Help needed pls!!! GF4 Ti4800 SE 8X on MSI 845 Ultra?
Hi folks,
I just purchased a GF4 Ti4800 SE 128mb 8X.
I own a MSI 845 Ultra ARU (6398), I understand this board only supports up to 4X AGP, but the GF4 card should be able to "downgrade" to work with a 4x motherboard, I hope.
Booting up is ok, but graphics start to tear on the window start-up screen. At the desktop, once i click the mouse, the desktop will hang like for 1 sec, then the monitor switch to Black screen, and then back desktop, this repeats when i click the mouse. There are also some weird colors here and there.
Can anyone pls advise?
Quote
Originally posted by wonkanoby
serious vga card,is your psu in the same bracket
Hi there, thanks for ur prompt reply :D
hmm, sorry i don't realli what you mean by "psu in the same bracket"?
My PSU is a HEC 475W.
Similar Messages
-
Help with motherboard MSI 845 Ultra-C
Hello, I have a problem with this motherboard:
When I connect something in the PCi slot, Windows recognize there are something there, but i can´t install it because it can't recognize the drivers. I tried to change the slot, I have installed the last drivers of the motherboard and there is no way to use the PCIs slot. All the things I have tried, works perfectly in another computer, i have the original drivers and they have work time ago. If anyone can help i'll very very pleased. Thank you!
edit: I have made a clear CMOS and it doesn't work
Forgive muy English, but i`m spanish.
In Spanish:
Buenas tengo un problema con mis puertos PCIs de una placa MSI 845 Ultra-C.
Cuando conecto algo a un puerto PCI (en concreto una tarjeta avermedia con sus drivers de casa, una tarjeta de red Realtek con sus drivers y otra tarjeta de red conceptronic c100i probadas en otros ordenadores y va perfecto) windows me dice q se a detectado un dispositivo pero nunca puede llegar a localizarlos, y ya creo q no es de los drivers. Sabeis de que puede ser?
Ya he probado a quitarlo y ponerlo en todos los puertos cada cosa por separado, han funcionado en este pc alguna vez tambien y ahora no van. Muchas gracias por su ayuda
Edito: Tambien he actualizado la placa base con los ultimos drivers q existianQuote from: Frankenputer on 25-January-08, 06:34:20
Would you please post what is in your system, including the Power Supply (manufacturer, multiple +12V rails or single +12v rail, and the amps on the +12V rail(s)). Please include the full specifications of your system(including the operating system). Look at my signature below to get some idea of what we'd like to know.
INTEL Pentium 4 1.6Ghz
256 MG DDR ram KINGSTON, 1 SLOT
motherboard MSI 845 Ultra-C VER:1
power supply: HipoMedia, model:ATX-250PCC12,
AC INPUT: 115VAC 7A 60Hz 230 VAC 4A 50 Hz
DC OUTPUT: +12V 13A 250W MAX
-12V 0.5A 250W MAX
NVIDIA GEFORCE MX400 VGA BIOS
HD: SEAGATE 40GB 7000rpp
DVD- LG 4120B
network card: conceptronic c100i
Avermedia AVerTV 103
windows XP Proffesional: including all sp2 updates.
I have already tried with windows XP Home Edition, windows 2000 Proffesional and Windows 98 Second Edition.
This is the information i know, if you need more, the audio is from the motherboard. Thank you again! -
Need power spec for System Fan Header MSI K9N4 Ultra-F
I need the power spec for Fan Header MSI K9N4 Ultra-F motherboard
I want to use a Panoflow 2.13 Watt fan on the cpu heatsink. Will this
fan burn out the header? I don't have the board yet (it's in the mail - really)
so I can't use MSI Tech Support (I don't have the serial # yet).
thanks
TomanaForgot to add fan headers can take at least 6W/0.50A fans.
