Help Needed Recording A Dj Mix On Satellite C670

Does the Satellite C670 14P have a line in option through the mic/headphone sockets.
The problem is am trying to record a dj mix using a recording program but each time a recording is done it sounds like it is being recorded through the laptop speakers and not through the soundcard. I have my mixer plugged into the laptop using a phono to 2.5 jack lead I have both the mic and the headphone sockets but either make any difference to the sound.
Can someone please help me.

Thanks for replying.
On the desktop I had there was a mic/headphone and a third socket which was the line in which basically connected the phono from my mixer straight to the soundcard.
I will try the windows sound recorder I didnt know that option was there, I have been using sony sound forge as the recording program.
My mixer does not have a usb socket on it this is the lead I have been using http://www.amazon.co.uk/3-5mm-Phono-Stereo-Audio-Cable/dp/B000Q6LSVS the red and white plugs go into my mixer and the jack gets plugged into the laptop.

Similar Messages

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and preferences but no sound from mixer to iMac. Need help.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.

Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

Help Needed - My BB 8520 Curve has this message-CRTranRec::GetLinkedRecordID:Invalid linked record id while sychronisation using the desktop software

Hi!
Need some help with the same:
Help Needed - My BB 8520 Curve has this message-CRTranRec::GetLinkedRecordID:Invalid linked record id while sychronisation using the desktop software

Hi sameer197301 and welcome to the BlackBerry Support Community Forums!
To clarify, are you seeing this message displayed on your BlackBerry® smartphone or on your computer?
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Novice needs help: inconsistent recording volume ("flutter")?

Hello All,
I'm new to Audition and have been struggling with my recording quality: I'm on a newer dual core Toshiba Qosimio multimedia laptop running Win 7 (64bit) and using a standard desk mic. I read the faq and help files on recording but still remain baffled about this. I'd greatly appreciate some help:
When recording music in Audition (for example: one strum of a guitar chord), I get a kind of fluttering: I don't hear the whole continous chord's sound. There are subtle 'dropouts' of the sound (like it has inconsistent volume). Now, I'm new at this so I'm probably not using the correct terminology..so I posted a wav file to let you hear:
http://home.comcast.net/~samiri/director/trash/InconsistentAudio1.wav
When using this same mic in my older PIV laptop running Win XP, the record quality is fine. Also, when I downloaded Audacity (free audio program) I think I hear the same fluttering..so maybe there is some way I need to set the recording (input) preferences on this machine.
Thanks for any assistance you can offer.
[email protected]

Ah, I had a recent laptop with Connexant Smart Audio, but recently replaced it.
There is a separate Smart Audio Control Panel that I think is accessible elswhere from the Windows Control Panel. I found it almost totally incomprehensible, but seem to remember that there was a way of switching between two options, one simpler than the other.
I would also go into the advanced playback settings to see if there are "enhancements" there. Some of these may affect recording.
As I said before, the only approach with all of this is to find all the various audio contol panels, switch off any effects or enhancements and set all the default sample rates for record and playback to the rate you will be using. Note that the various audio control panels may or may not stay in sync, so it's as well to go round the loop(s) a few times. Do check there is nothing hidden in the "enhancements" area by making sure you scroll down all the options if there are more than just one or two. Note that the Windows audio Control Panel has to be closed and re-opened before you can trust what it says.
None of this is the fault of Audition, which just records what is fed to it. It is the fault of Microsoft that there is a broken sample rate converter in Windows 7 and whoever designed the Connexant audio gui does need to be re-educated, I think.
It would, of course, be very sensible to seek out an external decent usb or similar audio interface.

Basic Recording Help Needed!

