Help needed using adobe exportpdf

The first time I used adobe export pdf it worked well. However the next time and every other time I try to convert a pdf doc to word docx I get the error message at the end of the uploading session. "pdf doc failed to export to m,icrosoft word. There was an unexpected problem.
Anyone overcome this problem?

Hi Stacy
               Thanks for that info. I was aware of the 100MB limit but
your response made me think again and go back to the problem and this is
what I found. The first pdf document I uploaded into Adobe export pdf was 43
MB and it went through fine. when I looked at the conversion to Word docx I
found it had been transformed into 83MB.
So the conversion (which was a children's book with lots of images in it)
resulted in an increase of MBs by a factor of 1.7.
The second pdf document I uploaded was 64MB and this failed. If I apply the
1.7 factor then the Word docx I wanted was going to be 109MB and therefore
over the 100MB limit.
I didn't know that converting pdf to word would increase the MB like that.
Why, I don't know so thanks for your help I've learnt something new.
Cheers
            Garth
In a message dated 07/10/2013 04:42:36 GMT Daylight Time,
[email protected] writes:
Re: Help needed using adobe exportpdf
created by StacySison (http://forums.adobe.com/people/StacySison) in
Adobe ExportPDF - View the full discussion
(http://forums.adobe.com/message/5740689#5740689)

Similar Messages

Having trouble using ExportPDf message file failed to be converted using Adobe ExportPDF online

need help
file failed to be converted using Adobe ExportPDF online

Hi PeterChick,
Does it occur with all files or a specific file?
Are you trying to convert from within Reader or from Browser?
If from Reader then make sure you are signed in within Reader, also try updating Reader to the latest v11.0.09 and check.
If from Browser then have you checked with a different browser if possible?
Regards,
Florence

"file failed to be converted using Adobe ExportPDF online"

I have been getting errors for about a week when trying to convert a PDF to a word document. In Acrobat I get the error "File failed to be converted using Adobe ExportPDF Online" and when online using ExportPDF I get a conversion failure.
Please help.

Hi PeterChick,
Does it occur with all files or a specific file?
Are you trying to convert from within Reader or from Browser?
If from Reader then make sure you are signed in within Reader, also try updating Reader to the latest v11.0.09 and check.
If from Browser then have you checked with a different browser if possible?
Regards,
Florence

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help...............

Batch Excel conversion using Adobe ExportPDF

As of Subject!
Is it possible and massively convert a batch of PDF files (i.e., a whole folder) in Excel using Adobe ExportPDF online?
If not, is it possible coupling with Adobe Acrobat Pro batch conversion?

More on this?
Do I need Acrobat Pro, or is it sufficient Acrobat Standard?
Allow me an OT: from which version can I active the "Upgrade" option?

How do I speed up the conversion of a PDF to Word using Adobe ExportPDF?

How do I speed up the conversion of a PDF to Word using Adobe ExportPDF?

Believe me, we ALL know what you are going through!
You CAN develop your slideshow directly in iDVD and you can have multiple songs (I just figured this out myself just now! LOL). I will walk you through the process.
Firstly, open a new project in iDVD.
Then press the + button (bottom left hand side) and add slideshow and a heading "My Slideshow" will show up on your iDVD screen. Then, go into your media and press photos, and drop your folder of photos into the "My Slideshow" button (if you havent put your folders into a new album in iPhoto, now is the time to do this).
Now double click on your My Slideshow button and all your photo's should come up. Down the bottom of this page you will see some options. Slide Duration, Transition etc. Again, go into your media and select audio. Go through your playlist and hold down the apple button (next to space bar left hand side) and select the songs you want to play with your slides then drag them across to the audio button (it automatically changes the slideshow to fit to audio). The only problem I can see with this is that there is considerable "dead" time between tracks which means some slides show without music. You can easily solve this by going into Garage Band and trim off the excess "dead" time at the end of each track. If you have problems with this I can talk you through that too if you would like.
Oh and I think i read somewhere that 99 photos is the maximum you can have in iPhoto?? That could be what is causing your problem. You could always break it down in to 2 separate slide shows?

Difficulty converting file keeps coming up with "file failed to be converted using Adobe ExportPDF online

Can't convert file keeps coming up with message "file failed to be converted using Adobe ExportPDF online.

Hi Dude291,
I'm sorry that you're having trouble with ExportPDF. Can you please tell me a bit more about what's going on, so we can get to the bottom of the issue?
What browser are you using? Have you tried clearing the browser cache?
Are you converting from within Reader, or directly via the ExportPDF website?
Are you able to convert other files? Or is the error specific to this one file?
How large or complex is the file that you're trying to convert?
Are you accessing ExportPDF from a networked computer that may have firewall/proxy settings that are limiting access to the Internet?
I think that's good for starters. Please get back to us with some detail about the problem and we will see what we can do.
Best,
Sara

Is is possible to convert Chinese to English using Adobe ExportPDF?

I would like to convert Chinese documents in our company to English using Adobe ExportPDF. Is this possible?

HI Sheryl,
ExportPDF is not a translation service. What you're asking to do is not possible with ExportPDF.
-David

Can I use Adobe ExportPDF to split a PDF document?

Can I use Adobe ExportPDF to split a PDF document?

