Help needed urgently!! z10 was locked by blackberry protect and unable to unlock

I locked my z10 from blackberry protect this morning. but when I tried to unlock it I got a trouble. because i need to type in the password but the keyboard does not show up in z10 and I cannot type in the password to unlock it. does anyone knows how to solve it? thanks.
Solved!
Go to Solution.

solved. rebooted the device and then keyboard showed up this time, typed in the passed, unlocked. haha....

Similar Messages

HT201210 i have an error of no 11. kindly help, needed urgently

i have an error of no 11. kindly help, needed urgently
when i try to upgrage my
iphone 3gs wit 4.1 to new latest 5.1
it gives the erorr of 11. what that mean? Reply as soon as you can !
thnx

Error -1 may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.

Some J2ME midlets doubts!! help needed urgently!!!

Hi,
I am currently working in a company where it does wireless technology like WAP and I am assigned a task of creating a screensaver midlet. I have some doubts on the midlets.
1) How do i use a midlet suites? From what I heard from my colleagues & friends, a servlet is needed for midlets to interact with one another. is it true?
2) How do I get the startin midlet to take note the phone is idling so that the screen saver midlet can be called?
Help needed urgently... if there is any source codes for me to refer to would be better... Thanks...
Leonard

indicates that MIDlet suites are isolated (on purpose) from each other, so you can't write over another one's address space.
Also, I believe (at least on cell phones) that you have to specifically enter the Java Apps mode; unless you do the app won't execute. If you are in Java apps mode and a call comes in, the cell's OS puts the Java app currently executing on "Pause" mode and switches back to phone mode.
Not sure if you will be able to have a Java app do that automatically.
BTW why do you need a screensaver on an LCD display? Is it really intended to show an advertisement?
Download and real all the docs you can from Sun, once you get over the generic Java deficiencies MIDlet's aren't that hard.

Load bar at start up, then shut down. HELP NEEDED URGENTLY!!! plss....

Load bar at start up, then shut down. HELP NEEDED URGENTLY!!! plss..

The startup disk may need repairing.
Startup your Mac while holding down the Command + R keys so you can access the built in utiliites to repair the startup disk if necessary or restore OS X using OS X Recovery

My iPhone 4 randomly was lighting up without touching it even would do it continiusly while it was locked; then will stop and 2 min later would do the issue again.I have 5.1.1 iOS installed in it and I even try to recover it , still the problem remains

My iPhone 4 randomly was lighting up without touching it even would do it continiusly while it was locked; then will stop and 2 min later would do the issue again.I have 5.1.1 ios installed in it and I even try to recover it , still the problem is not solved , Thou when I put the phone on charging than the display light does not glow again and again. Kindly help to solve this issue.

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

HT4061 i'm locked out my iphone and unable to get in?

i'm locked out my iphone and unable to get in? my phone says phone disabled go to itunes.

iOS: Unable to update or restore - Support - Apple

I have a phone that is locked to a network and unable to change the sim even though this is my phone brought not locked

I have a phone that is locked to a network and unable to change the sim even though this is my phone brought not locked

You only think you bought it not locked. It is locked to a carrier. Where did you buy it? The only legitimate place to buy an unlocked iPhone is directly from Apple. No other source is authorized to sell unlocked phones.

Hi. I have an iphone 3gs ios vers 4.1 it was locked to Vodafone but I had them unlock it. Can I update to ios vers 6 and will it still be unlocked. Most apps need vers 4.3 or higher to download. Thanks

Hi, I am new to this forum so please excuse anything I may say that sounds a bit stupid but I am not very technically minded.
I have got an iPhone 3gs ios version 4.1. The phone was locked to Vodafone and I asked them to unlock it which they did. I connected the phone to iTunes and it said congratulations your phone is now unlocked. My new Tesco sim card was accepted and the phone works fine. I have tried to download some apps but they all seem to need a higher version of the ios. iTunes says there is an update for my phone ios version 6. I need to know if I update my phone to this version will my phone still be unlocked and also will the phone continue to work properley. Hope someone can help.
Thanks DaveB

Happy to have been of help. Hope all goes smoothly.
BTW, for the sake of others who may help you here, it's usually most polite if you mark the post that answered your question as being the one that "solves" it, not your own post. That's how people get points here, if a questioner marks their post as either "helpful" or "solving". It's not an issue for me, but for those just starting out in the forums it may be important to them. See:
https://discussions.apple.com/static/apple/tutorial/mark.html
and
https://discussions.apple.com/static/apple/tutorial/reputation.html
Regards.

