Help Needed! T60 can't reach internet

Please help me to resolve this problem on my 3+ year T60 ThinkPad.
Suddently, my laptop couldn't reach any internet, either local area connection or wireless connection.
I followed the troubleshooting on Lenovo.com and processed all the steps. However, it didn't work for my case.
(1) When I input "ipconfig/release" and then input "ipconfig/renew", this message appeared: An error occurred while renewing interface Wireless Network Connection 2: unable to contact your DHCP server. Request has timed out.
(2) When I tried to "ping 127.0.0.1", here, "transmit failed, error code 5".
BTW: The hardwares should be in good conditions, and I also re-installed the drivers and TCP/IP.
Thank you very much for your help.

Try booting in "Safe" mode, and then try shutting down.
<http://support.apple.com/kb/ht1564>
Safe mode will not load 3rd party drivers:
com.Ralink.driver.RT2870USBWirelessDriver 4.1.6
com.paceap.kext.pacesupport.snowleopard 5.8
com.Apogee.driver.EnsembleFWOverideDriver 1.4.4
If shutting down in Safe mode works, then one of those 3rd party drivers is your root cause

Similar Messages

UC560 - CUE can not reach internet

Hello all, new here, but not new to using Cisco equipment. I am however new to the phone side of Cisco.
I'm currently working on an issue with my CUE traffic not routing out to the internet, however I'm feeling rather stumped at the moment and was hoping to get some insight from the community.
As a bit of background - on my UC560 the CUE IP is not the default, I had to change it due to an IP conflict (that was a painful process). If I have a terminal open to the UC560, I can ping the CUE, and ping out to the internet. If I open the session to the CUE, I am able to ping the UC560, however unable to ping an internet IP (i.e. 8.8.8.8).
Here are the results of a sh ip route:
S*    0.0.0.0/0 [1/0] via 10.1.0.1
      10.0.0.0/8 is variably subnetted, 7 subnets, 3 masks
C        10.1.0.0/24 is directly connected, Vlan1
L        10.1.0.228/32 is directly connected, Vlan1
C        10.1.1.0/24 is directly connected, Vlan100
L        10.1.1.1/32 is directly connected, Vlan100
C        10.10.10.0/30 is directly connected, Vlan90
S        10.10.10.1/32 is directly connected, Vlan90
L        10.10.10.2/32 is directly connected, Vlan90
I will be happy to share more configuration items as requested. Any help would be greatly appreciated.
As an additional note, I would need the Vlan90 (CUE) traffic routed (Or maybe NAT'd) through the UC560, as I can not make any changes to the current router.
Thank you in advance!

The existing LAN is on the 10.1.0.0 Network. When I session into the CUE, I can ping 10.1.0.228 (The LAN IP of the UC560), but I can not ping 10.1.0.1 (LAN Router - which I can not adjust routes) or any other LAN hosts.
Is there a way I can setup a route for the 10.10.10.0 through the LAN interface (10.1.0.228) of the UC560? Or a way to NAT the 10.10.10.0 traffic behind that interface?

Help needed--Graphite airport not accessing Internet.

My daughter is trying to get our old graphite airport to be the wireless router for her network. When the airport is plugged into the cable modem, her ibook (10.3.9) can 'see' the airport (the icon is black with full strength signal) but she can't get on the Internet. (When her computer is connected directly to the modem via ethernet she has no trouble getting online.) She's tried a soft reset--she was able to change her password and remove the encryption but that didn't help. When she tries using the set-up assistant, the computer can see the airport network but on the next screen her base station doesn't appear in the list even with rescanning, though her airport icon is black with full strength so we know the computer can see the airport. She has unplugged the airport and turned it back on--still nothing. Safari simply loads and loads forever without any page appearing.
What else should she try? Would a factory reset help? The article at Apple support says for a hard reset the airport must be connected to the computer via a crossover ethernet cable, but that must mean that the airport is not connected to the internet during the process--correct?)
Thanks for any help you can give us.

