Help needed upgrading from 4.1 to 6.2 for transfer to new Pre

I have a Sony Clie PEG-SJ22 that I sync on two computers using Palm Desktop 4.1.0 on each. The version on the computer in front of me lives in D:\Program Files\Sony Handheld. I just bought a Palm Pre and learned that in order to sync my data to it, I would have to first upgrade to Palm Desktop 6.2. I downloaded the 6.2 installation file and ran it. It recognized that Palm Desktop was already installed and prompted me to click "Yes" to upgrade it which I did. However the installation froze with the progress bar about 3/4 of the way through. I End-Tasked the installation, but now I can't run either the new version or the old one. (In fact the new version seems to have disappeared from \Program Files.) When I try to run the old version I get error messages about missing dll files. Before I try re-installing (or anything else) what should I do to make this go properly? Is there a problem because my old version of Palm Desktop was a Sony-Clie-branded version? Or is it something else?
Thanks
Samizdat
Post relates to: Pre p100eww (Sprint)

wjwncpro wrote:
Thanks WyreNut for your quick reply,
I'm able to restore my system prior to trying to installing the update so that I don't lose anything with my current Desktop 4.2. I might be in a catch-22 as that, if I do a clean uninstall of v4.1 and install the v6.2, will I be able to hotsync my Sony Clie TH55 since it's not a Palm product but uses the Palm Desktop to sync???
Any other ideas will be appreciated...
Thanks
I did a search of the Forum for "6.2 and Clie" and found several threads. None were very promising.
An example:
http://forums.palm.com/palm/board/message?board.id=windows_hotsync&message.id=30065&query.id=52739#M...
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

Help needed upgrading from Windows 8 to XP for Conexant Sound Driver

I upgraded from Windows 8 to XP and got everything else working except for the sound. I have scoured the internet and tried many versions of drivers from windows 7 ones to XP ones with no success. I tried older driver´s version as well. After a reboot there is no sound device loaded in the control panel for sound. I have a C845D-SP4327SL model laptop. Does anyone have any process to make this work that is proven? Thanks
Vladimir Pineda.

vpinedaq wrote:
I upgraded from Windows 8 to XP and got everything else working except for the sound. I have scoured the internet and tried many versions of drivers from windows 7 ones to XP ones with no success. I tried older driver´s version as well. After a reboot there is no sound device loaded in the control panel for sound. I have a C845D-SP4327SL model laptop. Does anyone have any process to make this work that is proven? Thanks
Vladimir Pineda.
hi. if you want to that your sound device was in control panel after a reboot , here is only one solution for that, all you have to do is upgrade first hdaudio bus controler. Driver must be copied first from computer with Vista os. if your xp is 32bit you have to copy this driver from any Vista x32 if your xp is 64 bit then Vista must be x64 as well. driver for forced upgrade through device menager you will find in any vista os Windows--> System32-->DriverStore-->FileRepository-->hdaudbus.inf9689af2f
once copied that file from any computer equiped with Windows Vista , copy it on your desktop, next step go to the device menager and find in system device tab 2 entries UUA High definition audio and update both by forced update. You have to point exactly where is located your driver copied from vista. after this update your sound device will be in the control panel and device manager always and permanent.
I had the same problem with my xp instaled on satelite p500 and only this solution solved my problem with disappearing sound device after reboot.
ps. if this solution help you please tell us about it.
Regards

Help needed upgrading from Vista to XP for Conexant Sound Driver

I upgraded from Vista to XP and got everything else working except for the sound. I have scoured the interenet and tried many versions of drivers from Vista ones to XP ones with no success. Even though the drivers seem to update correctly when installed, after a reboot there is no sound device loaded in the control panel for sound. I have a P105-6197 model laptop. Does anyone have any process to make this work that is proven? Thanks
Casey Jackson
Solved!
Go to Solution.

