Help needed on Unity Connection

I'm setting up a new branch office with CUCM and Unity connection in HQ and h323 GW in branch office. The phones are registered with HQ CUCM and everything works fine. The issue is with Unity Connection. I followed exactly how other remote site is setup. However, when I dialed the new remote office, it rings and it goes to our company main greetings not their individual voice mail box. On the CUCM side, I created VM pilot and VM profile for a new office along with calling search space, partition. And, assigned all new DNs to a new VM profile. Any suggestion? I'm very new to Unity Connection.
Thanks.

Hi Peter
How is your CUCM integrated with Unity Connection ? By VM Ports or Sip Trunk ?
Regards
Aditya Gupta

Similar Messages

HELP NEEDED. Cannot connect to Music Store.

After upgrading to iTunes 6 I have been unable to connect to the Music Store or download any tracks. Its not my Norton Internet Security and my Windows Firewall is off. In fact, nothing has changed on my PC apart from upgrading iTunes, at which point everything went wrong!!
I've tried uninstalling and re-installing numerous times, restoring my PC to an earlier time when all was well and I've also tried installing standalone Quicktime from the Apple website, but every time I get an error message saying that some of the files are corrupt and to install it again, which I do, then I get the same message.
In desperation I managed to re-install my previous version of iTunes 5 (with which I had absolutely no problems at all) but unfortunately I still can't connect to the Music Store or download any tracks, so basically there is no point in me using the iPod or iTunes at all.
If anyone knows how I can solve this problem I'd be really grateful for some input.
Thanks.
Bec
eMachines 420 Windows XP

.
I'm getting the same error message when i connect my linksys router. With the router connected I can get on the internet just fine. Thw problem is that music store in iTunes is refused. I can access the music store if i connect the modem directly to my PC. This leads me to believe the internal firewall in the router needs to be configured to allow iTunes to connect to the music store. If any one knows how to do this that would be great. I think it would also help a lot of other people having this as well Windows XP </span<br>
Windows XP

Help needed:MBP net connection slow on OSX but fast on Vista...

Ok..I've searched these forums for a while, seen lots of posts taking about people having problems with their airport card, routers and the like..but I haven't seen anyone having quite the same problem as me. My 17" 2.33Ghz C2D is linked to my 1Mb ADSL internet connection via an Aztech DSL600EW modem router.The problem is that the connection speed is really slow when I'm running the machine on OSX. I know it's an OSX thing cos the same machine,connected to the same router and running Windows Vista via Bootcamp will connect to the net ALOT faster. For example, if I'm viewing videos on youtube with OSX, I have to wait every few seconds for the video to buffer, but on Vista, the buffering is way ahead of the video. Another example would be downloading files...say from rapidshare. The typical download speed I get on OSX would be around 5-10Kbps, but with Vista, I get at least 25Kbps.
I'm quite new to OSX, and still trying to learn my way around the operating system. It seems such a pity for a really great machine with a really great operating system to be let down by slow internet connection. I hope someone out there will be able to help me sort this out. Thanks in advance.

Great, happy that it "seems to speed up things ..." Why not run the SpeedTest and "know?"
I use IPNetTuner ($30, free 21 day trial).
http://www.sustworks.com/site/prodiptxoverview.html
"*Why is it Sometimes Necessary To Tune TCP/IP*?
TCP/IP is not controlled by any manufacturer and is designed to work on almost any kind of underlying network with widely varying characteristics.
To meet this challenge, the protocol designers made TCP adaptive. TCP is self monitoring and optimizes its own behavior to match the network environment.
*Why can't somebody just write a utility that analyzes my network and automatically selects the optimum settings?* Such a tool would be both useful and popular. The answer is they already have, it's called TCP/IP, but sometimes it needs a little help.
In most cases, TCP works remarkably well all by itself. Tuning is needed in those cases where TCP doesn't quite get it right because the the network behavior is outside the expected range. Typical problems include:
Asymmetric connections that are much faster downstream than upstream.
High performance connections with relatively long latency ..."

Help needed in sqlservers connection

Hi,
I have two database in different servers and i need to access one db object in another db. for ex, server1 (db1) and server2(db2(tableA,tableB) )
I will be writing a stored procedure in in db1 and i wanted to access the TableA's data of db2. i am aware of using the linked server. but i am, looking for alternate for linked server because i need to pass credentials at runtime to connect the server and
access the objects.
Ex:
Create Procedure Test(@server varchar(50),@username varchar(20), @pwd varchar(20))
as
Begin
select * from server2.db2.tableA;
End
the alternate i found is OpenQuery. not sure how should i accomplish using openquery and am not sure about the drawback of using this. please suggest me the best way to achieve this and if possible show me some sample.
Thanks in advance
loving dotnet

