Help needed setting up itunes on restored iMac.

I had to do a clean install of Lion on my iMac. I backed up all iTunes files.
I am confused on what would be the best way to rebuild my iTunes library so that it will sync with my jphone. Do I have to erase my iPhone and resync with newl I am also confused as to what will I need to sync my iPhone with the newly built iTunes library.
As you can see I am quite confused on best approach to take to setup new iTunes and sync with iPhone.
I look forward to your assistance on this matter.
Thanks....Bruce

hi GooseMan!
this Buegie post might be of some help with that:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=2231034
love, b

Similar Messages

HT1414 Why do I need to use iTunes to restore my iphone to factory settings

Why do I need to use iTunes to restore my iphone to factory settings

You don't. Go to Settings/General/Reset - Erase all content and settings

Help needed setting up print server

i got 2 printer:
1 usb inkjet epson 1290
1 hp5100 network
i have 1 server:
serving epson for our col proof using powerripx as driver and shared via os x print server
i have 2 network interface card on the server.
my problem is: the position of the server in the office has only one network interface port, i want to have my HP connected to the 2nd network interface of the server and the server connected to the only available network point there and thus have the server serving both printer.
have set up the en1 interface, enable NAT, dhcp, firewall, but the server itself does not recognised the hp which is connected to the 2nd ethernet interface. when i move it on top of the ethernet list in system preferences it does recegnised it but the the whole print server is not accessible on the network.
can someone with more experience help me set this up.
thx

I didn't say it's impossible. I just offered an easy solution to your problem that will save you and you users some hassle in the long run (eg. when you come to troubleshoot you wn;t have to look at 2 networks and a firewall). I guess I just like easy solutions. And ,dude, 20 bucks...
If you want to go the hard(er) way you need to:
1. set up a second network address range on the second card
2. give the printer a fixed IP address within that range
3. ensure firewall is not blocking packets from/to the printer
4. config the printer on your print server & clients
hth,
b.

Help Needed Setting Up IMAP Relay?

I an currently maintaining an OS X 10.4.11 Tiger server, running on a PowerMac G4 Mirror.
Currently, we have our mail setup through our isp via pop (they do not offer imap). All of our employees have set up several access points to the pop server (i.e. home, office, smart phone, etc.). However, the problem arises that as each device is maintaining its own mail, when accessing mail on each device, mail read on one device still shows as unread on the others. As well as, any mail sent from one device, does not exist on the others.
To eliminate the duplication, and missing mail, I thought setting up an imap server would keep all devices in sync.
My thought is, collect all the mail from the isp pop server, onto the OS X server and then have the employees access only the imap server from all the devices.
i.e.
Setup imap server
setup imap server to download mail from pop server, and save in the appropriate account.
setup all client mail accounts to access imap server.
I have been able to set up the imap server without any issues, however, I have not been able to figure out how to get the pop server mail from the isp into the local imap database.
I hope this make sense.
I know there are free services out there that will do what we want, but we do not want to rely on an external service if it is a process we can maintain internal.
If anyone can help me set this up, or suggestions on how to approach this problem, I would be very grateful.
TIA

I'd probably have a conversation with the mail ISP along the lines of "add IMAP, please" and that will either be followed by happiness, or by migrating to another mail vendor, or migrating to local mail services.
I've bucketed mail over (via imap), and it's not really a good solution; there are a number of wheels that need be kept spinning and by the time the dust settles (outages, glitches, the usual cruft), you might as well either re-host mail to to another mail ISP that offers imap (gmail, for instance), or simply run your own mail server.
Usual tools are imapsync and offlineimap, and those target (obviously) imap and not pop. (I haven't seen much that does a pop pull, but it's likely feasible.)
If you decide to host your own, you'll probably want to upgrade to something newer than the PPC gear, and you'll need to sort out your public forward and reverse DNS for your mail server, and ensure all that matches your MX record.

Need help with setting up iTunes match

not able to get my itunes match to work on my iphone 3gs

If you are getting an error that you are not subscribed this generally means you need to sign into the mobile iTunes Store with the exact same iTunes account ID that you used to enable Match in iTunes.
Go to Settings > Store and confirm the ID. If necessary, sign out then back in. Then go to Settings > Music and set iTunes Match to "on."

