Help Needed please: Phone won't power up...

Hello all. I am new here and I have a Nokia N96 which I purchased from Asia, so Nokia USA will not service my phone. I was updating firmware last night and everything froze. I patiently waited for around two hours before I disconnected the phone. Now the phone won’t power up. It vibrates a little and the light on the square control pad goes on. That’s about it. Screen and everything else is off. I tried what other people have suggested such as taking off the battery, pressing combination keys, etc. Any more suggestions or solutions for my problem. Thank you in advance for your kind assistance.

What you are thinking of doing will invalidate your warranty and as a result cannot be discussed here.
The only option available to you which won't invalidate your warranty is to send it to a Nokia Care Point which will fix it for you. Unfortunately, it will mean having to send it to Asia.
I know you have started multiple threads on this issue but telling you anymore then we already have will break the forum rules and be deleted by the moderators. You could however try asking the same question at some of the other unofficial boards.

Similar Messages

  • My iphone 3g is not charging and the middle button has stoped working please help. My phone has no power now

    My iphone 3g is not charging and the middle button has stoped working please help. My phone has no power now an i need help

    For a broken home button you can find your options here http://www.apple.com/support/service/

  • I recently had to restore my Iphone 4s and ever since I cannot double click the home button whilst the phone is locked and change my music. The controls come up and I can adjust the volume but I cannot change the songs. Help needed please!!

    I recently had to restore my Iphone 4s and ever since I cannot double click the home button whilst the phone is locked and change my music. The controls come up and I can adjust the volume but I cannot change the songs. Help needed please!!

    Have you guys been able to activate your iphone yet? I bought an iphone 4s from eBay and it worked fine, but the previous user had left some data on it, so last night I used the "erased all content and settings" to restore it to factory setting so I can start fresh and restore my backup. But now I'm stuck at the activation screen (I get the same "the activation server is temporarily unavailable")  and can't get it to activate, even if I use my old deactivated AT&T sim card (I'm on straighttalk now).
    I might try activating it with an active AT&T sim card from my fiancee's phone when she gets home, so I'll let you know how that works outs.
    If it's true that the server is down; anyone know when it will be back up again? Thanks in advance.
    iPhone 4s iOS 5.1.1 (9B206)
    Carrier AT&T 12.0
    Modem Firmware 2.0.12

  • Help needed please.. how do I remove my credit card from itunes? just discovered over $450 of charges when I looked at my email... Kids had no clue they were using our money and not their gift cards

    Help needed please.... I just discovered over $450 charges to my credit card from Itunes. The kids had no idea they were using our credit card and not their itunes gift cards and 4 year old just clicks on anything! I didnt save my credit card details so am a bit miffed at this... I cant find anywhere in itunes to remove it. Edit.. but not remove. Editing does not remove it.. HELP

    To Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact
    Accepted forms of payment  >  http://support.apple.com/kb/HT5552
    Changing Account Information  >  http://support.apple.com/kb/HT1918

  • Help needed please, with Iphone stuck with apple picture and progress bar after software update attempted

    Help needed please, everytime I try to update the software version on my iphone it comes up with a message saying it could not be completed and is now frozen with the apple picture and progress bar on it. Do I unplug it and hope the macbook pro sees it again, I also stupidly did not back up before starting the download which I realise I will have to go back to the previous back up. This keeps happening, everytime I do this type of update, I'm starting to think I should just give up on updating my software on the Iphone. I thought it was happening because I was using a window based computer to do the updates, this time I used my Macbook Pro. Please somebody help

    ljm17 wrote:
    ...This keeps happening, everytime I do this type of update, I...
    Then you should know what you need to do... If you don't remember...
    See Here  >  http://support.apple.com/kb/HT1808

  • HT4061 My iPhone prompted me to download the latest version of iOS7. I did, and now my phone won't power on. It just shows an iTunes icon on a black screen.

    My iPhone prompted me to download the latest version of iOS7. I did, and now my phone won't power on. It just shows an iTunes icon on a black screen. When I connect my phone to iTunes on my laptop, the only option it gives me is to restore my phone's factory settings. But won't this erase all my photos, contacts, etc? Any suggestions?

    It's in recovery mode. You don't have a choice. You have to restore the phone. Anything that was on it is already gone.
    If you've been backing up/syncing on a regular basis, you won't lose anything except what's changed since the last backup.

