Help needed to retrieve missing messages and folders; though items still present

Something happened, but I am not sure what.
TB had difficulty loading, and then afterwards one of my folders [ a sub-folder of Inbox ] was duplicated, and all of its sub-folders were missing.
if I search for a keyword to locate a message w/in on of the sub,sub folders , I find the messages ARE listed in the results panel, and the filter dialogue on the left side lists the folder name [ that is missing ] that they were in. However if I click on the message to load it in a new tab, the tab is blank
I tried the 'properties;repair folder' but I get only a 'busy' symbol [ spinning green circle ] and no eventual change.
Help!

Hi Essjay32,
Welcome to Nokia Support Discussions!
What you could do is to install the latest Nokia Suite beta, which can upload your contacts to Skydrive. When you get your Lumia 900, you can just use that Microsoft account as your main account and the contact data should be there waiting for you. Unfortunately, it is not possible to transfer your messages to a Lumia phone, you can however store your existing messages on Nokia Suite.
When connecting your phone to your computer (using a USB cable), press the menu button, as it will set up your phone in Nokia Suite mode. After this you should be able to access your phone data and upload it to Skydrive.
Hope this helps!
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Similar Messages

Is it possible to retrieve missing files and folders from lightroom?

Can anyone help me please? I was in the process of editing a folder took a break for dinner. I did the normal close the window ( it did not ask me to back up sometimes it does and sometimes it doesn't ) and then shut off my computer. I turned it back on and opened Lr and my last 4 photo sessions are gone ! This is the 3rd time this has happened to me, if i wasn't almost 50 images into this edit id say nbd but i've shown sneak peek previews of already edited images that she'll be expecting off her 7 yes 7 children 3 of which are premie identical triplet boys. They are a one in a million senario i dont want to be responsible for any disappointment to this lovely family! Please help me if you know how i cant imagine starting over on this one!

LR normally performs a catalog backup unless you changed it. That backup would be in the "Lightroom" folder in My Pictures, again unless you previously changed it. Go to the Catalog settings > general. This will tell you how often the catalog is backed up. Click the "Show" button to see where the main catalog is. Open that folder and you should see a "Backup" folder. If your LR has been set to periodically backup, you should see the latest backup catalog. This may be what you will need to use if the main catalog is indeed missing. The latest session may not be there, depending on how often your LR was set to backup.

Troubleshoting help needed: My iMac keeps crashing and restarting with a report detail: "spinlock application timed out" What can I do to fix this?timed out"

Troubleshooting help needed: My iMac keeps crashing and restarting with a notice: "Spinlock application timed out" What can I do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

I have deleted all photos, messages and apps but I still have no available space on my phone even though the applications don't add up to 12 GB.. Please help!!!

I have deleted all photos, messages and apps but I still have no available space on my phone even though the applications don't add up to 12 GB.. Please help!!!

You have data corruption. restore your phone and set it up as a new device. Not from backup

How can I scroll messages and folders in Mail with Maverick? It's unacceptable for Apple

How can I scroll messages and folders in Mail with Maverick? It's unacceptable for Apple to have allowed this to happen

This problem has been discussed extensively in this thread:
https://discussions.apple.com/thread/5481937?start=0&tstart=0

Help me for activate I message and facetime ! iOS 7(7.1.2) iphone 4 ! Urgent plss help !

Help me for activate I message and facetime ! iOS 7(7.1.2) iphone 4 ! Urgent plss help !

Hello Mohd,
Thank you for using Apple Support Communities.
Sorry I couldn't get to your issue quicker, but the following article should help you to activate your iMessage and FaceTime:
iOS: Troubleshooting FaceTime and iMessage activation
Regards,
Jeff D.

Need to retrieve deleted messages/conversations for desktop and web

someone has deleted messages and conversation from my yahoo email and facebook accounts, as well as to my desktop??? Can i find them-get them back??? also, how do i "check out " my computer for hidden-well hidden anything!?!folders/documents/tasks
HELP PLEASE!!!

