HELP NEEDED URGENTLY - Account suspended and unabl...

hi all,
I have been using skype for three years, and my account was suspended on 3rd Nov 2013, I don't know what's happening with my account and I need my account to be released ASAP.
Regards,
Xiang Zhou

zjhnzx wrote:
I am completelty stucked now because I am not eligible for making phone call. I can't get my account released at all. Please kindly help what shall I do next???!!! Do I need to provide any ID documents to prove myself?
Thanks.
Xiang
stucked at what particular stage or process? have you contacted support already? if so, what did they say?
CONTACT SKYPE CUSTOMER SERVICE | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUPICIOUS CALLS AND MESSAGES | WINDOWS PROBLEMS TROUBLESHOOTING | SKYPE DOWNLOAD LINKS
MORE TIPS, TRICKS AND UPDATES AT
skypefordummies.blogspot.com

Similar Messages

Re: HELP NEEDED URGENTLY - Account suspended and u...

I have trying for over a week to replenish my skype account with a new credit card, yet after trying several times and with several different cards it will not credit my account.

Hello,
Using some else's thread is not only unfair to the thread starter but can lead to confusion and cause difficulty for those who are trying to assist you. Please start your own thread here.
Your issue is completely different to that of the person whose thread you infiltrated.
If you have a payment issue please contact Skype customer service as users here on the community can't help you with those. To help you find the right place for these types of questions please feel free to use the following links:
Refund requests
Problems with credit card/ PayPal payments
Other payment issues
General Payment and prices help
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

HELP NEEDED URGENTLY - Account suspended

I was web browsing when all of a sudden my skype was disconnected.
I have had this account well over 13 years, because of the length of time I have had the account I couldn't remember my password, so I clicked on the forgotten password in skype. It said check your email for a password reset.
I logged into email and found the following email. Along with it a password reset page, I went to reset my password and got contact Customer Service. I cannot access my skype at all.
Unauthorized activity on your Skype account
Due to unusual activity, we've suspended your account, myusername, as a precaution. We take security seriously at Skype and we've taken this measure as we suspect that your details might have fallen into the wrong hands.
Learn more about other reasons your account might have been suspended and the ways in which you can confirm your identity and release your account.
Talk soon,
The people at Skype

I think your best next course of action is to contact customer service regarding your concern. Just click the link below to see the instructions on how you can get in touch with the Support team ;
https://support.skype.com/en/faq/FA1170/how-can-i-contact-skype-customer-service (or [email protected] if you will not be able to use their webform).
CONTACT SKYPE CUSTOMER SERVICE | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUPICIOUS CALLS AND MESSAGES | WINDOWS PROBLEMS TROUBLESHOOTING | SKYPE DOWNLOAD LINKS
MORE TIPS, TRICKS AND UPDATES AT
skypefordummies.blogspot.com

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help...............

HT201210 i have an error of no 11. kindly help, needed urgently

i have an error of no 11. kindly help, needed urgently
when i try to upgrage my
iphone 3gs wit 4.1 to new latest 5.1
it gives the erorr of 11. what that mean? Reply as soon as you can !
thnx

Error -1 may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.

Some J2ME midlets doubts!! help needed urgently!!!

Hi,
I am currently working in a company where it does wireless technology like WAP and I am assigned a task of creating a screensaver midlet. I have some doubts on the midlets.
1) How do i use a midlet suites? From what I heard from my colleagues & friends, a servlet is needed for midlets to interact with one another. is it true?
2) How do I get the startin midlet to take note the phone is idling so that the screen saver midlet can be called?
Help needed urgently... if there is any source codes for me to refer to would be better... Thanks...
Leonard

indicates that MIDlet suites are isolated (on purpose) from each other, so you can't write over another one's address space.
Also, I believe (at least on cell phones) that you have to specifically enter the Java Apps mode; unless you do the app won't execute. If you are in Java apps mode and a call comes in, the cell's OS puts the Java app currently executing on "Pause" mode and switches back to phone mode.
Not sure if you will be able to have a Java app do that automatically.
BTW why do you need a screensaver on an LCD display? Is it really intended to show an advertisement?
Download and real all the docs you can from Sun, once you get over the generic Java deficiencies MIDlet's aren't that hard.

I would like to inform you that my account suspended and I can not update applications have been refused my credit card and when my review of a bank to get the reason for the refusal card, the bank employee as explained by you please do me a proper soluti

I would like to inform you that my account suspended and I can not update applications have been refused my credit card and when my review of a bank to get the reason for the refusal card, the bank employee as explained by you please do me a proper soluti

We are all itunes users just like you. Informing us is of little use.
Contact itunes support

Load bar at start up, then shut down. HELP NEEDED URGENTLY!!! plss....

Load bar at start up, then shut down. HELP NEEDED URGENTLY!!! plss..

