Help needed to solve Biometric problem
Hi, I tried to execute example defined in JCBiometricsAPI_WhitePaper.pdf [which you can get from www.javacardforum.org/03_documents/00_documents/fileload_02.pdf] in biometric supported JCOP31 card. Where they are using password as the biometric template type. And here am able to upload the password into the server applet, but when I try to call the match method defined in the Client applet am getting 6F00 error message. please help me to resolve this.
Does anyone able to execute the example program successfully defined in www.javacardforum.org/03_documents/00_documents/fileload_02.pdf
Similar Messages
-
Help needed in solving a problem, thanks. Code Attached..
Hello All
I am facing a problem working with Berkely DB 4.5.20. I am trying to search in the database whether the key is already present or not. It is working fine with Microsoft Visual Studio but when i use the same code with Code::Blocks editor and MinGW compiler. It is not workig fine.
The code for searching the key is*****
bool CDbProject::IsKeyIndexAvailable(ProjectKey ProKey, UINT DataIndex)
int ret=0;
Dbc *cursorp;
bool flag=false;
cursor(NULL, &cursorp, 0);
//set the key
Dbt key(&ProKey, sizeof(ProKey));
Dbt data;
//search the database for the key.
ret = cursorp->get(&key, &data, DB_SET);
//ret = cursorp->get(&key, &data, DB_NEXT); //Rohit
if (!ret)
{ //if found check if the index is same
do
ProjectDataDetail *myProjDetails;
myProjDetails = (ProjectDataDetail*)data.get_data();
if (myProjDetails->uIndex==DataIndex)
flag = true;
break;
} while (cursorp->get(&key, &data, DB_NEXT_DUP) == 0); //Loop all the duplicate
if (cursorp != NULL)
cursorp->close();
return flag;
And the function to save the data in the database is *******
int CDbHandler::Put(void* pKey, size_t nKeyLen, void* pData, size_t nDataLen)
int ret = 0;
Dbt key(pKey, nKeyLen);
Dbt data(pData, nDataLen);
ret = put(NULL, &key, &data, DB_NODUPDATA);
if (ret==-30996)
ret = ERR_PROJECT_KEY_DATA_ALREADY_EXISTS;
return ret;
Please help...
Thanks in advance,,,
Message was edited by:
user610238Thanks for the reply Sandra
I try to tell what is happening in the search key function, If still not possible, then i will try to create a stand alone application...
bool CDbProject::IsKeyIndexAvailable(ProjectKey ProKey, UINT DataIndex)
int ret=0;
Dbc *cursorp;
bool flag=false;
cursor(NULL, &cursorp, 0);
//set the key
Dbt key(&ProKey, sizeof(ProKey));
Dbt data;
//search the database for the key.
// SANDRA......If i use DB_SET,as you can see below. It is not able to find the key at all. BUt if i use DB_NEXT, then it is able to find the first key only everytime with the data also (Even if i am looking for some other key, it will find the first key saved always..)
ret = cursorp->get(&key, &data, DB_SET);
//ret = cursorp->get(&key, &data, DB_NEXT); //Rohit
if (!ret)
{ //if found check if the index is same
do
ProjectDataDetail *myProjDetails;
myProjDetails = (ProjectDataDetail*)data.get_data();
if (myProjDetails->uIndex==DataIndex)
flag = true;
break;
} while (cursorp->get(&key, &data, DB_NEXT_DUP) == 0); //Loop all the duplicate
if (cursorp != NULL)
cursorp->close();
return flag;
} -
please can you help me to solve my problem ( I have iphone is linked with Apple ID and I forgot that Apple ID and I can't remember it , I need thats Apple ID to activate my iphone ,,, what should I do ?
mohammed aljasim wrote:
there are many people that error is happened with them and one of this people is me ,, Apple must be find the solution for this problem
You are absolutely WRONG. Apple bears no responsibility in this at all. YOU purchased a STOLEN phone. You are guilty of receiving stolen property at best. Take it back to wherever you bought it and demand a refund. Failing that, turn it over to the police. You got ripped off. I'm sorry you wasted your money, but there is NOTHING Apple or anyone else can do for you. Only the rightful owner of the phone can unlock it. -
We have 'CS6' version of Adobe. We are facing a problem with 'Acrobat Pro'. Every month that is stop working and everytime need to install. Kindly help us regarding solving this problem...
