Help Needed to learn Customer Master

Hi,
I need to learn Customer master in order to work on a assignment in SAP MDM. Can anyone help me with relevant information to start learning Customer Master in SAP and the maping between SAP ECC and SAP MDM.
Thanks in advance.
Regards
Girish Nair

Dear Girish,
Thanks for the links...
I found below notes...
1255401     MDM Material Content Information (Release 5.5)     26.02.2010
1355137     MDM Material Content Information (Release 7.1+)     26.02.2010
1252846     MDM Product Content Information               26.02.2010
1268212     MDM Employee Content Information          26.02.2010
1035773     MDM Business Partner Content Information     26.02.2010
1252884     MDM Customer Content Information (Release 5.5)     26.02.2010
1412742     MDM Customer Content Information (Release 7.1+)     26.02.2010
1252883     MDM Vendor Content Information (Release 5.5)     26.02.2010
1318478     MDM Vendor Content Information (Release 7.1+)     26.02.2010
1029357     MDM 5.5 SP05 Product Repository Information     15.06.2007
1088786     MDM 5.5 SP06 Product Repository Information     27.11.2007
989939     MDM 5.5 SP04 Product Repository Information     31.10.2006
I was interested in the attached excel's in these links which shows MDM - IDoc - ERP field mappings...
Thanks & Regards,
Shaailesh.

Similar Messages

Help Needed to learn Material Master

Hi MDM Gurus,
I need your help. I have gone through all the MDM toots like console, import manager, data manager and syndicator.
I have assigned a task to work on MDM Material Master. But i have no experience in that.
Please tell where should i start to have a strong base in Material Master. Please post the documents related to Material Master which will be useful. Thanks in Advance.
Regards
Ashok

Ashok,
If you are using MDM 7.1 version refer, SAP Note 1355137
which contains very useful information as attachments:
MDM71_Material_Content.pdf
MDM71_Material_Fieldmapping.zip
MDM71_Material_Content_Strings.zip
If you are on MDM 5.5 version refer, SAP Note 1255401
MDM_Material_Content.pdf
FieldMapping_CheckTables_Material.zip
Kindly go through these SAP Note and attachments as per your MDM Version.
Thanks and Regards,
Mandeep Saini

Need help in BDC for Customer master change

I have an interface for Changing Customer master data and I am using BDC for that. I have three scenarios:
1. Insert new data.
2. Change the existing data.
3. Delete the existing data.
The BDC is working fine in the first two scenarios, but if i want to delete an the existing data, lets say for e.g. Name3 or Email Id its not working because i need to pass the value as blank in the BDC for this field.How would i check? i thought i would first get the existing value in customer master and check if the interface value is blank then make this field value to blank in BDC.
But this is not working because in case the interface wants to remove only the email id, the other fields would still be blank.
How to handle this scenario, please advice.

What is the difference between 2 and 3? Isn't "deleting data" in your context the same as changing to a blank value?
Why can you not just fill the value as received in the input data into the BDC data?
Thomas

Need to export customer master data in a batch input file

Hello all,
I'm searching for a solution to export customer master data out of a R/3 system (Release 470).
The challenge is that the file must have the same structure like the file for batch input of customer master data (import file of the program RFBIDE00).
So, has anybody an idea, if there is a standard tool to get such a file? Or has anybody developed a report creating this structure by his own?
Thanks for your help,
kind regards,
Dietmar

Hi,
I have also come across the same problem as above. There is a standard program RFBIDET0 which has to be customized to get the file which can be uploaded to RFBIDE00. Do anybody come across this kind of problem before and have a program already. It will be of great help, if you can forward the program or guide.
Regards,
Vishnu Priya

Help reqd for Tcode - Customer master

Hi all,
What is the t-code to get all the datas of Customer Master available in my SAP system.So that, i can export the same into my excel sheet file.
i tried in XD03 and table KNA1...both are not working out.
in KNA1 it's loading the datas to excel by screen/list wise which is showing in the
table list screen.
I want all the datas in can be viewd in the system and same also be loaded into excel file. (like MM60 for materials and MKVZ for vendors).
Pls do the needful.
thanks & regards
sankar.