The startup disk may need repairing.
Startup your Mac while holding down the Command + R keys so you can access the built in utiliites to repair the startup disk if necessary or restore OS X using OS X Recovery

Opening hotmail: Please refresh your browser window, When you access your Windows Live Hotmail account from more than one computer, we ask you to sign in again to help keep your account private and secure . Refreshed but no change. in Safari no problem

opening hotmail in firefox: Please refresh your browser window, When you access your Windows Live Hotmail account from more than one computer, we ask you to sign in again to help keep your account private and secure . Refreshed but no change. in Safari no problem

Go to '''Options '''on Firefox Browser-->'''Advanced'''-->''Click on'' '''Network '''tab-->''Select '''''Settings'''-->''Select '''''Use System Proxy Settings
'''

Unable to allocate 27160 bytes.........Help needed urgently

hi
in my production database in getting this error..
ORA-04031: unable to allocate 27160 bytes of shared memory ("shared
pool","unknown object","sga heap(1,0)","session param values")
help needed urgently

If you have a program that does not use bind variables you can get this error.
In such cases you do not want to increase the size of the shared pool, but reduce it, and flush regularly. This is a bug in the application and should be fixed to use bind variables.
Another possible workaround is setting cursor_sharing = force, but this can cause other problems, so should only be used as a last resort. If the apps connections can be distinguished by user account or machine, then a log on trigger could be set cursor_sharing just for that application, to limit the damage until the vendor can fix it.

Account suspended and can't use subscription

Dear Skype
Please do the needful, I already subscribed a subscription for India one month subscription and skype credit for 10 Dollars out of that amount I used 2.19 dollars.
but now I cant use my subscription and skype credit, due to that I m distrube to calls to my family and friends. Kindly lookinto and rectify the error from my account as soon as possiable.
your quick response will highly appreciated.
Thanks and Regards
[Removed for privacy]

Please follow the instructions here to get your account recovered again: https://support.skype.com/en/faq/FA10946/why-is-my-account-suspended
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Help needed Urgently- Rebate based on collected amount

Dear all,
I come across scenario while discussiion with client that they require rebate with collection. Details of the requirement are given below:
1. SAP rebates run on billed values & set the accrual in rebate agreement on the rate what we have specified in the rebate agreement. Requirement is that, If i have billed on 1000$ & my accrual value is 100$ with the rate of 10%. If i collected 800$ instead of 1000$, then i need to pay the accrual on the basis of 800$ not on the basis of 1000$. It means i have to adjust accrual amount on the basis of 800$. Conclusion is that i have to pay not 100$ accrual instead less then 100$ on the basis of 800$ which i collected.
2. In month 1 have billed on 5000$, my accrual amount is 500$ with rate of 10%. In the 2nd month i have to bill 1000$ and i have given an discount of 500$, it means my billed value is 500$ and my accrual amount is 50$@10%. In month 3 again i billed 500$ and my accrual amount is 50$@10%.
Requirement is that, when i am going to pay the accrual to client, i should pay correct accrual for which he is entitled for. Means i should pay 100$ accrual not 600$ because i have already given an discount of 500$. Discount which i have given already of 500$ should need to be offest with the first month accrual of 500$. So remaning accrual is 100$.
Great if somebody can help me out for the solutioning of the above requirements.

Thanks Ivano,
Somebody has started the conversation.
Let me put my questions again.
This requirement is nothing to do with Payment procedure in the agreement type.
1. In any month if i billed 1000$, so my account receivable would be 1000$. My rebate for that month is 100$ at the rate of 10%. During customer receipt if i collected against my invoice 900$ instead of 1000$, my accrual needs to be corrected 90$ instead of 100$.
I know this can not be fullfilled by standard SAP, by any thoughts on this welcomed.
2. I know Rebate can be settled partially or full settlement by payment method( by cheque, bank transfer, or by credit memo) we have configure in rebate agreement type. But here requirement is totally different.
Here, i need to pay the Rebate as a Discount instead of by cheque or by credit memo. While doing the partial or full settlement system will take into account collected accrual up to that day & apply as a discount to the final bill.
Scenario is like that sometimes customer asked to give us the discount on bill for whatever they accrued so far.
This is again cannot solved by standard SAP, but any thought by any body welcome. We have already thought that we need to enhance the solution.
Solution needed urgently.

Unable to open account sometimes and unable to open icons

today i turned on my laptop entered my user account password and connected to my internet .within 2 minuites of opening my internet my computer froze .so i turned it off by pressing the off button . after 2 min i turned the computer back on again . but this time when i scrolled over my account name i was unable to enter my password , the box would not open to do so . so again i closed the computer down , restarted it and was able to open my account . but this time im unable to click open any icons such as FINDER , SAFARI , SYSTEMS PREFERANCE, OR any icons on the top tool bar .
there is just a coloured circle when i scroll on top icons on placed middle of screen .
how can i restore my laptop to normal
i have good power supply and battery and this is the first time in 4 years since i had it
the info i found about my mac pro is as follows
MAC OS X
VERSION 10.6.8
HOPE THIS HELPS
THANK YOU

Hi jimmy202011!
Judging from the issues you are having, you may want to try to reinstall the operating system on your computer. We have an article that explains how to do that without losing your files, and it can be found right here:
Mac OS X 10.6: Reinstalling Mac OS X
http://support.apple.com/kb/PH6606
This article does claim that this process will not affect the personal files on your computer, but as with any process that will modify the operating system on your computer, you will want to back up the files on your computer as a safety precaution before you perform this process. Thanks for using the Apple Support Communities. Have a good one!
-Braden

HELP NEEDED URGENTLY BY LAME BRAINED IDIOT!!