-
Urgent help needed pls regarding LOGO
hello friends this is sudhakar . i really need help
pls urgent
i wrote scjp 5.0 certification in august and cleared succesfully
i got all certificates but for logo i have to send the mail which cost me around 620/- rupess to them. but,
can u any one tell how can v say to sun pupil tat i got all my cetificaties and i need the logo for my resume
i heard we can do with online in www.sun.com only so can u help me out pls it is urgent.....http://www.sun.com/training/certification/faq/index.html#logos
This part should be relevant to you -
All customers that reside outside US and Canada: Once you have successfully passed one of our Java platform exams, a certification kit will be mailed to you that includes a Sun Logo Agreement. Please sign the agreement and mail it back to the address supplied. Depending from which country you mail the agreement, it may take up to month for you to receive the logo. We are currently working to provide an online logo for our International customers.
This means you send the mail to them or wait for them to go online (which might mean months). -
Urgent help needs - pls help me
i have four group in my template.
each group have subtotal at the end of it's group.
after each group total, i need to display total (which is differance between current group and previous) right below of group total.
and this difference need to show from second group.
example -
Group 1 Year
A ( total amount for Group 1)
Group 2 Year
B ( total amount for Group 2 )
Total differance C (which is B - A )
Group 3 Year
D ( total amount for Group 3 )
Total differance E ( which is D - C)
Group 4 Year
F ( total amount for Group 4)
total difference G (which is F - E)
G G1
G G2
G 999.00E
G1
G 999.00
<?xdoxslt:set_variable($_XDOCTX,’px’,xdoxslt:get_variable($_XDOCTX, 'y'))?><?xdoxslt:set_variable($_XDOCTX,’y’,xdoxslt:get_variable($_XDOCTX, 'x'))?><?xdoxslt:set_variable($_XDOCTX,’x’,sum ($G1[(./FISCAL_YEAR=current()/FISCAL_YEAR)]/AMOUNT))?>
E
<?xdoxslt:set_variable($_XDOCTX,’py’,xdoxslt:get_variable($_XDOCTX, 'y'))?>
Val is
Px is <?xdoxslt:get_variable($_XDOCTX, 'px')?>
<?xdoxslt:get_variable($_XDOCTX, 'x')?>
<?xdoxslt:get_variable($_XDOCTX, 'y')?>
Diff is
<?xdofx:xdoxslt:get_variable($_XDOCTX, 'y')-xdoxslt:get_variable($_XDOCTX, 'px')?>E
E
above code does not give me subtraction.
in above code pls omit that --- http -- in code but mistake it display in post.
any help is greatly appreciated.
thanks.
Edited by: user6767417 on Apr 3, 2009 5:02 PMHi ,
thanksfor reply me.
your suggestion is working.
but now it gives me differance between two column of same group.
but i need differance between same column of differant group ?
ant kind of helpis greatly apprecidated.
thanks. -
I HAV A ZEN MICRO PROBLEM
WHAT IS IS
I CHARGE IT ALL NIGHT (VIA USB ON MY PC) & THIS MORNING THE BATT. IS DEAD SAYIN LOW BATT WHEN I PLUG IT OUT
ITS ONLY STAYIN ON WHEN ITS ON CHARGE ...
2
WHEN ITS PLUGED IN & I TURN THE ZEN ON IT ONLY GOES IN TO THE RECOVERY MENU & I CANT GET OUT OF IT NO MATTER HOW MUCH I TURN IT OFF OR ON
CUD SOME PLS HELP ME
PS IM FRM THE UK
CUD SOME ALSO GIVE ME A CUSTOMER SUPPORT NUMBER
THE UK NUMBER ON THE SITE DONT WORK WHEN I TRY 2 CALL IT 4 SOME REASON
THANKS IN ADVANCErobert,
If your player are using firmware version ..0, then slide the lock switch to lock position when charging. If you are using other firmware version, the player would need to be properly recognize by the computer first before it will start to charge properly.
It doesn't bode well if the player are stuck at the recovery mode. Have you try the cleanup option and then the reboot option.
Jason -
Opinions and help needed Pls.
I am seeking some opinion and help.
I need to setup and control both 9i and 10g databases using EM.