New to XI (help needed urgent)

hi all i am new to XI . i have just started learning . so if any one have some documents regarding it then plz share with me.iam lookig for the documents in following areas
1. XI Fundamentals.
2. Mapping Concepts.
3. Adapters Concepts.
4. Business Process Management Concepts.
5. Mapping,Adapters and BPM.
i will be grateful to u and ur efforts.
i will also give points for ur efforts.
my id - [email protected]
plz i am looking for all ur helps.
its very urgent
Message was edited by: sanjeev singh

Hi,
This is very good document regargding mapping
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/190eb190-0201-0010-0ab3-e69f70b6c257
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9202d890-0201-0010-1588-adb5e89a6638
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6658bd90-0201-0010-fbb6-afe25fb398d3
Regards,
Prakash

Help needed urgently on a problem..plzzz

hi..this is a linear congruential generator. I have to implement it and i need the execution time for the program.
for your understanding i'm providing an example below.
Xn=(( a* xn-1 )+b) mod m
If X0=7 ; a = 7 ; b =7 ; m=10
Then
X0 = 7
X1 =((7 * 7) + 7))mod 10 = 6
X2 = ((6*7)+7))mod 10 = 9
X3 = ((9*7)+7) mod 10 = 0
X4 = ((0*7)+7) mod 10 = 7
Now since the cycle is being repeated i.e 7 appears again�so the period is 4 coz there are 4 diff nos. i.e 7,6,9,0�..
help required urgently....your help will be appreciated...thankyou..

Hi,
I wrote the code so that it catches any cycle (not only the "big" one).
Otherwise it will enter infinite loop...
The time complexity is O(N*logN): it can do at most N iterations (here N is your 'm'), and in each iteration there can be O(log N) comparisons (since I maintain TreeSet).
Interesting issue: is it possible to supply such (x0, a, b, m) tuple such that all possible values from 0 to m-1 will be output? I think no :)
Here is the program:
package recurr;
import java.util.TreeSet;
import java.util.Comparator;
public class Recurrences {
     private static long x0, a, b, m;
     private static TreeSet theSet;
     public static void main(String[] args)
          long l0, l1, l2, l3;
          try {
               x0 = Long.parseLong(args[0]);
               a = Long.parseLong(args[1]);
               b = Long.parseLong(args[2]);
               m = Long.parseLong(args[3]);
          } catch(NumberFormatException nfe) {
               nfe.printStackTrace();
          System.out.println("X[0]: " + x0 + "\n");
          long curr = x0;
          boolean cut = false;
          int i;
          // initialize the set
          theSet = new TreeSet(new LongComparator());
          // we can get at most m distinct values (from 0 to m-1) through recurrences
          for(i=1; i <= m; ++i) {
               // iterate until we find duplicate
               theSet.add(new Long(curr));
               curr = recurrence(curr);
               if(theSet.contains(new Long(curr))) {
                    cut = true;
                    break;
               System.out.println("X[" + i + "]: " + curr + "\n");
          if(cut) {
               System.out.println("Cycle found: the next will come " + curr + "\n");
          } else {
               System.out.println("No cycle found!");
          System.out.println("----------------------------------");
          System.out.println("Totally " + (i-1) + " iterations");
     private static long recurrence(long previous)
          return (a*previous + b)%m;
     static class LongComparator implements Comparator
          public int compare(Object o1, Object o2)
               if(((Long)o1).longValue() < ((Long)o2).longValue()) {
                    return -1;
               } else if(((Long)o1).longValue() > ((Long)o2).longValue()) {
                    return 1;
               } else return 0;
}

