Help Needed w/Desktop Manager 4.6 & Outlook Calendar Synch

Everything was working just fine prior to my holiday break. Came back this morning and attempted to synch my BBCurve (running 4.5.0.81) with my Desktop Manager (v4.6) and it is just skipping over the calendar sync portion. No error message. Everything else is synching just fine. Deleted and reinstalled Desktop software -- that didn't work. Disabled calendar sync and re-enabled -- that didn't work. cleared the BB Calendar of all entries and now have no calendar entries on the device. HELP!

I deleted the Intellisync folder, and reset the Desktop Manager configuration settings and I received the following Intellisync error message:
The operation terminated unexpectedly while reading from Microsoft Outlook Calendar
Then I tried to sync just from Outlook Calendar to Device -- that failed
Then I tried to sync just from Device to Outlook Calendar -- that failed as well
Then I deleted Intellisync folder again and rebooted my computer
Successfully synced from Device to Outlook
Tried to sync from Outlook to Device and it appears to be running, says one moment please and nothing happens and it returns to the Desktop Manager with no error message. Grrrrr.....

Similar Messages

  • Desktop manager wants to delete calendar appointments in both bb and outlook.

     I have had my bb 8330 since last August.  I have had to delete and reinstall desktop manager multiple times due to various problems.  Recently I sync'd and lost appointments in both the bb and in outlook.  DM will not allow me to override the flagging to delete.  I deleted DM and reinstalled the newest version with media, attempted to resync and it still wants to delete.  Currently I have 40+ appointments in the bb that are not in outlook (they had been at some point).  I also have appointments in Outlook that the sync wants to delete from the bb.  On top of this, I have lost contacts I didn't realize until I tried to use them (appear to have been deleted by the bb from my outlook).
    The "Details to confirm calendar edits" window box in desktop manager allows clicking to view the entry but does not allow me to override the status of either delete or add so I cannot change the deletions to additions, etc.
    I looked in the options in DM to see if there was a place where I could change a setting which would allow me to override the status but couldn't find anything.
    Does anyone know how to fix this? Otherwise I think the only way to fix it is to write down all of my appointments in both the bb and outlook, attempt a sync and re-enter all the appointments again.  Time consuming!!  And if I need to do that I may as well go back to a hardcopy calendar.
    A friend suggested that if there is too much data in the bb that it will only keep the newest entries and maybe that is why I have lost some data.
    So, along those lines can someone tell me how to do a mass delete of e-mails on the bb directly?  I know how to delete one e-mail but cannot figure out how to flag more than one.
    Thanks!  motomom3

    on the device if you open messages, highlight the newest one you want to delete, click menu button, and click delete prior, this will delete eveything older than it.
    if you plug into DTM, goto backup/restore - advanced... you can completely clear the messages database
    what DTM and device sofwtare do you have?
    DTM- help-about
    device- options- about, 3rd line down, v4.x.x.x
    you can go to c:\documents and settings\(your username)\research in motion\blackberry\   and delete the intellisync folder
    then go in and setup sync settings again

  • Help!! Desktop Manager exe: Applicatio​n error

    I've tried a clean uninstall and reinstall the Blackberry Desktop Software version 5.0 and keep getting this message  Desktop Mgr exe: Application error - Instruction at "0x004e6535" referenced memory at "0x04480013". The memory could not be read.
    anyone has any ideas on how to resolve this? would appreciate the help!
    thanks
    Solved!
    Go to Solution.

    Hi and Welcome to the Forums!
    Yikes...some have reported the need to go deeper into the Registry than is instructed in the Clean uninstall KB. Some have used a registry cleanser in order to successfully do what is needed.
    Even though perhaps redundant, I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista/Win7, use the "Run As Administrator" option for everything.
    1) Remove your device OS update package from your PC (add/remove programs)
    2) Cleanly uninstall the RIM DTM software:
    KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
    Some have reported that there are more registry keys to remove than are discussed in that KB
    Others have reported the use of a registry cleansing tool to also be helpful
    3) Get a fresh download of the RIM DTM software:
    https://www.blackberry.com/Downloads/entry.do?code​=A8BAA56554F96369AB93E4F3BB068C22
    Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchronizing via USB):
    KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
    4) Download (to your PC) a fresh copy of your device OS package from your carrier:
    http://na.blackberry.com/eng/support/downloads/dow​nload_sites.jsp
    5) Install DTM to your PC
    6) Install (also to your PC), the device OS package
    7) Start the organizer configuration over:
    KB17022 How to configure organizer applications for synchronization using BlackBerry Desktop Manager
    Hopefully that will get things going again.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Error Synchronizing Calendar using Desktop Manager 4.7, Outlook 2003, on the Storm