Computer old and probably going to die soon. Help needed backing up iTunes

My G4 has lost most of it's hard drive space and I'm too stupid to figure out how to clear it up. You guys have tried to help me, but my mind goes numb after I get past 'Emptying the Trash'. I've come to the realization that I must now buy a new Mac. I have an external hard drive that I've backed up most of my stuff on, but I'm a little concerned about my iTunes music. When I drag music onto the external drive, they seem to transfer correctly. However, when I look at the song icon on the external drive, there is a little padlock next to each song. Padlocks frighten me. Does this mean that I'll not be able to open these songs when I try and put them on my new computer? I appreciate any help you can give me. If you are kind enough to try and help, please type your instructions as if you were talking to an infant.

Let's work on the freeing up space issue. This is like looking at your house and saying you need to find about space usage.
Let's start with Disk Inventory. Download the .dmg file, click it to get it to mount (make a pretend hard drive). Then copy the application to somewhere on your computer. Drag the pretend hard drive to the trash and double click on the copy on your computer to start the application.
When DI starts it will look at your computer for drives/volumes. It will show the size of the volume and how much is free. What does it say?
After that, click on a volume (if you have more than one) and have it start analyzing the volume. When it's don't you'll have a map of the drive, and a key to the colors and file types on the right. The types will be organized according to how much space each type is taking up in total. DI tells me on my computer I have 50GB in mp3 type music files, 6.5 GB in mp4 type music files, and so on. Now' there's also a few other things to note. Although most of my music files come under "MP3 audio" at the top, I also have a few GB under "Mp3 Audio File" a little ways down the list, and even "mp3 document" - all mp3 music files. I also have some movies as "AVI". So I can see at a glance that over half my 120 GB drive is being taken up by two file types.
Now if I want/need space I have to look at what's taking up room. I can see I have a lot of mp3, mp3 audio, aac, and related music file types. Itunes itself reports many GB of music so I am not surprised about this. I can select a file type series such as "mp3 audio" and right click or control+click on it to show files in selection list. When I do that a new window appears listing all my mp3 files. I can scroll down the list. When doing so I did notice one file I had in duplicate which was taking up 20 MB of space. I then right clicked on it and sent the duplicate to the trash. Incidentally, I knew there should only be one copy of that file, and getting rid of 20 MB won't free up your computer by a whole lot unless you have 200 files of that kind.
Unless you have a tiny drive we're probably only interested in what's taking up GB of drive space, or at most maybe hundreds of MB. You can spend hours going through 1 MB files and not free significant space (though it is good for general housekeeping). So, keep on selecting a set of the big file types and right click to show in selection list. Then scroll down the selection list which will also be organized according to file size. Look for big files and decide if you want to keep it.
A few things to note.
You're mostly looking for files that will include your name in the "path" column. Disk Inventory lists all files, including many big ones that are system files and should not be touched. I have 5.5 GB as "Documents" but the top 3 are large system files. Below that, however, I notice I have 3 copies of a photograph file which got listed as a document because I don't have the software for opening the file on this computer and the computer decided it was a document. Since I recognize the file name as something I created 2 years ago I know what it is and that the should only be one copy. I can definitely get rid of two copies of the file and free up 260 MB that way.
What you are initially looking for are things you would probably recognize by name and say "Oh, that's where I put that movie!" Or you'll see you have two copies of a huge movie file and that's what's taking up space. Or you'll simply see you have 20 movie files, all of which you want to keep but you'll see that that's where 10 GB of your drive have gone.
After doing this initial browse you may find you have some odd files that you recognize but forgot you have and can now delete. You may also decide you have nothing you can get rid of but at least now you know and you don't have any option but to move files to other places. Or you may decide need a bigger hard drive, or possibly upgrade the whole computer to one with a bigger hard drive too, but at least making that decision. With the advent of digital media many people are simply outgrowing their drives.
In a few cases something may be going wrong and creating either a huge log file. There's something called swap files which will be big but belong there. If you see anything that's bigger than a GB but you don't recognize, ask about it here.

