Help needed quick!!! How to download a management cockpit?

Hello all,
In three hours I have to give a presentation on a demo of a management cockpit I build. I would like to download the management cockpit and burn it on a cd so the participants can take it home.
How to download a management cockpit?
I know you can download a balanced scorecard so I hope this is possible.
Thanks in advance.
Ralph

Ralph,
You cannot download the CPM MC app as a offline application.The Balance scorecard can be downloaded into an offline application. The only thing thats possible is to use the print functionality of CPM MC.You can use this with the flag measure defination switched on and also set all the required exception settings(red,green,yellow..) and download all the walls,views and frames into a spool file.
Hope that helps..

Similar Messages

I need information of where download Solution Manager 3.2

Receive a warm greeting.
I need install Solution Manager but i have Oracle 9.2.0.7 and kernel 6.40, Solution 4.0 SR2 run with this release of database. If it is not thus, of where I can download Solution 3.2
Thanks

Hi,
I suggest u to search it the following Url to download Solution Manager 3.2 .
url : http://service.sap.com
https://websmp104.sap-ag.de/~SAPIDP/002006825000000234912001E
Regards,
Ramganesan K.

Laptop crashed. New. Need Quick Time Pro download

I have the registration from my purchase. Just need the Quicktime pro download link.
Any help?

I tried this... Downloaded the player 7. I input my registration key & it say's that it is invalid. My order number is: Order Number: W495082701. I ordered this on Aug 6th & had to get a new laptop last week.
What should I do now?

Help me remember how to download a powerpoint file to Keynote

Can someone remind me how to download a powerpoint file to Keynote?

Keynote is a Mac Application only, there is not a Windows version of Keynote.
I assumed you would realise this as you asked the question in a Mac discussion forum.
If you have further iPad questions, direct them to the correct forum where you will get a better responce here:
iWork for iOS discussion Groups

Urgent help needed! How do I use Time Machine to restore my System disc?

I need urgent help. First I discovered that my Library folder was empty. When I tried to restore the library to an earlier version via Timemachine it would not let me because it said the system was in use. Trying to start-up from another system on another internal drive and using various disc repairs resulted in the whole volume to disappear.
Question is how do I get the earlier system from my Timemachine backup drive? I have another Mac where I can attach the TIme machine HD to. Can I restore it from there and then copy the files over to my corrupted disc? All my programs are on there as well, which would take me days to re-install and then there are the other bits, emails, photos etc. Can anyone help?

lightandmagic wrote:
Thanks for your sympathy Pondini and the encouragement. You just reminded me that I will lose a whole working day restoring !!! Do you happen to know where the emails are kept on the system and the address book? I better nick those as well as my other life sustaining bits before its too late. I don't trust anything any more.
I don't know what you mean by "nick those." Time Machine will put everything back the way it was at the time of the backup (unless you'd excluded things).
Do you mean you want to restore things from the period after the backup you selected?
For Address Book or Apple Mail, start the application, then +Enter Time Machine,+ navigate to your latest backup, and you'll have a prompt to restore. For Mail, you can restore an entire mailbox. When you exit from TM, you'll see a new folder in your Mail sidebar with the restored items, so you can sift through them and move, delete, or leave them as you wish.
Other items, you'll have to locate and restore via the Finder > Time Machine.

Loops messed up. Help needed quickly

Hi there,
I'm in the middle of kind of an important project that has to be finished by next week and of course those are the times when software seems to fail So I need help quickly.
Situation: the location of my apple loops seems to be messed up. I placed the "Apple Loops for Soundtrack Pro" on an external disk (since it is the largest folder) and kept the rest on my internal drive. Now, when I search my loop browser, results seem to be incomplete. I know I had a lot more drum loops before I reorganized my loops than I have now.
So I became suspicious and as some kind of test I looked in the Library > Audio > Apple Loops > Jam Pack Symphony Orchestra folder, searched for a particular loop name (in this case "Adversary Strings"), typed it in the search menu of the loop browser in Logic and couldn't find it.
So I took al my loop folders in the "Apple Loops" map and dragged them back into Logic. It showed "Adding Loops" and after 10 seconds (which seemed rather short to me) this was done. I searched again "Adversary Strings" in the loop browers, still couldn't find it. So I dragged ONLY the "Adversary Strings" loop in the Logic Pro loop browser and then Logic gave me a message: "Logic already has this loop, do you want to replace it?"
But Logic doesn't have that loop! I can't find it, there's no filter on in my loop browser (I search "all loops") and I don't find some loops (it's not only the case with the "Adversary Strings") and when I want to add them I get the message that they're already in Logic...
So I deleted all my loop indexes, re-added the loops and still no results.
Any ideas out there to re-index these things correctly???
Thanks!

