Help needed regarding Dates

Hi,
I want to have Date field in Pdf form as per the user settings in SU3 transaction.
How can i change the date field with scripting or through code initialisation and what to give for Display Pattern in Object Pallelete ?
Any inputs ?

It is not possible due to some technical reasons.

Similar Messages

Help needed regarding the updation of "Relationships" in BP

Hello Guys,
This is to request you to kindly help me regarding the following.
We have a scenario where all the employees assigned to an Organizational unit (in PPOMA_CRM) are not showing in the "Relationships" ("Has Employee")in the BP transaction of that Organizational Unit.
Could anyone let me know whether there is any update program that updates the "Relationships" from the Organizational asssignment. Or we need to enter the employees manually in BP "Relationships". Please help. Thanks in anticipation.
Regards,
Kishore.

Hi Amit,
Thanks alot for your reply. Its really helpful for me.
So,we usually enter these relationships manually only, right? Before going ahead with the custom program, could you please let me know whether there is any SAP note related to this.Once again thanks alot for you help.
Regards,
Kishore.

Help needed regarding replication in ds5.2sp4

Hi ,
I am new to ldap . I am able to establish replication between master and consumer and trying to update it is getting update but i am geting the following error
in error log
INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - Replication bind to consumer alpha.ad.com:19941 failed:
[16/May/2007:13:48:26 -0700] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - Failed to connect to replication consumer alpha.ad.com:19941
[16/May/2007:13:48:26 -0700] - ERROR<8318> - Repl. Transport - conn=-1 op=-1 msgId=-1 - [S] Bind failed with response: Failed to bind to remote (900).
Please help me regarding this .
Message was edited by:
ap7926

If data is getting replicated from master to consumer then the bind for that specific replication agreement is working.
Check your timestamps and current log entries. Are the "Failed to connect to replication" messages currently being generated? As long as your replication agreement is enabled the supplier will try to keep things up and running, retrying a failed consumer regularly (and generating about 1 set of log messaages per minute on my systems). So you'll get those messages on the supplier when a good consumer is down (the nsslapd directory server process that is).
If you don't have these messages being generated currently then this probably means that your consumer was down around "16/May/2007:13:48:26 -0700" but is ok now. In that case those messages aren't of big concern. They're just telling you that you had a problem, which you hopefully already knew about.
If replication is working (test by making a change on the supplier and checking it on the consumer) AND you're still concurrently getting these messages regularly then you have something interesting going on, probably due to a configuration issue. Without seeing the details it's difficult say what it would be.

HELP needed on Date

Hi there everyone, pls help me . i have a question as above
"Code a Java class called Calendar which has a static variable of type Date(initialised to 1st January 2004), a static void method called tock(int days) to advance the variable by the specified number of days, and a static Date method called getDate() to return the current date.".
What i was thinking to write is.
public class Calendar
Date myDate = new Date();
myDate = java.sql.Date.valueOf("2004-01-01"); //but my fren said i could use the toString() instead
public static void tock(int days)
 { int i = 1;
while i < days;
Date = Date + 1; // i am not sure what i am doing ...i am just a beginner .pls help
public static Date getDate()
{ return Date;
Are my answers correct ..? how do i advance the variable (date) by the number of specified days ? the asnwer need to print out, say 4 days , u need to print 01 Jan , 02Jan , 03 Jan , 04 Jan...
anyone please help ..

Since your assignment is to code a class named Calendar, I doubt that you can use the java.util.Calendar class,
which has a useful add() method in it.
So here is another solution:
public class Calendar
 static Date myDate = java.sql.Date.valueOf("2004-01-01");
 public static void tock(int days)
 long t = myDate.getTime(); // returns the number of milliseconds since 1970-01-01 00:00:00 GMT
 t = t + (days * 24 * 60 * 60 * 1000); // adds the appropriate number of days in milliseonds
 myDate.setTime(t);
 public static Date getDate()
 return myDate;

Help needed regarding Segment Qualifiers

Hi,
In my process of implementing Apps R12 afresh, we just created the segments and assigned them their flexfield qualifiers today. In that, the one assigned towards alancing segment shows the value qualifiers like that of natural accounting segment, unlike the bal. segment value qualifier.
I mean, when we try to insert a a value in the bal.segment it asks for qualifiers such as nature:expense/revenue/liability/asset, instead of going for the allow posting and allow budgeting alone. This is crazy, and I need your support.
Thanks,
Mukunthan L

Hi Amit,
Thanks alot for your reply. Its really helpful for me.
So,we usually enter these relationships manually only, right? Before going ahead with the custom program, could you please let me know whether there is any SAP note related to this.Once again thanks alot for you help.
Regards,
Kishore.