I found a web site that said there was a program that you can use to retrieve them.
Here's the link
http://riactant.wordpress.com/2009/05/02/retrieving-deleted-text-messages-from-y our-iphone/

I need an app to lock my messages and folders for free

i need an app to lock my text messge with passcode and other apps\ folders to lock with an password..
i need to know how to activate delivery reports for sent text messages, spam folder s also needed.. even in a basic mobil its present .. so plzzzzz help.
then only i can recommend others to buy iphone

Well, Brinda, currently there is no way to lock your messages or folders except by using a basic passcode lock on the phone itself.
For dilevery reports, you need at least iOS 5 and go to settings > messages. It is only possible to get these reports for messages sent to other i-devices.
As far as a spam folder, could you elaborate?

Help needed, M getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem but instead I cannot login I to my itune account.

Help needed,
I am getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem , and i triyed it but still I cannot login I to my itune account. Same message keeping. Popping up, this problem started supricly today.

Take a look at the instructions here.
http://www.technogal.net/2012/03/this-is-not-test-user-account-please.html

TB stopped retrieving new messages and trying to "reconfigure" my account to fix the problem, now I lost my old messages.

[4/15/14 edit #3] I posted the requested troubleshooting information and made a backup of Profiles using MozBackup, so my remaining problem is the presence of two Inboxes, both receiving messages, and my not being sure which one can safely be deleted nor how to safely delete it.
[4/14/14 edit #2] T'bird's Help taught me where my "Profiles" are stored but I found I had no backup of them. However, I now discover that I have TWO Inboxes - hadn't noticed that quirk before. Thankfully, one of them still contains all of my old messages! The Inbox that still has all of my old mail is listed as a subfolder under "Local Folders" and the Inbox that I thought was my only Inbox is listed as a subfolder under the top folder whose name is my email address. Both Inboxes are now retrieving my new mail. Does this mean I have somehow created two accounts? If so, how do I get rid of the account that uses the Inbox that does not have all my old mail in it? I don't want to get rid of the wrong account but I suspect the "right" one should be listed under my email address, not under "Local Folders". If anyone understands this mess that I've created, I'd really appreciate some advice so I don't make things worse. At least I've now learned what it is that I need to back up.
[4/14/14 edit #1] Following is a major update of the problem I described before (see below). I disabled the Mail Shield portion of my Free Avast antivirus software and discovered that TB was again able to retrieve my email. Then I re-enabled Avast to see if it blocked TB again. It did not. So, apparently simply turning Avast's Mail Shield off and then back on again seems to have fixed the problem. However, I'm now left with the consequences of my having tried to "reset" TB as I described below, namely the loss of a very large number of emails that were stored in my Inbox. So the remaining problem I'd like help with is how to recover those seemingly lost emails. If they remain on my hard drive, where did TB store them and what specific files should I look for? I do have a backup of some of my hard drive (but nothing under Program Files), but I need to know how to identify them, where to look, and how to get them back into my Inbox without deleting its current contents. I'd really like to also retain their original dates, if possible. I'm running 64-bit Windows 8.1. [end of 4/14/14 edit]
TB suddenly stopped downloading my mail today. After I click Get Mail, I can see at the bottom of the screen a very rapid succession of messages; first the "connected..." message, then "checking...", then "downloading 1 of 10...", then finally, "No messages to download" after downloading absolutely none of them. I also noticed that my list of mailboxes was missing the very first entry that showed my email address as the account name. Figuring something major must have been changed in my account configuration, I went through all the settings but saw no problems. Finally, I decided to try to re-establish my same account. That did place my email address again back at the top of the mailbox listings as my working account name but it also created a worse problem. There were now no messages in my inbox, I suppose because I must have created a new account using the same name as the old one, whereas before there were thousands of messages that I had saved for many years (since this is a business). Then when I clicked Get Mail, TB downloaded 383 messages that had not yet been deleted from the server, giving then all today's date (another loss since their original dates were important). But after it finished downloading all of them, clicking Get Mail still does not retrieve any messages past the time that it stopped retrieving them earlier today. Those newest messages remain on the server - but now there are 14 of them instead of 10. The same succession of TB messages appears at the bottom of the screen, but now it says "Downloading 1 of 14..." but still downloads none of them and ends with, "No messages to download". This sequence of messages will repeat as often as I try to retrieve mail but it can still count how many it is NOT downloading. Two questions: (1) Are the thousands of messages that were stored in my Inbox still stored somewhere on my computer and is there any way to recover them? (2) How can I get TB to start retrieving my current email again? I guess it's obvious that these are important problems to me and that I'm totally stumped. Many thanks in advance.

