Help needed to track down Problem in tiger with Pioneer DVR-110D

ok as i stated in another topic i own a Beige G3 AIO that is running OS 9.2.2 and OS X 10.4.8 and i have done allot to this system to get it to run faster and to run properly.
part of this setup has a Pioneer DVR-110D it there and when i bought it i was running OS 9.2.2 only. at first i could not burn anything with it cause it wasn't supported and when i went to put the system to sleep it would freeze when i would wake it up it never did this before i installed the drive so i knew what was causing it.
i turned off HDD sleep and the problem was fixed. but i didn't like the ideal of having the hdd running all the time when idle. me and a friend was talking about optical drive issues and he said he found this driver replacement for the apple cd/dvd driver called intech speed tool's 6.0 for OS 9.2.2 and that i should give it a try cause it fixed a few problems for him.
i downloaded the demo of it and installed it and i turned on hdd sleep and put the system to sleep and woke it back up and the system was running great. so now the wake up freeze problem was cured. but still no burn support. so after a few weeks of posting on here about the problem some one came by and said he knew what the problem was and sent me a modded PioneerCDR authoring support extension. i installed it and rebooted and opened iTunes and iTunes showed Pioneer DVR-110D as the devise to burn to. so i tryed it and behold it burned a audio cd with no problems.
later i bought a western digital SE 120gb hdd and installed it and partitioned it 3 times a 8gb first partition for OS X a second partition 10gb for OS 9.2.2 and the 3rd partition was the rest of the drives size for shared data and storage. the hdd worked great with no issues so it was time to try OS X on this system cause i was waiting to get a large HDD to do so.
i figured that the Pioneer drive would not boot the OS X jaguar cd and is a known problem with non apple cd rom drives. so i took out the Pioneer and reinstalled the apple 24x stock cd rom drive. and the jag install cd booted without a hitch. Jag installed and was running so i updated to 10.2.8 and found out the internal screen kept going out and locking the system up. so i searched this forum for the onboard video blackout and came across the terminal work around to get the system to behave itself with having more than 192mb ram installed. i rebooted and all went fine afterward.
i reinstalled the Pioneer drive and went to testing it all was fine everything mounted on the desktop that i put in the drive. but i lacked the ability to burn with the drive cause still the drive wasn't supported be the system so i searched the forum and came across the program called patchburn. i downloaded it and ran it and patched the driver to support iApps burning with this drive. so i put in a blank cd and went to burn in iTunes it burned flawlessly so i tryed a dvd-r with the finder it to burned flawlessly.
o loved playing a game planeshift and then they stopped supporting 10.2.8 so i went to buy the tiger install cd's. i already knew the Beige G3 was not a supported version of Os X on this system and you had to use xpostfacto 4 to install tiger on this system. so i did what i had to do to install tiger on the system and selected use old NDRV and selected to install tiger. which installed some files to boot tiger and rebooted yet again the Pionner drive refused to boot the install cd's . i got mad and held down the command option power key's for about 10 seconds and let off. the tiger installer booted and got to where it started to copy the files to the hdd and stalled out and the drive spun down never to spin back up or show signs of life so i powered down the system and removed the pioneer drive and put the stock 24x cdrom in and installed tiger.
after tiger was installed i shut down the system and installed the pioneer drive. and powered back on and it was in verbose mode showing what was going on one part showed that the Pioneer drive was detected but had no kernel dependencies and continued to boot. i went to repair the permitions when the onboard video went blank and the system locked up. i rembered that 10.2.8 did the same thing so i tried the 10.2.8 screen blackout fix in 10.4 and rebooted. the onboard video didnt come on but since i had a ATI Radeon 7000 i could work around in tiger to update to 10.4.7 at the time. i first repaired permitions and then ran software update and updated everything and rebooted. the onboard video came back on allong with the ATI Radeon 7000 which being used as boot video device and shown the gray apple logo with the spinning pin wheel at the bottom.
so far tiger was running great so i put a disk in the drive and nothing it didn't mount anything so i ejected it with the button on front of the drive and tryed a dvd movie and got the same nothing as with the cd. so i rebooted with the dvd in the drive al behold tiger mounted the dvd but as soon as i would try to do anything with it the drive would stop and i would have to reboot the system to gain the drive back so i can repair permissions. and never tryed to use the drive again
10.4.8 update came out i updated to it using software update and rebooted. the update went flawless so i thought to myself what if the pioneer drive worked now. so i put a cd in the drive and it mounted the disk. then i ejected it with amazement and put a dvd in and it to mounted. so i tryed to play the dvd and it played the dvd to the end of the movie. i took out the dvd and rebooted. i tryed to put the dvd back in but it didnt mount. which ****** me off as to why it was just working and now its not.
i rebooted and the dvd mounted as soon as the desktop showed up so i tried to play it but this time it only played for about 10-13 minutes before the drive stopped spinning which made dvd player stop responding which made me have to force quit the dvd player and try to restart which gave me a kernel panic. so i forced restarted (got a forum to send to apple to report the KP so i did) and the dvd mounted once again as soon as the desktop showed so i ejected the dvd and put a audio cd in and it mounted and i played the hole cd. so i ejected that and put a blank cd in and treed to burn and it got to 30% and then the drive spun down and made the disk utility stop responding. so i forced quit disk utility and rebooted. once it rebooted nothing popped up so i pressed the eject button on the drive and the cd r came out.
the OS X 10.4.8 update made the drive more stable but still wont burn anything. some times it will still not mount anything, some time it will not play anything, and still fails to copy files over to the hdd. so now im left to believe its a driver issue some where since this drive worked so flawlessly in jaguar and OS 9 but fails to work properly in tiger.
i looked in the extensions in ASP in 10.4.8 and there is a few extensions showing errors. i made a list of them to show
PatchedAppleNVRAM:
Version: 3.0
Last Modified: 8/9/05 6:07 PM
Location: /System/Library/Extensions/PatchedAppleNVRAM.kext
kext Version: 3.0
Load Address: 0x4db000
Valid: Yes
Authentic: Yes
Dependencies: Incomplete
Dependency Errors:
com.macsales.iokit.OpenOldWorldNVRAM: No valid version of this dependency can be found
Integrity: Unknown
OpenPMUNVRAMController:
Version: 2.0
Last Modified: 8/9/05 6:08 PM
Location: /System/Library/Extensions/OpenPMUNVRAMController.kext
kext Version: 2.0
Load Address: 0x63a000
Valid: Yes
Authentic: Yes
Dependencies: Incomplete
Dependency Errors:
com.macsales.iokit.OpenOldWorldNVRAM: No valid version of this dependency can be found
Integrity: Unknown
GossamerDeviceTreeUpdater:
Version: 3.0
Last Modified: 8/9/05 6:07 PM
Location: /System/Library/Extensions/GossamerDeviceTreeUpdater.kext
kext Version: 3.0
Load Address: 0x63d000
Valid: Yes
Authentic: Yes
Dependencies: Incomplete
Dependency Errors:
com.macsales.iokit.OpenPMUNVRAMController: No valid version of this dependency can be found
Integrity: Unknown
that is the list of extensions that are reporting some sort of errors. at first i was figuring it was a problem with the driver for the Pioneer drive but my friend brought over his digital audio G4 which was also running 10.4.8. and we decided to try the drive in his Mac to see if there was any problems. it mounted everything we threw in it. it played dvd's great and played audio cd's great, it copied files over to the hdd without fail. it even burned a flawless cd. ok now the ideal of the driver for the drive was thrown out the window. so it has to be something else causing the problem. either a driver for a part on the motherboard or what i have no clue.
im just wondering what driver it would be causing a problem not allowing the Pioneer drive to work properly. cause its not the drive being bad cause it worked flawlessly in OS 9.2.2 and jaguar and in tiger in my friends digital audio G4
im just wondering if anyone might know what could be done to fix this problem cause i know it can be fixed but i don't know where to begin or how. so i ask you how could i begin to fix this
thank you all for baring with me and reading all this. i know i wrote allot but i had to explain what was going on before i could ask for help so you could better understand what was going on. i have already updated the firmware to the latest with no change the firmware use to be the old 1.11