Help needed Regarding Project Server - 2013 Workflow

Hi All,
I am new to Project server 2013 Workflow, hence please help me regarding this. Pardon me if this question is too trivial.
I have created a project type associated with a workflow and my workflow is as follows :
So I am not doing anything here, I am just testing the workflow as mentioned by technet site : http://technet.microsoft.com/en-us/library/dn458865(v=office.15).aspx
But it is mentioned that, after a minute or 2, the workflow state will change, also they have mentioned to press the Submit button.
But in my case, the workflow is not moving to next stage [It just says 'The workflow is still processing - which never changes after hours] or I am getting the submit button (Submit button is disabled on the ribbon). Below is the state of my workflow :
PS : I have made the user added to Portfolio managers group as well. But still I am having this same issue.
The Workflow manager is installed properly, and it is working fine in case of List workflow. I am facing the issue only wrt Site workflow for Project server 2013.
Please help me to solve this issue.
Thanks,
shanky

Hi Kiran,
I am now facing issue while assigning a task to a person in the workflow.
I am having a person named say 'John' , who is included in Project Manager as well as Portfolio Manager.
And I am using a workflow as :
Stage : Conceptual
Assign a task to John (Task outcome to Variable: Outcome5 | Task ID to Variable: TaskID3 )
Transition to stage
Go to Approval
But this is again giving issue as :
Workflow Internal status : Cancelled
Details: System.ApplicationException: HTTP 401 {"error":{"code":"-2147024891, System.UnauthorizedAccessException","message":{"lang":"en-US","value":"Access denied. You do not have
permission to perform this action or access this resource."}}}
PS : I have used the same Sharepoint admin account for 'Account Name' in ‘User Profile Sync' , Is this causing the issue? Please let me know.
Thanks,
Shanky

Help needed regarding BADI.

hi all,
can anyone plz tell me how to define BADI and how create an interface.
plz tell from everything regarding that, i have work with basic ABAP only.
anykind of links and any kind of matter will be helpful and you will be rewarded with points for your help difinatly.
regards.
raman.

Hi Raman,
Please search the forum and you have lots and lots of links in it. For you to start with, try these links,
The specified item was not found.
BADI
Best Regards.

Help needed regarding font sizes

Iam generating pdf documents using oracle developer's report builder.
When i generate and view those pdf's using the web previewer thay appear to be quite fine,whereas when i host them on ias the font sizes gets bigger, thus lot of text gets truncated.
Is there any parameters that has to be set for it.Pls help

Hi Amit,
Thanks alot for your reply. Its really helpful for me.
So,we usually enter these relationships manually only, right? Before going ahead with the custom program, could you please let me know whether there is any SAP note related to this.Once again thanks alot for you help.
Regards,
Kishore.

Help needed regarding insertion of data into oracle

Hi,
I am student currently trying to do a project to up a semantic database using oracle. Have set up the semantic technologies for oracle 11gr2 and used the jena adapter to load an owl into oracle.
But i am not sure how do i insert sample data that could reference the owl.
Tried searching but unable to find any simple tutorial and have also looked through the developer's guide and also jenaadaptor guide.
Is there any tutorials available that could help? thank you

Hi,
Please go to the OTN site for more information:
http://www.oracle.com/technology/tech/semantic_technologies/index.html
There you can find some training info (try the NCI Oracle By Example, it's a good tutorial):
http://www.oracle.com/technology/tech/semantic_technologies/htdocs/semtech_training.html
Regards,
Vladimir

Help needed regarding SUM keyword in an ITAB loop

Hello,
I am maintaining a code as given below.
LOOP AT itab INTO totwa.
SUM.
ENDLOOP.
totwa is defined as a workarea which is needed to hold the sum totals of the fields in the itab. According to the documentation of SUM, it should calculate the sum totals and should put the totals in the workarea mentioned. But somehow its not calculating the value. Could anyone please help me in resolving this issue. Please guide me with your thoughts as to what might have gone wrong.
Note: the itab fields are of type P.
Thanks in advance
Sudha Naik