Sorry. Here is the Troubleshooting Info:
Application Basics
Name: Thunderbird
Version: 24.4.0
User Agent: Mozilla/5.0 (Windows NT 6.3; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.4.0
Profile Folder: C:\Users\Phil\AppData\Roaming\Thunderbird\Profiles\p8gz2q23.default
(Local drive)
Application Build ID: 20140316131045
Enabled Plugins: about:plugins
Build Configuration: about:buildconfig
Crash Reports: about:crashes
Memory Use: about:memory
Mail and News Accounts
account1:
INCOMING: account1, Local Folders, (none) Local Folders, plain, passwordCleartext
account2:
INCOMING: account2, [email protected], (pop3) pop.att.yahoo.com:995, SSL, passwordCleartext
OUTGOING: smtp.att.yahoo.com:465, SSL, passwordCleartext, true
OUTGOING: smtp.att.yahoo.com:465, SSL, passwordCleartext, false
account5:
INCOMING: account5, [email protected], (pop3) inbound.att.net:995, SSL, passwordCleartext
OUTGOING: outbound.att.net:465, SSL, passwordCleartext, true
Extensions
Check for Updates in Help Menu, 1.1, true, [email protected]
CompactHeader, 2.0.8, true, {58D4392A-842E-11DE-B51A-C7B855D89593}
Remove Duplicate Messages (Alternate), 0.3.9, true, {a300a000-5e21-4ee0-a115-9ec8f4eaa92b}
ViewAbout, 2.0.1, true, [email protected]
Extra Folder Columns, 1.1.5, false, extra-cols@jminta_gmail.com
Important Modified Preferences
Name: Value
accessibility.typeaheadfind.flashBar: 0
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.disk.smart_size_cached_value: 358400
extensions.lastAppVersion: 24.4.0
mail.openMessageBehavior.version: 1
mail.winsearch.firstRunDone: true
mailnews.database.global.datastore.id: 9bbfa749-eb91-4c2e-9a9a-d0e0146e393
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1397067237
places.history.expiration.transient_current_max_pages: 52770
places.history.expiration.transient_optimal_database_size: 85415034
plugin.importedState: true
privacy.donottrackheader.enabled: true
Graphics
Adapter Description: Intel(R) G45/G43 Express Chipset (Microsoft Corporation - WDDM 1.1)
Vendor ID: 0x8086
Device ID: 0x2e22
Adapter RAM: Unknown
Adapter Drivers: igdumd64 igd10umd64 igdumd32 igd10umd32
Driver Version: 8.15.10.2702
Driver Date: 3-11-2013
Direct2D Enabled: false
DirectWrite Enabled: false (6.3.9600.16384)
ClearType Parameters: Gamma: 2200 Pixel Structure: RGB ClearType Level: 100 Enhanced Contrast: 100
WebGL Renderer: false
GPU Accelerated Windows: 0
AzureCanvasBackend: skia
AzureFallbackCanvasBackend: cairo
AzureContentBackend: none
JavaScript
Incremental GC: 1
Accessibility
Activated: 0
Prevent Accessibility: 0
Library Versions
Expected minimum version
Version in use
NSPR
4.10.2
4.10.2
NSS
3.15.4 Basic ECC
3.15.4 Basic ECC
NSS Util
3.15.4
3.15.4
NSS SSL
3.15.4 Basic ECC
3.15.4 Basic ECC
NSS S/MIME
3.15.4 Basic ECC
3.15.4 Basic ECC
ISP is AT&T, anti-virus is (free) Avast, Windows firewall