Hi,
thanks for the help, but as I said in my topic, I already followed the steps suggested in "Rebuilding the Loop index" (deleting my index and dragging the apple loops folder back in the browser) and of course I already searched the forum. My question was a little more specific, so I thought it deserved a new thread.
Eventually I solved it in a very strange manner, just by trial and error actually. When I added the whole loop folder, Logic couldn't find the loops (despite deleting the index and hoping for Logic to re-index the loops). But when I selected one loop out of a particular folder (for instance Jam Pack1) and added it, Logic added the loop, but this seemed to take a while. After that one loop was loaded, suddenly all the others that were in the same folder (Jam Pack1) were also visible again.
I did this for every different loop folder (5 jam packs, garage band, soundtrack pro and I life) and so got back all my loops...
Weird, but it worked
Thanks anyhow...
S.

Advice / Help needed on how to tackle this mountain...

First, I've scoured the forums looking for an answer and some clarity, but have come up empty. Any advice or help you can offer will be greatly appreciated...
So I'm trying to tackle the feat of sorting though thousands of MP3s in several different fodlers, and getting them all stored in one folder, with just the ones I want to keep (estimated to be about 3,000 when all said and done). Having iTunes just automatically copy them as I drag and drop is perfect, but I don't want the program to automatically sort them in hundreds of different folders. Is there a way to not completely turn this folder off, but have it just copy into the root folder?
Assuming the answer is no, what's the best way for me to approach this? Right now I've turned off the copy feature, have been adding 100 or so songs into a new playlist, editing the tags in iTunes, and copying into my finish root folder. However, I obviously lose my rating when I move the files, and have to update my library by removing all previous files in library, and adding the root folder again.
A way around this is for me to just not assign a rating to any files until I have my final root folder set for import into iTunes library, but this also raises a conceptual problem: I use other programs for uplaoding songs from CDs and DLing, and have them all sent to an "Unsorted MP3s" folder. I would like to be able to go back to this folder, edit the tags and clean them up, then copy them into the root folder and updating my library without having to remove all and reimport the whole folder, losing all my ratings and playcounts.
So I guess there's really 2 questions I have;
First, is there a way to have iTunes just copy the file into a root folder without automatically sorting and creating folders itself?
If no, what's the best way for me to go about updating, importing, and copying songs into a singular root folder? I realize I could just stay on top of it, and only add a few files at a time individually, but that solution isn't very feasible when I'd like to update and add large numbers at a time.
I gotta imagine there's something I'm missing here and it's possible. I did have the idea of merging ALL of my MP3s into my root folder first, then delete and edit from iTunes, eventually ending with a perfect library and all files in one folder. However, I'm still posed with the problem of how to add files at a later date without losing my whole library...
Hopefully I haven't been too confusing, and I'll be sure to offer more clarity if need be. Thanks in advance for all the help!
-Mike

Im not a 100% sure on what your trying to do, i think and correct me if im wrong but you want to copy all your songs that are scattered all over the pc into one folder in the root but not have itunes consolidate the files into folders by name etc.
Im not sure if this is of any help to you but i had songs scattered all over my pc and wanted to put them in a central folder and then share that folder accross multiple user accounts on the one pc (this could be the root if you wish i just chose shared music) if you follow the following link it explained what i did to put all my music in the one place. (I urge caution though as im not 100% certain if this is what you want to do, anyway hope it help)
http://discussions.apple.com/thread.jspa?threadID=608497&tstart=0

Help NeEDED. How to link to soap web service from objective c

Hello , HELP
I'm trying to connect to a SOAP based web service using objective C as my programming language. Although the little bit of information on the Apple Dev centre documents is should be straight forward, im struggling like **.
What im trying to do is connect via a small username and password text-box plus 'login' button from interface builder to
https://api.betfair.com/global/v3/BFGlobalService.wsdl and parameter called login.
then pass it my username and password from the interface text-boxes plus a few other standard set bits of information which are required.
in turn the soap request will pass back a session token which i need to store.
I've tried using WSMakestubs, which builds successfully the classes, but when calling them method nothing happens.