I am recording a song that consists of 3 tracks total. I have cut out the parts that are not needed while maintaining the position of the remaining sections. How do I record a final mix that is only one track? Or, how do I burn these tracks to a disc? Basically, I have the recording and editing process done, but now I need to place the music on a disc, or at least have it all saved as one track.
THANKS!
LMZ

Well, I assume since you're in the Logic forum, you are using Logic on your project.
What you're talking about is called bouncing. This means creating a 2-track mixdown (one track for the left, one for the right). Fortunately, this is easy: just go to File and choose "bounce". From there a window will open giving you several options. If you choose to bounce as AIFF, you can take the resulting file and burn it as an audio CD in Toast or iTunes. Or better yet, you can choose "burn" which will put your smash hit directly on a disc.
See how easy that was? Now have a pancake.
macbook pro Mac OS X (10.4.9)

Recording help needed

recording help needed. I'm a beginner, imac, logic express and helix board 12 firewire.
I have recorded my daughter voice only ok, BUT when i import audio file to track 1 as backing track and my daughter is using headphones from the helixboard to sing to she does not record to track 2 when all in enabled.
Should her headphone come from the imac and not the helix board
Regards
Paul

Check the recording channel in the channel strip.
It must be set the same as the audio interface channel.
cheers
rob

Looking for help on how to start mixing ?

I have a two songs done and Iam starting to get how to record but thats all I know . I need help moving a head on mixing and putting it on CD Thanks

Take time to learn as much as you can about dynamic processing - especially compression. Also, listen to a few of your favorite CD's through your monitor speakers to get an idea how you may want your mixes to sound.
Take advantage of panning your instrumentation so that you have a wide mix as opposed to everything sounding straight in the middle.
Have fun!!

No stereo mix with Satellite T110

I bought a Satellite T110 (Win7). There's no Stereo Mix option with the recording devices. I marked show disabled and disconnected devices. I updated the conexant driver (4.98.16.61). Nothing helped. Still no stereo mix option. I tried connecting a male-male cord from headphones to line in - gave very bad quality.
please help!
Message was edited by: lelbd

As far as I know the chip does not include this and there is no way to upgrade this
PS: this has nothing to do how much the notebook cost there are many different notebooks on the market which costs a lot of money and dont support some features due to the different chip.... and there are a lot of notebooks you could get for favourable price and support Realtek sound chip.