    I just installed Desktop Manager on my PC (Windows XP).
    Contacts sync fine.
    Calendar does not sync:
    "Reading Device Calendar" goes fine.
    "Processing Device Calendar" goes fine.
    "Reading from MS Outlook Calendar" is where the error happens:
    Desktop Manager begins reading the 988 Outlook items and consistently stops at item #227, with one of two error messages:
    1) "Intellisync, Unknown Error Reported" or
    2) "Operation Terminated Unexpectedly."
    I followed directions for:
    How to turn on advanced logging for Intellisync due to BlackBerry smartphone synchronization failureat
    http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB01451&slic...
    This operation required that I modify the iloptcfg.cfg file.
    Still no luck. any suggestions?
    Solved!
    Go to Solution.

    there is a method involving enabling detailed logs on the Desktop Manager. Then it will give information about that 227th item. check the forum or th public knowledge base (click on the "SUPPORT" button on top of the present page)
    if I were you, I'd just wipe the calendar database on the device, do the sync, and when it stops : open the calendar on the device and see the last event synchronized. it should be the 226th.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Help needed with Media Manager

    I recently purchased the Blackberry Curve, 8310 and downloaded the most updated version of Media Manager.  While connected to my PC with the USB cable, the desktop manager fires up, updates my email accounts, etc. and seems to be able to communicate with the Blackberry.  However, when I then open up Media Manager to transfer photos, it does not recognize the phone connection.  Any help in defining what I'm missing here would be appreciated.

    If you have a media card in your BlackBerry then the easier way to transfer items to it is to just click on the My Computer icon and drag and drop them to the appropriate folder. Music to the \blackberry\music folder and so on. As for the problem with the Media manager, it should be remedied by installing the OS for your device to your computer.
    Message Edited by tschweitzer on 10-21-2008 11:21 AM
    Message Edited by tschweitzer on 10-21-2008 11:22 AM

  • Desktop Manager 5.0 closes when synching Calendar with Lotus Notes 8

    I'm running Windows XP, just installed Desktop Manager v5.0 and upgraded to Lotus Notes 8 and trying to synch to a BB Storm.  I continually get an error if I try to do a two way synch with my calendar only.  If I do a 1 way Synch to my Device with or without Replacing all data in target application there is no problem.  Once I change the synch to 2 way synch the synching with the calendar starts then immediately closes and displays the following errors: Blackberry 5 errors.  I've also synched with a Vista Machine and using Outlook calendar without any problem with the same BB.

    I decided to open a real problem, so I went to Support.Apple.com and within a few short clicks, Apple called me.
    I accidentally hung up on them, and they called back in 2 minutes.
    I then waited in the queue for a few short minutes.  The person who answered, understood my problem and transferred me to the iCal department where I waited another 15 minutes. 
    The iCal department then did some research for 10 minutes, and came back to tell me that, unfortunately, iCal is working / not broken.  I disagreed, saying that this is my business computer and not being able to send meeting invites to anyone not using a MAC is insane.     
    The support guy suggested I tell the developers directly, via http://www.apple.com/feedback/ical.html.
    I did. 
    He suggested that you all do to.  The more people who feedback, the faster we'll get a fix!

  • Desktop Manager for Mac and Calendars

    Hi there,
    I installed this software on 10.6.1 and updated my software version on my Curve 8330 as well.  No problems there.  I like to use GMail on my BB and see that I now have three calendars showing up.  One is my phone provider, then my Mac account and also, after installing the Enhanced GMail application on the BB, I now have a GMail calendar.  There are no entries in this calendar and I'd like to know if it's possible to sync this calendar with the Desktop Manager software as well as syncing my Mac calendar to my desktop.  I know that you cannot install the Google Sync software on the BB when you already have another sync package installed, so I'm wondering how and if it is possible to also sync the Google data to the BB.
    Comments and suggestions would be much appreciated.
    Lynn 

    DM does not support BT.
    4.6.1.305 hybrid
    Mac Pro 2X2.8 Quad SL

  • "operation terminated unexpectedly" during Outlook calendar synch

    Help!  Everything was synchronizing fine but then one day, just stopped working.  I rec'd an error message from "Intellisync" stating "The operation terminated unexpectedly".  I've tried to uninstall the DM software & reinstall several times but that doesn't help.  I tried to synch only from the device to Outlook & it worked once but the second time I rec'd the same error on record 194 of 398.
    PC Operating System = Windows XP Pro
    Desktop version  4.6.0.12 (May 22 '08)
    MS Outlook version 2007
    Model phone = Blackberry Pearl 8130
    I need some help!
    Solved!
    Go to Solution.

