Help Needed..... Problems with Primary Key.

Hello all.
ive been trying to do this for a while but not luck, im after some advice on ive got a java program connected to mysql database and i want to create a copy of a table, then be able to delete records from the new table. it seems like you cannot update copied tables because it doesnt copy the primary keys because i get
SQLException: Result Set not updatable (referenced table has no primary keys)
is there a way around this?
heres what i have:
public void createTemporyTables(){
try{
Statement stmt5 = conn.createStatement();
int rows1 = stmt5.executeUpdate("CREATE TABLE tempAnimals SELECT * FROM animals");
Statement stmt6 = conn.createStatement();
int rows2 = stmt6.executeUpdate("CREATE TABLE tempAnimalsQuestions SELECT * FROM animalsquestions");
if (rows1 == 0){
System.out.println("Don't add any row!");
else{
System.out.println(rows1 + " row(s)affected.");
if (rows2 == 0){
System.out.println("Don't add any row!");
else{
System.out.println(rows2 + " row(s)affected.");
catch(Exception e)
System.out.println("SQLException: " + e.getMessage());
System.out.println("Method = createTemporyDatabase Error");
public void remove(){
try{
Statement stmt13 = conn.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_UPDATABLE);
ResultSet yesItems = stmt13.executeQuery("SELECT * FROM tempanimals WHERE Q5 =\"y\"");
Statement stmt14 = conn.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_UPDATABLE);
ResultSet yesQuestions = stmt14.executeQuery("SELECT * FROM tempanimalsquestions WHERE question = '5'");
while(yesItems.next())
yesItems.deleteRow();
while(yesQuestions.next())
yesQuestions.deleteRow();
catch(Exception e)
System.out.println("SQLException: " + e.getMessage());
System.out.println("Method = removeYes Error");
any help will be much appreciated..
Ben

Hi,
Your temperary table has no primary key. Mention primary key field, when creating temperary table. See below statement change primary key field according to you.
int rows1 = stmt5.executeUpdate("CREATE TABLE tempAnimals (primary key(animalid)) SELECT * FROM animals");
int rows2 = stmt6.executeUpdate("CREATE TABLE tempAnimalsQuestions (primary key(questionid)) SELECT * FROM animalsquestions");Regards,
Ram.

Similar Messages

  • Insert row with datapages/bc4j  problem with primary key

    Hi everybody,
    i tryed to insert a new row into a table with primary key (id) and therfore used a datapage, where there is a html-form and the data tag set attribute to get the data into the BC.
    I also want to use a sequence for the primary key and made a trigger to insert the key-value before insert. but in this case it doesnt work. I also tryed to get the sequence to the BC -Layer (so that i can set the PK in the View OBJ already) with a View Object but I dont know how.
    so what schould i do??
    thanxx
    Martin

    There's a know issue, when creating a record with blob, the blob content won't show until committing. The blob is added too late, which means you're in trouble with not-null fields...
    Sue, is this logged as a bug? And the dialog captions?
    K.

  • Problem with primary key field that needs updating on commit

    Taking on someone else's form and trying to tidy it up as it has no primary key on tha table.
    The only primary key i can apply is (invoice number, line number)
    This has to be displayed on the form as a provisional number when the user enters the form. So it need to show for example inv number 1000 with each line on the invoice being 1,2,3,4 etc.
    The form then has a linked table for the lines per invoice that inserts invnumber and line number into a seperate table on PRE INSERT trigger. This means that if they put on various lines i need to do a post.
    My problem comes because more than one person can use the form at the same time so user a will go into the form and see inv number 1000, user b will also see 1000. The original form was making these null and updating to correct number on commit but i wanted to add a primary key.
    Im jusat wodering the best way to do this as if user a does not save before user b. there is a potential for a lock to occur on the post. Also they must be updated to a new number if someone else saves before them

    either you create a sequence for this by create sequence command and populate the sequence value. but in this case if the form is cancelled the sequence is missed and the next sequence will appear. Another way to do is to generate the invoice number when the user press save button and then assign that value to text item. It is the best way to do. So the user will see invoice number only when they save and it happens in milli seconds so there is no question of overlapping invoice number.
    Hope this helps.