Use AirPort Admin Utility to administer the Graphite.
I don't think another reset is what you need. Since the computer is able to join the Graphite's wireless network (hence the black icon), all it needs for Internet access is a working IP address. The default settings for the Graphite after a reset are for the Graphite to receive an IP address using Ethernet and DHCP (see the Internet tab of AirPort Admin Utility) and to distribute IP addresses using DHCP and NAT (see the Network tab of AirPort Admin Utility). These settings are what you want.
I think the problem is probably that the cable modem is remembering the computer's MAC address and is not giving an IP address to the Graphite. With the computer shut down and the Graphite's power unplugged, reset the modem with its reset button if it has one. Otherwise, unplug the modem's power for at least 5 minutes. Then turn on the modem, the Graphite and the computer (in that order), waiting a few minutes between them.

Can not reach internet from vlan on 3560 switch but can from switch

ISP provided me IP (207.70.170.42) and gateway address(207.70.170.41) connecting to their router( meto E).
I can ping outside the network when logged into the switch through telnet but not when connected through a pc on the vlan.
I can ping the IP address on port GI0/1 207.70.170.42 from the PC on vlan 99 (192.168.20.3).
What do I need to configure to get the VLAN to send traffic to the internet.
Tried ip route 0.0.0.0 0.0.0.0 207.70.170.41
Tried ip route 192.168.20.0 255.255.255.0 207.70.170.41
Tried ip route 192.168.10.0 255.255.255.0 207.70.170.41

Hi @rbrewer02,
Are you doing NAT or PAT for private IP addresses? Remember that the ISP just see the public IP address that it gives to you (207.70.170.42 in your case).
You should configure NAT so that your private IP ranges get translated into your public IP address.
If you need help in configuring NAT just tell me.
Rgrds,
Martin, IT Specialist

Help needed: How can I import a large audio collection with many playlists? iTunes crashes because so many playlists try to load and play at once.

I've got a problem that I can't seem to figure out after reading scads of articles and posts. I'd be grateful for any help or ideas you can provide. Here's what's going on.
I have a folder of GraphicAudio audio books. It contains roughly 500 subfolders, one for each book. In each folder are the mp3 files for the book and an m3u file that was supplied with the books at the time of purchase. None of this content is currently in my iTunes library.
When I try to add this folder to my iTunes library, iTunes starts trying to play each playlist it encounters. It crashes after around 30 seconds. I suspect this is because it tries to switch and play playlists so rapidly.
I don't actually want iTunes to start playing each playlist it finds. I just want to import my files. Once they're imported, I can select them and send individual books to my iPod Touch.
Do any of you know of a work-around for this? I'm dreading the thought of having to import each subfolder one by one. I keep thinking that if I could just prevent iTunes from automatically trying to play the playlists, it would import the mp3s and playlist info without a problem. If there's no way to do this in iTunes, might there be a third party app that can manage it somehow?
For reference, I'm using the latest version of 64 bit iTunes under 64 bit Windows 7.
Thanks for taking the time to help me.

I've written a script called DeDuper which can help remove unwanted duplicates. See this thread for background.
That said you should probably start by "undoing" the creation of extra mp3s. If you sort the song list on the Date Added column you can select then first song from the relevant batch, then scroll to the end of the group, hold shift and click to select the range. You can then delete and send to the recycle bin.
My script won't be as effective against this group. The "Convert to format" tool may well specifiy a different bit rate from the source file, but it won't ever increase the quality of the audio. Clearly converting 128k mp3 to 256k mp3 would have no benefit so you want the original files.
If you still have duplicates use the script to thin out what remains.
tt2

Help Needed i can't connect to the router via VPN

I can not connect to my server via the VPN client i have attached the config. I also havve a bif problem i can't use the webb gui any more and idon't know why.
Thanks i advance

You would need to change the NAT from standard ACL to extended ACL as follows:
access-list 150 deny ip 192.168.1.0 0.0.0.255 192.168.0.0 0.0.0.255
access-list 150 permit ip 192.168.1.0 0.0.0.255 any
ip nat inside source list 150 interface ATM0.1 overload
no ip nat inside source list 1 interface ATM0.1 overload

Help needed. Can I import MTS files directly into FCE?