Help needed Urgently- Rebate based on collected amount

Dear all,
I come across scenario while discussiion with client that they require rebate with collection. Details of the requirement are given below:
1. SAP rebates run on billed values & set the accrual in rebate agreement on the rate what we have specified in the rebate agreement. Requirement is that, If i have billed on 1000$ & my accrual value is 100$ with the rate of 10%. If i collected 800$ instead of 1000$, then i need to pay the accrual on the basis of 800$ not on the basis of 1000$. It means i have to adjust accrual amount on the basis of 800$. Conclusion is that i have to pay not 100$ accrual instead less then 100$ on the basis of 800$ which i collected.
2. In month 1 have billed on 5000$, my accrual amount is 500$ with rate of 10%. In the 2nd month i have to bill 1000$ and i have given an discount of 500$, it means my billed value is 500$ and my accrual amount is 50$@10%. In month 3 again i billed 500$ and my accrual amount is 50$@10%.
Requirement is that, when i am going to pay the accrual to client, i should pay correct accrual for which he is entitled for. Means i should pay 100$ accrual not 600$ because i have already given an discount of 500$. Discount which i have given already of 500$ should need to be offest with the first month accrual of 500$. So remaning accrual is 100$.
Great if somebody can help me out for the solutioning of the above requirements.

Thanks Ivano,
Somebody has started the conversation.
Let me put my questions again.
This requirement is nothing to do with Payment procedure in the agreement type.
1. In any month if i billed 1000$, so my account receivable would be 1000$. My rebate for that month is 100$ at the rate of 10%. During customer receipt if i collected against my invoice 900$ instead of 1000$, my accrual needs to be corrected 90$ instead of 100$.
I know this can not be fullfilled by standard SAP, by any thoughts on this welcomed.
2. I know Rebate can be settled partially or full settlement by payment method( by cheque, bank transfer, or by credit memo) we have configure in rebate agreement type. But here requirement is totally different.
Here, i need to pay the Rebate as a Discount instead of by cheque or by credit memo. While doing the partial or full settlement system will take into account collected accrual up to that day & apply as a discount to the final bill.
Scenario is like that sometimes customer asked to give us the discount on bill for whatever they accrued so far.
This is again cannot solved by standard SAP, but any thought by any body welcome. We have already thought that we need to enhance the solution.
Solution needed urgently.

HELP NEEDED URGENTLY BY LAME BRAINED IDIOT!!

I have just purchased second hand my Imac G5 running OS X 10.3.5.
I have (stupidly?) erased (sent to waste bin) ALL previously installed data/files from the internal main drive.
Now when i start the machine and attempt to reinstall the original OS disks or do anything I get a major Kernal Panics message.
Message starts unable to find Powerbook 8,1 driver.
Followed by half a screen of text I do not understand.
Message ends with "panic: we are hanging here ..."
A message behind this text reads to restart your system, if not turned off the internal fan does an impression of a Harrier Jump Jet taking off!...makes such a loud noise like it's gonna blow up!!!
I've never used a Mac before do not know the terminology for these systems,don't even really know how to navigate around the screen menus etc.
I have 3 original disks that read Mac OS install disk 1 & Mac OS install disk 2 also iMac G5 additional software & apple hardware test.
I cannot get past paic screen to load these disks.
*It's gonna take a very special person that can translate and make this strategically shaved monkey understand how I can fix this problem.*
*Whoever helps to get me up and running will surely be rewarded in Heaven!!!*
Regards
Rufus Pimpenstein III.

Rufus, from one "strategically shaved monkey" to another - welcome to the discussions!
Those kernel panics are probably due to a number of problems, but since you bought your iMac second hand, I would suggest that you do an "erase and install" of the OS and appplications as shown here.
The fans are kicking in because the fan control software cannot be loaded and it is going to the full-bore setting to protect the machine.
If that is what you tried already, then a few other suggestions from Dr. Smoke about resolving those kernel panics.
Make sure that you unplug all USB and FireWire devices - except the keyboard and mouse of course - while doing any further troubleshooting. You want to narrow it down as much as possible.
Be sure to post back here for more help if needed. There are plenty more shaved apes and other simians that can help you here - LOL!