Hello Etresoft
Thanks again for coming back to me.. I would like to add that maybe on my first thread i wasn't as clear on what i was asking for, and also what avenues have have stepped down before asking for help.. Believe me i hate nothing more than not being able to resolve something myself. I'm currently reading 'another' programming in cocoa book by Arron Hillgrass, although he touches on the web service call to a Amazon web service example, he doesn't go into detail about how to actually do this.
So again thank you for trying to help me.. its greatly appreciated.
Ok back to the subject, and your response below.. I will try and be as informative as i can.
I'm want to create a application using the interface builder which has a username and password textfield plus a button called <login>..
On entering the username and password and pressing the login button, i was to send a request to the a .wdsl (SOAP) web service and login.! the webservice in return will send back a session token, which i need to store for further web service calls.
In xcode i have been trying now for 1 week..!!! and the more i read up on how to make the Soap request call the more i fail to understand if this is simple or complex.
* A bit more info if i may, on clicking the login button i need to send information to the below address as a soap type request.
https://api.betfair.com/global/v3/BFGlobalService.wsdl
i need to also tell the request the method name which is loginreq
and also i need to pass these parameters in the request.
username (from textfield)
password (from textfield)
productId = '82'
vendorsoftwareId = '0'
locationId = '0'
ipAddress = '0'
The stage I've got to is, I've used wsmakestubs and I've tried 'wdsl2objc' to create the classes required. I have then created a app controller class and a interface build app with the textfields and login button. I have then linked up the textfields and button to the nsobject appcontroller with a action ibaction loginreq etc. On build and go the app builds without error's but fails to do anything when i press the login button.. (more i think about this the more i think its either two things, one im not passing the parameters and two im not invoking the loginreq method from the class.)
I feel like im wading in treacle and getting nowhere fast.!
All i would like is for some help from someone to point me the correct direction..
Im thinking that with all the Soap web services out there in the WWW, this must now be a easy thing to do in xcode. Im starting to think im stupid..
Thanks again for you Help
Regards
Iain Smith
[email protected]

Workflow help needed, transitioning from iPhoto/iPhoto Library Manager

HI all, I am using latest Aperture, iPhoto, and 10.6.3 on lan connected macs and need some help setting up a workflow/libraries that represent some sanity amid the tens of thousands of photos that I have. Before getting Aperture3, i was using iPhoto and iPhoto Library Manager to work between an imac and an mbp; i would create a temp library to travel with on the mbp and then when I returned to the office I would merge the updated temp lib with the master lib housed on a huge external drive hanging off the imac. Using iPhoto Library Manager this is a lot of work and very slow indeed.
So with my new install of Aperture3, I am sure there is a better way, I just have not found a coherent tut that explains what I should be doing under these circumstances. I see that I can import iPhoto libraries, and that I can also use referenced files to get things into Aperture no matter where they are, or I can ??? Really confused on all the options.
Ideally, I think what we all want is a cloud like repository for all photos where users could check in and check out photos and have all the metadata preserved, but I guess they also want ice water down under, and haven't gotten that yet either.
Short of the above fairytale, what can I do? I do expect to have another mbp in the field soon, so that will be two machines/users that will need to pull things out of a master repository and check back in updated files as well as add new files to the collective.
Thoughts? Thx.
coocoo
Message was edited by: coocooforcocoapuffs

1) Import my one massive iPhoto Library into Aperture 3 - but do I use referenced or embedded options? Is there any advantage to leaving everything in iPhoto and just referencing from Aperture? Or do I get everything into Aperture and then just blow away iPhoto?
I see no reason to leave the files in iPhoto. If you agree you can do one of two things: either move them elsewhere and reference them or manage them in Aperture. Many folks recommend referencing them, but it's a choice only you can make.
I see no reason to continue with iPhoto.
2) In Aperture, I can export a set of projects from the main repository into a "traveling library", say when I take the MBP out on assignment,
Correct: File -> Export Project as New Library
and then when I return, I just import that library back and the updates I made on the road will get integrated with the whole again? If so, that's worth the price of admission!
Correct.
Regards
TD

Help needed: Search function for custom Repository Manager

Hi there,
i'm writing my own Repository Manager for EP 6.0 SP2 PL4.
I've serious problems getting the search function running. I'm using the 'new', Netweaver-based API.
I think, there are some general questions to answer:
- My Repository Manager exposes lots of custom
   properties to the system. I create the properties
   for example using following code:
   IProperty newProp = new StringSingleValueProperty(
     PropertyName.getPropertyName(
              "{}" + myAttName),
     myAttVal,                         PropertyFlags.constructFlags(
              true, false, true, false)
    Is there any convention for the propertie's name?
    I think it has to be written in lowercase only?
    Can I use ANY namespace I want instead of the
    empty default namespace? (For example:
- After indexing my resources (of course, containing my
   custom properties), the TREX-Monitoring screen for my
   index shows all my custom properties in the 'Document
   Properties' area, but all uppercase chars are escaped
   somewhat. Is this OK?
- Trying to use the index above to search for particular
   resources in my repository by my custom properties
   fails all the time ('no docs found...'); searching for
   any system property works fine. What's the reason?
- How can I force the (Property-) search uses my
   custom namespace-manager's methods
   isQueryPropertyNameUnderstood() and
   getQueryBuilder()
   to perform a 'pure' property search by the repository
   manager? It seems that the TREX always handles the
   queries by itself, because my methods are never called.
Thanx for you help,
Daniel