Hello Suha
According to the ABAP documentation the SUM statement is used in a specific situation:
Syntax
SUM. 
Effect 
The statement SUM can only be specified within a loop starting with LOOP, and is only considered within a AT-ENDAT control structure. Prerequisites for using the statement SUM include using the addition INTO in the LOOP statement, and that the specified work area wa is compatible with the row type of the internal table. In addition, SUM cannot be used when the row type of the internal table itab contains components that are tables. 
The statement SUM calculates the component total with the numeric data type ( i, p, f) of all rows in the current control level and assigns these to the components of the work area wa. In the control levels FIRST, LAST , and outside of an AT-ENDAT control structure, the system calculates the sum of numeric components of all rows in the internal table.
I hope the following sample report will clarify the use of SUM and COLLECT.
*& Report ZUS_SDN_COLLECT
REPORT zus_sdn_collect.
TYPES: BEGIN OF ty_s_line.
TYPES: key(1) TYPE n.
TYPES: value TYPE p DECIMALS 2.
TYPES: END OF ty_s_line.
TYPES: ty_t_itab TYPE STANDARD TABLE OF ty_s_line
 WITH DEFAULT KEY.
DATA:
gs_line TYPE ty_s_line,
gt_itab TYPE ty_t_itab,
gt_itab_coll TYPE ty_t_itab.
START-OF-SELECTION.
DO 3 TIMES.
 gs_line-key = syst-index.
 gs_line-value = syst-index * '2.3'.
 APPEND gs_line TO gt_itab.
 APPEND gs_line TO gt_itab.
ENDDO.
gs_line-key = 4.
gs_line-value = '5.5'.
APPEND gs_line TO gt_itab.
WRITE: / 'Initial list'.
LOOP AT gt_itab INTO gs_line.
 WRITE: / gs_line-key,
 gs_line-value.
ENDLOOP.
WRITE: / syst-uline.
SKIP 2.
WRITE: / 'Using SUM statement with AT END OF'.
SORT gt_itab BY key.
LOOP AT gt_itab INTO gs_line.
 AT END OF key.
 SUM.
 WRITE: / gs_line-key,
 gs_line-value.
 ENDAT.
ENDLOOP.
WRITE: / syst-uline.
SKIP 2.
WRITE: / 'Using SUM statement without control structure (1)'.
SORT gt_itab BY key.
LOOP AT gt_itab INTO gs_line.
 SUM.
 WRITE: / gs_line-key,
 gs_line-value.
ENDLOOP.
WRITE: / syst-uline.
SKIP 2.
WRITE: / 'Using SUM statement without control structure (2)'.
SORT gt_itab BY key.
LOOP AT gt_itab INTO gs_line.
 SUM.
 WRITE: / gs_line-key,
 gs_line-value.
 EXIT.
ENDLOOP.
WRITE: / syst-uline.
SKIP 2.
WRITE: / 'Using COLLECT statement'.
REFRESH: gt_itab_coll.
LOOP AT gt_itab INTO gs_line.
 COLLECT gs_line INTO gt_itab_coll.
ENDLOOP.
LOOP AT gt_itab_coll INTO gs_line.
 WRITE: / gs_line-key,
 gs_line-value.
ENDLOOP.
WRITE: / syst-uline.
SKIP 2.
WRITE: / 'Using COLLECT statement for total sum'.
REFRESH: gt_itab_coll.
LOOP AT gt_itab INTO gs_line.
 gs_line-key = 0.
 COLLECT gs_line INTO gt_itab_coll.
ENDLOOP.
LOOP AT gt_itab_coll INTO gs_line.
 WRITE: / gs_line-key,
 gs_line-value.
ENDLOOP.
WRITE: / syst-uline.
SKIP 2.
END-OF-SELECTION.
Regards
Uwe

Help Needed regarding Mandatory Field.

Hi All,
I have requirement that i have to make certain feilds mandatory in my WD4A view. I have made the "state" property of the fields(input element) as "required". Then i tried doing an event on the view to check whether it throws an error, stating mandatory fields are blank, but i dint get any message.
Please help me to understand whether what i did is suffice or i need to handle the mandatory concept through my code.
Thanks,
Selvakumar M.,

Hi Selva,
You need to call the static method check_mandatory_attr_on_view of class cl_wd_dynamic_tool. This would then automatically verify if all the mandatory fields have been filled or not. It would then populate the error messages into an internal table and display them in the view. Also the mandatory fields which haven't been filled would be highlighted with a red border. You need to put the below coding into the action up on which you want to trigger the data chesks.
data: lt_msg TYPE cl_wd_dynamic_tool=>t_check_result_message_tab,
          lo_view_controller TYPE REF TO if_wd_view_controller,
          lo_message_manager type ref to if_wd_message_manager.
lo_view_controller ?= wd_this->wd_get_api( ).
lo_message_manager = lo_view_controller->get_message_manager( ).
cl_wd_dynamic_tool=>check_mandatory_attr_on_view(
    EXPORTING
      view_controller = lo_view_controller
      display_messages = abap_true
    IMPORTING
      messages = lt_msg ).
Regards,
Uday