  • Problem with primary key violation in master-detail screens

    Hi,
    I found a problem/bug in master-detail screens in which the PK of the detail table consist of the PK of the master table and an additional column. E.g. a manually entered sequence 'in parent'.
    I will use the following simple scenario to explain the problem (it's easy to reproduce):
    PROJECT table
    # id (PK)
    * name
    PROJECT REQUIREMENTS table
    # prj_id (PK)
    # sequence_id (PK)
    * description
    Just create the BC EO, VO and AM and set both display properties of the prj_id attribute of the project requirements VO to hidden.
    Create a new screen in the application structure file in which you can select a project (table-form layout) and display the details (table layout) on the same page.
    With this basic setup you can generate the app to enter, update and delete projects and their requirements.
    The problem occurs if you have a project with a least 1 requirements stored in the database and you try to enter a second requirement with an existing sequence_id within the project. This is an use case in which a end-user enters wrong data.
    So assume we have in the database:
    prj_id sequence_id description
    ====== =========== ===========
    1 1 req1
    and the end-user enters (prj_id is entered automatically as it's not displayed):
    1 1 req2 >> user should have enterd sequence_id 2...
    Step 1. If you try to save an error will be displayed:
    JBO-25013: Too many objects match the primary key oracle.jbo.Key[227300 1 ].
    And the sequnece_id is emptied automatically.
    Step 2. So the end-user re-enters the sequence_id but fills in 2 now and saves.
    Another error is displayed: JBO-27014 sequence_id in AppModule is required
    How strange? Everything is filled in already.
    Step 3. If you just hit save again (without changing anything) you got a transaction completed successfully.
    I checked the logfiles and noticed an exception during after executing step 2.
    oracle.jbo.AttrValException: JBO-27014: Attribute SequenceId in AppModule.ProjectRequirementsView2 is required     at oracle.jbo.AttrValException.<init>(AttrValException.java)     at oracle.jbo.server.JboMandatoryAttributesValidator.validate(JboMandatoryAttributesValidator.java)     at oracle.jbo.server.EntityDefImpl.validate(EntityDefImpl.java:2051)     at oracle.jbo.server.EntityImpl.validateEntity(EntityImpl.java:1373)     at mypackage1.ProjectRequirementsImpl.validateEntity(JwTekeningnummerImpl.java:273)     at oracle.jbo.server.EntityImpl.validate(EntityImpl.java:1508)     at oracle.jbo.server.EntityImpl.validateChildren(EntityImpl.java:1232)     at oracle.jbo.server.EntityImpl.validateEntity(EntityImpl.java:1339)     at oracle.jbo.server.EntityImpl.validate(EntityImpl.java:1508)     at oracle.jbo.server.DBTransactionImpl.validate(DBTransactionImpl.java:3965)     at oracle.adf.model.bc4j.DCJboDataControl.validate(DCJboDataControl.java:967)     at oracle.adf.model.binding.DCBindingContainer.validateInputValues(DCBindingContainer.java:1683)     at oracle.jheadstart.view.adfuix.JhsInitModelListener.validateInputValues(JhsInitModelListener.java:193)     at oracle.jheadstart.view.adfuix.JhsInitModelListener._doModelUpdate(JhsInitModelListener.java:166)     at oracle.jheadstart.view.adfuix.JhsInitModelListener.eventStarted(JhsInitModelListener.java:92)     at oracle.cabo.servlet.AbstractPageBroker._fireUIXRequestEvent(Unknown Source)     at oracle.cabo.servlet.AbstractPageBroker.handleRequest(Unknown Source)     at oracle.cabo.servlet.ui.BaseUIPageBroker.handleRequest(Unknown Source)     at oracle.adf.controller.struts.actions.StrutsUixLifecycle$NonRenderingPageBroker.handleRequest(StrutsUixLifecycle.java:325)     at oracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown Source)     at oracle.adf.controller.struts.actions.StrutsUixLifecycle._runUixController(StrutsUixLifecycle.java:215)     at oracle.adf.controller.struts.actions.StrutsUixLifecycle.processUpdateModel(StrutsUixLifecycle.java:106)     at oracle.jheadstart.controller.strutsadf.action.JhsStrutsUixLifecycle.processUpdateModel(JhsStrutsUixLifecycle.java:140)     at oracle.adf.controller.struts.actions.DataAction.processUpdateModel(DataAction.java:317)     at oracle.jheadstart.controller.strutsadf.action.JhsDataAction.processUpdateModel(JhsDataAction.java:622)     at oracle.adf.controller.struts.actions.DataAction.processUpdateModel(DataAction.java:508)     at oracle.adf.controller.lifecycle.PageLifecycle.handleLifecycle(PageLifecycle.java:112)     at oracle.adf.controller.struts.actions.StrutsUixLifecycle.handleLifecycle(StrutsUixLifecycle.java:70)     at oracle.adf.controller.struts.actions.DataAction.handleLifecycle(DataAction.java:223)     at oracle.jheadstart.controller.strutsadf.action.JhsDataAction.handleLifecycle(JhsDataAction.java:389)     at oracle.adf.controller.struts.actions.DataAction.execute(DataAction.java:155)     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1485)     at oracle.jheadstart.controller.strutsadf.JhsActionServlet.process(JhsActionServlet.java:127)     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:527)     at javax.servlet.http.HttpServlet.service(HttpServlet.java:765)     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:239)     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:239)     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)     at oracle.jheadstart.controller.CharacterEncodingFilter.doFilter(CharacterEncodingFilter.java)     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:645)     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)     at java.lang.Thread.run(Thread.java:534)
    This also explains why I got a error message within the application at step 2, but not an expected error message!
    From the logfile I can see something is going wrong in the oracle.jbo.server.EntityImpl.validateEntity method.
    To get more insight what was goning on I overridden the validateEntity method in my VO Impl class:
    protected void validateEntity()
    System.out.println("MARCEL>> sequenceId=" + getSequenceId());
    System.out.println("MARCEL>> description=" + getDescription());
    super.validateEntity();
    In step 1 the validateEntity is not called.
    In step 2 the sequeceId = null (and description = reg2)
    I expected the sequeceId to be 2 now as I entered this. Furthermore if I look at the (JhsActionServlet) request parameters in the log, I can see that the value of the sequenceId was 2. I guess something is going wrong at this point in converting the request parametes to the EO.
    In step 3 the sequeceId = 2 (as expected)
    Note that I'm using the evaluation copy version of JHeadstart 10.1.2.
    If this was patched in any later build, could you please tell which changes I have to make to the JHS sources to solve this problem.
    Regards,
    Marcel