Dear Sankar,
Kindly use T.Code "S_ALR_87012180" to get the customer master data.
Regards,
Bijal Shah

Help needed with GTS Material Master

Hello Dear Experts,
My probelm is any changes to GTS Material Master lands in the table ZSLO_PRODUCT_TMP ( this is a temporary table created to store material number ), my requirement is only changes to EUACE (Classification Tab) and EU428 (Legal Control tab) should be updated to table zslo_product_tmp.
I tried to find userexits or badis but no luck. any help?
regards.

Hi
Since it is your custom developed table, you need to follow it up with your ABAPer.
Best Regards,
Shiva

Urgent help needed in creating customer ship_to and bill_to site id

Hi,
I am using an api to create customer ship_to and bill_to address, in Oracle OM R12 but the api does not return values. I am including the code so any suggestion will be helpful.
declare
l_num_billing_site_use NUMBER;
l_num_cust_site_id NUMBER;
l_rec_cust_site_use apps.Hz_Cust_Account_Site_V2pub.CUST_SITE_USE_REC_TYPE;
l_rec_customer_profile apps.Hz_Customer_Profile_V2pub.CUSTOMER_PROFILE_REC_TYPE;
l_chr_retcode VARCHAR2(20);
l_chr_errbuf VARCHAR2(200);
l_num_count NUMBER;
begin
-- fnd_global.apps_initialize (1885, 21623, 660); -- user id, --resp_id (OM Super User), appl_id
-- mo_global.init ('AR');
-- mo_global.set_policy_context ('S', 511);
l_rec_cust_site_use.site_use_code := 'BILL_TO';
l_rec_cust_site_use.cust_acct_site_id := 24919;
l_rec_cust_site_use.primary_flag := 'N';
l_rec_cust_site_use.created_by_module := 'CONVERSION'; -- Change
BEGIN
apps.Hz_Cust_Account_Site_V2pub.create_cust_site_use( p_init_msg_list => FND_API.G_FALSE
, p_cust_site_use_rec => l_rec_cust_site_use
, p_customer_profile_rec => NULL --l_rec_customer_profile
, p_create_profile => FND_API.G_FALSE
, p_create_profile_amt => FND_API.G_FALSE
, x_site_use_id => l_num_billing_site_use
, x_return_status => l_chr_retcode
, x_msg_count => l_num_count
, x_msg_data => l_chr_errbuf);
EXCEPTION
WHEN OTHERS THEN
FND_FILE.PUT_LINE(FND_FILE.LOG,' Unexpected error creating customer site for Cust Site Id ' || l_num_cust_site_id || ' due to: ' || SQLERRM);
END;
dbms_output.put_line('cust_site_use:'||l_num_billing_site_use);
end;
Thanks,
Srinivas
Edited by: user2138419 on Feb 14, 2010 4:46 PM

It might be a crossdomain.xml problem.
Please make sure that the server hosting the xml allows the domain where the swf is hosted.
You can start with:
<?xml version="1.0" encoding="utf-8" ?>
<cross-domain-policy>
<allow-access-from domain="*"/>
<site-control permitted-cross-domain-policies="master-only"/>
</cross-domain-policy>

Help needed in writting Customer exit - ABAP Code

Hi Friends,
I have a scenario in one of the query and need to write a customer exit for the same. Here is the scenario:
I am using one input variable XXX to get input from user which feeds value to one of the charateristic lets say "CHAR1" in query. I have one more characteristic "CHAR2" which has to get the value from the same variable XXX. This is not allowed in BI7.0 as the variable is Hierarchy Node type. It gives error that "Variable XXX is used for two different characteristics."
So i need to create one more vaiable YYY which will get the value from XXX and then YYY will feed value to CHAR2. I would appreciate if some one could tell me step by step how to write customer exit and give me the piece of ABAP code i need to write in my case.
Your help will be appreciated in terms of points.
Thanks,
manmit

Hi Arun,
1. What should CHAR2 take - Hierarchy node variable or something else ?
--> CHAR2 is a simple charateristic
2. In your scenario - why have CHAR1 and CHAR2 ? why not have the user enter values against CHAR2 ??
--> We dont want user to enter two input as the input values for both Chars are same.
3. Did you try using a replacement path variable with the CHAR2 variable taking values from Variable on CHAR1 ?
--> In BI7.0 replacement path variable only take values from Query results. So not able to do the same.
Thanks

Help needed in learning the basics of Java Smart Card and implementation?