Hi ,
yes i could create proc on server2.
Thanks for your reply. I will not be using this mechanism often. also i am informed to use non linked server that's why i started to do the research. Finally i tried with open Rowset and i am able to acheive with concern. My concern is , i tried in my local
database and for just returning 4 rows it took 00:00:01 by means 1 second which is bad. because my table has only 4 rows. so to return 4 rows it should not take 1 second. any suggestion please
My code:
declare @sql nvarchar(max)
select @sql = 'select a.* from openrowset(''MSDASQL'', ''Driver={SQL SERVER}; Server=testserver;UID=sa; PWD=loginpwd;'', ''select * from [sample].dbo.Company'') as a'
exec sp_executeSQL @sql
any suggestion please
loving dotnet

Help Needed in establishing connection between Kepware OPC server and UDS 4

Hi All,
I am in the process of establishing connection between Kepware OPC server and UDS 4.0,
Can anyone guide me through the process of configuring UDS 4.0 to establish conection with the Kepware.
Any standard documentation on UDS 4.0 will be of great help.
Thanks in advance,
Shyam

HI Rajesh,
I am creating OPC DA instance and when i try to browse for the OPC servers available in the machine, the list is blank. i am not able to view any OPC servers.
Actuallt the Kepware OPC server and UDS are installed in the same machine.
Can you plz through some ligh on this
Regards,
SHyam

Trade show magic interactive help needed with adobe connect 8

Please see my website http://www.magicduncan.co.uk - I am a trade show magician as per my website and was wondering if this can be incorporated into my site to create a webinar presentation? Can I do screen sharing using adobe connect 8 as this is one of the things I am exploring for a live trade show magic show based around technology.
Can anyone recommend any indepth tutorials regarding how to tame this mammoth but amazing new tool from adobe?!
Many thanks for your help in advance.

Moved to InDesign forum.
When you export you will note that you export an Adobe PDF. There's a reason for that.
Mac Preview is fine for a plain vanilla PDF but it ends there.
Bob

Help needed for WiFi connection problem

Hello
My wife's iPad2 with current iOS 8.3 sometimes will not connect to Wi-Fi - any ideas on how to correct the problem?
It's inconsistent!
Thanks for any thoughts about this.
David

If you want to do this in sql you've to use dynamic sql to select only columns having the data.
And you can always use end user tools like SSRS to display only columns having values by using expression for visibility property.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
Visakh16-
Can you please help me on how can I achieve this using SSRS.
Thanks.
Hi Mutali,
Personally, I don't recommend using SSRS.
If you want to design a SSRS report,you should retireve all columns and specify column visibility for each column with following expression.
=IIF(Fields!SomeFieldValue.Value > 0, True, False) (Note:Supposing the data type of the field is INT).
You can refer to the solution as
Jingyang Li post above.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Help needed with internet connection

i just but 875p neo and every thing work until i tried connecting on the net driver is install corectly and installed the software of my internet provider and nothingtried everything and theres also 2.0 usb port that does not work can anyone help me,

Did you do a Clean install of your Operating System, or did you put the Hard drive in from another Motherboard?......Also It will help us to help you if you POST your Complete Sytem Specifacations (Create a Signature with your Forum Control Panel)....I ask this because it is hard to help if we only know what Motherboard you have ...........Sean REILLY875

Help needed on Bluetooth connection

Hey, is there a way to maintain bluetooth connection and check that the bluetooth connection is still active.

any help would be appreciated, thanks.

Help needed understanding this connection

I am trying to follow some previous written code to understand JDBC better. When i have previously connected to a database, i have created a connection and then called it up when needed. In this code i have found though, they seem to use somthing called a datasource?
public static Connection getXADBConnection() { Connection conn = null; DataSource ds = null; try { Object obj = lookup(MovieConstants.MOVIE_XA_DATASOURCE_NAME); ds = (DataSource) narrow(obj, DataSource.class); conn = ds.getConnection(); } catch (SQLException ex) { throw new DAORuntimeException(ex); } return conn; }
So is datasource a connection already provided?? If so, is it better to use a datasource or to register through a driver manager? Also, if its not too much to ask, i am struggling to understand the first two lines in the try loop, what exactly is this doing?
cheers

nick2price wrote:
...try loop...Unless that was a typo, I think you should put off learning JDBC for a while and start with the basics.
Start here:
[http://java.sun.com/docs/books/tutorial/]

Help Needed in AD Connection form Java Code

Hi,
I want to connect to AD target form my java program.
We are doing this as we don't want to use the OOTB Connectors.
How can any one connect to AD target from Java program?
After connecting,
How to Create a User in AD? Is there any API? Which one?
Regards,
SK

You'll want to do a search on JNDI and Java code. There are lots of sample code available on the web and tutorials. Here's a list of the classes you'll probably be using:
import javax.naming.CommunicationException;
import javax.naming.Context;
import javax.naming.NameNotFoundException;
import javax.naming.NamingEnumeration;
import javax.naming.NamingException;
import javax.naming.OperationNotSupportedException;
import javax.naming.directory.Attribute;
import javax.naming.directory.Attributes;
import javax.naming.directory.BasicAttribute;
import javax.naming.directory.BasicAttributes;
import javax.naming.directory.DirContext;
import javax.naming.directory.InitialDirContext;
import javax.naming.directory.ModificationItem;
import javax.naming.directory.SearchControls;
import javax.naming.directory.SearchResult;
-Kevin

Help needed Iphone 4 connection problems in windows 7

Device Manager in Windows 7 does not recognize iPhone 4 iOS 4.3.3 whether in normal mode or in recovery mode and not in DFU mode, but my second iPhone 4S is recognized immediately. I do not understand.

