY file. Probably best to use a custom location as the XP file structure will be different. See this link for further help:
    http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html

  • Help. sending fcp timeline to color changes some clips to freeze frames

    I was finishing a project in FCP that was shot on the RED. I had a number of deliverables. I cut in FCP with REDs M-res proxy QT files then uprezed (replaced the footage) to H-res for my conform.
    I then "sent to color" a number of different timelines. Everything was on one layer and there were no effects or speed ramps on any of the clips.
    About half the time, the timelines would be fine. The other half of the time some of the shots came in as freeze frames from earlier in the clip. This was very problematic in that I couldn't color the same scene fully. I needed to get it done in a day so I had to match what color was doing in FCP with the clips that would not come across.
    I moved the clips in the timeline but they would only come in as freezes.
    Anyone heard of this before?
    It compromised the quality of my job and ended up being very costly.

    Let me get this straight.
    You were editing with the proxy container Quicktimes in Final Cut?
    If that is true, then I'm sort of surprised that COLOR opened at all.
    You should have actually "down-rezzed" the QT containers to the "P" proxy. That will cause COLOR to open up and link to the original R3D raw 4K files (if that's what you were working with). That also raises the spectre of 3K... tell me that's not so, or that is Strike Two.
    There is an associated utility with the "Clipfinder" software called ColorFixer (doesn't have anything to do with film processing) that will take away the so-called and well-documented "looping bug" that afflicts large-ish spanned RED files.
    That's a couple of things that occur to me right away...
    jPo

  • Freeze Frame Does Not Work Properly Please help

    I have a sequence that will be cut into a master sequence consisting of six video tracks. When I invoke the Freeze Frame command, the resulting freeze frame only has the video from the bottom track (V1). This happens no matter where the playhead is when I select Freeze Frame. Even after rendering the sequence a Freeze Frame will only contain the video from the bottom track. Why???
    FCP HD 4.5
    Mac OS 10.3.9
    QT 6.5.2
    G4-500DP   Mac OS X (10.3.9)  

    The Freeze Frame function targets the bottom most track with the AUTOSELECT button active. Autoselect is the gray box to the right of V1, V2, etc.
    Are all your video tracks composited so that they are all visible at once? Then try nesting them, THEN making the freeze frame.
    Shane
    "There's no need to fear, UNDERDOG is here!"

  • HELP! Why does FCP Crash when Batch Exporting Freeze Frames?

    I have been Batch Exporting a lot of freeze frames recently but just last week FCP just started to crash when I tried exporting. It will let me export one single freeze frame but no batches. Also, when I open FCP now some of the freeze frames I have made looks what appear to be like green digital hits on them. I thought it was a space issue but I have plenty of room and I've taken out my FCP Preferences and nothing seems like it's working. I have final cut version 5.1.4 and the Error Message Reads: "The Batch Export failed for some items. Please review the status column to identify which items had errors." When I check the status it says "File Error: Unknown Folder" which I don't understand at all.
    Any ideas?
    Power Mac 10.4.10    
    Power Mac    

    Well it seems like it might be an OS or hardware problem rather than a FCP problem, however...
    Have you installed Diskwarrior on your startup drive? If not, do it, and try launching it from your startup drive and then try running it on all other drives.
    Describe your hardware configuration (you should really post all your system specs in your profile here). Can you change the batch export destination to another drive? Describe what your source material is, your sequence settings and the export settings. You might try changing your export settings.
    This is not normal behavior and I'm sure we can solve this.
    Message was edited by: Michael Grenadier

  • Help with Freeze Frame :)

    Greetings all,
    Sometimes when I use freeze frame the still image is great. Other times it is fine when rendered but then blurry on a DVD.
    Is there a way to create a  single frame still from a video clip?
    thanks!