Satellite P105-S6197
Try these two sound drivers, Casey. The first one is newer (European date).
   Conexant Sound Driver for Windows XP, 3.44.0.0, 06/12/07
   sound-20071106151533.zip
   Conexant Sound Driver for Windows XP, 3.21.0.52, 15/10/07
   sound-20071015135316.zip
-Jerry

Hello. I just upgraded to Lion OS X 10.7.3. I was previously running 10.5.7 which included the ENTOURAGE application. how do I retrieve needed information from this application that no longer runs on this new system?

Hello. I just upgraded to Lion OS X 10.7.3. I was previously running 10.5.7 which included the ENTOURAGE application. how do I retrieve needed information from this application that no longer runs on this new system?

The file you'll be looking for that has most of what you're looking for - messages, address book, etc. is the Entourage Database. The verison of Microsoft Office I run (on Lion) is Office 2008. By default the Entourage Database for this verison is at user/Documents/Microsoft User Data/Office 2008 Identities/Main Identity/Database. That folder (Main Identitty) also has your rules, signatures, and such. You'll have to recover this file from whatever backup you have. If you have a different version of Entourage, the file location will be a little diffferent.
Good luck
srb

Need help with upgrade from Adobe Creative Suite to PS CS4

My old laptop with Photoshop on it crashed and I ended up purchasing a new laptop.
I'm trying to reload my PS CS4. I am using an upgrade from an educational Adobe Creative Suite Premium to the CS4 and when I loaded it on my old laptop I had to get installation help through customer service, but now customer service will not help me since it is CS4.
When installing the upgrade, it tell me to select the product I already own. I own the educational full creative suite, but am only upgrading the Photoshop. I chose Photoshop CS and tried entering the serial number for the suite. It tells me that the serial number doesn't match the product chosen. Of course the only products I'm allowed to choose from is Photoshop CS, CS2, or CS3 and not Creative Suite Premium.
The other serial numbers on this CS is Golive CO and Pagemaker Plug-in.
I was told there are Adobe customer service reps here on the forum, please tell me what it was I need to do to get my Photoshop installed.
Thanks

i wasn't aware that you could get a ps4 at an upgrade price using an older creative suite produect. i searched online and found this thread (http://forums.adobe.com/thread/476009) which makes it appear that was not a valid upgrade path.
but, if you're confident that was a valid upgrade path, i'm pretty sure something will need to be done on adobe's end and no amount of manipulation, on your end only, will work.
your best bet would be to get help in this forum from an adobe staff member like jeff wright who is very knowledgeable and goes out of his way to help adobe customers. to that end, if i were you, i would start a new thread mentioning his name in your title and in your initial post explaining:
you have the educational Adobe Creative Suite Premium and purchased a photoshop cs4 upgrade years ago that required adobe support help to install years ago.
that worked well until a recent computer problem forced you buy a new laptop and you are now trying to reinstall that ps cs4 and again need support help but have been refused help because cs4 is not current.

I need help please, upgrading from OS 10.6.8...

Please help me - I'm such a technophobe!! I need help upgrading from OS 10.6.8... I get part way through the process and get a box saying "The link needs to be opened with an application" and I don't know what to do next...

The only way to upgrade from 10.6.8 (which is high as Snow Leopard goes) is to obtain Lion or Mountain Lion from the Online Apple Store or Yosemite from the Mac App Store.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price (though it's reported to have been removed from sale in some countries so may well cease to be available generally) but there seems little point as the system requirements are the same for Yosemite (10.10.x) - which is free - unless you need to run specific software which will run on Mountain Lion only. Mavericks (10.9.x) is no longer available.
The requirements for Mountain Lion and Yosemite are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Yosemite is available from the Mac App Store (in Applications). Mountain Lion can be obtained the Online Apple Store.
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