  • Cisco phones won't power up

    I have cisco 6945 phones connected to two Catalyst 6513-E switches in a VSS pair.
    This morning, 3 phones went offline on one of the blades on switch two (they went dark).
    When I do a show module, everything checks out fine --no errors on the blade. Diagnostics pass. If I connect a laptop to the ports having the issue, the system connects, fetches an IP and everything is fine. Tried different phones, cabled in directly, etc. -phones won't power.
    Here is the power info for the port(s) and blade/switch:
    sho power inline g2/2/15
    Interface Admin  Priority     Oper      Power(Watts)    Device             Class
                     (enabled )            From PS To PD
    Gi2/2/15  auto   low        off              0       0 n/a                   n/a
    Interface AdminPowerMax Police ActConsumption
                 (Watts)
    Gi2/2/15           30.0 off               n/a
    Interface: Gi2/2/15
    Inline Power Mode: auto
    Priority: low
    Operational status: off
    Device Detected: no
    Device Type: n/a
    IEEE Class: n/a
    Discovery mechanism used/configured: Ieee and Cisco
    Police: off
    Power Allocated
    Admin Value: 30.0
    Power drawn from the source: 0
    Power available to the device: 0
    Actual consumption
    Measured at the port: n/a
    Maximum Power drawn by the device since powered on: 2.6
    Absent Counter: 0
    Over Current Counter: 0
    Short Current Counter: 0
    Invalid Signature Counter: 0
    Power Denied Counter: 0
    UIC-DIST6513-02#sho power switch 2
    Switch Number: 2
    system power redundancy mode = redundant
    system power total =     3795.12 Watts (90.36 Amps @ 42V)
    system power used =      2560.74 Watts (60.97 Amps @ 42V)
    system power available = 1234.38 Watts (29.39 Amps @ 42V)
                            Power-Capacity PS-Fan Output Oper
    PS   Type               Watts   A @42V Status Status State
    1    WS-CAC-4000W-US    3795.12 90.36  OK     OK     on
    2    WS-CAC-4000W-US    3795.12 90.36  OK     OK     on
    3    none
    4    none
                            Pwr-Allocated  Oper
    Fan  Type               Watts   A @42V State
    1    WS-C6513-E-FAN      375.06  8.93  OK
                            Pwr-Requested  Pwr-Allocated  Admin Oper
    Slot Card-Type          Watts   A @42V Watts   A @42V State State
    1    WS-X6148E-GE-45AT   112.56  2.68   112.56  2.68  on    on
    2    WS-X6148E-GE-45AT   112.56  2.68   112.56  2.68  on    on
    3    WS-X6148E-GE-45AT   112.56  2.68   112.56  2.68  on    on
    4    WS-X6148E-GE-45AT   112.56  2.68   112.56  2.68  on    on
    5    WS-X6148E-GE-45AT   112.56  2.68   112.56  2.68  on    on
    6    WS-X6148E-GE-45AT   112.56  2.68   112.56  2.68  on    on
    7    VS-SUP2T-10G        435.54 10.37   435.54 10.37  on    on
    8    (Redundant Sup)       -     -      435.54 10.37  -     -
                            Inline         Inline         Inline         Inline
                            Pwr-Requested  Pwr-Allocated  Local-Pwr-Pool Power
    Slot Card-Type          Watts   A @42V Watts   A @42V Watts   A @42V Status
    1    WS-F6K-48-AT          3.78  0.09     4.20  0.10    34.44  0.82  On
    2    WS-F6K-48-AT         80.64  1.92    88.20  2.10    34.44  0.82  On
    3    WS-F6K-48-AT         91.98  2.19   100.80  2.40    34.44  0.82  On
    4    WS-F6K-48-AT         88.20  2.10    96.60  2.30    34.44  0.82  On
    5    WS-F6K-48-AT         76.86  1.83    42.00  1.00    34.44  0.82  On
    6    WS-F6K-48-AT         91.98  2.19   100.80  2.40    34.44  0.82  On
    system auxiliary power mode = off
    system auxiliary power redundancy operationally = non-redundant
    system primary connector power limit =   10920.00 Watts (260.00 Amps @ 42V)
    system auxiliary connector power limit = 10500.00 Watts (250.00 Amps @ 42V)
    system primary power used =              2560.74 Watts (60.97 Amps @ 42V)
    system auxiliary power used =            0 Watt
                            Inline         Inline-Pwr     Inline-Pwr     VDB
                            Pwr-Limit      Used-Thru-Pri  Used-Thru-Aux  Aux-Pwr
    Slot Card-Type          Watts   A @42V Watts   A @42V Watts   A @42V Capable
    1    WS-F6K-48-AT       1066.80 25.40    38.64  0.92     -     -     Yes
    2    WS-F6K-48-AT       1066.80 25.40   122.64  2.92     -     -     Yes
    3    WS-F6K-48-AT       1066.80 25.40   135.24  3.22     -     -     Yes
    4    WS-F6K-48-AT       1066.80 25.40   131.04  3.12     -     -     Yes
    5    WS-F6K-48-AT       1066.80 25.40    76.44  1.82     -     -     Yes
    6    WS-F6K-48-AT       1066.80 25.40   135.24  3.22     -     -     Yes
    Totals:                                 639.24 15.22     -     -
    What could be happening here?