I have just purchased second hand my Imac G5 running OS X 10.3.5.
I have (stupidly?) erased (sent to waste bin) ALL previously installed data/files from the internal main drive.
Now when i start the machine and attempt to reinstall the original OS disks or do anything I get a major Kernal Panics message.
Message starts unable to find Powerbook 8,1 driver.
Followed by half a screen of text I do not understand.
Message ends with "panic: we are hanging here ..."
A message behind this text reads to restart your system, if not turned off the internal fan does an impression of a Harrier Jump Jet taking off!...makes such a loud noise like it's gonna blow up!!!
I've never used a Mac before do not know the terminology for these systems,don't even really know how to navigate around the screen menus etc.
I have 3 original disks that read Mac OS install disk 1 & Mac OS install disk 2 also iMac G5 additional software & apple hardware test.
I cannot get past paic screen to load these disks.
*It's gonna take a very special person that can translate and make this strategically shaved monkey understand how I can fix this problem.*
*Whoever helps to get me up and running will surely be rewarded in Heaven!!!*
Regards
Rufus Pimpenstein III.

Rufus, from one "strategically shaved monkey" to another - welcome to the discussions!
Those kernel panics are probably due to a number of problems, but since you bought your iMac second hand, I would suggest that you do an "erase and install" of the OS and appplications as shown here.
The fans are kicking in because the fan control software cannot be loaded and it is going to the full-bore setting to protect the machine.
If that is what you tried already, then a few other suggestions from Dr. Smoke about resolving those kernel panics.
Make sure that you unplug all USB and FireWire devices - except the keyboard and mouse of course - while doing any further troubleshooting. You want to narrow it down as much as possible.
Be sure to post back here for more help if needed. There are plenty more shaved apes and other simians that can help you here - LOL!

Help needed urgently on a problem..plzzz

hi..this is a linear congruential generator. I have to implement it and i need the execution time for the program.
for your understanding i'm providing an example below.
Xn=(( a* xn-1 )+b) mod m
If X0=7 ; a = 7 ; b =7 ; m=10
Then
X0 = 7
X1 =((7 * 7) + 7))mod 10 = 6
X2 = ((6*7)+7))mod 10 = 9
X3 = ((9*7)+7) mod 10 = 0
X4 = ((0*7)+7) mod 10 = 7
Now since the cycle is being repeated i.e 7 appears again�so the period is 4 coz there are 4 diff nos. i.e 7,6,9,0�..
help required urgently....your help will be appreciated...thankyou..

Hi,
I wrote the code so that it catches any cycle (not only the "big" one).
Otherwise it will enter infinite loop...
The time complexity is O(N*logN): it can do at most N iterations (here N is your 'm'), and in each iteration there can be O(log N) comparisons (since I maintain TreeSet).
Interesting issue: is it possible to supply such (x0, a, b, m) tuple such that all possible values from 0 to m-1 will be output? I think no :)
Here is the program:
package recurr;
import java.util.TreeSet;
import java.util.Comparator;
public class Recurrences {
     private static long x0, a, b, m;
     private static TreeSet theSet;
     public static void main(String[] args)
          long l0, l1, l2, l3;
          try {
               x0 = Long.parseLong(args[0]);
               a = Long.parseLong(args[1]);
               b = Long.parseLong(args[2]);
               m = Long.parseLong(args[3]);
          } catch(NumberFormatException nfe) {
               nfe.printStackTrace();
          System.out.println("X[0]: " + x0 + "\n");
          long curr = x0;
          boolean cut = false;
          int i;
          // initialize the set
          theSet = new TreeSet(new LongComparator());
          // we can get at most m distinct values (from 0 to m-1) through recurrences
          for(i=1; i <= m; ++i) {
               // iterate until we find duplicate
               theSet.add(new Long(curr));
               curr = recurrence(curr);
               if(theSet.contains(new Long(curr))) {
                    cut = true;
                    break;
               System.out.println("X[" + i + "]: " + curr + "\n");
          if(cut) {
               System.out.println("Cycle found: the next will come " + curr + "\n");
          } else {
               System.out.println("No cycle found!");
          System.out.println("----------------------------------");
          System.out.println("Totally " + (i-1) + " iterations");
     private static long recurrence(long previous)
          return (a*previous + b)%m;
     static class LongComparator implements Comparator
          public int compare(Object o1, Object o2)
               if(((Long)o1).longValue() < ((Long)o2).longValue()) {
                    return -1;
               } else if(((Long)o1).longValue() > ((Long)o2).longValue()) {
                    return 1;
               } else return 0;
}

HELP NEEDED URGENTLY - Account suspended and unabl...

Similar Messages

Maybe you are looking for