yea i have along time ago and also made a update to xlr8's drive database. cause i fixed the problems with the drive in OS 9.2.2 (AKA no burn support with the built in burning app or iTunes, now have full support for burning with the finder burn and iTunes thanks to a edited PioneerCDR authoring support extension that someone edited for me. found out that the Apple CD/DVD driver extension was at fault for the locking up on wake up with hdd sleep enabled that started when i installed the Pioneer drive. fixed with intech CD/DVD speedtools 6.0).
When i did the first report on the drive database on xlr8yourmac i reported what problems i was having in OS 9.2.2 and i think i reported that i had no problems in jaguar, and was trying to obtain a driver or something to try to get it to work. but to no avail at first. after i fixed the problems i did a update report
in jaguar the drive had no problems but no burn support. installed patchburn and the drive worked 100% in jag no problems what so ever. im thinking it has somthing to do with one or all of the extensions with errors but i can be wrong.
i just wonder where ryan has been on the forums in OWC's site. cause i would like to submit my crash log panic log and the extensions with errors so he could help track down the problems to see if it cant be fixed. but ive tried emailing him but no replay's. and his last reply on the OWC forums was back in desember 2005 a few day's over a year
i know it isnt the drive cause it worked flawlessly in tiger 10.4.8 on my friends Digital Audio but i know why it worked fine cause it has the proper files for the DA to work cause its a supported system. i would like to try to help to get xpostfacto to work better on the Beige G3 system
in tiger if it is something to do with xpostfacto