Ipad Email outgoing settings help needed (URGENT!)

Hi,
I wonder if you can help me. I'm currently at my Grandparents and have realised that I am completely unable to send emails from my Talk Talk email accounts. I had previously resigned myself to suffering this fate with this talk talk email as it didn't work at home either but I recently found out the plusnet relay settings so am using it again. Now, my Grandparents where I'm staying have BT it it doesn't send.
So, I have gone into my Granddad's account to had my email aprroved and verified, and have set up the following server settings under other SMTP servers;
Host Name- Mail.btinternet.com
User name- MY GRANDDAD'S EMAIL
Password- His password
SSL on
Authentication= password
Port= 465
And turned this new server on, yet when I go to send something it tells me the receipents email was rejected by the server an it is placed in the outbox. I must be doing something wrong- please help! Bt's help is no help as it tells me to call an expensive line!
Thanks,
-S Bullock
P.S. If I set this up correctly, would this mean that when I am attatched to lets say my Uncles BT internet I would still be able to send emails using my Granddad's verified account?

Hi,
I wonder if you can help me. I'm currently at my Grandparents and have realised that I am completely unable to send emails from my Talk Talk email accounts. I had previously resigned myself to suffering this fate with this talk talk email as it didn't work at home either but I recently found out the plusnet relay settings so am using it again. Now, my Grandparents where I'm staying have BT it it doesn't send.
So, I have gone into my Granddad's account to had my email aprroved and verified, and have set up the following server settings under other SMTP servers;
Host Name- Mail.btinternet.com
User name- MY GRANDDAD'S EMAIL
Password- His password
SSL on
Authentication= password
Port= 465
And turned this new server on, yet when I go to send something it tells me the receipents email was rejected by the server an it is placed in the outbox. I must be doing something wrong- please help! Bt's help is no help as it tells me to call an expensive line!
Thanks,
-S Bullock
P.S. If I set this up correctly, would this mean that when I am attatched to lets say my Uncles BT internet I would still be able to send emails using my Granddad's verified account?

ParseDTDBuffer error-Help Needed urgently.

Hi all,
I wanted to parse a one line dtd and so i used the xmlparser.parseDTDBuffer() function.In this usage i got a strange error.The program reported no error at compile time but an error was reported at run time and error was stating the non-availability of the method.But when i used a 'desc sys.xmlparser' method i found the function with the same syntax.Please help me with the reason for this error.I enclose the error message and usage statement of the function:-(creatememoryclob is my function and root is also a varchar element.
dtd varchar2(100);-- declaration
dtd:='<!ELEMENT family (member*)>';-initialization
sys.xmlparser.parseDTDBuffer(p,dtd,root);-usage
error:-
ERROR at line 1:
ORA-29531: no method parseDTDBuffer in class
oracle/xml/parser/plsql/XMLParserCover
ORA-06512: at "SYS.XMLPARSERCOVER", line 0
ORA-06512: at "SYS.XMLPARSER", line 115
ORA-06512: at "IWADM.CREATEDOCMEMORYCLOB", line 14
ORA-06512: at line 10
Any help will be really helpful
regards
Gopal

What are the DB version and XDK version?

Help needed urgent please ( parallel port access in linux)

hi all, i am trying to read and write data to /from the parallel port , i am running IBM j9 vm on linux.under /dev there are lp0..lp3 parport0..parport3, and port devices , i dont know which one to use , i have tried all , they all return with an ioexception saying "cannot find the file" except for port device which does not generate any error but it does not return what i have written on it ,
any help would be much appreciated.
i am using fileoutputstream and printwriter calsses .
i dont want to use javax.comm api cause i think its incompatible with ibms visual age micro edition ( the one i am using ) so i would prefer something that works with my IDE .
thanks
yahya
[email protected]

However, there is an on-going OpenSource version called "RXTX" (http://jarvi.ezlink.com/rxtx/) that works quite well. Be sure to read all the documentation that comes with it, as you'll need to set some permissions on the ports you want to use.

Help needed urgently!! z10 was locked by blackberry protect and unable to unlock

Similar Messages

Maybe you are looking for