    In my desparation to keeping trying different avenues, I tried uninstalling the DM again but reinstalled version 4.3.0.15 (Aug 15 '07) instead of the more recent versions (had previously tried both 4.5 and 4.6 with the same errors messages received). 
    My first attempt to synch my Outlook Calendar with v.4.3 didn't work either but for some reason, it does work now.  Go figure?  I'm just going to cross my fingers & hope this older version will continue to work.

  • Outlook calendar synching issues with iPhone

    My work Outlook calendar does not seem to be synching up with the calendar on my iPhone. Any ideas on how to resolve this?

    In that case the sync is with Exchange, not with Outlook. Both Outlook and the iPhone sync with Exchange, which is the master copy.
    Which is more current, Outlook or the iPhone?

  • Help needed on activity management

    Hi,
    I have created an activity in WEBUI for myself and when i try to verify the same in INBOX, the task is not available. I am new to this. can some one tell me what config changes are needed at the backend.
    Thanks in advance.
    Regards,
    Udaya

    Hi Uday,
    If you require your activity to be displayed in your inbox, then you need to do Grooupware Integration.
    Groupware Integration is used to integrate CRM Activity Management with the groupware applications, that is Microsoft Outlook and Lotus Notes, allowing you to synchronize business activities and tasks in your CRM calendar and your own groupware calendar.
    To map the CRM statuses to groupware statuses, you Customize for CRM by choosing Customer Relationship Management -> Transactions -> Settings for Activities -> Mapping of Activities to Groupware -> Map Activity Status to Groupware.
    For more information on this go throught the following link
    [http://help.sap.com/saphelp_crm60/helpdata/en/5c/e90d3888a11c10e10000009b38f8cf/frameset.htm]
    Wish this was useful to you
    regards
    Srikantan

  • Help needed regarding CLLocation Manager

    Hello everybody,
    i am developing a GPS application in which i needs to track the speed of the device/iphone ,i am using the CLCorelocation API's Locate me referral code provided by Apple my problem is that the LocationManager does not updates the current latitude and longitudes thus i am unable to calculate the distance as well as the speed of the device/iphone.
    Any kinds of suggestions/code will be highly appreciated please suggest me if i can do something with the Mapkit framework introduced in the sdk 3.0.
    thanks in advance