The 9i databases will also be DataGuarded . I have successfully tested this using 9i EM with a repository
and Intelligent Agents and the DataGuard Wizard to create logical standby databases. An interesting experience.
Now that our first 10g database is in development, I would like to control it in a similar fashion. It will 'go' production
in November and will also need to be DataGuarded.
I am aware that each 10g Instance can have it's 'own' web interface, but to use the Dataguard wizard, I will need to use Grid control.
Q1. Can someone confirm or refute that Grid control, with it's own applicaton server & DB instance, is permitted
without ANY additional licenses at all, provided it is being used to control
other fully licensed EE databases only?
Q2. As 10gR1 Grid was the first release of the product, and we will be controlling 10gR2 databases (apparently patch 10.1.0.4 can do it),
do YOU think we should use 10.1.0.4 GC now,
or just use the 9i EM product and 10g Dataguard Broker command line tool 'DGMRGL' (not tested here yet), and wait for the 10gR2 GC hopefully early next year?
Below are all the processes that were started by installing 10G grid (10.1.0.3) in Solaris 64.
I will be attempting to apply the 10.1.0.4 EM Grid patch to this and controlling a 10.2.0.1 DB.
I have successfully connected to the Grid Control ("as is" installed 10.1.0.3) using netscape.
( initially using http://localhost:7780:em which automatically became http://dandrutl02:7780/em/console/logon/sdk/incompatible;jsessionid=c0a89b1fce6b5d53d63770647e38909ad251f1b02be.n65In79Pr6KKaxCNaN0McybtahyM-x4Qc2SLbhiIaN4Iah1vbA5zawSLa3mPn39AahqQb2SHbQnAnwb5pBfzqB1Molbzhk5Imkrzqx0In65In79Pr6KKawaLaxiKc3uPbxeM8OexhOaOgzX5hgbynknvrkLOlQzNp65In0__ ) Click ok a few times.....
Eventually I get to "http://dandrutl02:7780/em/console/logon/logon" and can login OK.
I have successfully installed an agent for 10g GC on a remote host, and can control it from the Grid host. It could control
a 9.2.0.7 instance on the remote host. 10.2.0.1 is also installed on the remote host but no Db has been created yet.
Now, can someone tell me the commands I need, - and the correct order - to:
Q3. Stop all Grid Web, application server, database, and local agent processes on the Grid host.
Q4. Start-up of same.
Q5. Start and stop of processes for the Grid Agent on the Remote agent host.
Q6. What is the preference for the installation order of the 10g Agent and Oracle 10gR2 software ?
Grid master processes
============
/data/oracle/product/10.1.0.4EM/opmn/bin/opmn -d
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
ora_qmn0_REPOS10
/data/oracle/product/10.1.0.4EM/jdk/bin/java -Xmx256m -Doracle.ias.sysmgmt.logg
/data/oracle/product/10.1.0.4EM/bin/tnslsnr LISTENER -inherit
ora_dbw0_REPOS10
ora_lgwr_REPOS10
ora_pmon_REPOS10
ora_reco_REPOS10
/data/oracle/product/10.1.0.4EM/opmn/bin/opmn -d
ora_smon_REPOS10
ora_cjq0_REPOS10
ora_ckpt_REPOS10
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
/data/oracle/product/10.1.0.4EM/jdk/bin/java -server -Djava.security.policy=/da
/data/oracle/product/10.1.0.4EM/webcache/bin/webcached -A -OPMN -U 1250885641
/bin/sh -c /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/rotatelogs /data/o
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/rotatelogs /data/oracle/produ
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/rotatelogs /data/oracle/produ
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
/bin/sh -c /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/rotatelogs /data/o
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/rotatelogs /data/oracle/produ
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
/data/oracle/product/10.1.0.4EM/jdk/bin/java -server -Xnoclassgc -Xmx256m -DORA
/data/oracle/product/10.1.0.4EM/perl/bin/perl /data/oracle/product/10.1.0.4EM/b