Help Needed : Setting JDBC Datasource in Crystal XI using Sybase 12.5??

All,
We are migrating our systems to the Crystal XI from Crystal 9 Reporting Servers. I need some technical assistance on the Java API ( use of the Datasources) .
Problem: Currently in Crystal 9 we are using OLEDB datasources to connect to various Sybase 12.5 databases (which is been set programmatically at runtime). After I changed the Java code for getting the report object from the Crystal XI server instead of 9. I stared facing the dbLogon failed exceptions.. But surprisingly it does work randomly on only one datasource for a given session (AppServer Restart).
Need Help on Topics:
1. Is there any different way of configuring/usage the OLEDB datasources for CrXI? or any Java API changes while setting the datasource when using OLEDB?
2. Configuration required for using Simple JDBC connection (Sybase) instead of OLEDB? Can I get detailed help on this.
I will prefer using JDBC for CrXI using the Sybase 12.5, but there are very less documentation for how to configure and set databases at runtime.
Many Thanks in Adv.
Regards - Sudhir Deshmukh | Solutions Lead

Hi Sudhir,
For Building up a connection for OLEDB we need :
In order for Crystal Reports to connect to a database through OLE DB, there are some requirements that must be met:
u2022     The database client software must be installed on the client machine.
u2022     The client machine must be able to connect to the server from its client software
u2022     The client softwareu2019s working directory (example. c:\orant\bin) must be in the Windows search path
u2022     The OLE DB provider must be installed on the local machine.
We have the connection for crystal reports through OLEDB :
The process by which Crystal Reports access data from an OLE DB data source consists of these five layers:
Crystal Reports Layer
OLE DB Translation Layer
OLE DB Layer
DBMS Translation (OLE DB provider) Layer
Database Layer
The data translation is similar to the ODBC connection model. Crystal Reports uses CRDB_ADO.DLL to communicate to the OLE DB provider, which communicates to the database. Crystal Reports can connect to any database as long as that database has an OLE DB provider.
When creating a new report in Crystal Reports, OLE DB data sources are found in the Create New Connection folder with the OLE DB (ADO) connection.
Regards,
Naveen.

Help needed setting up Related Content in HCM 9.1 PeopleTools 8.51

I need some help setting up Related Content in HCM 9.1 PeopleTools 8.51.
I created a new service id in "Define Related Content Service". Its simple, it basically goes to google.com.
Then I assigned Related Content to Application Pages on the "Manage Related Content Configuration" page. I'm my scenario I added it to Careers right under the root menu.
Then I went to the careers page, but the "related information" link doesn't appear. How do I get that related information link to appears in the top of the component/page?
Thanks,
-Cory

In order to get this to function, there are some baseline server configuration requirements that you need in order for it to work.
1) Define the authentication Domain on the webserver
2) Define the authentication Domain on the web profile
3) Enable Single Sign-On
The following document in 'My Oracle Support' will provide you with the details on configuration related content services.
E-PORTAL: How To Configure Related Content Service. [ID 984855.1]
In addition here is a link to the online PeopleBooks that discusses the configuration of the related content services.
http://download.oracle.com/docs/cd/E18083_01/pt851pbr0/eng/psbooks/tprt/book.htm?File=tprt/htm/tprt20.htm#H3002
In addition, there are also some know limitations on the use of related content that are different dependent on the tools version you are using.
Hope this helps.