Need Some Immdiate Help in Upgradation from 10.2.0.3 to 11.2.0.3 RAC 2 Nod

Hi Experts,
I want to upgrade from 10.2.0.3 to 11.2.0.3.
I have a Linux platform in place. It is a 2 NODE RAC WITH ASM
1. All my IP Addresses( Public/Private/VIP) are placed in /etc/host file.
Q1: When we upgrade to 11g It will ask for SCAN IP, what should I do for that, I don't have DNS working in my organization, where Can I get SCAN IP and its port#?
2. There are few components Invalid, Which I feel may be hindrance for my up gradation, Could you please tell me if I can upgrade the database even if Let these components Invalid?
COMP_ID COMP_NAME VERSION STATUS
AMD OLAP Catalog 10.2.0.3.0 INVALID
APS OLAP Analytic Workspace 10.2.0.3.0 INVALID
XOQ Oracle OLAP API 10.2.0.3.0 INVALID
When I checked the Invalid objects I found lot of invalid objects, tried to compile them, few got compiled rest with compilation errors, However One I found very much related to this was package body.
PACKAGE BODY OLAPSYS.DBMS_AW_UTILITIE INVALID
Tried to compile it..threw errors.
I did some R&D after checking some Oracle notes..I could find ORA-36961: Oracle OLAP is not available...poping up.
SQL> BEGIN cwm2_olap_level_attribute.Create_Level_Attribute('olapsys' ,'cwm2iner_d1' ,'cwm2iner_da1' ,'cwm2iner_l1' ,'cwm2iner_la1' ,'display_name' ,'short_description' ,'description'); END;
ERROR at line 1:
ORA-12663: Services required by client not available on the server
ORA-36961: Oracle OLAP is not available.
ORA-06512: at "OLAPSYS.CWM2_OLAP_MANAGER", line 153
ORA-06512: at "OLAPSYS.CWM2_OLAP_MANAGER", line 181
ORA-06512: at "OLAPSYS.CWM2_OLAP_MANAGER", line 228
ORA-06512: at "OLAPSYS.CWM2_OLAP_MANAGER", line 561
ORA-06512: at "OLAPSYS.CWM2_OLAP_UTILITY", line 1540
ORA-01403: no data found
ORA-06512: at "OLAPSYS.CWM2_OLAP_LEVEL_ATTRIBUTE", line 45
ORA-06512: at "OLAPSYS.CWM2_OLAP_LEVEL_ATTRIBUTE", line 188
ORA-06512: at "OLAPSYS.CWM2_OLAP_LEVEL_ATTRIBUTE", line 294
ORA-06512: at line 1
=========
Thanks

Hi,
You need to use a different IP address for the SCAN VIP. In your example, it cannot be the same as dlpqcora1.
Also, if you are not using a DNS to resolve it, then be aware that only one IP address can be configured (from note +[ID 887522.1] 11gR2 Grid Infrastructure Single Client Access Name (SCAN) Explained+ ):
>
Instead of DNS or GNS, Can we use '/etc/hosts' to resolve SCAN?
Oracle strongly recommends that you do not configure SCAN VIP addresses in the hosts file. But if you use the hosts file to resolve SCAN name, you can have only one SCAN IP address.
If hosts file is used to resolve SCAN hostname, you will receive Cluster Verification Utility failure at end of installation (See NOTE 887471.1 for more details)
>
Regards.

Help after Upgrading from 08 to 11, Don't Do IT

I recently upgraded from Leopard to Snow Leopard and also iphoto 08 to the current 11 (9.1.1) While 08 worked just fine, 11 is a complete dog with the SBB running almost constantly. I don't know if its faces or just my collection is too big (~30,000 pics), or my IMAC is too old, but is there anyway to make this better without going back to 08?
On a side note, I think the new interface is really poor, with 10X the amount of mouse travel from one corner to the other. I can't seem to edit with picture information viewable at the same time, and "full screen" apparently doesn't really mean full screen. Any thoughts on if Apeture will work any better? This whole upgrade experience to something that is clunkier, slower, 10x the mouse movements, all with "new" looks is so PC-like, it brings up bad memories.