I am currently using iMovie, but iMovie doesn't recognise the .MTS files that my Panasonic AG-HMC41E produces.
I was thinking of upgrading to Final Cut Express, but I don't know if that will solve the problem or not.
Can anybody confirm that FCE will enable me to directly import .MTS files?
Thanks in advance,
Mike

As far as I have heard, transcoding to Apple Intermediate Codec (AIC) makes a file that scarcely looks different from the original MTS; I should remind you that if you were able to ingest the MTS files directly into iMovie or Final Cut Express, they will do the same thing - transcode to Apple Intermediate Codec; they're just doing it within the interface of a capturing process. When they are ready for editing, they are now AIC. An app like Streamclip or ClipWrap is just helping you get this done outside of FCE or iMovie.
ClipWrap 2 can rewrap your mts file as a MOV and leave it untouched - quality is the same. However, FCE won't edit that without having to render a lot. It's best to transcode it to AIC.
There is a higher quality codec than AIC, called ProRes, but only Final Cut Pro can edit this.

Help needed! Can I do this?

Hi,
When a browser access my servlet, I can add certain header to the response from my servlet.
I want this header be extracted from the response, and be added to the request when a link in the response page is clicked.
Can I do this? Please help.
Harry

Can you use cookies?

Home sharing help needed - why can't it see my iMac?

Here are my specifics:
Apple TV (2nd gen) - version 6.0.2
iTunes - version 11.1.3
AirPort Extreme (4th gen) - version 7.6.4
My Apple TV cannot see my iMac. I suspect something with the router but I'm not a techie and don't know why it suddenly doesn't work. I've tried turning on / turning off / resetting everything but no luck. My firewall is not on. I'm not interested in using a previous software version. Can anyone provide any help? Thank you.

Yes and Yes.
I also have a MacBook and noticed that my iMac and MacBook can share their iTunes libraries between each other. But my ATV can see neither the iMac nor the MacBook.
AirPlay is also missing on my iPad and iPhone - does this all point to a problem with ATV?