Help need setting up remote desktop (on a router)

hey networking pros,
I have major trouble setting up remote login (remote desktop).
Specification : OSX tiger, LINKSYS
now i have managed to use tightVNC and manage remote desktop BUT that was when i was on the same network. Now my laptop lies at home and at school (work) i have windows running and want to access my mac at home. I cant manage to do that. Since i am on a different network and that i have router at home and also i do not use air port express (i use a linksys)
I need a static ip which in need to know the DNS servers (adelphia dosent give that to me since i am not a business customer). I have enabled port forwarding (5900) i have even set up an an account with dysDNS.org (i dunno how that helped).
can some one please give me with step by step instruction.
thanks

You already have most of what you need, but you do need a little more understanding of what you're doing.
Keep in mind that the Microsoft Remote Desktop Connection client is one-way only. You can connect from a Mac to a Window XP Professional computer, but not from Windows XP Pro to Mac OS X. What I describe below is how to connect from a Mac on the Internet to a Windows XP Pro computer at home.
First, Remote Desktop may look like VNC, but it's not the same thing. Therefore, port 5900, which works with VNC, won't work for Remote Desktop. You'll want to port forward 3389 to make this work. When you go to your router and make this port forward entry, you'll enter the IP address of the machine you want to direct all RDC traffic to. This gets the RDC traffic from your router to your computer.
You went to DynDNS.org to help you find your router on the Internet. The IP address, as you've researched, can change. But if you set up your router to report its IP address to DynDNS then you can always connect to your router by name. You don't have to keep track of your IP address changing. DynDNS will do this for you. This gets the RDC traffic from you to your router.
So, the steps are:
1. Set up a DynDNS.org account and you'll give yourself a name such as "myrouter" so that you can use a name like "myrouter.homeip.net" to connect to your home network.
2. On your router, port forward all incoming Internet 3389 traffic to the IP address and port 3389 of your computer.
3. On your Windows XP Pro computer (you can't do this with Windows XP Home) enable the Remote Desktop Connection software (right-click My Computer --> Properties --> Remote tab --> select the second checkbox).
4. From a Mac somewhere on the Internet, open the RDC client and enter the DynDNS name you gave yourself and click the Connect button.
5. Your Mac will contact DynDNS and get your current IP address.
6. Your Mac will then connect to your home router, which will forward all RDC traffic (coming in on port 3389) to your Windows computer in your home.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.4)

Help needed setting up printParams in c#

I am trying to setup a automated print to PDF file setting from within my C# .net application. I have made good progress with setting up the needed code but i am unable to set the right printParams to pass the reader to print the PDF to a new PDF file by giving it a file name in the printParams.
I user Adobe Professional 9.0 and .net 3.5
Below is the code i have. Running these params gives me a exception. I have comments above each param. Any help is appreciated.
                                 //binaryOK,bitmapDPI,booklet,colorOverride,colorProfile,downloadFarEastFonts,
object[] printParams = { true, 300, null, 1, "Printer/PostScript Color Management", false,
                                       //fileName,firstPage,flags,fontPolicy,gradientDPI,interactive,lastPage,nUpAutoRotate
                                       "TestPrintJs.pdf", 0, 0, 0, 150, 0, _pdDoc.GetNumPages() -1,false,
                                       //nUpNumPagesH,nUpNumPagesV,nUpPageBorder,nUpPageOrder,pageHandling,pageSubset,printAsIma ge
                                       2,2,false,0,0,0,false,
                                       //printContent,printerName,psLevel,rasterFlags,reversePages,titleLabel,tileMark,tileOverl ap,tileScale,
                                       0,String.Empty,0,0,false,false,0,0,1.0,
                                       //transperencyLevel,usePrinterCRD,useT1Conversion
                                       100,0,0};
T.InvokeMember(
                    "print",
                    BindingFlags.InvokeMethod |
                    BindingFlags.Public |
                    BindingFlags.Instance,
                    null, jsObj, printParams);

What led you to believe that is the order in which arguments will be processed? There is no defined order, and it's certainly not alphabetic. Print is expecting an object with named properties that it can reference - not simply an ordered array.