Help needed : Extension manager cs6 not listing products

Help needed to Adobe extension manager cs6 to show all my cs6 products
I downloaded Extension manager from here Adobe - Exchange : Download the Adobe Extension Manager
My Computer windows xp 32bit
My Photosop version cs6
My Dreamweaver version cs6
I installed photoshop here : C:\Program Files\Adobe\Adobe Dreamweaver CS6
and my XManConfigfile
<?xml version="1.0" encoding="UTF-8"?>
<Configuration>
    <VariableForExMan>
        <Data key="$sharedextensionfolder">$shareddatafolder/Adobe/Dreamweaver CS6/$LOCALE/Configuration/Extensions</Data>
        <Data key="$dreamweaver">$installfolder</Data>
        <Data key="$dreamweaver/Configuration">$userdatafolder/Adobe/Dreamweaver CS6/$LOCALE/Configuration</Data>
        <Data key="$UserBinfolder">$userdatafolder/Adobe/Dreamweaver CS6/$LOCALE</Data>
        <Data key="NeedOperationNotification">true</Data>
        <Data key="QuitScript">dw.quitApplication()</Data>
        <Data key="SupportedInSuite">CS6</Data>
        <Data key="HostNameForCSXS">DRWV</Data>
        <Data key="ProductVersion">12.0</Data>
        <Data key="Bit">32</Data>
<Data key="DefaultLocale">en_US</Data>
</VariableForExMan>
</Configuration>
Extension manager installed here : C:\Program Files\Adobe\Adobe Extension Manager CS6
Photoshop Installed here: C:\Program Files\Adobe\Adobe Photoshop CS6
and my XManConfigfile
<?xml version="1.0" encoding="UTF-8"?>
<Configuration>
    <VariableForExMan>
        <Data key="EmStorePath">$SharedRibsDataFolder/Adobe/Extension Manager</Data>
        <Data key="$photoshopappfolder">$installfolder</Data>
        <Data key="$pluginsfolder">$photoshopappfolder/Plug-Ins</Data>
        <Data key="$presetsfolder">$photoshopappfolder/Presets</Data>
        <Data key="$platform">Win</Data>
        <Data key="$actions">$presetsfolder/Actions</Data>
        <Data key="$blackandwhite">$presetsfolder/Black and White</Data>
        <Data key="$brushes">$presetsfolder/Brushes</Data>
        <Data key="$channelmixer">$presetsfolder/Channel Mixer</Data>
        <Data key="$colorbooks">$presetsfolder/Color Books</Data>
        <Data key="$colorrange">$presetsfolder/Color Range</Data>
        <Data key="$colorswatches">$presetsfolder/Color Swatches</Data>
        <Data key="$contours">$presetsfolder/Contours</Data>
        <Data key="$curves">$presetsfolder/Curves</Data>
        <Data key="$customshapes">$presetsfolder/Custom Shapes</Data>
        <Data key="$duotones">$presetsfolder/Duotones</Data>
        <Data key="$exposure">$presetsfolder/Exposure</Data>
        <Data key="$gradients">$presetsfolder/Gradients</Data>
        <Data key="$huesat">$presetsfolder/Hue Sat</Data>
        <Data key="$imagestatistics">$presetsfolder/Image Statistics</Data>
        <Data key="$keyboardshortcuts">$presetsfolder/Keyboard Shortcuts</Data>
        <Data key="$layouts">$presetsfolder/Layouts</Data>
        <Data key="$lenscorrection">$presetsfolder/Lens Correction</Data>
        <Data key="$levels">$presetsfolder/Levels</Data>
        <Data key="$liquifymeshes">$presetsfolder/Liquify Meshes</Data>
        <Data key="$menucustomization">$presetsfolder/Menu Customization</Data>
        <Data key="$optimizedcolors">$presetsfolder/Optimized Colors</Data>
        <Data key="$optimizedoutputSettings">$presetsfolder/Optimized Output Settings</Data>
        <Data key="$optimizedsettings">$presetsfolder/Optimized Settings</Data>
        <Data key="$patterns">$presetsfolder/Patterns</Data>
        <Data key="$reducenoise">$presetsfolder/Reduce Noise</Data>
        <Data key="$replacecolor">$presetsfolder/Replace Color</Data>
        <Data key="$scripts">$presetsfolder/Scripts</Data>
        <Data key="$selectivecolor">$presetsfolder/Selective Color</Data>
        <Data key="$shadowhighlight">$presetsfolder/Shadow Highlight</Data>
        <Data key="$smartsharpen">$presetsfolder/Smart Sharpen</Data>
        <Data key="$styles">$presetsfolder/Styles</Data>
        <Data key="$textures">$presetsfolder/Textures</Data>
        <Data key="$tools">$presetsfolder/Tools</Data>
        <Data key="$variations">$presetsfolder/Variations</Data>
        <Data key="$webphotogallery">$presetsfolder/Web Photo Gallery</Data>
        <Data key="$workspaces">$presetsfolder/Workspaces</Data>
        <Data key="$zoomify">$presetsfolder/Zoomify</Data>
     <Data key="$hueandsaturation">$presetsfolder/Hue and Saturation</Data>
     <Data key="$lights">$presetsfolder/Lights</Data>
     <Data key="$materials">$presetsfolder/Materials</Data>
     <Data key="$meshes">$presetsfolder/Meshes</Data>
     <Data key="$rendersettings">$presetsfolder/Render Settings</Data>
     <Data key="$volumes">$presetsfolder/Volumes</Data>
     <Data key="$widgets">$presetsfolder/Widgets</Data>
        <Data key="$localesfolder">$photoshopappfolder/Locales</Data>
        <Data key="$additionalplugins">$localesfolder/$LOCALE/Additional Plug-ins</Data>
        <Data key="$additionalpresets">$localesfolder/$LOCALE/Additional Presets</Data>
        <Data key="$localeskeyboardshortcuts">$localesfolder/$LOCALE/Additional Presets/$platform/Keyboard Shortcuts</Data>
        <Data key="$localesmenucustomization">$localesfolder/$LOCALE/Additional Presets/$platform/Menu Customization</Data>
        <Data key="$localesworkspaces">$localesfolder/$LOCALE/Additional Presets/$platform/Workspaces</Data>
        <Data key="$automate">$pluginsfolder/Automate</Data>
        <Data key="$digimarc">$pluginsfolder/Digimarc</Data>
        <Data key="$displacementmaps">$pluginsfolder/Displacement Maps</Data>
        <Data key="$effects">$pluginsfolder/Effects</Data>
        <Data key="$extensions">$pluginsfolder/Extensions</Data>
        <Data key="$fileformats">$pluginsfolder/File Formats</Data>
        <Data key="$filters">$pluginsfolder/Filters</Data>
        <Data key="$imagestacks">$pluginsfolder/Image Stacks</Data>
        <Data key="$importexport">$pluginsfolder/Import-Export</Data>
        <Data key="$measurements">$pluginsfolder/Measurements</Data>
        <Data key="$panels">$pluginsfolder/Panels</Data>
        <Data key="$parser">$pluginsfolder/Parser</Data>
     <Data key="$3dengines">$pluginsfolder/3D Engines</Data>
        <Data key="$lightingstyles">$pluginsfolder/Filters/Lighting Styles</Data>
        <Data key="$matlab">$photoshopappfolder/MATLAB</Data>
        <Data key="UserExtensionFolder">$photoshopappfolder</Data>
        <Data key="$photoshop">$UserDataFolder/Adobe/Adobe Photoshop CS6/Configuration</Data>
        <Data key="DisplayName">Photoshop CS6 32</Data>
        <Data key="ProductName">Photoshop32</Data>
        <Data key="FamilyName">Photoshop</Data>
        <Data key="ProductVersion">13.0</Data>
        <Data key="IconPath">Configuration/PS_exman_24px.png</Data>
        <Data key="SupportedInSuite">CS6</Data>
        <Data key="HostNameForCSXS">PHSP</Data>
        <Data key="Bit">32</Data>
    </VariableForExMan>
</Configuration>
                                                                    Please someone help me i cant install any photoshop extension because of this issue,,,