Urgent help needed: registry.dat is missing when i run my form in web base

Hi gurus,
i configured my forms and report server in windows 2003 and i received the following error msg when tryin to access my web base forms 6I.
FRM-92129: Registry file http://domain.com/form60java/oracle/forms/registry/Registry.dat is missing.
Details...
Java Exception:
oracle.forms.engine.RunformException: FRM-92120: Registry file http://domain.com/form60java/oracle/forms/registry/Registry.dat is missing.
at oracle.forms.engine.Runform.initRegistry(Unknow Source)
at oracle.forms.engine.Runform.startRegistry(Unknow Source)
at oracle.forms.engine.Main.createRunform(Unknow Source)
at oracle.forms.engine.Main.start(Unknow Source)
at sun.applet.JinitAppletPanel.run(Compiled code)
at java.lang.Tread.run(Thread.java:466)
what can be goes wrong with my steps to receive the above error?? i tried in windows XP and Vista, and i getting the same error message as above.
Your urgent help and advise is needed plssssssss.......
Many thanks in advance.

The URL doesn't seem correct: http://domain.com/form60java/oracle/forms/registry/Registry.dat
I'm expecting a slash (/) between forms60 and java. Have a look in the formsweb.cfg if any paths are misconfigured.
Also, try if the URL with the slash:
http://domain.com/form60/java/oracle/forms/registry/Registry.dat
does work when you just paste it in a browser. It should download the Registry.dat file

Mapping conversion help needed for date

Hi Experts,
I need help in message mapping convesion for date field
The source date field can have value '2010-06-04T02:09:59.610-07:00' or 2010-06-04T02:09:60.610-07:00
I have to change it to '2010-06-04T02:09:59.000-07:00'. ie, if the seconds are 59.XXX, or 60.XXX, then change to 59.000.
Please let me know the best way to do this
Thanks
Mike

Again, to make it more clear
The source date field can have any date value such as
2010-06-04T02:09:59.610-07:00 -
This needs to be changed to 2010-06-04T02:09:59.000-07:00
2010-06-04T02:09:60.610-07:00 -- This needs to be changed to 2010-06-04T02:09:59.000-07:00
2010-06-04T02:09:60.000-07:00 -- This needs to be changed to 2010-06-04T02:09:59.000-07:00
2010-06-04T02:09:59.000-07:00 - This need not be changed
2010-06-04T02:09:58.610-07:00 -- This need not be changed
2010-06-04T02:09:57.610-07:00 etc etc - These need not be changed.
The only change using date function is for the first two dates, in which 59.XXX and 60.XXX need to be replaced with 59.000
Using the above date function, all the seconds 59.XXX, 58.XXX, 60.XXX, etc etc,,, are converted to 59.000, 58.000 and 60.000
I dont need this as per the requirement. So looks like the UDF needs to be altered a little to accomodate my requirement.
Please help me.
Thanks
Mike

Help needed with data security

I need to return my Thinkpad for service but I am concerned with security. For instance, my facebook account as well as other accounts log on automatically because the passwords are automatically remembered. How do I keep my confidential information safe while the laptop is in the technicians hands?
BTW, one of the problems that it has is that I cannot backup successfully with the lenovo application... I managed to get a backup completed with the windows backup program, but I'm not sure of it's integrity.
Please help me with this, Thanks!

Hi,
If I understand you correctly, you suspect software problems.
The first thing the techs will do (probably) is re-image your HDD. I hope you have you important data backed up somewhere - especially if you don't trust the Windows backup.
For that matter, if you do have software issues, restoring a full backup will also restore the problem.
You've probably already considered this, but just in case...
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Help needed regarding the client server communication

this is regarding my networking project which at present i am doing it in java...
the project is abt establishing a server in my lab that controls all the other systems in that lab... now the problem is i have to shut down all the systems in the lab from the server on a click of a button.... this i need to do using socket programming to which i am new....
So can anyone pls send me a sample code as to how to pass a command from server to shut shut down all the systems(clients) ..i need a java program that uses sockets concept to perform the above mentioned operation...pls note i am trying to establish a linux server
regards
lalita

Dear hiwa
i can use it but the constraint in my project is to use only the Socket programming due to time lacks.... i have to find a faster way to communicate between the server and the client...
can u pls help me find a solution for this via sockets...
hoping a favorable response
regards
Lalita

Help needed regarding Dates

Similar Messages

Maybe you are looking for