Help needed setting up an accelerometer via serial port

Hoping you might be able to give me some advice and point me in the right direction as my experience with labview is limited.
I am wanting to read data from an accelerometer streaming through a serial port. Using the labview examples i have no problems in connecting to the device and seeing the data but i am going around in circles trying to work out where to from now.
I need to create a VI which would show data streaming and then gives the user the ability to save data for various time periods to a text file. I am getting stuck as the data from the accelerometer is constantly streaming in 20byte packets every 2ms in the following format: 7E 00 0E 83 00 00 26 00 01 0E 00 02 00 01 F9 02 64 E5, where 00 02 01 F9 02 64 is the data of interest and of course when starting to read from the device it isnt necessary going to begin at the start of the packet.
I am assuming that inside the while loop i need to get the vi to scan the string to find the start of the first packet and then begin writing it to an array using a shift register for each sample with the left over from the string if not reading the full packet being attached to the next read, then if the data is to be saved to a txt file get it to enter a for loop for the user to define the number of samples to be saved or use an index array option to save a subset of data to a txt file.
Would greatly appreciate any device or examples of the most efficient way to set this up before i lose my sanity!

The easy way is a three step process.
First, acquire 2n-1 bytes (39 in your case) so you are sure you have a full set of data. Parse out the first full set using the string utilities (match pattern, split string, etc.). The remainder of the string is the start of your next data set.
Second, acquire enough points to get the next data set and parse it.
Third, continue looping and getting 20 bytes (keep verifying your start and end so you know if there are glitches).
A harder, but far more robust, way, is the following:
Read in data until you get your start sequence. A circular buffer would be useful for this (you will need to implement this yourself).
Read in your data of interest and record/save/...
Read in the terminator.
Repeat as needed.
For all of these, you can use a flat sequence in a loop, but a state machine is far easier and more flexible in the long run. Check out the LabVIEW help and these forums for how to create and use a state machine.
It is often easier to use arrays of U8s instead of strings for this type of data manipulation. Under the hood, they are the same thing, so the conversions between the two are highly efficient.
Let us know about any problems you run into.
This account is no longer active. Contact ShadesOfGray for current posts and information.

Help needed setting up access point to public network

Hi from a newbie,
Assuming they are suitable, I want to use one (or two) AP1232AG-E-K9 access points for Internet connection through a public wireless network (BTFON), where wire broadband is not an option. I've downloaded what I think is the correct manual for the APs and I'm now scratching my head as to where and how to start setting them up. I want to use these Cisco APs in the hope they will give me better wireless performance than I'm currently getting, which is frequently flakey.
I've tried to reset the APs to the factory default but there seem to be different ways of doing this depending on what you want and what you've got. I made up a console cable to access the console but there even appear to be different versions of this so I'm not sure if the cable I have is the correct one.
I have setup and used lower end wireless devices in the past but these Cisco units seem real complicated and I'm going to need help in getting them working.
Any assistance would be much appreciated.
Kind regards,
Glenn.

Updated network diagram.

Help needed setting specific date in GregorianCalendar object?

Hi All!
I have set SimpleTimeZone object in GregorianCalendar object. How can I set a new date to the GregorianCalendar object, such that i can find DAY_OF_YEAR specific to this date's day?
URGENT replies will be appreciated!

Thanks for ur reply!
but the problem is that i have to create a method:
public int getDayOfYear(int day, int month, int year)
return day_of_the year;
This method should accept user specified day, month and year and passes to GregorianCalendar/Calendar object. I need want to get DAY_OF_YEAR value from Calendar.DAY_OF_YEAR which it will provide, but the change is not affecting!
ACTUAL CODE
===========
public static double getDayofYear(int hr, int min, int sec)
String[] ids = TimeZone.getAvailableIDs(5 * 60 * 60 * 1000);
SimpleTimeZone pdt = new SimpleTimeZone(5 * 60 * 60 * 1000, ids[0]);
for (int i=0; i<ids.length; i++)
System.out.println (ids);
//setting DLS start and end rule
pdt.setStartRule(Calendar.MAY, 1, Calendar.SUNDAY, 00 * 60 * 60 * 1000);
pdt.setEndRule(Calendar.OCTOBER, -1, Calendar.SUNDAY, 00 * 60 * 60 * 1000);
Calendar calendar = new GregorianCalendar(pdt);
//Date trialTime = new Date();//SET DATE
//calendar.setTime(trialTime);
calendar.set(Calendar.HOUR,hr);
calendar.set(Calendar.MINUTE,min);
calendar.set(Calendar.SECOND,sec);
return ((double) calendar.get(Calendar.DAY_OF_YEAR));
This method is giving true output for today [2nd Dec. 2002 -> 336], but only when it accepts current time, not date. Also giving same output on changing arguments!
Hoping ur help!