Help Needed! Can't reset JTable / TableRowSorter

Hi, all! I've made a prog that dynamically loads a table, but rowsorter works only for the tab that was loaded first.
I've tried to set both JTable and TableRowSorter to null, and invoked TableModelChanged but that didn't help. It loads new table fine, but as soon as you click on header it jumps to the old one.
I also checked RuleBasedCollator within the rowSorter, but this did not help either.
Looks like the table data is stored somewhere out of JTable and RowSorter. Does anyone have any ideas what's wrong? The code is below.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.Vector;
import java.io.*;
import javax.swing.filechooser.*;
import javax.swing.table.*;
import java.text.*;
public class JTE {
public static void main(String[] args){ SwingUtilities.invokeLater(new Runnable(){ public void
run(){
   new dk_MF();
class dk_MF{
JTable tab;
JFrame win;
JFileChooser fc;
dk_MF(){
win = new JFrame("Java Table Editor");
win.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
win.setJMenuBar(makeMB());
win.setSize(410,220);
win.setVisible(true);
fc = new JFileChooser();
javax.swing.filechooser.FileFilter filter = new FileNameExtensionFilter("Tables", "csv", "txt");
fc.addChoosableFileFilter(filter);
win.addWindowListener(new WindowAdapter(){ public void windowClosing(WindowEvent e){ }});
public JMenuBar makeMB() {
JMenuBar mb = new JMenuBar();
JMenu lev1men = new JMenu("File");
JMenuItem lev2men = new JMenuItem("Open");
JMenuItem lev2me2 = new JMenuItem("Save");
JMenuItem lev2me3 = new JMenuItem("Exit");
lev2men.addActionListener(new ActionListener(){ public void actionPerformed(ActionEvent e) {
   int rv = fc.showOpenDialog(win);
   if (rv == JFileChooser.APPROVE_OPTION) {
    File file = fc.getSelectedFile();
    constructTable(file);
    JScrollPane jsp = new JScrollPane(tab);
    win.getContentPane().add(jsp);
    win.pack();
lev2me2.addActionListener(new ActionListener(){ public void actionPerformed(ActionEvent e) {
   int rv = fc.showSaveDialog(win);
   File file = fc.getSelectedFile();
   setTabData(tab,file);
lev2me3.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_1, ActionEvent.ALT_MASK));
lev2me3.addActionListener(new ActionListener(){ public void actionPerformed(ActionEvent e) {
System.exit(0); }});
lev1men.add(lev2men);
lev1men.add(lev2me2);
lev1men.add(new JSeparator());
lev1men.add(lev2me3);
mb.add(lev1men);
mb.addMouseListener(new MouseAdapter(){ public void mousePressed(MouseEvent e) {
System.out.println("Mouse pressed"); }});
return mb;
public void constructTable(File fil){
Vector<Vector> bigvec = getTabData(fil);
Vector smallvec = (Vector) bigvec.elementAt(0).clone();
bigvec.remove(0);
tab = new JTable(bigvec, smallvec);
tab.setPreferredScrollableViewportSize(new Dimension(400,200));
tab.setFillsViewportHeight(true);
TableRowSorter<TableModel> sorter = new TableRowSorter<TableModel>(tab.getModel());
tab.setRowSorter(sorter);
//tab.setAutoCreateRowSorter(true);
//sorter.setRowFilter(RowFilter.regexFilter(".*ïè.*"));
TableColumn fcolumn = tab.getColumnModel().getColumn(0);
JComboBox comboBox = new JComboBox();
comboBox.addItem("òåêèëà"); comboBox.addItem("ðîì"); comboBox.addItem("áðàãà");
fcolumn.setCellEditor(new DefaultCellEditor(comboBox));
public Vector<Vector> getTabData(File fn){
Vector<Vector> bv = new Vector<Vector>();
Vector<String> sv = new Vector<String>();
String ln;
String[] pcs;
try{
BufferedReader
br = new BufferedReader(new InputStreamReader(new DataInputStream(new FileInputStream(fn))));
while((ln = br.readLine())!=null){
   pcs = ln.split("\t");
   for(int x=0; x < pcs.length; x++) { sv.add(pcs[x]); }
   bv.add((Vector)sv.clone());
   sv.clear(); }
br.close();
} catch (Exception e) { System.out.println("Error while reading: " + e.getMessage()); }
return bv;
public void setTabData(JTable data,File fn){
try{
   PrintWriter pw = new PrintWriter(new FileWriter(fn));
   for(int col=0; col<data.getColumnCount(); col++) {
    pw.print(data.getColumnName(col));
    if (col!=data.getColumnCount()-1) pw.print("\t");
   } pw.println();
   for(int col=0; col<data.getRowCount(); col++) {
    for(int row=0; row<data.getColumnCount(); row++){
     pw.print(data.getValueAt(col,row));
     if (row!=data.getColumnCount()-1) pw.print("\t");
    } pw.println();
   } pw.close();
} catch (Exception e) { System.out.println("Error while saving: " + e.getMessage()); }
}