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
/data/oracle/product/10.1.0.4EM/bin/emagent
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
/data/oracle/product/10.1.0.4EM/jdk/bin/java -server -Djava.security.policy=/da
oracleREPOS10 (LOCAL=NO)
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
ora_j000_REPOS10
ora_j001_REPOS10
ora_j002_REPOS10
ora_j003_REPOS10
ora_j004_REPOS10
ora_j005_REPOS10
/bin/sh /data/oracle/product/9.2.0.6/bin/dbsnmpwd
/opt/local/sbin/sshd
/data/oracle/product/9.2.0.6/bin/dbsnmp
oracleREPOS10 (LOCAL=NO)
oracleREPOS10 (LOCAL=NO)
oracleREPOS10 (LOCAL=NO)
oracleREPOS10 (LOCAL=NO)
oracleREPOS10 (LOCAL=NO)
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
oracleREPOS10 (LOCAL=NO)
-ksh
oracleREPOS10 (LOCAL=NO)
/data/oracle/product/agent/bin/emagent
oracleREPOS10 (LOCAL=NO)
oracleREPOS10 (LOCAL=NO)
/data/oracle/product/agent/perl/bin/perl /data/oracle/product/agent/bin/emwd.pl
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
/data/oracle/product/10.1.0.4EM/webcache/bin/webcached -OPMN -U 1250885643
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
/data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
oracleREPOS10 (LOCAL=NO)
ora_j006_REPOS10
oracleREPOS10 (LOCAL=NO)
oracleREPOS10 (LOCAL=NO)
Grid AGENT host processes
==========
/data/oracle/product/10.1.0.4EM/bin/emagent
/data/oracle/product/9.2.0.6/bin/tnslsnr LISTENER -inherit
-ksh
/data/oracle/product/10.1.0.4EM/perl/bin/perl /data/oracle/product/10.1.0.4EM/b
/opt/local/sbin/sshdThank you for the reply, it go me working. Now some additional info and questions.
On a monitored host were I have both 9.2 and 10.2 databases installed, I was attempting to use just the 10.2 listener and the 10.1.0.4 agent to monitor everything. This worked.
I Installed 9.2 , 10.2 and 10.1.0.4 Agent software and started a 10.2 listener and 10.1.0.4 agent on a second Unix host.
But, when I attempted to set up a 9.2 DataGuarded logical databases to the second host, it failed and as far as I can tell it seems to be expecting that I will use a 9.2 listener for 9.2 DB's and a 10.2 listener for 10.2 Db's. (The errors were related to attempting to execute lsnrctl commands against wrong listener version).
Can someone confirm that Oracle expects that you will use multiple listeners (on different ports of course)?
I have also had some odd behavior from the 10g Grid application, only corrected by ending the session and restarting, but I am assuming that this is because Grid is still a relatively new product.
For clarity, I list the order of installation below. Can someone check that I have done it right?
host 1
Install 9.2.0.1 software.
Install Patches to same to get to our production level (9.2.0.4)
Install several patches related to EM and CritialPatchUpdates etc.
(as an aside, EM 9.2.0.6 with a management repository will control the above fine)
Install 10.2.0.1 software
Created a 9.2 and 10.2 test DB's.
Configure 10.2 listener for all Db's
host 2
Install 9.2.0.1 software.
Install Patches to same to get to our production level (9.2.0.4)
Install several patches related to EM and CritialPatchUpdates etc.
(as an aside, EM 9.2.0.6 with a management repository will control the above fine)
Install 10.2.0.1 software
management host
Install 10.1.0.3 grid control to new database
(Installes AS , creates a 9.0.? Db for the repository, Agent etc)
Install 10.1.0.4 grid patch to grid home
Install 10.1.0.4 grid patch to agent home
host 1
Install 10.1.0.3 grid agent
Install 10.1.0.4 patch to agent
host 2
Install 10.1.0.3 grid agent
Install 10.1.0.4 patch to agent
Whew! And Oracle thinks this is easy?
I am seriously considering using 9.2 EM and OMS for the DataGuard on 9.2 Db's only and 10G's database broker command line interface for the 10.2 stuff and banning use of 10g Grid control 10.1.