Similar Messages

Tiger and pc version of the Pioneer DVR-110D problems

ok here we go
I have tried the Beige G3 part of this forum with no luck cause i use a Beige G3 AIO
ok i have a Beige G3 AIO with a pc version of the pioneer DVR-110D running tiger 10.4.7 the drive will hardly work in tiger but will work flawlessly in 10.2 - 10.2.8, OS 9.x, windows 98, windows xp
the only way this drive will work in tiger is if i reboot with a disk in the drive and then it will work. but it will some times decide to stop working after 20 minutes or until i take out the disk.
some times it will stay working until i try to play dvd movies or try to burn with it then it will stop working and have to reboot with a disk in the drive in order to get it working again. if i don't reboot with a disk in the drive the drive will not work at all until i reboot with a disk in the drive.
im not sure if tiger is using a wrong driver for the drive or what. i know the drive is not bad cause it works so good under OS 9 and OS X 10.2 - 10.2.8. i can burn i app's under OS 9.2.2 with a modded pioneercdr authoring extension, and i can burn under OS X 10.2 - 10.2.8 with patchburn. but tiger refuses to work with the drive.
other than that tiger is running flawlessly on my Beige G3. the way it seems that its using a improper driver for the drive cause there is a apple branded version of the Pioneer DVR-110D with a modded firmware and a standard PC Pioneer DVR-110D with a pc firmware. if tiger is trying to use the drive as the apple version of the drive it can cause this cause the firmware is totally different from the standard pc version of the drive.
is there any one that can shed some light on this. maybe a driver edit or something maybe firmware to the apple version so i can try to flash this pc version to the apple firmware. or something. this drive should work as is if it works so great under OS 9.x, OS X 10.2 - 10.2.8, windows 98, and windows xp.
another problem i have is not being able to boot any OS X cd by normal means. i can get it to boot the 10.2 install cd by having the cd in the drive and hold the command option and power key's for about 5 seconds and some how the drive is tricked to boot and it does but it always fails to install cause the drive stop's working during the copy process.
the drive will boot the tiget install cd (with help from xpostfacto) without doing the trick to get OS X 10.2 install cd to boot but will still fail during the copy process. i know the fix for this is to get ahold of the apple version firmware for the DVR-110D drive. that also might fix the problem that it has under tiger. but it weird since the drive works great under OS X 10.2 - 10.2.8
sorry for making this a monster post but i would love to et this drive to work like it should under tiger like it does under the other OS's
BTW tiger is running great on the old beast besides the pioneer drive problem. not once has tiger failed to boot, not once has tiger crashed, ive timed this system on its boot time into tiger (34 seconds from start chime to full working tiger)its kinda sad to have tiger working so great but has this problem with the pioneer drive

i didnt say i used patchburn in tiger, only in jaguar did i use patchburn to gain burn support. altho i can try to use patchburn in tiger to see if it would help with the issue. AKA it seems like a driver issue to me
on how it will mount disk's when i reboot with a disk in the drive but will only halfway work. but will not mount anything if i boot without a disk in the drive when i put a disk in . but ASP in the ATA tap will show the drive . i can select disk burning in ASP only when the drive is working in its halfway state to show info. if i try when its in its non working state is will lock ASP up and some times throw tiger into a kernel panic when i try to reboot . after all that if i leave the drive alone tiger is ok

Troubleshoting help needed: My iMac keeps crashing and restarting with a report detail: "spinlock application timed out" What can I do to fix this?timed out"