Your Acrobat is running in Trial Mode. Try this KB: Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
If it doesn't work you need to contact Adobe Support for assistance. -
I desperately need to solve this problem even geeks on call could not
I desperately need to solve this problem
Posted: May 17, 2006 5:29 PM Reply Email
How to Connecti computers over the internet using IP addresses
Posted: Mar 8, 2006 7:18 PM
Reply Email
No one has been able to help me solve this problem even geeks on call
So please out there give me some good advice. This feels like a level 5
I have three computers at three different locations. The first one is a emac at my office running classic 9.2. The second location is a power book g4 running 10.4.5. at my home. The third is a power book g3 running OS 9.2.2at a third location.
What I am trying to do is to access my computer at my office from the other two locations. My office has two computers that are on a network and talk to each other. They are both EMAC"S. They are connected by a ethernet network which is connected to a DSL modem which keeps me on the Internet all the time.
At the other two locations I have direcway satellite which is broadband which also stays on all the time on the internet.
I need to be able to access a data base on my main computer at my office and run the program which is an Omnis 7 program. I have multi user capabilities for this program, so that all the computers can access the data files at the same time and reqad and write.
So this is my dileema.
Any help would be greatly appreciated
powerbook g3,emac Mac OS 9.2.x also 9.2 os, and 9.22 o.s.and 10.4
eww
Posts: 2,224
Registered: Jul 28, 2000
New! Re: I desperately need to solve this problem
Posted: May 17, 2006 6:08 PM in response to: drpresseyewell, at any or all of the locations you may need to open up the ports through your routers to allow ARD access.
Also, I'm wondering if you are experiencing problems between using old and new versions of remote desktop.
In any case, when you say you have multi-user capabilities, to me that implies that from location 2 and 3 you want to open the database file directly, not open it within an RDC session on a machine at location 1. That will be a different issue. Now you are talking about file shares over TCP/IP. -
Hello, I am using tesseract api in my app, which run perfectly on simulator but on test devise (real devise) it is showing an error i.e "apple mach -o linker error linker command failed with exit code 1", please any body help me to solve the problem
if you can't compile the webutil.pll in your forms developer you need to set the forms_builder_classpath in you windows registry. You have to add the frmwebutil.jar,jacob.jar to the registry key. The configuration files you mention are for running the forms.
-
my iphone 3gs is upgraded to ios 6.1.3 from ios 5.0.1 then it continues to shutting down then turning on i think that ios 6 is cannot carry by my iphone help me to solve this problem tnx
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Pay particular attention to Steps 3 and 4.
When prompted... Choose Restore as New ( not from backup.) -
I am blocked, as I have updated new apple virsion, which do not allowed sim card purchased in India, at present I am in India
and I want to use my phone using by purchase local sim card, please help me to solve this problem...Jayendrabhai PatelYOU will need to contact the carrier to whom the phone is locked. YOU will need to see IF that carrier offers unlocking and IF you qualify. This has nothing to do with Apple or this forum.
Best,
GDG -
Can you help me to solve this problem (user-exit for xd02)
Hi!
can you help me to solve this problem?
transaction XD02
To pass the length of the field to 7 max for KNA1-SORT (Search criterion 1 )
To pass the length of the field to 4 max for ADRC-SORT2 (Search criterion 2)
It is not possible to save the customer card as long as the search criterion is not univocal
I seek one to use-exit .
Thanks.Hi,
Check the exit SAPMF02D.
Regards,
Surinder -
Dear , please help me to solve my problem in activating my iPhone
Where I lost it since 3 months and when found it cannot activating my ID
Where give me (Your Apple ID has been disabled for security reasons. To enable your account, reset your password at applied.apple.com)
And try to reset my password but cannot please help me where am a poor man and cannot pay another money to solving this problem to any one
My iPhone data
Ime: ****
Model: A1332
FCC ID : BCG-E2380A
IC: 579C-E2380A
MY id at cloud ****
Password ( ****)
My country : Egypt
MY EMAIL : ****
Tell no: ****
<Personal Information Edited By Host>The following may help:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears - Apple Support
If you didn't receive your Apple ID verification or reset email - Apple Support -
Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring.So i poen simcase and now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks
As far as trying to power up your device, make sure it has a good charge and then hold the button on the top of the phone and the home button on the faceplate together until the apple appears on the screen.