    Just want to put it out there that I am no "expert" on what a 61XX line card can/can't do.  
    Can you try to run a TDR on the line?  
    1.  Command:  test cable tdr interface g2/2/15;
    2.  Wait for 61 seconds for the test to run; 
    3.  Command:  sh  cable tdr interface g2/2/15; and
    4.  Post the output to #3.  
    NOTE:  Yes, it takes 61 seconds to run a TDR on a chassis-based system.

  • HT4623 Phone won't power on.

    My phone won't power on. I tried holding down the power & home button for minutes at a time.  Tried charging with multiple charges from multiple outlets and sources. The apple advice is telling me to upgrade the software on my phone.  How am I supposed to do this if the phone won't turn on?  Am I missing something here?

    If the iPhone doesn't power on when connected to multiple different chargers and computers and using different USB cables, the iPhone has a hardware problem.

  • My phone won't power up after updating please help

    My phone will not power up after updating...it's been three hours...please help

    Hey laurelletoo,
    Welcome to Apple Support Communities.
    From what I gather, there’s an issue turning your iPhone 5 on after updating it. Take a look at the article below and try running through the suggestions that it provides.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    Take care,
    -Jason

  • Can I recover data if my phone won't power up?

    So my iphone 6 accidentally went through the wash on Monday night. I immeadately tried to dry it out in a pyrex dish of rice with a heating pad covering the dish. It was in rice for 36 hours and still won't power back up. I knew it was a long shot, but it previously worked for a iphone 3s and 4g. Any suggestions on possibly recovering this hardware or how to recover the data (no icloud storage) w/o the abilty to power the device on?

    Not really - that data is gone unless the phone somehow wakes up
    The conventional wisdom for the rice is 5-7 days though

  • New Hard drive, can't access certain aspects. Help needed please

    Hi everyone.
    I have an HP Pavilion dv6-6052ea laptop.
    I've been having problems with the hard drive so got a new one installed.
    My main issues are since getting it back, I can't access any of the original HP installations etc (I've downloaded all the drivers I know about through HP).
    The 2 main things I'm missing are 2 things that came with the laptop.
    1: Beats Audio sound system 
    2: Video Graphics: AMD Radeon HD 6490M (1 GB DDR5)
    and I have no idea how to get them back. Can anyone help. Do I need to install specific drivers? I can't find any trace that they exist on my laptop now apart from the stickers on the laptop! Any help is greatly appreciated. 
    I never had any CD back ups for the laptop. I do have the old HP back up etc saved on a USB but I don't know enough about the folders and files to know what I need to look for. (I still have the old hardrive.)
    Again, any help is massively appreciated. Thank you!
    Tony 

    If you used your HP Recovery Media, all factory install drivers and software would have been installed. If you didn't create your HP Recovery Media when you first setup your computer, please contact official HP support in your region / country, via the HP Worldwide Support Portal, to see if HP Recovery Media is available for your computer.
    If a generic Windows 7 installation disc was used, you will need to install all HP specific driver for your computer. Please try IDT High-Definition (HD) Audio Driver, Intel High-Definition (HD) Graphics Driver, and AMD High-Definition Graphics Driver to resolve your missing drivers issues. Windows 7 64-bit driver for your computer can be found on the HP Pavilion dv6-6052ea Entertainment Notebook PC Drivers page.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Help! Macbook Pro won't power up!

    Hi, I have a new 2011 MBP 15" (1.5 months old).
    When its up and running it works fine, and I'm able to shut down and restart it normally. As soon as I leave it off for more than a few hours (usually this happens overnight when I shut down the computer before going to bed)
    The next morning the computer won't power up at all. When I press the power button I can hear something whirring/spinning and then 3-5 secs later the power just cuts off. The screen doesn't even light up, I don't get to hear the apple chime at all. Repeated attempts to power up the system get this same result.
    I suspected it was due to cold weather (winter in Perth now). I find that every cold morning if i warmed up my macbook placing it near the heater, it will be able to boot normally after it has warmed up. But if ever the machine gets a chance to cool down, it goes into a coma? This happens when I put the mac to sleep and am away from it for more than an hour, it won't wake up!
    This is so dissapointing to come from a product that comes at such a premium price. I hope I can get some help on this! It's really really frustrating.
    I am reset the PRAM and SMC several times and they dont seem to do the trick. I ran the apple hardware tests, even in extended mode and they all detect no problems. Hellpppp

    How cold is cold where your MBP is? In any case take it to an Apple store or AASP. If none availanle call AppleCare.