Help needed setting up network

Hi
I have an NTL/Virgin Media cable modem with 20mb service.
I did have this connected to a WRT300N 4 port wireless router which had 1 PC running XP connected to port 1.
port 2 had a mains powerline ethernet adaptor which fed to an xbox360.
port 3 went to a DLink 16 port which had 1 Vista PC and an HP Laser printer attached.
I also have from this hub 1 airport extreme and 1 macmini which has a 1TB usb hdd as iTunes library which was wirelessly serving an Apple TV.
my Macbook Pro laptop was getting wifi from the airport extreme but backing up to a 1TB time machine via ethernet.
allthough all was working internet speeds seemed very slow (even though not all on at the same time) on speed tests i was getting around 2mb downloads. so i thought i would try and refine the setup.
by plugging the macbook pro into the cable modem i get speeds around 17-19mb, as soon as i put the wrt300n in between speeds drop back to 2mb even just putting the dlink hub in between the modem and macbook pro the speed drops right down.
can anyone help with network setup suggestions where i can let my wife use xp for internet and email whilst i can use the macmini to download itunes tv, movies and music and stream to apple tv and occasonally xbox online without lag etc???
all help greatly appreciated
Kev

TSG wrote:
yep, tried changing cables....even upto cat6!!! no joy.
starting to do my head in now.....might call in a network person/tech but i hate the idea of being charged to see him repeat all i have already done!
Agreed. I'd keep at it yourself. I guarantee it will be something simple.
what are the benefits of a switcher? (never used one before) any recomends?
A switch is just like a hub, except that instead of always sending packets to your entire network, it only sends them where they need to go. The benefits grow with the size and speed of your network. Switches used to be much more expensive than hubs but not any more. Normally I'd recommend almost any Linksys device, but in this case dlink seems to have a better one:
http://www.amazon.com/D-Link-DGS-2205-5-port-Desktop-Switch/dp/B000FIVDIA
Again, I don't think your dlink hub is responsible for this dramatic bottleneck though.

Help needed setting up WebUI for Wireless Gateway

I have a problem setting up a webUI for my demo project.
I am just doing a simple WSN application measuring temperature on a WSN-3121 thermocouple node, and logging it on a wireless RT gateway NI 9792.
Then I wanted to create a web UI for it, and display whats in the gateway's UI - see project.
SO I'm coming up stuck with the web UI. I've tried reading as much as I can but I still dont know what I'm doing wrong.
As far as I can see, I need to create a web service in the build specs for my gateway, and place the gateway_main.vi as the vi to use. Then build it, and deploy it. Once that has happened and I run the vi on the gateway, I created a webUI as shown in the pic, where it imports the web service from the gateway using 192.168.0.16:8080 - that works fine.
When I run the webUI, it just sits there and times out.
I am using LAbview 2010. Please help.
Solved!
Go to Solution.
Attachments:
Straight Temperature Monitor.zip ‏2152 KB
webUIsetup.jpg ‏75 KB

Hello markza,
Your approach to using Web UI Builder and understanding its use case is exactly right, the issue lies in the web service you have deployed. The VI you are building as a web service, i.e. gateway_main.vi, has while loops in it and hence cannot be used as a web service. The reason for the timeout is that your UI Builder app is calling the LV2010 web service and is getting stuck there waiting for the while loops to complete. Also, the cluster datatype is not supported in Web UI Builder so you would have to break up the Wireless Node Sampling Time input into two separate numeric inputs.
I would recommend creating a subVI out of your code inside the inner while loop in gateway_main.vi. This subVI should have two numeric inputs to replace the cluster (as mentioned above) and not have either of the Start or Stop boolean inputs. Outputs would stay the same i.e. two doubles and a boolean.
Let me know if that helps you and if you have any further questions.
Thanks!
Diya Jakkidi
LabVIEW Web UI Builder R&D

Help needed setting up itunes on restored iMac.

Similar Messages

Maybe you are looking for