    Marcel,
    I cannot reproduce this in version 10.1.2.2. We did not "fix" this, although changes in the runtime might have fixed this "silently". I suggest you upgrade to 10.1.2.2 and see whether you still get the error.
    Steven Davelaar,
    JHeadstart Team.

  • UIX BC4J Problem with primary key

    Hello
    I use Business Components (Entity and Views) and the backend is a postgresql; it works with BC4J-JSP perfectly;
    i switched to use uix; but have strange problem:
    I have defined in the entity a create-Method to set the primary key of the current row to a defined value. If i test
    it in the component browser it works all; but when i switch to my application, i receive allways a "1" in the rendered field which should have the current primary key.
    Just to see if it works with Oracle right i tested also against Oracle 8.1.7! It works as it should.
    Has anybody an idea how i can solve the problem.

    Marcel,
    I cannot reproduce this in version 10.1.2.2. We did not "fix" this, although changes in the runtime might have fixed this "silently". I suggest you upgrade to 10.1.2.2 and see whether you still get the error.
    Steven Davelaar,
    JHeadstart Team.

  • Problem with primary key

    Hi,
    I have written this small code. When I try to create my enterprise bean with deploytool, I set container-managed persistant (2.0) but I can't see my primary key and Find/Select methods :
    Note that when I set container-managed persistant (1.0), I see my primary key but I can connect to ejb/Cloudscape in order to gen the sql commands. it complains about j2ee server running and UI and PW while everything look ok to me...
    Any ideas?
    TNX,
    SS
    Here is my small code :
    =================================================
    package Connect;
    import javax.ejb.*;
    import java.rmi.*;
    public interface ConnectEC extends EJBObject {
    public String getMessage() throws RemoteException;
    ====================================================
    package Connect;
    import javax.ejb.*;
    import java.rmi.*;
    public interface ConnectECHome extends EJBHome {
    public ConnectEC create(String message) throws CreateException, RemoteException;
    public ConnectEC findByPrimaryKey(String message) throws FinderException, RemoteException;
    ===================================================================
    package Connect;
    import javax.ejb.*;
    import java.rmi.*;
    public class ConnectECBean implements EntityBean {
    public String message;
    private EntityContext ctx;
    public String ejbCreate(String message) throws CreateException {
    this.message = message;
    return null;
    public String getMessage(){
    return this.message;
    private String setMessage(String message){
    return this.message = message;
    public void ejbActivate() {}
    public void ejbLoad() {}
    public void ejbPassivate() {}
    public void ejbPostCreate(String message) {}
    public void ejbRemove() throws RemoteException {}
    public void ejbStore() {}
    public void setEntityContext(EntityContext ctx) {}
    public void unsetEntityContext() {}