I Need a 10gGrid control 2.01 more stable, reliable, simpler, NOW.
Migrating a 9.2 OMS and repository to 10g Grid when it becomes usable will need to be possible.
You thoughts? -
Contract Analysis Report - Help needed pls.
Hi Gurus,
I have below requirement.
To analyze the contracts created in purchasing(in SAP). The report shall help to analyse the Contracts that are due to expire in next 12 months.
Now I need a suitable datasource and business content ods/cube.
Required characters are: Contract no, Vendor, Purchasing group, created on,start date,end date etc.
Report to run for contract end date between today's date and next year. For ex if user is running report on 05-oct-2007, the report should display all the contracts having end date between 05-oct-2007 and 04-oct-2008.
Please help me.
Thanks,
SasiHi
Take the <b>VBRK-KNUMV field and pass it to KONV-KNUMV</b> table field along with all the Condition types (KSCHL) fields to get the amounts (KBETR and KWERT) fields
Regards
Anji -
I pod touch question..help needed pls.
I have an I pod touch approx 3 yearws old. I have plugged it into my laptop and it says it it updated to the latest version.
When I try to download an app it tells me that I need to update it. Then I go into itunes and it tells me that there are no updates.
It is running 4.2.1 (8C148)
Any advice pls?You have an iPod Touch 2nd gen which can only go up to iOS 4.2.1 so you have the latest version for your iPod.
If you are trying to download Apps that require iOS 4.3 or later you will not be able to do so. -
Trouble Shooting Help needed on GF4 MX 440
I have a MSI - GF4 MX440 8x AGP which I am having troubles with.
When I try to play any 3D games they will start and run for a few seconds then crash back to the desktop. (specificaly Morrowind and Mafia I have not yet tried others) Any trouble shooting advice would be much appreciated. I have tried to re-install windows and put only the mobo, vid card drivers and the games on the system, but with the same results. Also the MSI Specs Page for the MX440 says that it "Supports Microsoft® DirectX® 8.0, 7.0, 6.0, and 5.0 (IDCT)" ... does that mean DX 9 is not supported?
System Specs:
Windows XP Pro
Epox 8RDA+ mobo (onboard sound and lan) www.epox.com
AMD Athlon XP 2600 333fsb
1 gig PC 2700 RAM
60 gig 7200 RPM Maxtor HD
Lite-on 40x12x48 CD-RW
3COM 10/100 Nic
Enermax EG365P-VE Power Supply http://www.enermax.com.tw/eg365p-ve-fma.htmThanks again for the help. Here are the IRQ Settings:
IRQ 00 Exclusive System timer
IRQ 01 Exclusive Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
IRQ 03 Exclusive Communications Port (COM2)
IRQ 04 Exclusive Communications Port (COM1)
IRQ 06 Exclusive Standard floppy disk controller
IRQ 08 Exclusive System CMOS/real time clock
IRQ 09 Shared Microsoft ACPI-Compliant System
IRQ 0A Exclusive MPU-401 Compatible MIDI Device
IRQ 0C Exclusive PS/2 Compatible Mouse
IRQ 0D Exclusive Numeric data processor
IRQ 13 Shared 3Com 3C900B-TPO Ethernet Adapter (Generic)
IRQ 13 Shared NVIDIA GeForce4 MX 440 with AGP8X
IRQ 14 Shared NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital)
IRQ 14 Shared Standard OpenHCD USB Host Controller
IRQ 15 Shared NVIDIA(R) nForce(TM) Audio Codec Interface
IRQ 15 Shared Standard Enhanced PCI to USB Host Controller
IRQ 15 Shared NVIDIA® nForce(TM) IDE Controller
IRQ 16 Shared NVIDIA nForce MCP Networking Adapter
IRQ 16 Shared Standard OpenHCD USB Host Controller -
Help needed pls!!!!