Troubleshooting help needed: My iMac keeps crashing and restarting with a notice: "Spinlock application timed out" What can I do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Help needed in Drop down list value input

Hi experts,
My problem is, I added a field on a screen as a drop down list box and passed all the values to it. Everything is fine. But I need to display the field like if there are no input values to be used by the user, the user should be able to enter some value manually which is not in the list. I'm unable to get this facility. Plzz Help me out.
It's really urgent. Points will be rewarded to the solution.

hi ,
Here is a sample of code for creating a dropdown list in screen painter , and this has got the solution of your question :
module create_drop_down_box_material output.
select matnr from mara
           into table l_tab_mara_matnr
           where matkl = 'ZPMBMAT'.
if not l_tab_mara_matnr[] is initial.
    select maktx from makt
                 into l_tab_collect_maktx_frm_db-material_descr
                 for all entries in l_tab_mara_matnr
                 where matnr = l_tab_mara_matnr-material_no.
      append l_tab_collect_maktx_frm_db.
    endselect.
endif.
loop at l_tab_collect_maktx_frm_db into l_wa_collect_maktx_frm_db.
    l_wa_mat_descr-key = l_wa_collect_maktx_frm_db-material_descr.
    append l_wa_mat_descr to l_tab_mat_descr.
endloop.
name = 'ZCOT_PPT_DTLS-MATERIAL_DESCR'.
call function 'VRM_SET_VALUES'
    exporting
      id              = name
      values          = l_tab_mat_descr
    exceptions
      id_illegal_name = 1
      others          = 2.
free: l_tab_mat_descr,l_tab_collect_maktx_frm_db.
endmodule.                 " create_drop_down_box_material OUTPUT
Regards,
Ranjita

Help needed in backgroung job problem ?

Hi All,
I scheduled VF31 txn in a background to email the invoices. Now the problem is, when suppose,
if i have 10 invoices and the third invoice doesnt have an mail address....job gets failed..
what i need is even if the third invoice fails i want the job to continued with the fourth invoice.
can anyone help me in this regard.
Thanks.

> I scheduled VF31 txn in a background to email the invoices. Now the problem is, when suppose,
> if i have 10 invoices and the third invoice doesnt have an mail address....job gets failed..
> what i need is even if the third invoice fails i want the job to continued with the fourth invoice.
> can anyone help me in this regard.
This means you are may be standard SAP is issuing the error messag when there is no email id on the invoice. Please have a look at the print program for the output type and make sure dont issue any error message if there is no email id.

Really basic help needed bouncing tracks to mp3

Hi
We have been working on some new music in MIDI format and really would like to have them available to play on our ipod. I have read the manual on bouncing to mp3 format. However I have 2 problems.
1) Some tracks don't even allow my to bounce to mp3. When I try to select file>Bounce, I cannot select it as it is not available and is the light grey colour of unavailable items.
2) The tracks that I have been able to bounce have no sound when I play them back in itunes or quicktime player.
What do I do to fix these two problems. Thank you for your help.

Hi and welcome to Logic Express,
First of all: Bouncing is usually done by bouncing from the Master Output Channel. You should see a small Bounce Button (Bnce) below the Fader (look to the left in the Inspector window - there are 2 Channel Strips. The Left is for the selected Track and the right one usually is the master Output (Out 1-2). Or you can select Bounce from the File Menu. Only Output Tracks can be bounced! You can't bounce individual tracks, but have to route them to an output. Usually, this routing is on by default, so if you didn't change it, it shouldn't worry you.
See if none of your tracks are muted and if you can actually play back the entire project and hear the desired result in Logic. If so, hit the bounce button below the master output (1-2) fader.
The second step is to select the right method of bouncing. There should be a popup menu now asking you about filename and so. Enter the desired filename and maybe another folder. If not, Logic names it Output 1-2.mp3, which isn't that bright. To the lower left, u should see some available file formats. Check mp3 (this is important!) first. Also select offline bounce, if not checked. Check if "normalise" is activated. If not, activate it.
Now, the options change to allow some mp3 specific tweaks. Use the ones you like. I use about 160kbits for stereo, normal stereo mode, and tweak all the ID3 Tags as desired. Also check "add to itunes library".
Now, before you bounce, check if the start and stop marks of the bounce are actually the same that you want them to be. Sometimes they snap to the last marked region, which isn't neccesarily the correct song length. I messed up some bounces before i got this right.
If everything looks good, hit bounce. Logic should bounce, normalize and convert to mp3 now. Wait some seconds for iTunes to get the song imported. There you are. If not, ask again
Fox

Help needed in solving a problem, thanks. Code Attached..