-
Hi, when ever I'm using 3G, on my Iphone4 sim stops working and network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem. Thanks.
Photos/videos in the Camera Roll are not synced. Photos/videos in the Camera Roll are not touched with the iTunes sync process. Photos/videos in the Camera Roll can be imported by your computer which is not handled by iTunes. Most importing software includes an option to delete the photos/videos from the Camera Roll after the import process is complete. If is my understanding that some Windows import software supports importing photos from the Camera Roll, but not videos. Regardless, the import software should not delete the photos/videos from the Camera Roll unless you set the app to do so.
Photos/videos in the Camera Roll are included with your iPhone's backup. If you synced your iPhone with iTunes before the videos on the Camera Roll went missing and you haven't synced your iPhone with iTunes since they went missing, you can try restoring the iPhone with iTunes from the iPhone's backup. Don't sync the iPhone with iTunes again and decline the prompt to update the iPhone's backup after selecting Restore. -
Hello Experts Please help me to solve this problem.
Hello Experts,
I am getting a problem while installing the SOLUTION MANAGER 4.0.
in step 17/45 IMPORT ABAP :
the problem is :
ERROR 2008-04-29 03:10:28.110
CJS-30023 Process call '/usr/sap/SLM/SYS/exe/run/R3load -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.
when i saw R3load.exe.log file it has the following contain :
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SLM/SYS/exe/run/R3load: START OF LOG: 20080428095833
/usr/sap/SLM/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
/usr/sap/SLM/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled Jul 14 2007 02:19:03
/usr/sap/SLM/SYS/exe/run/R3load -testconnect
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
(DB) ERROR: DbSlErrorMsg rc = 99
/usr/sap/SLM/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SLM/SYS/exe/run/R3load: END OF LOG: 20080428095834
Please can any body help me to solve this problem.
waiting for fast response, as my installtion is pending due to this problem.
have a nice day.
Regards,
Shivendra.Hi,
The following should be verified:
(1) check what DB instances the listener currently is aware of. This can be done with the command 'lsnrctl services'.
(in case you listener does not have the default name LISTENER, then use 'lsnrctl services <listener name>' )
(2) Perhaps there is an issue with the dynamic instance registration, even though the error code is different, you should nevertheless check the points from note #563574.
(3) Verfiy the value of the parameter local_listener (see mentioned note). Since you have changed the listener, the parameter might still be wrong.
In case local_listener is correcly set you should give the command
ALTER SYSTEM REGISTER;
a try.
Best Regards,
Michael -
My iPhone 5s was bought with full price in the USA from Sprint, and I was told that it is a global phone. And I can use it in china.
But I can not use it in the USA, so could you mind help me to solve that problem.
I think someone of you must help me to solve this problem !
Details:
SN:F2*****FDR
<Edited by Host>See the response in your other thread:
https://discussions.apple.com/message/24641427#24641427 -
Dear Sir, i have problem in my Iphone 5 that during receiving any calls always appeare message that error in application occurred please call support quoting error code 2907. I need to solve my problem.
The problem this message always appeare when receiving the calls and requesting either accept or cancel.
Can you advice me if i have wrong application or i need to remove some applications.
Maybe you are looking for
-
Headset does not work after latest update...
It is very "strange" that since the latest system update on my Z3 compact my headset is not working at all. I use my all time favourite iphone 4 headset. It worked flawlessly before the update but now if I plug it in, the phone is not recognizing it
-
How to make a field default in mm01 while coping from other material
hi all, i want to make a field default in mm01 ....mara-mstae - say value 'A', when i am coping from other material. normally a T.variant is working in the scenario when im creating a material but not when i am coping from other material. Any field e
-
Itunes quit working after a failed Itunes update. Don't know why the update failed, but afterwords I got an error stating R6034 An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support t
-
How to disable an ipod touch that won't connect to itunes or the computer
I recently got an ipod touch that was reset before being given to me. It wouldn't connect to iTunes or the computer but would still charge in the USB port. I updated iTunes and tried doing a soft reset holding down home and sleep. Then I realized on
-
Free Sample items to be captured in separate G/L Account
Hi all, I gone through the thread before posting this because of some confustion still i had in my mind. My cleint requirement is Finished products which normally processed in the sales order as TAN, some times given to customer as a "FREE SAMPLE" fo