Hello every body,
I am trying to develop the applications on java contactless smart cards technology.
Can any body give me the details like how to start?
What are the required softwares and installation procedure and path settings and etc.?
I am the beginner in java smart card application development.
plz help me out

Dear Friend,
I would advice to divide learning into two main parts: JavaCard technology and contactless RFID cards. For JavaCard technology you can find useful articles on Sun web-site (developers.sun.com/mobility/javacard/articles/javacard1/). For contactless RFID you can find few useful books at Amazon. Regarding software you need JC development kit. How to install it there is an instrunction in JCDK user guide.
If it is not a secret what a javacard contactless card you are going to use in your work?
Yours
Dmitri

Help needed to learn BPM

hi all,
I need some links to learn more in oracle BPM.
i am just beginner. so i tried with al examples that are there in help manual.
so i need more documents to learn.

Here's a link on how to download the Tutorial:
Re: Learning Oracle BPM
The tutorial has a few issues. This link might help you work through them:
Re: Links for Oracle/Al BPM
Here's a link to a few other links you might find useful as you get started:
Re: Links for Oracle/Al BPM

Workflow help need urgently in Material Master creation

hi All
I am trying to create a Workflow for creating Material Master views in ECC6 system . Initially Basic data 1 and basic data 2 is created by user and then my workflow is trigerred for subseuqent views .For e.g i need to route the workitem to a user to fiill in Purchasing data and then to another user to fill in accounting data after basic data 1 and basic data 2 is created by so called super user. I was trying to use business object BUS1001006 for this using method CREATEVIEWS but i am getting stuck here with using this method . I dont know how to use this method so that once the user clicks the workitem it should directly go to Puchasing tab view or Accounting tab view (depending on the kind of user currently accessing the workitem).
Any idea how to solve this problem ? It would really be helpful for me
Thanks for your help in advance

1. I have entered transaction OMS9
2. Entered the Field selection group as 2
3. Below the fields option 3 RM03M-WERK280 (Plant) i double clicked and checked there is hide option.
4. I came back selected the T001W - Name1 (Name) I double clicked that in 34 , 35 , 54 was enabled with hide i changed to opt entry but still it seems to be the same.
5. I came back again and below in the field selection tab checked for the MM01 and MM02 transaction as well as fert,halb,roh as opt entry
It did not work.Kindly guide me if there is some other option available for this to revoke the plant option.
Any help would be really appreciatable.
Regards,
Deepak GS

Help need to learn how to do this?

1. Name, which has fields:
    - String lastname
    - String firstname
2. Address, which has fields:
    - int stnum
    - String street
    - String city
    - String postalCode
3. PassengerRecord, which has fields:
    - int passengerID
    - Name passengerName
    - Address passengerAddr
4. Passengers, which has fields:
    - int numpassengers
    - PassengerRecord[] passRecords
5. TrainStation, which has fields:
    - String trainStationName
    - Address trainStationAddr
    - Passengers passengerRecs
The main routine, in class MainClass, MUST look like this:
public static void main(String[] args){
TrainStation station = new TrainStation();
station.readIn();
System.out.printf("station=%s",station.toString());
}//main
which creates an instance of class TrainStation,
then calls the readIn() function of that TrainStation object which will:
1. read in the trainStationName, which is a String
2. read in the trainStationAddr, by calling trainStationAddr.readIn()
3. read in passengerRecs, by calling passengerRecs.readIn() which
    reads in the number of PassengerRecord objects and
    creates the array passRecords.
    Then, passengerRecs.readIn() calls readIn() on each
    passenger record in array passRecords, which will
    in turn read in the passengerID,
    and call passengerName.readIn(), and passengerAddr.readIn()
After calling station.readIn(), main will print out all of
the contents of the TrainStation object pointed to by printing
station.toString().can someone help me learn this fast like any places where i can read and learn how to do this?