Missing messages and other recent Mail.app quirks

HI,
Although I've read through many post on this issue, I haven't found one that seems to apply to my situation. And, the process seems really confusing... so I thought I'd ask you guy's.
I rebuilt my inbox's last night, and:
1. 1 of my 2 POP inbox's is now empty (except for a couple new mails today). There were about 150 messages.
2. My .mac inbox is receiving mails, but first the little spinner thing wouldn't stop spinning, and has switched to a blue clock looking thing that's stuck at about 10:30 (may have moved to 11:00 now?).
3. Drafts don't seem to be saving.
4. Seems that the audio feedback is gone or was gone (the sound is up and the speakers to work).
5. I was getting a strange error message when sending that I didn't write down (something to do with the Trash and 0 space or something).
I've been on this new machine (OS 10.4.5) since November with no Mail.app (2.0.7) trouble at all (I moved from a TiBook that had once had Panther on it). And, I didn't let this last Security update install. I had been trying to resolve some POP SMTP server issues, but went with .mac with the "reply to" option (I'm stuck in a hotel in southern China), and I did lose one email that I had just sent... which prompted the rebuild of the mailbox's. Still can't find that missing email- but I did get a reply from the person I sent it to.
There weren't many messages in that now empty inbox, but they were the important ones (which I think I located in Library > Mail folder thanks to you folks).
I can survive with issues 2 - 5 above if necessary, but I'd really like to deal with the missing message problem.
Should I just "import mailbox's" back in and hope it all works? Will I lose those new mails from today? Can you offer me any advice?
Sorry if I rambled on too much (too much spare time on a Sunday morning in China), and thank you in advance for any thoughts,
Guy

Guy,
Different answers for each file. The CachedData1 is a leftover file from an IMAP or .mac account -- Mail no longer uses that method of caching, so delete.
The two MessageUidsAlreadyDownloaded are used with each POP account, and are still valid file types -- however, one of them should be modified each time you access your POP server -- check the dates modified again.
The two files named to begin with Incoming are leftovers, and probably must simply be deleted. They resulted in the mailbox where you found them when a message had been received (even if by transfer) and that mailbox was not opened prior to the conversion. In Panther, and earlier, these files would disappear when the mailbox was opened to view. It probably is only one or two messages -- the Incoming_Mail file can be read with TextEdit to confirm.
I think the Envelope Index Journal results during an incomplete indexing attempt Mail has made at some point, was meant to be temporary -- I am not entirely sure about this, but I do not have one.
The time out on port zero is one I need to research -- although I have seen a few reports, and think there is some explanation, I cannot remember as I write this.
There is an ongoing issue with .mac and continuation of the indicator for activity -- I see this on my iBook G4, but not on my G5. Useless needed for Offline use, set Mail Preferences/Accounts/Advanced to Don't save all message and attachment for Offline viewing, which may help. I hope this one get addressed in some future update.
Ernie

JMS Configuration Help Needed for Publish Subscribe Messaging

Hi,
I am new to JMS and need help to configure JMS from the sun admin console. As of now i have configured the topic and the connection factory from the JMS Resources under the Resources tab(here too i just specified the topic name and guest and password and jndi and similarly the connection factory name but have not specified any port or anything else), but i guess something is missing as i can publish but cannot subscribe nor can i view the messages on the topic..I think some sort of configuration is also need on the Java Message Service header under the Configuration tab.I have searched for this on the net but have not been able to find any sort of detailed help.If someone could give a detailed picture as too how to go about this configuration with an example it would be of great help.
Vaishali Shah

Sai,
Seen this:
http://tinyurl.com/pbshe
Good Luck,
Avi.

Track Pad Not Working Need To Retrieve Text Messages

I need help please if somebody can explain to me in terms for dummies on how to retrieve my messages I would really appreciate it.

Hi and welcome to the forums M2Fellows!
A couple of places for you to visit: Blackberry 101 Tips & Tricks
Try pulling the battery out with the device ON. Wait about a minute and put the battery back in. Let the BB completely restart and see if that doesn't help. Clears out the memory and refreshes the BB; like rebooting your pc. When you have anomalous behavior in your BB a battery pull often helps to clear it up too.
Happy to have you here!
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Urgent help needed!! Layout table and Draw layout cell dissapeared.

I need some urgent help. I'm using CS3 but for a while my
Layout Table and Draw Layout Cell icons appear greyed and can't use
them at all. Is there any kind soul out there who knows how to fix
this? I'm going nuts trying all the possible options but none seem
to work.
Help please!!!!!!