I see you have been clobbered by the email changes within iphoto,
Since 9.1.1 you can email exactly the same way as you could in earlier versions.
but I always found it helpful to edit photos with photo information visible at the same time. Is there no way to do this now?
None that I can see.
Can faces be turned off?
No. Once it's finished the first scan you can just ignore it.
Does rebuilding your library using Library Manager have risks?
Everything has risks. Make a back up first. Note also what's not in the rebuilt Library.
n your opinion is Apeture likely to handle 35000 pics better or is it just a bigger monstrosity using more cpu and bringing things to a slower crawl?
I have no answer for that question. I use Aperture all the time and I have no issues with it. It's a much more powerful app. But wander over to the Aperture forum and you'll see a share of those "Aperture is a Disaster, the sky is falling and Apple is turning into Microsoft" posts there too
When Aperture was $199 I used to say that unless you shoot large volumes of Jpeg or are shooting Raw there wasn't much value n it. But with the price down at $80 you may feel differently.
It's tempting to think of Aperture as iPhoto Pro, or iPhoto's big brother, but it's not. It's a very different app. Iphoto is designed with the home shooter, a guy with a point and shoot camera who wants to manage his snaps, make a book or handy slideshow and make it easy for him to send the kid's birthday pics to GrandMa. Those are the features front and centre in the app.
Aperture is designed for the Pro user. It can do these things too, but they are not front and centre. Front and centre is managing very high volumes of images and processing the outturn from a shoot. If iPhoto is about importing, fixing and sharing 30 pics from the kid's birthday, Aperture is about importing processing and finishing 2,500 from the Wedding you shot today, and you need to get it done today because you'll shoot another 2,500 at one tomorrow.
There is an Aperture trial available at http://www.apple.com/aperture/ (see at bottom right) and that's the best way to tell.
Regards
TD

Jannuary 2014 -I need Upgrade from ios 4.3.5 to version 0.6.x -NO ios 7!-

my iphone is MC605lP (iphone 4)
the system is now in use ios 4.3.5 (8L1)
I never upgraded to ios 7
I need to upgrade from ios 4.3.5 to version 6.x.x or better for my iphone 4
NO ios 7.x.x !!!!
Help can someone tell me how?
Regards
Stefano

But many people on the web say: os 7 does not work on the old phone! (it will be true?)
I'm afraid of losing the performace of the iPhone (and the data).
so ... I can not get the right version because I forgot to download it?
Are you sure?

Decided to upgrade from an old PowerBook G4, mostly for eyesight issues. Bought a new Mac Mini and hooked it up to an Apple A1267 Cinema Monitor. I cannot even figure out how to turn them on. Help please.

I am exhausted just getting to the point of being allowed to ask my question. I recently decided to upgrade from an old PowerBook G4 that we have used for years, and am using now. I bought a new Mac Mini and a reconditioned Apple A1267 Monitor that was working beautifully when hooked to a slightly newer PowerBook in the store. Both the Mini and the monitor are plugged in, and attached to each other but I feel light a dolt. I cannot even figure out how to turn them on or even get a power light to come on. Can someone help me?

How is the Mini coonected to the momitor?
Does the power button n the mini not work?

HT204053 Can't get rid of old ID from previous owner when need upgrades from APP Store?

My son set up his acct when he download most of the APP Store, few months later I downloads few more in his name till his ID doesn't work, so I decide to change into my name in acct, however when the APP show need upgrade those games etc.. Still automatic to his name . I seem can not get it to change to my name. Does that mean I have to download ITune Store reprogramming ?

You cannot change the iTunes store account from his to yours and continue to use the purchases made from his account. I'm not quite sure why his account no longer works, there is no reason why it shouldn't.