Hello All
I am facing a problem working with Berkely DB 4.5.20. I am trying to search in the database whether the key is already present or not. It is working fine with Microsoft Visual Studio but when i use the same code with Code::Blocks editor and MinGW compiler. It is not workig fine.
The code for searching the key is*****
bool CDbProject::IsKeyIndexAvailable(ProjectKey ProKey, UINT DataIndex)
int ret=0;
Dbc *cursorp;
bool flag=false;
cursor(NULL, &cursorp, 0);
//set the key
Dbt key(&ProKey, sizeof(ProKey));
Dbt data;
//search the database for the key.
ret = cursorp->get(&key, &data, DB_SET);
//ret = cursorp->get(&key, &data, DB_NEXT); //Rohit
if (!ret)
{ //if found check if the index is same
do
ProjectDataDetail *myProjDetails;
myProjDetails = (ProjectDataDetail*)data.get_data();
if (myProjDetails->uIndex==DataIndex)
flag = true;
break;
} while (cursorp->get(&key, &data, DB_NEXT_DUP) == 0); //Loop all the duplicate
if (cursorp != NULL)
cursorp->close();
return flag;
And the function to save the data in the database is *******
int CDbHandler::Put(void* pKey, size_t nKeyLen, void* pData, size_t nDataLen)
     int ret = 0;
     Dbt key(pKey, nKeyLen);
     Dbt data(pData, nDataLen);
ret = put(NULL, &key, &data, DB_NODUPDATA);
if (ret==-30996)
ret = ERR_PROJECT_KEY_DATA_ALREADY_EXISTS;
return ret;
Please help...
Thanks in advance,,,
Message was edited by:
user610238

Thanks for the reply Sandra
I try to tell what is happening in the search key function, If still not possible, then i will try to create a stand alone application...
bool CDbProject::IsKeyIndexAvailable(ProjectKey ProKey, UINT DataIndex)
int ret=0;
Dbc *cursorp;
bool flag=false;
cursor(NULL, &cursorp, 0);
//set the key
Dbt key(&ProKey, sizeof(ProKey));
Dbt data;
//search the database for the key.
// SANDRA......If i use DB_SET,as you can see below. It is not able to find the key at all. BUt if i use DB_NEXT, then it is able to find the first key only everytime with the data also (Even if i am looking for some other key, it will find the first key saved always..)
ret = cursorp->get(&key, &data, DB_SET);
//ret = cursorp->get(&key, &data, DB_NEXT); //Rohit
if (!ret)
{ //if found check if the index is same
do
ProjectDataDetail *myProjDetails;
myProjDetails = (ProjectDataDetail*)data.get_data();
if (myProjDetails->uIndex==DataIndex)
flag = true;
break;
} while (cursorp->get(&key, &data, DB_NEXT_DUP) == 0); //Loop all the duplicate
if (cursorp != NULL)
cursorp->close();
return flag;
}

Help needed for white screen problem with no shortcuts working on startup.

Im using a 20" mac OS X with leopard, When IMac turns on there is just a white screen with nothing happening so Iv tried using all of the shortcut command keys such as "command+R" with no success.
My main question is which cd will I need to get a hold of so i can completetly wipe the imac and start again fresh?
Any help will be appreciated.
Unsure of operating system being used as cant get onto Mac.

The install disc that shipped with the machine. Running Leopard and there's no recovery HD (CMD+R) feature. That only came with Lion.

Help needed for WiFi connection problem

Hello
My wife's iPad2 with current iOS 8.3 sometimes will not connect to Wi-Fi - any ideas on how to correct the problem?
It's inconsistent!
Thanks for any thoughts about this.
David