> How would you about designing a page without using html?
You don't. But I don't recall suggesting that you not use
HTML. I just
suggested that you use best-practice HTML, no? Or maybe you
meant to ask
how you would go about building your site without learning
HTML? In that
case, I think you are outta luck. Using DW without knowing
HTML is a very
punishing experience, I'm afraid.
> PS: A virtual box of 12 bottles of Moet Chandon is
already on your way!!
I'd prefer Cristal, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Untersberg" <[email protected]> wrote in
message
news:g4tj9a$m5o$[email protected]..
> Ahhhhhh!!!!! They came up!!!! They came up again!!
> I was on standard mode. Now going back to your
suggestion, which I really
> appreciate. How would you about designing a page without
using html? I'm
> just
> redesigning my website at the moment and need it to get
going urgently,
> hence
> the reluctance to start learning HTML at the moment.
I'll do after but I
> need
> to get this up and running fairly quickly.
>
> Cheers.
>
> PS: A virtual box of 12 bottles of Moet Chandon is
already on your way!!
>

Help Needed - FINAL PROJECT - SAAJ MESSAGING

Hi there!
currently im doing my final project and it involves sending and receiving soap messages.
im working with sun java studio creator for the first time.
i have done this example (excuse me for possible dumb errors im just a noobie):
* Page1.java
* Created on 6 de Novembro de 2006, 12:40
package webapplication1;
import com.sun.rave.web.ui.appbase.AbstractPageBean;
import com.sun.rave.web.ui.component.Body;
import com.sun.rave.web.ui.component.Form;
import com.sun.rave.web.ui.component.Head;
import com.sun.rave.web.ui.component.Html;
import com.sun.rave.web.ui.component.Link;
import com.sun.rave.web.ui.component.Page;
import javax.faces.FacesException;
import com.sun.rave.web.ui.component.Button;
import com.sun.rave.web.ui.component.TextArea;
//soap saaj
import javax.xml.*;
import javax.xml.soap.*;
import java.net.URL;
import java.net.*;
import java.util.*;
import javax.xml.soap.SOAPConnectionFactory;
import javax.xml.soap.SOAPConnection;
import javax.xml.soap.MessageFactory;
import javax.xml.soap.SOAPMessage;
import javax.xml.soap.SOAPPart;
import javax.xml.soap.SOAPEnvelope;
import javax.xml.soap.SOAPBody;
import javax.xml.soap.SOAPElement;
// add this import if you need soapaction
import javax.xml.soap.MimeHeaders;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.Transformer;
import javax.xml.transform.Source;
import javax.xml.transform.stream.StreamResult;
import com.sun.xml.messaging.saaj.*;
import java.net.URL;
import javax.xml.soap.*;
import java.util.Iterator;
import javax.xml.soap.Name;
import javax.xml.soap.MessageFactory;
import javax.xml.soap.SOAPMessage;
import javax.xml.soap.SOAPBody;
import javax.xml.soap.SOAPPart;
import javax.xml.soap.SOAPEnvelope;
import javax.xml.soap.SOAPBodyElement;
import javax.xml.messaging.ReqRespListener;
import java.text.NumberFormat;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.Transformer;
import javax.xml.transform.Source;
import javax.xml.transform.stream.StreamResult;
import com.sun.xml.messaging.saaj.*;
* Page bean that corresponds to a similarly named JSP page. This
* class contains component definitions (and initialization code) for
* all components that you have defined on this page, as well as
* lifecycle methods and event handlers where you may add behavior
* to respond to incoming events.
import javax.xml.messaging.JAXMServlet;
//extends JAXMServlet
public class Page1 extends AbstractPageBean implements ReqRespListener{
// <editor-fold defaultstate="collapsed" desc="Creator-managed Component Definition">
private int __placeholder;
* Automatically managed component initialization. WARNING:
* This method is automatically generated, so any user-specified code inserted
* here is subject to being replaced.
private void _init() throws Exception {
private Page page1 = new Page();
public Page getPage1() {
return page1;
public void setPage1(Page p) {
this.page1 = p;
private Html html1 = new Html();
public Html getHtml1() {
return html1;
public void setHtml1(Html h) {
this.html1 = h;
private Head head1 = new Head();
public Head getHead1() {
return head1;
public void setHead1(Head h) {
this.head1 = h;
private Link link1 = new Link();
public Link getLink1() {
return link1;
public void setLink1(Link l) {
this.link1 = l;
private Body body1 = new Body();