Sorry, I did it wrong the first time. Thanks for your help! I changed the structure, and I made SSCCE! =) Now it work
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.table.*;
public class shortJTE {
public static void main(String[] args){
SwingUtilities.invokeLater(new Runnable(){
   public void run(){
    new dk_MF();
class dk_MF{
JTable tab;
JFrame win;
JFileChooser fc;
int i = 0;
dk_MF(){
win = new JFrame("Java Table Editor");
win.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
win.setJMenuBar(makeMB());
win.setSize(410,220);
win.setVisible(true);
fc = new JFileChooser();
tab = new JTable();
tab.setPreferredScrollableViewportSize(new Dimension(400,200));
tab.setFillsViewportHeight(true);
tab.setAutoCreateRowSorter(true);
JScrollPane jsp = new JScrollPane(tab);
win.getContentPane().add(jsp);
win.pack();
public JMenuBar makeMB() {
JMenuBar mb = new JMenuBar();
JMenu lev1men = new JMenu("File");
JMenuItem lev2men = new JMenuItem("Open");
lev2men.addActionListener(new ActionListener(){
   public void actionPerformed(ActionEvent e) {
    tab.setModel(new Model(i++));
lev1men.add(lev2men);
mb.add(lev1men);
return mb;
class Model extends AbstractTableModel {
private String[] columnNames = {"Item","Number"};
private Object[][] data = {{"Beer","0"},
{"Rum","10"}};
public int getColumnCount() { return columnNames.length; }
public int getRowCount() { return data.length; }
public String getColumnName(int col) {
   return columnNames[col];}
public Object getValueAt(int row, int col){
   return data[row][col];}
public Class getColumnClass(int c) {
   return getValueAt(0, c).getClass();}
public boolean isCellEditable(int row, int col) {
   if (col < 2) { return false;} else { return true; }}
public void setValueAt(Object value, int row, int col) {
   data[row][col] = value; fireTableCellUpdated(row, col); }
Model(int newv) {
   setValueAt(new Integer(newv),1,1);
   setValueAt(new Integer(newv*newv),0,1);
}

My phone locked by somebody. and authority of apple not wish to help me.i can't reach them.help me !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

i wish to produce proof of buying iphone. but apple even not response of if. whether there is an available address?. ......... .

What do you expect Apple to do??
Did you active 'Find My Phone' using your Apple ID??
MJ

*Help Needed* Adding multiple emails/mailing list in the email subscription

Help Needed
Hi,
Can someone help me in adding multiple email address/mailing list in the email subscription for interactive reports in Apex 4.
pls mail me at [email protected]
Regards,
Sunny

The doc does not mention a separator for the email addresses because we only support one email address per subscription. I have logged a task for our next release to look at expanding it and allowing multiple.
-- Sharon

I have applied to the iTunes affiliate program and received my affiliate token successfully. However, I want to use the web iMix, however I need a web developer identifier and secret phrase. I can't reach the web i mix affiliate program! Can anyone help??

I have applied to the iTunes affiliate program and received my affiliate token successfully. However, I want to use the web iMix, however I need a web developer identifier and secret phrase. I can't reach the web i mix affiliate program! Can anyone help??
You can find the full description here: http://www.apple.com/itunes/affiliates/resources/documentation/itunes-store-web- imix.html
I have sent an email for weeks now to the e-mail shown here http://www.apple.com/itunes/affiliates/resources/ and haven't had a single response from them. PLEASE HELP!!
Thank you!

Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David

Can someone please help me figure out why I keep getting the "can not reach server" when I try to download the ebook? This is happening with Adobe Digital Editions.

When I try to download the ebook I bough, the Adobe Digital Reader shows the following message: "can not reach server". Can someone please help me with this?
TO be precise, it says "licensee server communication problem"
Thank you

The thread running through your explanation has to do with connectivity to your server. (iCloud out of the blue asking for password, unable to message your boyfriend, unable to access e-mail). You said that you boyfriend restart his device and then the two of you were able to then imessage. My best advice for you would be to go to settings to reset to reset network settings. Once this has been done you then will need to enter the name and password of your wifi. ONce this is done you then can attempt to check to see that all passwords are enter correctly.
Good luck.

I can't reach the firefox home page, I'm stuck on the tutorials, and I need to access my flash settings for firefox mobile. What do I do?

Basically I need to reach my firefox settings, so that I can automatically enable flash for every website. But I can't reach the settings, and every route that involves firefox leads me back to a tutorial -_-. I really need help.

Yeah, what phones model you used ?
To enables flash in firefox for android
# just go to Menu > More > Setting
# Tap Plugins in the Content section. The Plugins context menu appears.
# To enable Flash to play for all websites by default, tap Enabled.
# To disable plugins for all websites, tap Disabled.
I am sorry if i am wrong, please let us know your problem :D

Help Needed! T60 can't reach internet

Similar Messages

Maybe you are looking for