  • Help needed: 1 phone comes up, 1+ go down

    Hi all
    We have a strange phenomenon going on at on one of our sites. What happens is this: we connect a few phones to the network and more or less at the same time the same number or more go down elsewhere on the floor with the 'Ethernet Disconnected' message displayed. There is no pattern to this, the phones that drop off are seemingly random.
    It's not a power issue as the phones don't actually power down they just appear to lose their network connection.
    It can't be DHCP as my understanding of DHCP is not compatible with this behaviour.
    I would find it hard to believe its congestion as it's a 1Gb LAN and WAN with around 200 phones.
    Initial thoughts are bad cabling but I've experienced poor cabling before and never seen something like this.
    Any suggestions from the community?
    Many thanks

    Hello Aman
    Thanks for your swift reply. Unfortunately we cannot run a debug as it's a production box. I have checked power and that doesn't appear to be the issue as all output related to power is showing as sufficient power available. I could be wrong so would welcome any clues to look for in the output that I may have missed.
    I only say it's not power related because the phones don't power down, they just lose network connectivity.
    Thanks again and I look forward to more helpful suggestions.
    Cheers

  • HELP NEEDED PLEASE

    Hi everyone
    Programming help needed here. Any advice would be greatly appreciated!!!
    I have been assigned some work for a program called Processing 1.0 availale at http://processing.org/download
    I was give the 9 individual programs I needed to make however they were converted to Java files from .pde files. The program is based on Java but only runs .pde files and NOTHING else!
    I decompiled the files and got the source code, but it is a slight variation of the original someone made in processing, and needs some tidying to get it to run.
    I think the programs are very simple for a programmer, although I AM NOT.
    CODE is BELOW
    // Decompiled by DJ v3.10.10.93 Copyright 2007 Atanas Neshkov Date: 02/05/2009 13:15:00
    // Home Page: http://members.fortunecity.com/neshkov/dj.html http://www.neshkov.com/dj.html - Check often for new version!
    // Decompiler options: packimports(3)
    // Source File Name: Assign2_1.java
    import processing.core.PApplet;
    public class Assign2_1 extends PApplet
    public Assign2_1()
    SquareSide = 20;
    Rank = Nums.length;
    Side = SquareSide * Rank;
    Green = color(0, 255, 0);
    Yellow = color(255, 255, 0);
    BG = Yellow;
    public void setup()
    size(Side, Side);
    background(BG);
    fill(Green);
    for(int i = 0; i < Rank; i++)
    rect(i * SquareSide, 0.0F, SquareSide, SquareSide * Nums);
    public static void main(String args[])
    PApplet.main(new String[] {
    "--bgcolor=#ece9d8", "Assign2_1"
    int Nums[] = {
    6, 14, 8, 9, 2, 3, 4, 2, 8, 3,
    9, 2, 0, 5
    int SquareSide;
    int Rank;
    int Side;
    int Green;
    int Yellow;
    int BG;
    Edited by: chevy1 on May 2, 2009 7:32 AM

    HELP NEEDED PLEASEShouting is a good way ensure you don't get help. Also you should give a meaningful subject.
    Any advice would be greatly appreciated!!!I suggest you ask a question after providing enough information to be able to answer it.
    Also use CODE tags when posting code as it make the code more readable.
    We are more likely to help people who are trying to learn Java rather than someone who might be looking for an easy way out of doing an assignment.

  • ITunes corrupt file message - urgent help needed please

    I have an iPod video 30GB, i downloded the latest iTunes & Quicktime version, and updated my iPod also to the latest update. When i connect my iPod and start downloading music from the library in iTunes, the iPod keeps on disconnecting and restarting by itself, and i get a message that the file iTunes.exe is corrupt. I tried Apple support and did all what they said by downloading the latest updates and versions, and also did the Chkdsk utility on Windows, but still it did not work, the iPod keep on restarting and i cannot download anything on it, i had it now for a week and did not use it at all because of this problem, can somebody with a technical background help me please, i use Windows XP.

    I have an iPod video 30GB, i downloded the latest iTunes & Quicktime version, and updated my iPod also to the latest update. When i connect my iPod and start downloading music from the library in iTunes, the iPod keeps on disconnecting and restarting by itself, and i get a message that the file iTunes.exe is corrupt. I tried Apple support and did all what they said by downloading the latest updates and versions, and also did the Chkdsk utility on Windows, but still it did not work, the iPod keep on restarting and i cannot download anything on it, i had it now for a week and did not use it at all because of this problem, can somebody with a technical background help me please, i use Windows XP.

Maybe you are looking for