public Body getBody1() {
return body1;
public void setBody1(Body b) {
this.body1 = b;
private Form form1 = new Form();
public Form getForm1() {
return form1;
public void setForm1(Form f) {
this.form1 = f;
private Button button1 = new Button();
public Button getButton1() {
return button1;
public void setButton1(Button b) {
this.button1 = b;
private TextArea textArea1 = new TextArea();
public TextArea getTextArea1() {
return textArea1;
public void setTextArea1(TextArea ta) {
this.textArea1 = ta;
private TextArea textArea2 = new TextArea();
public TextArea getTextArea2() {
return textArea2;
public void setTextArea2(TextArea ta) {
this.textArea2 = ta;
// </editor-fold>/*
public MessageFactory messageFactSent= null;
public MessageFactory messageFactReply=null;
public MessageFactory messageFactReceiv= null;
public SOAPConnectionFactory soapConnectionFact;
public URL URLendpoint;
public SOAPConnection connection ;
public SOAPMessage messageSent;
public SOAPPart soapPartSent;
public SOAPEnvelope soapEnvelopeSent;
public SOAPBody SoapBodySent;
public SOAPMessage messageReceiv;
public SOAPPart soapPartReceiv;
public SOAPEnvelope soapEnvelopeReceiv;
public SOAPBody SoapBodyReceiv;
public SOAPMessage messageReply;
public SOAPPart soapPartReply;
public SOAPEnvelope soapEnvelopeReply;
public SOAPBody SoapBodyReply;
public SOAPMessage reply;
public String StringAux="";
public final String theURI = "http://172.16.5.223:8080/WebApplication1/";
//public final String theURI = "http://172.16.5.223:8080/WebApplication1/";
//public final String theURI = "http://172.16.5.193:8080/WebApplication1/";
//http://localhost:8080/WebApplication1/faces/Page1.jsp
public SOAPMessage onMessage(SOAPMessage message) {
StringAux=StringAux+"On message called in receiving servlet\n";
this.textArea1.setValue(StringAux);
try {
soapPartReceiv = message.getSOAPPart( );
soapEnvelopeReceiv = soapPartReceiv.getEnvelope();
SoapBodyReceiv = soapEnvelopeReceiv.getBody();
//analise...if needed
// Create the reply message
messageReply = messageFactReply.createMessage();
soapEnvelopeReply = messageReply.getSOAPPart().getEnvelope();
SoapBodyReply= soapEnvelopeReply.getBody();
// Remove empty header from the Envelope
soapEnvelopeReply.getHeader().detachNode();
Name bodyName = soapEnvelopeReply.createName("GetLastTradePrice",
"m", "http://wombat.ztrade.com");
SOAPBodyElement gltp = SoapBodyReply.addBodyElement(bodyName);
Name name = soapEnvelopeReply.createName("symbol");
SOAPElement symbol = gltp.addChildElement(name);
symbol.addTextNode("SUNW");
// Return a reply message back to the JAXM client
StringAux=StringAux+"devolveu menssagem\n";
this.textArea1.setValue(StringAux);
return messageReply ;
} catch(Exception e) {
StringAux=StringAux+"Error in processi ng or replying to a message - e: " + e+"\n";
this.textArea1.setValue(StringAux);
return null;
//this.getBean(name)
public Page1() {
// Service serve=new Service();
// Client cli=new Client();
// this.textArea1.setValue(serve.GetAux());
// this.textArea2.setValue(cli.GetAux());
// Create a MessageFactory
try {
URLendpoint=new URL(theURI);
StringAux=StringAux+"depois de criar o endpoint \n";
//Create SOAP connection
soapConnectionFact = SOAPConnectionFactory.newInstance();
connection = soapConnectionFact.createConnection();
// Create a message from the message factory.
messageFactSent = MessageFactory.newInstance();
messageFactReply = MessageFactory.newInstance();
messageFactReceiv = MessageFactory.newInstance();
StringAux=StringAux+"depois de criar as message factory \n";
this.textArea1.setValue(StringAux);
} catch(Throwable e) {
StringAux="erro2!\n"+StringAux+e.toString()+"\n";
this.textArea1.setValue(StringAux);
* Return a reference to the scoped data bean.
protected ApplicationBean1 getApplicationBean1() {
return (ApplicationBean1)getBean("ApplicationBean1");
* Return a reference to the scoped data bean.
protected RequestBean1 getRequestBean1() {
return (RequestBean1)getBean("RequestBean1");
* Return a reference to the scoped data bean.
protected SessionBean1 getSessionBean1() {
return (SessionBean1)getBean("SessionBean1");
* Callback method that is called whenever a page is navigated to,
* either directly via a URL, or indirectly via page navigation.
* Customize this method to acquire resources that will be needed
* for event handlers and lifecycle methods, whether or not this
* page is performing post back processing.