javakingloww wrote:
can someone help me learn this fast like any places where i can read and learn how to do this?Assuming you went to class and payed attention, I would review the notes you took during class. Otherwise I would review any handouts or online material available that saved you from writing notes that day.
Mel

Need to Create Customer Master Data under Multiple Sales Areas

Hi Gurus,
         My requirement is to create a customer under multiple sales areas by processing the Inbound Idoc function module "IDOC_INPUT_DEBITOR"( After generating Outbound Idoc and outbound is processed successfully).
         But, when I am trying to send the multiple sales areas information in segment "E1KNVVM". It is creating the customer under first sales area filled in first E1KNVVM segment and it is giving error that "Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1" and it is not creating the customer under other sales areas.
        Following are the details of the Outbound Idoc which I have processed.
        Idoc Basic type : DEBMAS06
        Message          : DEBMAS
        I have filled required fields in E1KNA1M and E1KNVVM segments. But filled E1KNVVM segments twice with different sales area data.
      Please help in solving this problem?

is it really just one IDOC?
I have never seen that SAP just does a part of one IDOC.
the structure of DEBMAS ist like this:
E1KNA1M
--E1KNVVM
E1KNVPM
E1KNVDM
E1KNVIM
--E1KNB1M
which means for your example it should be like this
E1KNA1M
--E1KNVVM
E1KNVPM
E1KNVDM
E1KNVIM
--E1KNVVM
E1KNVPM
E1KNVDM
E1KNVIM
--E1KNB1M
and in this case I am very certain that it would never just process and create the part for one sales area.
Maybe your customer already exists from ealier tests with just one sales area.
Display your IDOC in WE02 or WE05 and make sure you have a value in name1 field

Help needed in adding custom About box in built application in LabVIEW 2009

Hello,
Can anyone please help me add custom About box in built application in LabVIEW 2009? I had successfully built my application in labview 8.6, 8.5 and 8.2 before to include custom About box. However, when I tried the same method in LabVIEW 2009, it only showed LabVIEW 2009 About box rather than my custom About box.
Here is what I did:
1) Wrote an "About Application.vi" in the built VI folder;
2) Included this "About Application.vi" in the "Always Included" section of Source Files in Application Build;
3) Built the application;
4) Ran the built application, the About box showed only LabVIEW 2009 about (attached a picture).
You can see that on the upper left corner of the picture, there is my custom icon.
Your help is greatly appreciated,
Cathy
Solved!
Go to Solution.
Attachments:
About Box.JPG ‏34 KB

Here is the link to download LabVIEW 2009 f2 patch:
http://digital.ni.com/public.nsf/websearch/C3F88F3596A164AD86257647006FB022?OpenDocument
Thanks for the help,

Help needed in writing custom views for rendering new HTML tags

Hi
I am in the process of making a sort of HTML editor using the JEditorKit and all,now i need to write a view which will display bi-directional text(text in reverse order),well i am not being able to get to the test at all,i don't know how to get to the text in the element being supplied to my ViewFactory.
Anyone who knows anything about what i am talking here please help me,i am open to any suggestion,anything,i am in a real mess here,please help

Hi,
You dont need any coding to set the changed value back to the context attribute.
Since you have mapped the context attribute in the DisplayView and EditView to a context attribute of component controller. So after viewing the name in your DisplayView when you navigate to EditView onActionChange,you can change the value.When you cahnge the value and submit the new value that is entered is update across the component controller and DisplayView context.
To see this create a action onActionSubmit in EditView and navigate to the DisplayView, you will see the updated value.
In webdynpro framework when the value of a context attribute is changed, then the value gets updated across all views to which the context attribute is mapped.

Help Needed to learn Customer Master

Similar Messages

Maybe you are looking for