Waiting for your reply ...thanks
Here is the results
I installed photoshopcs6 illustrator cs6 dreamweaver cs6 illustrator cs6 in the system , But nothing seems
Result: BridgeTalk Diagnostics
Info:
Name = estoolkit-3.8
Status = PUMPING
Path
Version = 2.0
Build = ES 4.2.12
Next serial number = 40
Logging: = OFF
Now = 15:55:49
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 55ms
Last pump = 62ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=0ms, left=16ms
Timeout = undefined
Handler = undefined
Instances: 3
estoolkit-3.8#dbg:
msg[15:55:49]: 00000035
@BT>Version = 2.05
Target = estoolkit-3.8#dbg
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:win3788
Timeout = 15:55:50
Type = Ignore
Response-Request = Timeout
Headers = (no headers)
Timestamp = 15:55:49
Serial-Number = 35
Received = undefined
Result = undefined
Error = undefined
Body = (empty)
Incoming: 1
Outgoing: 0
Handler: 9
ExtendScript = for all messages
Error = for only msg #25
Error = for only msg #27
Error = for only msg #31
Result = for only msg #35
Error = for only msg #35
Timeout = for only msg #35
Result = for only msg #37
Error = for only msg #37
estoolkit-3.8#estk:
msg[15:55:49]: 00000037
@BT>Version = 2.05
Target = estoolkit-3.8#estk
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:win3788
Timeout = 16:05:49
Type = Debug
Response-Request = Result Error
Headers = (no headers)
Timestamp = 15:55:49
Serial-Number = 37
Received = undefined
Result = undefined
Error = undefined
Body: 107 bytes
Text = <get-properties engine="main" object="$.global" exclude="undefined,builtin,prototype" all="true" max="20"/>
Incoming: 1
Outgoing: 0
Handler: 1
ExtendScript = for all messages
estoolkit-3.8: (main)
Incoming: 0
Outgoing: 0
Handler: 1
ExtendScript = for all messages
Targets: 1
Connector = PCD
Installed: 0
Running: 0
exman-6.0:
Path = C:\Program Files\Adobe\Adobe Extension Manager CS6\Adobe Extension Manager CS6.exe
Display Name = Adobe Extension Manager CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.exman
Status = (not running)
ExeName = Adobe Extension Manager CS6.exe
Installed: 1
Running: 0
Groups = (no groups defined)