    in cmp 2.0, you must declare your bean class as abstract class, use setter/getter to access the fields like the following:
    package Connect;
    import javax.ejb.*;
    import java.rmi.*;
    public abstract class ConnectECBean implements EntityBean {
    private EntityContext ctx;
    //cmp fields
    public abstract String getMessage();
    public abstract void setMessage(String msg);
    public String ejbCreate(String message) throws CreateException {
    setMessage(message);
    return null;
    public void ejbActivate() {}
    public void ejbLoad() {}
    public void ejbPassivate() {}
    public void ejbPostCreate(String message) {}
    public void ejbRemove() throws RemoteException {}
    public void ejbStore() {}
    public void setEntityContext(EntityContext ctx) {}
    public void unsetEntityContext() {}

  • Basic Help Needed - Problems with Cells

    I have created a table that is only 1 column wide and 2 rows
    high, I have put text in the top cell and an image in the bottom.
    The cell padding and spacing are both set to "0"
    In Dreamweaver the image is directly underneath the text with
    no gap - which is how I want it; however when I view through a
    browser i.e. Firefox or Explorer, the cells are stretched in height
    so that there is a massive gap.
    Does anyone know what exactly is happening and how I can
    rectify it so that the browser shows what I see in
    Dreamweaver?

    Let's see your code, please.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Diamonkn" <[email protected]> wrote in
    message
    news:fvhoiv$s4p$[email protected]..
    >I have created a table that is only 1 column wide and 2
    rows high, I have
    >put
    > text in the top cell and an image in the bottom. The
    cell padding and
    > spacing
    > are both set to "0"
    >
    > In Dreamweaver the image is directly underneath the text
    with no gap -
    > which
    > is how I want it; however when I view through a browser
    i.e. Firefox or
    > Explorer, the cells are stretched in height so that
    there is a massive
    > gap.
    >
    > Does anyone know what exactly is happening and how I can
    rectify it so
    > that
    > the browser shows what I see in Dreamweaver?
    >

  • TS4040 I assumed this would help my problem with not being able to open apps like Preview or TextEdit since I installed Mountain Lion. Instead, first I'm prompted to enter a password, then once I do that, I get an error box telling me the Library needs re

    I assumed this would help my problem with not being able to open apps like Preview or TextEdit since I installed Mountain Lion. Instead, first I'm prompted to enter a password, then once I do that, I get an error box telling me the Library needs repairing. So I click on Repair, and once again I'm prompted for a password, which I enter, then the same error box opens, and so it goes. Can anyone help me with this problem? I'd greatly appreciate it.
    Thor

    Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Step 1 should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary, and if everything is working as expected after step 1.
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Do I need to Create Primary Key Class for Entity beans with Local interface

    Do I need to Create Primary Key Class for Entity beans with Local interface?
    I have created my entity bean with the wizard in Sun One Studio and it does not create a primary key class for you.
    I thought that the primary key class was required. My key is made up of only one field.
    Anyone know the answer.
    Jim

    u dont need to create a primary key class for a entity bean.if ur table's primary key feild(int ,float) is a built in or primitive data type,then u dont need one.But if ur table has a primary key field which is non primitive (for example StudentID,ItemID etc)then u have to create a primary key class.
    hope this helps :-)

  • Another user has changed the row with primary key oracle.jbo.Key   HELP

    I created VO which based on two entities. Then user search from that VO, when result comes update two row of each entity .
    HERE my function
    public String lockPayment() {
    getAppImpl().getcheckPaymentsVO1().setRangeSize(-1);
    Row[] rw2 = getAppImpl().getcheckPaymentsVO1().getAllRowsInRange();
    checkPaymentsVORowImpl tparow;
    tparow = null;
    for (int j = 0; j < rw2.length; j++) {
    tparow = (checkPaymentsVORowImpl)rw2[j];
    // tparow.setApayLock("1");
    tparow.setAtaxLock("1");
    BindingContainer bindings = getBindings();
    OperationBinding operationBinding = bindings.getOperationBinding("Commit");
    Object result = operationBinding.execute();
    if (!operationBinding.getErrors().isEmpty()) {
    return null;
    return null;
    When I click it gives me error:
    ----------> Another user has changed the row with primary key oracle.jbo.Key
    Any suggestion !!!!!!
    Edited by: 903927 on Dec 14, 2012 1:00 AM