1.I have 2 schema a and b
2.I dont have priviledge to create procedure in schema a but i have in schema b.So I created procedure in schema b which will update the synonyms in schema a
3.Inside the procedure created under the schema b ? Can I use update a.<synonyn name>
where <> ;
Getting error : insufficient privilege to access object
Can I update another schema's object from another schema ?Yes! but what u need is the privillages granted by a. Since a is the owner of the object a must grant the privilleges on that synonym to b.
-
Terribly help needed pls.......
Hi
I have problem in implementing this banker's algorithm
Resource- Request algorithm
1.If Request <= Need[i][j] go to step2.
else raise ERROR condition process exceeded its maximum claim.
2.If Request[i]<= Available, go to step 3.
else Pi must wait since resources are not available.
3. Available := Available - Request[i];
Allocation += Request[i];
Need[i] -= Request[i];
If the resulting resource-allocation state is safe, the transaction is completed and process Pi is allocated resources. However if the new state is unsafe, then Pi must wait for Request[i] and the old resource-allocation state is restored.
Safety Algorithm:
1. Initalize Work := Availabe and Finish[i]:=false for i=1,2,....p
2.Find an i such that both a.) Finish[i] ==false b) Need[i] <= Work
If such i exists, go to step 4.
3. Work := Work + Allocation[i]
Finish[i] := true
go to step2
4 if Finish[i] == true for all i, then the system is in a safe state
My code is as follows --->
inal int r = 3, p = 5;
int[][] need = new int[p][r];
int[][] work = new int[1][r];
boolean[] finish = new boolean[p];
System.out.println( "Allocation");
System.out.println( "----------\n ");
int[][] allocation = {{0, 1, 0}, {3, 0, 2}, {3, 0, 2},{2, 1, 1},{0, 0, 2}};
System.out.println( "Max");
System.out.println( "----\n ");
int[][] max = {{7, 5, 3},{3, 2, 2},{9, 0, 2},{2, 2, 2},{4, 3, 3}};
System.out.println( "Available");
System.out.println( "---------\n ");
int[][] available = {{2, 3, 0}};
// initializing Work = Availabe
System.arraycopy(available, 0, work, 0, available.length);
System.out.println( "Need");
System.out.println( "----\n ");
for(int i = 0; i < allocation.length; i++){
for(int j = 0; j < allocation.length; j++){
need[i][j] = max[i][j] - allocation[i][j];
System.out.println( "Request");
System.out.println( "-------\n ");
int[][] request = {{3, 3, 0}};
System.out.println( "Finish");
System.out.println( "-------\n ");
for(int i =0; i<p; i++){
finish[i] = false;
// Resource Request Algorithm starts here
for(int i=0; i < request.length;i++){
for(int j=0; j <request[i].length; j++){
if(request[0][j] > need[3][j]){
System.out.println(" Process has exceeded its maximum claim. ");
}//end if
else if(request[0][j] > available[0][j])
System.out.println("P"+i+" process must wait since the resources are not available.");
else{
available[0][j] = available[0][j] - request[0][j];
allocation[i][j] = available[0][j] + request[0][j];
need[i][j] = need[i][j] - request[0][j];
}//end else
// Safety Algorithm starts here
step2:
for(int m=0; m <= i; m++){
for(int n=0; n <= m; n++){
if(!(finish[i] == false && need[3][j] <= work[0][j])){
finish[i] = true;
System.out.println("The system is in safe state when process P3 request "
+ request[0][j] +" from resource "+ need[3][j]);
}//end if
else{
work[0][j] = work[0][j] + allocation[i][j];
finish[i] = true;
continue step2;
}// end else
} // end j for loop
}// end i for loopi'm getting wrong output.
when request exceed maximum its not in safe state.
But my code is printing its in safe stateHow about using a debugger or System.out.printlns to verify the internal values that led to this output? -
I can play music that is stored on my PC but not through the internet i.e. youtube?????
I have checked all hte speaker settings and it saying they are installed and working properly.