    Thanks for your reply i am copying my code what i have implemented and it does not works please have a look at it and let me know what i am doing wrong i will be very helpful to you.
    - (void)locationManager:(CLLocationManager *)manager
    didUpdateToLocation:(CLLocation *)newLocation
    fromLocation:(CLLocation *)oldLocation
    ASafeDriverAppDelegate *appDel1 = (ASafeDriverAppDelegate *)[[UIApplication sharedApplication] delegate];
    chklat = newLocation.coordinate.latitude;
    chklon = newLocation.coordinate.longitude;
    appDel1.maxSpeed=0;
    double timeDiff;
    NSMutableString *update = [[[NSMutableString alloc] init]autorelease];
    // Horizontal coordinates
    if (signbit(newLocation.horizontalAccuracy)) {
    // Negative accuracy means an invalid or unavailable measurement
    [update appendString:LocStr(@"LatLongUnavailable")];
    } else {
    // CoreLocation returns positive for North & East, negative for South & West
    [update appendFormat:LocStr(@"LatLongFormat"), // This format takes 4 args: 2 pairs of the form coordinate + compass direction
    fabs(newLocation.coordinate.latitude), signbit(newLocation.coordinate.latitude) ? LocStr(@"South") : LocStr(@"North"),
    fabs(newLocation.coordinate.longitude),signbit(newLocation.coordinate.longitude ) ? LocStr(@"West") : LocStr(@"East")];
    [update appendString:@"\n"];
    [update appendFormat:LocStr(@"MeterAccuracyFormat"), newLocation.horizontalAccuracy];
    mShouldStopAndStartLocationServiceAgain = YES;
    [update appendString:@"\n\n"];
    // Altitude
    if (signbit(newLocation.verticalAccuracy)) {
    // Negative accuracy means an invalid or unavailable measurement
    [update appendString:LocStr(@"AltUnavailable")];
    } else {
    // Positive and negative in altitude denote above & below sea level, respectively
    [update appendFormat:LocStr(@"AltitudeFormat"), fabs(newLocation.altitude), (signbit(newLocation.altitude)) ? LocStr(@"BelowSeaLevel") : LocStr(@"AboveSeaLevel")];
    [update appendString:@"\n"];
    [update appendFormat:LocStr(@"MeterAccuracyFormat"), newLocation.verticalAccuracy];
    [update appendString:@"\n\n"];
    //geocoding implementation here........................................................................... .........................................
    NSString *ServerUrl=@"http://maps.google.com/maps/geo?";
    NSString *restUrl=@"output=csv&oe=utf8&sensor=false&key=ABQIAAAA9nyRoYg0rWpsiVi9iMjoSRQV WFT_Rez40XtsgfvlPpZQQeDyexSS5IUWt7S7bu53pG1lR3fjgcrfxQ";
    NSString * URLdata=[NSString stringWithFormat:@"%@q=%f,%f&%@",ServerUrl,newLocation.coordinate.latitude,newL ocation.coordinate.longitude,restUrl];
    NSURL *theURL = [NSURL URLWithString:URLdata];
    NSURLRequest *myURLRequest = [NSURLRequest requestWithURL: theURL];
    NSURLResponse* myURLResponse;
    NSError* myError;
    NSData* myDataResult = [NSURLConnection sendSynchronousRequest: myURLRequest returningResponse:&myURLResponse error:& myError];
    NSString* StreetName;
    BOOL val=YES;
    StreetName = [[NSString alloc] initWithData:myDataResult encoding:NSASCIIStringEncoding];
    //NSLog(@"this is the lenght of the street name %d",[StreetName length]);
    if([StreetName length]!=0)
    NSLog(@"this is the street name received.............. %@",StreetName);//[StreetName substringFromIndex:6]);
    //NSMutableArray *street=[[StreetName substringFromIndex:6] componentsSeparatedByString:@","];
    NSMutableArray street=(NSMutableArray*)(NSMutableArray)[StreetName componentsSeparatedByString:@","];
    NSString *tempString=[street objectAtIndex:2];
    appDel1.currentLocation=[tempString substringFromIndex:1];
    NSRange range=[tempString rangeOfString:@" "];
    if(range.location==NSNotFound)
    val=NO;
    //NSLog(@"this is the value of bool in false %d",val);
    else
    val=YES;
    //NSLog(@"this is the vale of bool in true %d",val);
    NSString *finalStreet;
    NSString *temp2;
    temp3=@" ";
    if(!val)
    finalStreet=[tempString substringFromIndex:1];
    NSLog(@"this is the street name %@",finalStreet);
    else
    NSMutableArray temp1=(NSMutableArray)[tempString componentsSeparatedByString:@" "];
    for(int i=1;i<[temp1 count];i++)
    temp2=[temp1 objectAtIndex:i];
    temp3=[[temp3 stringByAppendingString:@" "] stringByAppendingString:temp2];
    finalStreet=[temp3 substringFromIndex:0];
    NSMutableArray *speedValues=[appDel1 getSpeedValue:[finalStreet stringByTrimmingCharactersInSet:[NSCharacterSet whitespaceAndNewlineCharacterSet]]];
    if([speedValues count]>0)
    if(appDel1.moreThanOneSpeed==YES)
    appDel1.maxSpeed=[appDel1 getSpeed:[finalStreet substringFromIndex:0] first:newLocation.coordinate.latitude second:newLocation.coordinate.longitude];
    else
    appDel1.maxSpeed=[[speedValues objectAtIndex:0]intValue];
    //Calculate speed
    CLLocationDistance distance;
    double calSpeed;
    NSTimeInterval difference;
    //calculate distance and time elapsed only if we save old location
    if(oldLocation != nil)
    difference= [[newLocation timestamp] timeIntervalSinceDate:[oldLocation timestamp]];
    distance = [newLocation getDistanceFrom:oldLocation];
    else{
    distance = 0.0;
    calSpeed =(distance/difference)*2.23693629;
    NSLog(@"Time elapsed is: %f", difference);
    NSLog(@"Distance travelled is: %f", distance);
    NSLog(@"Speed is: %f", calSpeed);
    //save the latest newLocation for calculating the speed
    oldLocation = [newLocation retain];
    appDel1.distance=distance;
    appDel1.time=timeDiff;
    [self.delegate displaySpeed:oldLocation.coordinate.latitude second:oldLocation.coordinate.longitude third:newLocation.coordinate.latitude fourth:newLocation.coordinate.longitude];
    if(appDel1.speed!=calSpeed)
    appDel1.speed=calSpeed;
    [appDel1 checkLimitAndSpeed];
    the speed and distance returned is always zero as the latitude and longitude remains the same always it does not keep updating.
    Thanks