Help needed to optimize the query

Help needed to optimize the query:
The requirement is to select the record with max eff_date from HIST_TBL and that max eff_date should be > = '01-Jan-2007'.
This is having high cost and taking around 15mins to execute.
Can anyone help to fine-tune this??
   SELECT c.H_SEC,
                c.S_PAID,
                c.H_PAID,
                table_c.EFF_DATE
   FROM    MTCH_TBL c
                LEFT OUTER JOIN
                   (SELECT b.SEC_ALIAS,
                           b.EFF_DATE,
                           b.INSTANCE
                      FROM HIST_TBL b
                     WHERE b.EFF_DATE =
                              (SELECT MAX (b2.EFF_DATE)
                                 FROM HIST_TBL b2
                                WHERE b.SEC_ALIAS = b2.SEC_ALIAS
                                      AND b.INSTANCE =
                                             b2.INSTANCE
                                      AND b2.EFF_DATE >= '01-Jan-2007')
                           OR b.EFF_DATE IS NULL) table_c
                ON table_c.SEC_ALIAS=c.H_SEC
                   AND table_c.INSTANCE = 100;

To start with, I would avoid scanning HIST_TBL twice.
Try this
select c.h_sec
     , c.s_paid
     , c.h_paid
     , table_c.eff_date
from mtch_tbl c
left
join (
          select sec_alias
               , eff_date
               , instance
            from (
                    select sec_alias
                         , eff_date
                         , instance
                         , max(eff_date) over(partition by sec_alias, instance) max_eff_date
                      from hist_tbl b
                     where eff_date >= to_date('01-jan-2007', 'dd-mon-yyyy')
                        or eff_date is null
           where eff_date = max_eff_date
              or eff_date is null
       ) table_c
    on table_c.sec_alias = c.h_sec
   and table_c.instance = 100;

Help Needed REP-1800 Formatter error VGS-1701 Not enough memory

Hi. Gents
Help needed
I’m working on a Report, it gets some 2 million records and the report pages are approximately 52,000
It works fine if the pages are lesser then 48,000 or the data is less let say one and half a million, the problem occurs only after 48000 + pages formatted.
Report is generated successfully when trying to go to the last page it throw an error.
REP-1800 Formatter error
VGS-1701 Not enough memory
I have already gone through the metalink DOC Id 95505.1 as well as OTN
But all in vain,
Any comments or help much appreciated.
Details are:
Reports 6i (Clients/Server) on Windows platform
(Windows XP Professional with SP 2)
Database: Oracle9i Enterprise Edition Release 9.2.0.5.0
Computer:
Pentium(R) 4, CPU 3.00GHz, 1 GB of RAM
Still 20 GB free space
Thanks & Regards

I don't see the point in making a report with more than 48,000 pages, I think Al Gore will not be happy when you start printing it...
The problem might be caused by the fact that Reports needs to format all output at once, and then even 1GB of memory will probably be not enough. Formatting all pages at once is needed if you use pagination with displaying total number of pages. If you have this, try to get that out of the report definition and try again.

Recording a DJ mix on Garageband...only able to record an hour?

Hi, I'm trying to record my latest mix but the track stops recording after just over one hour, Is there a way to extend record time, i'm making sure I have plenty of disk space, have 6gig spare and the current mixes of just over the hour are only 800Mb so far so this doesn't seem to be the problem, and I make sure all other programs are closed. I haven't found any other options so far, can anyone offer any advice? Thanks.
Also, I'm recording directly from my mixer, I take it I need to record the track as a 'real instrument' as opposed to the 'record as software instrument' option.

Is there a way to extend record time
http://www.bulletsandbones.com/GB/GBFAQ.html#recordlength
I take it I need to record the track as a 'real instrument'
yes
as opposed to the 'record as software instrument' option.
that would be physically impossible.