Help with upgrading from Photoshop Elements to Lightroom 3

Any tutorials/books/best practices on upgrading from PSE to LR 3? I have thousands and thousands of photos in PSE, and I'm sure the upgrade is not as transparent and smooth as Adobe promotes it to be.
Any suggestion, advice or past experience will be greatly appreciated.

here is a set of instructions on doing what you want.
Randy
Playnwmadness
Home / Using Photoshop Lightroom 3 / Importing photos
Import photos from Photoshop Elements
Was this helpful?YesNo
Lightroom detects if your computer has a Photoshop Elements catalog and can import photos and data from the PSE catalog into a new Lightroom catalog. Lightroom imports photos and data from Photoshop Elements 6 and later on Windows. Lightroom imports photos and data from Photoshop Elements 9 on Mac OS.
Note: For help troubleshooting errors or problems when importing PSE catalogs into Lightroom, see the Adobe Support article Lightroom 3 cannot upgrade Photoshop Elements catalogs (cpsid_85517).
In the Library module, choose File > Upgrade Photoshop Elements Catalog.The Upgrade Photoshop Elements Catalog dialog box displays the most recently opened Photoshop Elements 6 (PSE6), Photoshop Elements 7 (PSE7), or Photoshop Elements 8 (PSE8), or Photoshop Elements 9 (PSE9) catalog.
To choose a different PSE catalog, click the Photoshop Elements drop-down menu.
To change the destination of the new Lightroom catalog, click Change and navigate to a different folder.
Click Upgrade to import the PSE catalog into a new Lightroom catalog.

Hdmi cable doesn't fit, upgraded from old 21 imac...5yrs old to new 27 imac..the hdmi plug doesn't fit. any suggestions?

i used to have a hdmi input on my older 21 inch mac that displayed my imac on the lcd tv... the plug from the old imac won't fit into my new 27 inch imac.. any suggestions? also my firewire external hard drive plug doesn't fit into any of the inputs... yikes! Thanks for any help!

Not sure what adapter cable you have but if your new machine is a mid 2011 iMac you need this cable. Not a replica of the cable you need the adapter cable Apple sells:
http://store.apple.com/us/product/H1824ZM/A/Moshi_Mini_DisplayPort_to_HDMI_Adapt er?fnode=MTY1NDA3Ng

Upgraded from PE9 to PE12: ratings did not transfer on organizer

Upgraded from PE9 to PE12 and the ratings and tags did not transfer to the organizer - or maybe they are there, but I do not know how find.
I also upgraded from Vista to Microsoft 7. Do I need to uninstall the Vista version and reinstall, or is there a different solution?

Topteke a écrit:
Upgraded from PE9 to PE12 and the ratings and tags did not transfer to the organizer -
When you installed PSE12 and opened the organizer, you should have been asked to convert your catalog. That would have created a new catalog with the contents of your old catalog; that old catalog being still available to PSE9. If, instead of letting the conversion automatically take place, you have simply imported your pictures into the new empty PSE12, the tags and captions are not recovered (unless you specifically 'wrote metadata to files' in the PSE9 organizer).
Now, use the menu file/catalog (Ctrl Maj C) and click on the 'convert' button. Check the option to show already converted catalogs. You should see your PSE9 catalog and start the conversion.

Can one upgrade from LP9 to LPX or is it a complete new purchase? Does it load as a separate program or does it integrate into LP9?

It's still cheap at the price but one used to be able to purchase an upgrade. What happens now?
Does the download integrate with LP9 or is it a complete new program/

There are no upgrades.. or discounts...
Logic Pro X is considered a separate program (as are all App Store sold programs these days) to LP9 and so there is no discount if you own an earlier version of Logic Pro
Note: The cost of LPX is actually much less than it used to cost to upgrade from say, LP8 to LP9... so while there is no upgrade pricing, the new version costs less than it would have cost to upgrade from a previous version, in the past anyhow... and by quite some degree.
Example: To upgrade from LP8 to LP9 cost $499 originally.... whereas the full version of LPX only costs $199
LPX is kept as a separate program on your Mac so if you have LP9 already installed.. you can continue to run and work with LP9 if you wish. (for creating and working with projects for example, that contained 32bit AU plugins which LPX no longer supports)
LPX and LP9 also do share some content between them... but LPX comes with a lot of new content that is not available in LP9.
Note: LPX can import projects created/saved in LP9 but LP9 cannot import projects created/saved in LPX.

Help needed upgrading from 4.1 to 6.2 for transfer to new Pre

Similar Messages

Maybe you are looking for