    Hi,
    see this: https://blogs.oracle.com/onesizedoesntfitall/entry/the_case_of_the_phantom
    Frank

  • Updateable columns with primary key

    Hi,
    I use HTML DB 2.0 and 10g R1.
    With HTML DB i would like create an application with 2 pages.
    The first page is an report from a table with 2 columns, the first column is datatype number(10) with primary key and the second column is varchar2(255).
    The report should looks like with an edit-icon for all rows and both columns with header.
    My problem is, the report has only 2 columns, not 3 columns and the edit-icon is together with the first table column, the header name is Edit.
    What can I do ?
    The second page should be a form linked from the first page for update, insert and delete rows. It's not possible to use a sequence on column with pk for new inserts.
    I don't know, which sample application has the same content or what I have to do.
    Who can help me ?

    Simply create an application "Report and Form" based on your table and modify it as follows:
    - On the report page, modify the query to include the PK column a second time (using an alias)... if this was based on the EMP table with EMPNO being the PK, the query then looks like this (modification bold):
    select
    "EMPNO",
    "EMPNO" as "EMPPLOYEE NUMBER",
    "ENAME",
    "JOB",
    "MGR",
    "HIREDATE",
    "SAL",
    "COMM",
    "DEPTNO"
    from "EMP"
    where
    instr(upper("ENAME"),upper(nvl(:P1_REPORT_SEARCH,"ENAME"))) > 0 or
    instr(upper("JOB"),upper(nvl(:P1_REPORT_SEARCH,"JOB"))) > 0
    - In the report attributes, move the added column to the desired position (I moved it directly next to the edit link).
    - On the Form page, just change the item holding your PK column from "hidden" to "Text field".
    You may take a look at http://htmldb.oracle.com/pls/otn/f?p=PK_VISIBLE:1 to verify this is what you're looking for.
    Edit: Oops - I just recognized I cannot update the EMPNO on page 2 since the automated row processing depends on an unchanged PK. However - normally it isn't a good idea to update a PK anyway (since it might be used as FK in some other table(s)).
    It is possible to create new records with manually adding the new PK, so if this is really all you need, then I would suggest you modify your edit page displaying the PK column read-only when editing an existing row and updatable when adding a new record (using 2 items with conditional display, based on the PK being NULL or NOT NULL).
    Holger
    Message was edited by:
    schweich

  • Another user has changed the row with primary key -Table changed externally

    Hello,
    I am facing the error: "Another user has changed the row with primary key oracle.jbo.Key[94 ]." during the delete operation.
    User case scenario:
    1. Added new row in the table.
    2. Once new row is added to the the table, another application will update few columns in the newly added row based on some logic.
    3. On the same session I am trying to delete the newly added row and getting above mentioned error.
    I have added a "Button" in the table to partialRefresh the table to check the new values of the changed columns.
    I have checked the forum and found many similar errors and tried the following but nothing helped.
    1. By setting "Auto Refresh = True" for the view object.
    Issue faced-> It worked fine but after few add and remove my db is getting to inconsistent state after which, I am not able to do any add/delete from my page.
    Error: "Too many objects match the primary key oracle.jbo.Key". I have checked this and I am not getting this error when "Auto Refresh = False" even after multiple add and remove actions.
    2. By Setting "Auto Refresh" the iterator associated with the page.
    Issue -> Did not work at all.
    Looking forward inputs from gurus.
    Thanks
    Abhijeet

    Finally I found one solution to this problem at: [ http://www.avromroyfaderman.com/2008/05/bring-back-the-hobgoblin-dealing-with-rowinconsistentexception/|http://www.avromroyfaderman.com/2008/05/bring-back-the-hobgoblin-dealing-with-rowinconsistentexception/]
    Simply overriding the lock() method in the entity object resolved issue. Kudos to the author.
    Code:
    public void lock() {
    try {
    super.lock();
    } catch (RowInconsistentException e) {
    refresh(REFRESH_WITH_DB_ONLY_IF_UNCHANGED | REFRESH_CONTAINEES);
    super.lock();
    But, Now my refresh button is not working as depend on the "Auto Refresh = True" to update the table.
    Can anyone tell me how can I refresh the VO of my table from the button.
    Thanks
    Abhijeet.
    P.S: I have already added the partial trigger but it is work not working as the data is cached in the VO. Removing the Cached property for the VO is creating other problems.