I created a new manager and copied the classes exactly from the "simple" example and I see similar behavior. Actually, when I do this, folders are recursively copied, but not files. Again, browsing and viewing of files work fine. Again, I am not seeing any unexpected exceptions.
The only thing that changed were the names and namespaces. Nothing else at all was changed.
This makes me think I am missing some configuration somewhere or there is something special about the example project that the wizards are not creating. The only difference I see in the project file is an additional nature (com.tssap.selena.cmf.PatternNature), but I am not sure that is relevant.
Wow, I am really stumped.
-Alex

Help needed on how to assign string value to variables in process designer

Hi,
I am using LC Workbench 8.0.1 version, I have a business requirement where in my form I have a dropdown box which contains two options i.e,
1. Accept
2. Decline
If the user selects Accept, I have to route the form to user some "x" or if the user selects Decline then the form should be routed to some user "y" .
To implement this I need to capture the user selected value which is a String.
can someone explain me how to reslove this..?
thanks and regards,
sudheer

I'm assuming you're using a xfaForm variable that points to an XDP in the repository to render your document.
In that case, you set the Form Data Mapping to point to that xfaForm variable in the User step.
When the user submits the form the xfaForm variable contains the data for the form in an XML format. You can have multiple routes that come out of your user step that will check a certain value in the xfaForm variable.
The xml data for you form will be located under the /process_data/xfaForm/data/datasets/data node.
You can use an xPath similar to /process_data/xfaForm/object/data/xdp/datasets/data/myNode/MyField
you can also use the // notation to do a full search within the data node if you're not sure of the structure:
/process_data/xfaForm/object/data/xdp/datasets/data//MyFieldValue
I hope this helps.
Jasmin

Help needed to upload and download

i know the client's path of a file and i want to design a web page in jsp to upload this file into server and also download a file from server to a client m/c(the client should not specify the path) Help me please by giving the code.

Hi,
You cannot directly upload a file from Client machine even if you know the exact harddisk location of the file. Java does not allow this. You either need to use one of the following:
1. Multipart Form Upload
2. Signed Applet to upload the file.
Mail us if you need more help.
Thanks and regards,
Pazhanikanthan. P

Help needed with Patch Deployment using Configuration Manager 2007

I am trying to figure out how to deploy many patches built into a Deployment Management and Deployment Packages. For the life of me I can not find with in the program where to push the packages out to A) a group of Client, or B) a single client for
testing.
Thank you for your input. I am in front of the console now pulling my hair out.
Again thank you

Jason,
I have been doing that for 2 day now, reading the book, and technet. This is why I came here in hopes someone could give me a better idea than what I can find else where.
Maybe someone has some ideas on a certain log file on the server or a desktop to get some ideas?
Thank you
Robert
Some links to step-by-step guides, should help you:
http://blogs.technet.com/b/configurationmgr/archive/2009/08/17/guide-to-software-updates-deployment-in-configuration-manager-2007.aspx
http://blogs.technet.com/b/configurationmgr/archive/2009/08/20/guide-to-software-updates-deployment-in-configuration-manager-2007-part-2.aspx
http://www.windows-noob.com/forums/index.php?/topic/1809-using-update-lists-when-deploying-monthly-updates/
http://www.windows-noob.com/forums/index.php?/topic/1115-managing-monthly-updates-in-sccm/
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)
Don,
Thank you for this info. Very much appreciated.
If anyone else has any good info, please post.
Thank you
Robert

Printing help needed quickly

I am trying to print out football tickets I purchased thru stubhub. In my e-mail I recieved a link to download the tickets. I can see the page needed to print showing my ticket.When I hit the print icon a box opens and says This document could not be printed.I hit ok. Then a second box opens and says There were no pages selected to print. I went back to try again and after hitting the printer icon I see under pages 1 was selected but I was unable to access it or change it. I need to download these tickets soon...Thank you for help resolving this issue...

What printer? What driver? What OS and Reader version?
Can you try to print as image?
The option is present under Advanced options in the print dialog.
Sometimes if you remove the printer driver and re-install it, you can
then print the pdf.

Help needed on how to set up Global Nav in Dreamweaver so that changes need to be made only once and will be reflected throughout the site.

Hi,
I've created a site with global navigation across the top (drop down menus) and some global buttons on the left side. Is there a way to code this type of global navigation in Dreamweaver so that people making changes to the site need only make them once (not on every page!) and have them reflected throughout the site? I'm using Dreamweaver MX to create the site.
Thanks to this forum I know that Server Side Includes is a way to handle this but I'd like to use Dreamweaver if possible.
Thanks!

As Murray suggested, templates are the way to go (though not really recommended for a fairly large site) - here's a link to some help docs to help you get started.
http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WScbb6b82af5544594822510a94ae8d65-7acda .html
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
Book: Ultimate CSS Reference
http://www.sitepoint.com/launch/005dfd4/3/133
http://twitter.com/nadiap

Help needed quick!!! How to download a management cockpit?

Similar Messages

Maybe you are looking for