  • Synchronization with desktop manager - bb and outlook

    after having downloaded a windows vista update, I don't manage synchronization anymore.
    here follows the problem description I get:
    help!
    Timestamp modulo con errori: 4797fb36 Offset eccezione: 0008e56b Codice eccezione: c000000d Dati eccezione: 00000000 Versione SO: 6.0.6  Timestamp modulo con errori: 4797fb36
      Offset eccezione: 0008e56b
      Codice eccezione: c000000d
      Dati eccezione: 00000000
      Versione SO: 6.0.6001.2.1.0.768.3
      ID impostazioni locali: 1040
      Informazioni aggiuntive 1: 8339
      Ulteriori informazioni 2: 9669671cdb1174b4ca37f14c3c33daa1
      Ulteriori informazioni 3: 3397
      Ulteriori informazioni 4: 76a73f1efcf99f20dde8e2dac5a2e367
    001.2.1.0.768.3 ID impostazioni locali: 1040 Informazioni aggiuntive 1: 8339 Ulteriori informazioni 2: 9669671cdb1174b4ca37f14c3c33daa1 Ulteriori informazioni 3: 3397 Ulteriori informazioni 4: 76a73f1efcf99f20dde8e2dac5a2e367
    Solved!
    Go to Solution.

    here they are:
    969604
    969897
    969898
    970238
    890830
    969559
    905866
    955428
    969613
    961501
    969682
    969679
    968537
    967632
    it'd be great if you could suggest which could be the 'disturbing' ones, that way I would delete only those.
    thanx

  • Emergency help needed re media manager

    Hi all,
    Hopefully somebody can help me with this.
    I am due to start an audio mix on a project for a client tomorrow. He currently has the FCP project on his Mac Pro but due to recording to a tascam portable recorder on set all his audio files are called audio1, audio2 etc. He has a folders on his drive with each days recordings so there are many folders which all contain files called audio1 etc.
    I asked him to put his picture lock sequence onto an external drive using media manager but it doesn't seem to able to handle the audio files since there are so many with the same name from different folders so the external now has only one file with each name where on the picture lock sequence there are many audio clips called audio1 for example.
    I hope this makes sense.
    Please post here if you can help me.
    Thanks in advance
    Michael

    If you have a media card in your BlackBerry then the easier way to transfer items to it is to just click on the My Computer icon and drag and drop them to the appropriate folder. Music to the \blackberry\music folder and so on. As for the problem with the Media manager, it should be remedied by installing the OS for your device to your computer.
    Message Edited by tschweitzer on 10-21-2008 11:21 AM
    Message Edited by tschweitzer on 10-21-2008 11:22 AM

  • [Solved] Help, need a theme manager....

    I am currently using Awesome. When I start Vlc it uses some sort of square / grayish theme that is pretty ugly to be honest...
    Also I use drracket and it has the same theme...
    I also remember reading sth about qt3 / qt4 themes (I think KDE uses them), but have no Idea how to manage these...
    So finally my question :
    Is there any theme manager (preferably sth simple & light weight) that I can install that sets these qt3/qt4 themes ?
    I would really like to get rid of the gray boxy look....
    thanks in advance
    Last edited by fizk-jnk (2011-02-16 15:25:52)

    Lolz!
    Thanks for the help
    I usually do try to search the wiki... dunno why I seemed to forget & started digging in google

  • HELP needed on Remote Management set to allow access for all users

    my mac mini snow leopard server runs in a data center and i use screen sharing to interact with it. i played with the sharing settings remotely yesterday and changed "allow access for" to all users. i was disconnected immediately and i couldn't logon again. i have no luck changing to other users. i don't want to make a special trip to the center to change it back to whatever it used to be. i can still use afp to connect but the screen sharing option is no longer available. what does "allow access for all users" mean anyway?
    thanks!

    As its name implies, allow access for all should allow any valid user account to access the server. I'm not sure why it's no longer working. It almost sounds like the ARDAgent crashed.
    Either way there's a command-line interface to the ARD preferences:
    /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/ki ckstart
    man kickstart discusses the options, including examples of how to enable access for specific users.

Maybe you are looking for