I would try another computer to verify if the iphones connector is damaged and thats why it dont connect

Unity Connection 8.X reports

Hello,
Does anyone know how I can run a report in UCCXN 8.X that will show how many messages are in a user's mailbox or how much disk space a user's mailbox is taking up? I've looked through all of the available reports and can't find anything that will give me this info. I'm running into a problem where my mailbox quotas are too low for some heavy VM users. I need to be able to find out which users are nearing the quota before they actually hit the quota.
Any help would be appreciated.
Thanks,
Glenn

Hey Glenn,
Just wanted to add my vote to this great suite of tools
Take a few minutes and go through the Tool Help section in the link Jeff
included. CUDD is fantastic and you will find you use it all the time.
There are many other helpful tools for Unity Connection that we can't
live without;
Audiotext Manager for Connection
http://www.ciscounitytools.com/Applications/CxN/ATM/ATM.html
Connection 8.0(1) Training Material
http://www.ciscounitytools.com/Training/Connection/CUC8_01.html
Port Status Remote Monitor for Connection (rPSM)
http://www.ciscounitytools.com/Applications/CxN/PortStatusMonitorCUC7x/PortStatusMonitorCUC7x.html
Cheers!
Rob

Cisco Unity Connection 8.6 Distribution list help.

We have a shared department line on several phones ( say 30 ) with VM and users were accessing the VM through the telephhone interface.
Recently we had a request from the leadership team ( say 5 ) , that they need unified messaging ( VM in their emails) for that department line.
How do i make it possible so that the leadership team has the unified messaging( VM in their emails ), while the other user still have access to the dept line VM through telephone interface.
If I create distribution list with the the leadership team as DL members and call handler for the dept line DN with message setting set to receipients as the distribution list , would that do it ? Will the other users still be able to access the VM through their phone. how do I make it possible .?

Indu,
I understand you requirement and I'll be upfront and say there are only so many options here as I see it and each has its own caveats/limitations. Here are a couple:
1. You will need an SMTP Smart Host configured for Unity Connection for this solution to work. The Smart Host is just an SMTP relay server and it needs to be configured to accept messages from and deliver messages to the SMTP domain of Unity Connection. That also means that you need to configure Unity Connection to allow inbound SMTP from this host (i.e., a trusted address configuration).
2. You will need an email distribution list or shared email address that you can forward a copy of voice messages for the mailbox to. That email distribution list needs to have your special users set as members.
3. Once the first 2 items are in place, go to the shared mailbox and set the Message Actions for Voicemail to "Accept and Relay" and then specify the relay address as the address for the distribution list you set up in item 2.
4. Leave the configuration for the shared mailbox the same except for the accept and relay configuration above. All users will continue to have the same phone-based functionality. The difference is that a COPY of every voicemail will be sent to the special users via the relay to distribution list. The caveat is that this is not Unified Messaging. It does get the voicemail into email but there is no synchronization of MWI and/or message status for users that rely on email client to check messages.
Another option would be an Integrated Messaging solution. This also is not Unified Messaging but does provide synchronziation between the shared line and email client; however, it requires that each of your special users set up an IMAP connection from their email client to the Unity Connection server. So, the messages will not be seen in their personal email inbox but rather in a separate IMAP folder in the email client.
Hailey
Please rate helpful posts!

Cisco Unity 4.2 to Unity Connection 8.5...patch needed?

Hello All,
I would like to upgrade my Unity 4.2 to Unity Connection 8.5....(the latest version) however, I'm unsure if I need to do any upgrades on my Unity server first before I run the COBRAS tool and export the data. Is this a direct upgrade or do I need to do any patching on the unity server?
I've tried to read through the Upgrade guides but, I'm having a hard time getting a direct answer.
Thanks for any and all help,
Dan

David has the correct answer there. But also, if you can, do not touch your existing 4.2 server. The last thing you want to do is repair a perfectly working Unity server because you wanted to patch it. You can install COBRAS on it to export the data no issues. If its a very large enviroment, Id even go as far as creating a DIRT backup of the Unity 4.2, and a new build of Unity 4.2 offline and DIRT restore so you can work with the data offline from the network. Some enterprises have crazy change controls and it may save you time in the end, even though it will take a little bit of time build the lab offline. If you havent used COBRAs, it will take you some time to get used to the import/export on what you want to do, how you want to do it, and how much time it will take to do the work. The Help files are extremely helpful, along with the Videos posted at ciscounitytools.com
May the force be with young Cobra importer/exporter

Help needed on Unity Connection

Similar Messages

Maybe you are looking for