Record a DJ Mix in Logic

o.k., here i am, trying to record a dj mix. Normaly i would use my minidisc recorder and audio cd recorder to do so. Now i want to use my mac for it.
But how do you do it? I've read all the other topics about recording a dj mix but i must say, it doesn't work for me. I've read that for this purpose you have to use garageband. IN either Garageband or Logic there is no incomming signal. I've hooked 2 jacks from the master output from my mixer to my soundcard(Firewire solo)to the unbalanced inputs.
Let me tell you the gear i use: 2 Pioneer CDJ800, 1 Pioneer DJM500, Macbookpro (read below) M-Audio Firewire solo, Logic Pro 7.2.3
I've tried to searc for any incomming signal in my logic trackmixer, but can't find it. Which region do i use for this?
Help!
Lewis
Macbook Pro 2,16 Ghz intel Core 2 Duo Mac OS X (10.4.8) Logic express 7.2.3
Macbook Pro 2,16 Ghz intel Core 2 Duo Mac OS X (10.4.9) Logic Pro 7.2.3

you don't use a region. use an audio track. click on the R button on say audio track 1. check to make sure the inputs 1-2 correspond to your soundcard inputs and you should be able to hear the incoming signal/mix.
another point: have you selected the correct audio interface in Logic?
goto to the main audio menu>audio hardware and .......... (think that's the name) then make sure your m-audio solo is selected as the interface in the relevant dropdown menu.
hope that helps
rounik

Data uload to ODS ending up with an error. URGENT HELP NEEDED!!!!!!

Hi
My Sceniro is Full load from ODS1 to 5 other ODS. Iam uploading the data to other 5 ODS by selecting 1 ODS at a time.
Problem i am facing is upload is ending up with error mesg. Error Mesg are
<b>Error 8 when starting the extraction program - R3019
Error in Source System - RSM340
Req xxx in ODS2 must have QM ststus green before it is activated - RSM1110</b>
I have seen the the OSS notes for given error no, but they are not applicable to me. what could be the other possible solution.
In detail tab of the monitor i see red light at Extraction step and Subseq. processing.
Its quite urgent bcoz this error is occuring in Production system.
Plzzzz urgent help needed.
Thanks
Rohini
Message was edited by: Rohini Garg

rohini,
go to RSA1->Modeling->Source Systems and right-click on your BW system, and click on 'Replicate Datasources'.
also, go to the ODS that's causing the problem (via RSA1->InfoProvider and go to your ODS), right click and click on 'Generate Export Datasource'.
one more thing, make sure that all your record/s in the source ODS is active. if you're not sure manage its contents and click on 'Activate'. if there are any entries in the the next screen that comes up, you need to activate it first, then try everything again.
let me know what happens. also try to look for error messages in ST22 and SM21 that may be related to this and post whatever possible error you see there here.
ryan.

Help Needed - Even after lodging "Presidential Complaint"

Help needed please!!To make a long story short I have been through nothing but aggravation the past week trying to get my phone working. Service call on 7/6 to install Fios Internet, TV and phone. Internet and TV work fine, but Phone has no dial tone, going on a week and a half now. Tried contacting the account rep who set up my account, her supervisor as well as tech support on numerous occassions.
They set a dispatch for yesterday, and when the tech called me to say he was here, he was at an address i moved out of 4 years ago, in another state.I get a call from someone saying the service request was being closed and I need to call in with the correct address, after telling that rep I would not do that, that Verizon should make the updates based on my TV/Internet records, she hung up on me. Called back into Tech Support and the best they could do was an appointment for tomorrow. I then called the Corporate number and spoke with someone who opened a "Presidential Complaint" and requested an expedited call.. well i have heard nothing since then other than an automated call earlier today sayin my original service request will be kept. Needless to say I'm very upset that after a week and a half I still have no phone service and it doesn't seem like anyone is real willing to help me. I'm sure I'll get billed in full even though one of the 3 services I'm paying for hasn't been working in a week and a half..

Hi jkoen77,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

Help Needed Recording A Dj Mix On Satellite C670

Similar Messages

Maybe you are looking for