    One way:
    After you have your still frame on the timeline, go to the Effects Tab > Video Filters > Video and drag the Deinterlace filter on to it.
    MtD

  • Freeze frame is no longer working - HELP PLEASE

    Hello all,
    While editing, I think I hit a key to turn off freeze frame. Tried shift n and modify freeze frame with no success. I am trying to make a freeze frame at the end of a keyed clip. Any suggestions? Thank you
    FCP 6.0.5
    iMac intel

    Thank you David,
    I failed to mention, I have been making freeze frames throughout my project, all of a sudden I am unable to. I also posted my problem on creativecow.com, the obvious answer was given, trash preferences.... Thank you for your response.

  • Trouble with making a freeze frame?

    Hello All,
    I need some help with something I'm trying to do.  I have a short clip in my timeline that I have color corrected and added some filters to.  Then I move the playhead around until I find a still picture that I like and then I go to Modify>Make Freeze Frame and then I move the still from the viewer over to the section that hold all the files.  The trouble is that when I make the freeze frame FCE is giving the version before I did color correction or adding the filters.  How do I get to make a freeze frame that has been color corrected?  It's showing me the raw version before I've done anything to it.
    Thanks for your help.
    MIke

    When the freeze frame is created in FCE, it is only from the master clip (with no filters applied).  Simply drag the filters that you applied to the clip to the new freeze frame.  The filters will be applied with the settings you made.
    -DH

  • Make freeze frame without blur on motion

    I want to make freeze frame on video but the problem is sign language signing make blur motion. I need to get sharp clear make freeze frame. Is there a way that can make sharp to make it freeze frame.
    video clip is 1920 x 1080, 30 fps
    Make freeze frame is for book so need to make motion clear? How?

    Then there's not much you can do now.  It would have helped a little if you'd have used a high shutter speed on the video camera, but that's water under the bridge.
    The only thing I can think of off the top of my head would be to find another frame where the hand wasn't moving then export both frames as s till image.  Open both in Photoshop and make a selection of the hand then copy that to the first still.
    -DH

  • Chroma Keyer and overlaying an object in FCE on a freeze frame.

    I seem to have lost my notes in a recent move, need help.  I shoot sports footage and I am using FCE.  I have a series of 2 second freeze frames that I nedd to overlay a green arrow (pdf imported from Pages.)   What are the steps using chroma keyer to 1. get rid of all the matter other then the green arrow (with the dropper) 2. anchor the arrow over a point and 3. rotate arrow to point at subject.   I vaguely remember it being fairly straight forward but I am missing something.
    Is there a way to get the pdf or jpg arrow removed from it background before importing into FCE......so I can just import the arrow shape and not the page?
    Many Thanks

    The easiest way to do this is to convert the graphic (the arrow) to  one with a transparent background, then you won't have to do any keying at all.
    Open you PDF file in Preview.app.
    Save the file as a .png file.
    Now you should have the arrow as a .png file loaded in Preview.
    In the toolbar, click on the triangle nest to the Select button, and choose "Instant Alpha"
    Click down and drag you mouse a slight bit on the background you wish to remove, and release the mouse button.
    The background should now be selected.
    Press the Delete key.
    The background should now disappear, leaving just the arrow.
    Now save your document again.
    If you now import your .png version of the arrow into FC, you can just place it above the video you want it to appear on and it will automatically be keyed correctly.
    MtD

  • Freeze-frame in iDVD

    I'm creating a slide-show in iDVD. 2 questions: 1) Can I freeze-frame one of the slides so an extended audio track can play behind the still image? And 2)Can I designate different transitions within the slide show, i.e., the 1st slide "twirl", the next 20 "dissolve", the last slide "fade"?
    Thanks.

    Welcome to Apple Discussions!
    You can do both of these things if you create your slideshow in iPhoto. You will be able to set the duration of each photo so that one can play as long as needed. Also, transitions, can be varied as well. In iPhoto, while working on the slideshow, click on "Adjust"; this will open a window in which you can individualize the duration and transition for each photo. When you have things the way you want, export the slideshow to iDVD for completion of the project.
    I hope this helps.

Maybe you are looking for