Anyone any ideas what that might be?Download K-Lite codec mega pack from:
http://www.filehippo.com/download_klite_mega_codec/
then do this:
Start > Programs > K-Lite Codec Pack > Configuration > Codec Tweak Tool
Then check the box next to [Registry] Fix non-working system sound
It should fix the problem
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-|| -
Help needed pls to set up Homehub 1.0
Hi, I am new to this forum and am hoping you guys can give me some help to set up a homehub 1.0 which I was given. Tried BT help without success so far.
I am trying to connect my desktop PC through an ethernet cable but can't get a connection. My current ISP is AOL (who weren't helpful and won't be my ISP much longer). I have downloaded the userguide which didn't help either. I do not have the installation disc. The idea of the router is to enable wireless setup of the Nintendo Wii at the same time as the PC which is at the moment connected via a Voyager modem.
Can anyone help please? Many thanks,it is not the end of the world for the old trusty wireless modem.
It is possible to install the original 'Speed Touch' software/firmware for the Home Hub 1.
AOL use to use Speedtouch modems (probably still do) and you can download the firmware from reputable sources.
if you google Javiser and select homeHubindex link (www.jarviser.co.uk/jarviser/homehubindex.htm) and select Loading Speedtouch firmware this will resolve your issues. Or click here
http://www.jarviser.co.uk/jarviser/hubunlocking.html
CG
CG Over An Out -
SQL Exception: Result Set Closed. Help Needed Pls...
Hi
I am trying to insert the name field into �TestNoName� table which is randomly retrieved from �UniqueName� table. I am getting SQL exception: result set closed. Please look at the given code and let me know what�s wrong with my code:
Also please guide me about entering unique (serial numbers) dynamically into
database using Java. I have to enter customer details into database at some time and some customers details after some time but the customers should be given serial numbers.
Thank you in advance!
Ravi
Here is the Code:
String query1 = "Select Name from Unique_Names";
String query2 = "SELECT Number, Name FROM TestNoName";
Statement stmt;
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
} catch(java.lang.ClassNotFoundException e) {
System.err.print("ClassNotFoundException: ");
System.err.println(e.getMessage());
try {
con = DriverManager.getConnection(url,"","");
System.out.println("Successfully Connected to Database");
stmt = con.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_UPDATABLE);
ResultSet rs = stmt.executeQuery(query1);
ResultSet rs2 = stmt.executeQuery(query2);
int count=0;
while (rs.next()) {
count++;
rs.beforeFirst();
for(int i = 0; i < 10; i++) {
int randomrow = random.nextInt(count)+ 1;
System.out.println(randomrow);
String Name2 = rs.getString("Name");
rs2.moveToInsertRow();
rs2.updateInt("Number",i);
rs2.updateString("Name",Name2);
rs2.insertRow();
System.out.println("Exececuted SQL Statement- Inserted One Record");
stmt.close();
con.close();
} catch(SQLException ex) {
System.err.println("SQLException: " + ex.getMessage());
}I am trying to insert the name field into
�TestNoName� table which is randomly retrieved from
�UniqueName� table. I am getting SQL exception:
result set closed. Please look at the given code and
let me know what�s wrong with my code: Post the actual exception, not some paraphrase of it. Oh, and let us know which line it actually refers to in the code.
Maybe you are looking for
-
I've tried reset, power down/power up and shutting down the program but this document just won't send. Not from my iPhone either! I've tried doing a copy all and pasting it but it comes out all weird! PLEASE HELP!
-
FWD: Re: - no subject (01IB7Q2B9LQW0098V8) -
The tech notes are now available on Forte's Home page at http://www.forte.com/. On the home page, select " technical information". From there, there is a selection of "technical notes". Before you can access it, you will need to call Forte's technica
-
I have optimise my system and have 16GB of ram and am only running lightroom, any ideas? I have re installed the program
-
Can I install Adobe Photoshop on my laptop and desktop using the same license?
Can I install Adobe Photoshop on my Laptop and Desktop using the same License? Thanks!
-
Wireless network card on an AMD64 laptop
Can someone point me in the right direction as far as reading up on getting and installing drivers for my amd laptops wireless card. The laptop dual boots into Windows XP and Solaris and so far I cant connect wirelessly when using solaris.