* Note that, if the current request is a postback, the property
* values of the components do not represent any
* values submitted with this request. Instead, they represent the
* property values that were saved for this view when it was rendered.
public void init() {
// Perform initializations inherited from our superclass
super.init();
// Perform application initialization that must complete
// before managed components are initialized
// TODO - add your own initialiation code here
// <editor-fold defaultstate="collapsed" desc="Creator-managed Component Initialization">
// Initialize automatically managed components
// Note - this logic should NOT be modified
try {
_init();
} catch (Exception e) {
log("Page1 Initialization Failure", e);
throw e instanceof FacesException ? (FacesException) e: new FacesException(e);
// </editor-fold>
// Perform application initialization that must complete
// after managed components are initialized
// TODO - add your own initialization code here
* Callback method that is called after the component tree has been
* restored, but before any event processing takes place. This method
* will only be called on a postback request that
* is processing a form submit. Customize this method to allocate
* resources that will be required in your event handlers.
public void preprocess() {
* Callback method that is called just before rendering takes place.
* This method will only be called for the page that
* will actually be rendered (and not, for example, on a page that
* handled a postback and then navigated to a different page). Customize
* this method to allocate resources that will be required for rendering
* this page.
public void prerender() {
* Callback method that is called after rendering is completed for
* this request, if <code>init()</code> was called (regardless of whether
* or not this was the page that was actually rendered). Customize this
* method to release resources acquired in the <code>init()</code>,
* <code>preprocess()</code>, or <code>prerender()</code> methods (or
* acquired during execution of an event handler).
public void destroy() {
public String button1_action() {
try {
StringAux=StringAux+"antes de criar a messagem para enviar\n";
messageSent = messageFactSent.createMessage();
soapEnvelopeSent = messageSent.getSOAPPart().getEnvelope();
//SoapBodySent = messageSent.getSOAPPart().getEnvelope().getBody();
SoapBodySent = soapEnvelopeSent.getBody();
Name bodyName = soapEnvelopeSent .createName("GetLastTradePrice",
"m", "http://wombat.ztrade.com");
SOAPBodyElement gltp = SoapBodySent.addBodyElement(bodyName);
Name name = soapEnvelopeSent.createName("symbol");
SOAPElement symbol = gltp.addChildElement(name);
symbol.addTextNode("SUNW");
StringAux=StringAux+"\nContent of the message: \n"+messageSent.toString()+"\n";
// Send the SOAP message and get reply
StringAux=StringAux+"Sending message to URL: \n"+ URLendpoint+"\n"+this.URLendpoint.getPath()+"\n";
reply = connection.call(messageSent,URLendpoint);
StringAux=StringAux+"\n\n Content of the reply message: \n"+reply.toString()+"\n";
this.textArea1.setValue(StringAux);
//tratamento da resposta
connection.close();
} catch(Throwable e) {
StringAux="erro!\n"+StringAux+e.toString()+"\n";
this.textArea1.setValue(StringAux);
return null;
Very simple , on a click of the button a message was supost to be sent. and receive on the other machine. i have launched the same war file on both pcs
but now nothing happens just a exception message
com.sun.xml.messaging.saaj.SOAPExceptionImpl: java.security.PrivilegedActionException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Invalid Content-Type:text/html. Is this an error message instead of a SOAP
....could someone help me out here ,even share a wprking project with this goal
thank you in advance
DMS
Message was edited by:
DaniDaOne

One time, after quitting IM and re-launching it later, my project disappeared from the project list.
Apple Support told me to do this.
1) quit IM
2) with the finder, move the project out of the project directory
3) launch IM
4) quit IM
5) with the finder, put the project back into the project directory
6) launch IM
My project re-appeared. He said these steps forces a project index to be rebuilt.
Your symptoms are different but maybe the cure is the same --- good luck.

Help needed to retrieve missing messages and folders; though items still present

Similar Messages

Maybe you are looking for