If you want to do this in sql you've to use dynamic sql to select only columns having the data.
And you can always use end user tools like SSRS to display only columns having values by using expression for visibility property.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
Visakh16-
Can you please help me on how can I achieve this using SSRS.
Thanks.
Hi Mutali,
Personally, I don't recommend using SSRS.
If you want to design a SSRS report,you should retireve all columns and specify column visibility for each column with following expression.
=IIF(Fields!SomeFieldValue.Value > 0, True, False) (Note:Supposing the data type of the field is INT).
You can refer to the solution as
Jingyang Li post above.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Help needed urgently on a problem..plzzz

hi..this is a linear congruential generator. I have to implement it and i need the execution time for the program.
for your understanding i'm providing an example below.
Xn=(( a* xn-1 )+b) mod m
If X0=7 ; a = 7 ; b =7 ; m=10
Then
X0 = 7
X1 =((7 * 7) + 7))mod 10 = 6
X2 = ((6*7)+7))mod 10 = 9
X3 = ((9*7)+7) mod 10 = 0
X4 = ((0*7)+7) mod 10 = 7
Now since the cycle is being repeated i.e 7 appears again�so the period is 4 coz there are 4 diff nos. i.e 7,6,9,0�..
help required urgently....your help will be appreciated...thankyou..

Hi,
I wrote the code so that it catches any cycle (not only the "big" one).
Otherwise it will enter infinite loop...
The time complexity is O(N*logN): it can do at most N iterations (here N is your 'm'), and in each iteration there can be O(log N) comparisons (since I maintain TreeSet).
Interesting issue: is it possible to supply such (x0, a, b, m) tuple such that all possible values from 0 to m-1 will be output? I think no :)
Here is the program:
package recurr;
import java.util.TreeSet;
import java.util.Comparator;
public class Recurrences {
     private static long x0, a, b, m;
     private static TreeSet theSet;
     public static void main(String[] args)
          long l0, l1, l2, l3;
          try {
               x0 = Long.parseLong(args[0]);
               a = Long.parseLong(args[1]);
               b = Long.parseLong(args[2]);
               m = Long.parseLong(args[3]);
          } catch(NumberFormatException nfe) {
               nfe.printStackTrace();
          System.out.println("X[0]: " + x0 + "\n");
          long curr = x0;
          boolean cut = false;
          int i;
          // initialize the set
          theSet = new TreeSet(new LongComparator());
          // we can get at most m distinct values (from 0 to m-1) through recurrences
          for(i=1; i <= m; ++i) {
               // iterate until we find duplicate
               theSet.add(new Long(curr));
               curr = recurrence(curr);
               if(theSet.contains(new Long(curr))) {
                    cut = true;
                    break;
               System.out.println("X[" + i + "]: " + curr + "\n");
          if(cut) {
               System.out.println("Cycle found: the next will come " + curr + "\n");
          } else {
               System.out.println("No cycle found!");
          System.out.println("----------------------------------");
          System.out.println("Totally " + (i-1) + " iterations");
     private static long recurrence(long previous)
          return (a*previous + b)%m;
     static class LongComparator implements Comparator
          public int compare(Object o1, Object o2)
               if(((Long)o1).longValue() < ((Long)o2).longValue()) {
                    return -1;
               } else if(((Long)o1).longValue() > ((Long)o2).longValue()) {
                    return 1;
               } else return 0;
}

Help needed - bose sound dock problems after update

I recently updated my iphone 3GS to the new iOS5 update and ever since then, it will not play music through my bose sound dock and it won't even charge. Has anyone else experienced this problem and if so, is there a solution yet? Seems like an expensive waste of kit to have my bose sitting there lifeless!
Thanks for your help!

Im experiencing the same problem with my ipod touch not playing through my bose soundock! How do I fix it? Please help

Help needed!! Slideshow problems.

OK I have mad a simple slide show in flash and the
actionscipt is equally as simple as I am a complete noob and dont
know what Im doing.
The problem is that my slide show plays once, then loops back
to the beginning (all good so far) then it freezes at the end of
slide2. Whats going on? Why does it work the first time and then
stop on the second run? Can anyone help please?
Here is the code I am using:
To move to the next slide I have:
stop();
function goNext(){
currentSlide.gotoNextSlide();
clearInterval(timer);
var timer = setInterval(goNext, 500);
To move to the 1st lside I have:
stop();
function goNext(){
_root.presentation.gotoSlide(_root.presentation.slide1);
clearInterval(timer);
var timer = setInterval(goNext, 500);
Thanks

Try this.
Put the clearinterval at the starting of the function.
stop();
function goNext(){
clearInterval(timer);
currentSlide.gotoNextSlide();
var timer = setInterval(goNext, 500);
//Second
stop();
function goNext(){
clearInterval(timer);
_root.presentation.gotoSlide(_root.presentation.slide1);
var timer = setInterval(goNext, 500);

Hi, help needed in shutting down Apple Discusions

Hullo there, I have contributed to Apple Discussions for many years and I like the new format a lot!
However, I find I am getting dozens of emails each day, and nothing seems to shut them off!!
I have tried Preferences and Notifications ........all to no avail!!
I do find the constant emails interesting but, overwhelming!!!
How can I shut these off?
A frustrated Ron
Thanks

I think you'll need to go to the specific discussion and in the upper right you can click to not receive email notifications.
To go to a lot of your previous postings you can click on your username and click "your stuff", then click on each discussion down the list and disable the email notification for it.