Hi
We don't have this functionality but I will forward your request to our product team
You might want to try Acrobat XI, trial is available at http://www.adobe.com/cfusion/tdrc/index.cfm?product=acrobat_pro&loc=us
Thanks
-sarabjit

Converting to Word using Adobe ExportPDF

I have recently installed Adobe ExportPDF and used it to convert some files to Word. I find now that when I receive a PDF file it opens a Word dialog box headed File Conversion - Select the encoding that makes your document readable. All the options result in hieroglyphics! All I want to do is to be able to receive PDF files and open them as PDF files. I only need to convert PDF files to Word or Excel very occasionally. Can you help please.

Sounds like your file associations got messed up. Could you try this:
Right-click a PDF file and choose 'Open with...'
Select Adobe Reader from the list of available or recommended programs
Check the box that says 'Always use this program to open this file type'
Click 'Ok'
Let us know if you continue to have trouble.
-David

Trade show magic interactive help needed with adobe connect 8

Please see my website http://www.magicduncan.co.uk - I am a trade show magician as per my website and was wondering if this can be incorporated into my site to create a webinar presentation? Can I do screen sharing using adobe connect 8 as this is one of the things I am exploring for a live trade show magic show based around technology.
Can anyone recommend any indepth tutorials regarding how to tame this mammoth but amazing new tool from adobe?!
Many thanks for your help in advance.

Moved to InDesign forum.
When you export you will note that you export an Adobe PDF. There's a reason for that.
Mac Preview is fine for a plain vanilla PDF but it ends there.
Bob

Help Needed with Adobe Interactive Forms scripts

Hi Gurus,
I have an Interactive form in which I have 5 radio buttons. Upon selecting any one of the radio buttons, some values (Ex : If user selects the first radi button 20 should be displayed in the text box. If he selects the second 21 should be displayed in the textbox.). In my script, I need to capture the checked value of the radio buttons ( They are grouped) and how I should reference radio button on the form/subform
Regards,
Srini

Where to start with scripting:
http://www.adobe.com/devnet/livecycle/articles/lc_designer_scripting_basics/lc_designer_scripting_basics.pdf
http://help.adobe.com/en_US/livecycle/es/FormCalc.pdf
In first doc, check the last chapter for the most illustrative examples.
You need to be able to get the value of the radio (var help = this.rawValue), use the condition (if (){} else {} )and set the value (this.rawValue = "").
Otto

Help--I used Adobe cleaner on my Mac before trying to uninstall it.

Now there doesn't seem to be an option to uninstall. The Adobe Installer folder has an installer option, but no "uninstall" option. When I click on the install option that is there, it says I can't open it because it's an alias. How do I completely remove CS6 from my Mac?? I need to do it so that I can start using CS6 on a different computer.

Unfortunately, this IS the second machine. I want to uninstall the second machine, and install it on a third machine.
But the problem is solved: I had to chat with an Adobe agent, who reset it for me, and walked me through what to do and now it's working fine. Thanks for the help.

Help needed for Adobe photoshop elements 3.0

My problem has been bothing me for a few years now, but because i was able to still use windows 2000 until a few weeks ago, it never occured to me to find a solution for this.
My problem is Adobe photoshop 3.0 in general.
After vista, and now windows 7, i have not been able to properly display my art program, and being that i draw... a lot... with a tablet, and not having it work on me, drives me mad.
i can open the program just fine, the problem occures when i try to draw with my tablet or even the normal mouse.
These are my problems, given to you in a screenie.
http://i121.photobucket.com/albums/o236/flated/ughxx2.png
http://i121.photobucket.com/albums/o236/flated/Ughxx1.png
I've tried the update for this version on this site, but seconds after it starts installing the program shuts down saying I can't download it.
I've also tried for a few days now to find a solution to this but was never able to.
Any help would be greatly appreciated and i would seriously love you x.x

You can't download the patch because it only works with version Elements 5. The patch updates Elements 5 to make it Vista compatible. Sadly, Adobe didn't provide patches for the older versions just the one that was current when Vista came out.
The phantom grid is one of the compatibility issues that some with Elements 4 and under have with Vista.
Just so you know you aren't the only person who's see that display issue. Here's a thread over on Elements Village with a screen capture of phantom grid by another user...
http://www.elementsvillage.com/forums/showthread.php?t=23852
Things that might help...
If you haven't already, set up PSE 3 up to run in Windows XP service pack 2 compatibility mode.
Check and make sure your video card's driver is up to date.

Help needed from Adobe for unauthorised activity on my account

Help please!
I bought some education software from an Adobe supplier on the recommendation of my school. It turns out (without me knowing or being told when I placed the order) that I was being sold old software, at what he now claims was cost price (interesting as I subsequently bought the next version for just $30 more). I have not been able to register that software as it was the wrong version for my region, and after a month of trying I asked for a refund.
He is now accessing my account, (probably from a link in an email i sent him!!) and is trying to get the software he sold me registered so he doesn't have to refund me!
Okay, so bad enough that I have hassles with this "person" but worse that he has access to my account and I seem unable to change this.
This whole process has been a nightmare!! I need to close two open cases immediately but can't get hold of Adobe by phone or on chat!!! Help please!

You should be able to contact chat support from http://adobe.ly/yxj0t6

Help needed using adobe exportpdf

Similar Messages

Maybe you are looking for