  • Problems with fuction keys for brightness

    i have laptop hp 15 r006tx Product number: G8D30PA#ACJ 
    i have problems with functions keys for brightness , actually it does't works i can't actually adjust brightness, please help me.....................

    OK...
    I was right.  You have no graphics driver installed for the Intel HD graphics adapter.
    I am very surprised you were able to install the nVidia driver because usually you get an error that states you need to install the Intel graphics driver first.
    Once you install this driver, the Microsoft Basic Display adapter should be replaced by an Intel HD graphics adapter and you should be able to adjust the screen brightness.
    Make sure you have installed this Intel chipset driver first and reboot.  If you have done this already, you can skip this step.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130504-1&cc=us&dlc=en&lc=en...
    Next, install the Intel HD graphics driver and reboot.  This driver is for W8.1.  If you installed W8, you need a different graphics driver.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130257-1&cc=in&dlc=en&lc=en...

  • JBO-25014: Another user has changed the row with primary key...

    Hello,
    could you help me please with resolving this error "JBO-25014: Another user has changed the row with primary key..." - I am just getting a row from a view by bind "filter" variable, then I am assigning new values for some of the attributes - and trying to commit ..unsuccessfully..
    View is based on Entity.
    I saw directive for setting Entity's attributes as "update after insert / update" - but this did not help me.
    Thanks in advance.

    Hi
    Please try this solutions:
    One solution is to change the ADF BC locking behavior to optimistic instead of pessimistic. Choose the AM and click the Configuration context menu option. Select the LocalAM entry and go to the Properties. Scroll down to the locking setting and change the existing entry
    If there is a trigger changing values, you need to mark those attributes (the ones that may be changed) as refresh after insert and/or refresh after update in your Entity Object.

  • JBO-25014: Another user has changed the row with primary key oracle.jbo.Key

    Hi,
    I am developing a Fusion Web Application using Jdeveloper 11.1.2.1.0. I have a home.jspx page that has a ADF table built on efttBilling View Object. . When you click on one of the rows in the table, it will take you to detail.jspx where you can edit the row and save. When 'save' is clicked, stored procedures are executed to update/insert rows into few tables , and then go back to home.jspx where you need to see updated content for that row.
    To get down to the exact issue, updates are made to the tables on which the efttBilling View Object is built using a stored procedure. Once this is done, I am trying to requery view object to see new content. But I keep getting JBO-25014: Another user has changed the row with primary key oracle.jbo.Key error. Following are the approaches I followed to query new results:
    a. Executed Application Modules Commit Method. Created 'Commit' Action binding and tied it to homePageDef.xml. Called this binding from a view scope bean.
        BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
         OperationBinding operationBinding = bindings.getOperationBinding("Commit");
        Object result = operationBinding.execute();
       if (!operationBinding.getErrors().isEmpty())
        return null;
    b. Marked 'Refresh on Insert' , 'Refresh on Update', 'Change Indicator' checkboxes for all the attributes in the entities associated with efttBilling View Object.
    c. Tried to Requery View Object. Created a refreshViewObject method in Application Module Impl.java file, exposed this method to the client interface and created a invokeMethod Action binding in home.jspx
    Code in Application Module:
      public void refresheftTransactionsforBillingAccountViewObj1View()
        System.out.println("In eftTransactionsforBillingAccountViewObj1");
      findViewObject("eftTransactionsforBillingAccountViewObj1").executeQuery();
    Code in view scope bean
            DCBindingContainer bindings =
           (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
            OperationBinding operation =
            bindings.getOperationBinding("refresheftTransactionsforBillingAccountViewObj1View");
            operation.execute();
    I have searched web, ADF forums and tried methods suggested in there but no sucess.
    Could anyone please provide some insight in this issue. I have been battling with this since quite some time. I can provide you with the log file too.
    Thanks!
    Shai.

    What code does your Commit method have .. can you try using the Commit executable from the AM itself instead ?
    Also -
    Shai wrote:
    'Change Indicator' checkboxes for all the attributes in the entities associated with efttBilling View Object.
    which all attributes you set this property for . it should just be for History columns as such.
    Did you also check if this could be your scenario ?
    Decompiling ADF Binaries: Yet another reason for &quot;JBO-25014: Another user has changed the row with primary key orac…
    OR
    JBO-25014: Another user has changed the row with primary key oracle.jbo.Key
    OR
    Another user has changed the row with primary key -Table changed externally
    Message was edited by: SudiptoDesmukh

Maybe you are looking for