Help needed! Airport extreme problem

I've had a lighting strike in my back yard that blew out my underground cable, the in-line splitter where the cable enters the house, and now I'm suspecting that the internet connection port on my base station extreme is also damaged.
The cable and splitter have been fixed, I have cable (TV) but no internet
I have a G4 that is not Airport capable, a G5 dual that is running airport and I can bypass the base station and plug the ethernet cable into my G4 processor and have internet access.
I'm not having any luck when I plug the ethernet cable into the G5, it still says I'm not connected to the internet. (I'm not real familiar with setting up the internet connection using the ethernet cable, and that may be the source of my difficulty when attempting to plug directly into the G5.)
Both machines are running Tiger.
Is it possible that the input for the internet cable on the bas station could be damaged by a power surge?
How do I test the base station to verify just what is wrong?
Many thanks for any help,
Blumer

I'm not real familiar with setting up the internet connection using the ethernet cable, and that may be the source of my difficulty when attempting to plug directly into the G5.
Here's the steps to setup network access for the Built-in Ethernet on your G5
System Preferences > Network > Show > Network Port Configurations
o Verify that a Built-in Ethernet option exists. If it does not, click "New" to create one. (Note: If you are unable to create a Built-in Ethernet configuration, the Ethernet card in your computer either doesn't exist or it is not recognized.)
o Verify that Built-in Ethernet is "On" (checked)
o Verify that Built-in Ethernet is at the top of the list. If it isn't, you can drag it to the top.
TCP/IP tab
o Configure IPv4: Using DHCP
o Configure IPv6: Automatically or Off
Proxies tab
o Configure Proxies: Manually
o Select a proxy server to configure: <All proxies should be unchecked unless you specifically require a proxy for Internet access.>
o Exclude simple hostnames (unchecked)
o Bypass proxy settings for these Hosts & Domains: <leave blank>
o Use Passive FTP Mode (PASV) (checked)
Ethernet tab
o Configure: Automatically
Is it possible that the input for the internet cable on the bas station could be damaged by a power surge?
Yes, based on your description of the aftermath of the lightning strike, it is very possible that the WAN port has been damaged.
How do I test the base station to verify just what is wrong?
If you confirmed that both of your computers can get Internet access by connecting them directly (via Ethernet) to the cable modem, then try the following.
With the AEBS connected to the cable modem via Ethernet, connect either of your computers to the AEBS's LAN port. Can you access the Internet? If not, then there is a good chance that the AEBS was damaged.

* Help Needed! Nokia N73 Problem *

Iv owned my Nokia N73 for about a year now and have never had any problems with it untill this day I was listening to a bit of music on the way back from a family holiday through my Nokia Headset which came with the phone and when i got home i unplugged the headset from the phone and it still remained in like the headset mode =S Its as if the phone thinks i still have the headset plugged into the phone even though its unplugged... Because the phone thinks the headset is still plugged into it there is no sound coming through the loudspeakers on the phone =S I just want to know if i can sort this problem out because i can't hear when i have a text, theres no ringtone sound when someone phones me and my m8's say they can not hear me speak when i answer... The headset symbol on my phone stays on even though it is unpluged which makes the phone thinks the headset is still plugged in =S
If anyone can help me plz comment =] If anyone knows something that i can do to fix this can you also plz add onto the comment. Cheers
.... L3W1SB .... (Nokia N73 - V 3.0638.0.0.1 Firmware)

i had this happen to me. i connected headset back on and managed to turn it off. but it kept happening. moisture also does this as my toddler gets hold of it and puts that end in her mouth as she feels the charge from it. i got a cotton bud and really cleanded it especially the deeper holed parts iykwim. it did the trick and had no problems since and n73 is well over a year old and still going strong and never had to reset or upgrade software.

Help needed to track down Problem in tiger with Pioneer DVR-110D

Similar Messages

Maybe you are looking for