Help Needed w.r.t BW-HR "implementation Docs" & "Roles&Responsibilities"
Hi Guys
Can someone provide me some "Roles and Responsibilities" during SAP BW-HR Implementation as I need for an upcoming project.
I am also looking for some step by step approach for extracting HR data into BW.
Please send any related documents to my mail id [email protected]
Please send any links which have downloadable PDFs to start this implementation from Scratch.
Points will be awraded.
Regards,
rik
I am modifying the correct httpd.conf file on the server, it just doesn't seem to work. - If I put the rewrite rules in the <Directory /> the rewrite works but it adds /Library/WebServer/Documents to the URL.
I also tried putting the rewrite rules in <IfModule mod_rewrite.c> but that did not work either.
mod_rewrite is enabled and running on the server.
I will post the rewrite rules again in the code brackets. Sorry for the long post. - If some one can try them out on their Leopard Server to see if they can get them to work, it would be much appreciated. Again, these work on my Leopard Client but I can't get them to work on Server.
-- The httpd.conf file posted above is just the default conf file found in /private/etc/apache2/
<code>
RewriteEngine On
Options +FollowSymLinks
RewriteRule ^(.+)/$ http://%{HTTP_HOST}$1 [R=301, L]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.php(.*)\ HTTP
RewriteRule (.+)\.php(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.asp(.*)\ HTTP
RewriteRule (.+)\.asp(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.aspx(.*)\ HTTP
RewriteRule (.+)\.aspx(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.htm.(.)\ HTTP
RewriteRule (.+)\.htm.(.)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.cfm(.*)\ HTTP
RewriteRule (.+)\.cfm(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.bak(.*)\ HTTP
RewriteRule (.+)\.bak(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.inc(.*)\ HTTP
RewriteRule (.+)\.inc(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\..(.)\ HTTP
RewriteRule (.+)\..(.)$ $1$2 [R, L]]
<code>
Similar Messages
-
Implementation R12 Roles-responsibilities mapping document
Oracle Apps R12 Roles-Responsibility matrix
Hi Gurus,
For a fresh implementation project first we need to plan the responsibilities and roles and corresponding menus to be setup in Oracle Apps R12.
Can anyone guide where can I get such a document (Ex: an Excel file) where responsibilities, menus are nicely mapped and ready to be setup.
Normally this kind of document is required during implementation planning/initiation stage.
I need this atleast for Finance module, will be great if I get for other modules too.
Thanks,
SayanYou can easily create such a document by extracting the information from the backend tables correspomding to the Responsibility form.
Take your DBA's help if you are not very conversant with SQL.
There no such standard document.
Thanks -
Help needed for file processing using FTP
Hi All,
I am new to ODI tool and currently we are implementing one project in ODI. Could you please, any one help me on the following requirement... how to implement it?
Scenario:
i) I need to pick a file from remote host 'outbox' dir using FTP process, and place into local 'temp' dir. (I can do it with odiFTPGet tool)
ii) Change the file as per target business requirement.??? ( this step challenging me)
for ex:
if source file name : <project name>_<source ID>_<transaction name>_<unique id>.txt
target name should be : 1234_<transaction name>_<sysdate in yyyyMMddhhmmss>_<unique id>_2345.txt ( here 1234 and 2345 are hard coded values)
iii) Later move to local 'temp' to local 'outbox' dir. ( I can do it with odiFileMove tool)
iv) After successful process move the file from remote 'outbox' to remote 'archive' dir ??? (again this is challenging me).
For this my questions are:
1) How to get file name into a variable ( In one of the post , it says we need to create data model and data stores, and interface to get the file names into a file. apart from is there any easy way i can implement it in package it self?)
2) How to tokenize a long string ( i.e., need to tokenize the source file to get <unique id> and <transaction name> and map to target file name)
3) How to define implementation for Java in user function?? do we need to use class declarations and import statements?? I need a sample user function in Java.
4) How to move/rename a file in remote server?? ( need to move file from remote 'outbox' server to remote archive' dir)
5) If any step in package fails, How to get the error msg into a variable which i can use for sending mail and raise a ticket in remedy?? ( I will pass that variable to as content to mail and remedy ticket)
6) How to handle list type data (string list) by variables in ODI?? (As we can define single variable not as list.)
I am sorry to ask all my queries I a single post. But I need to solutions for all to implement this in my project.
Thanks in advance. Appreciate early response.
Regards,
Kiran.NCan any one share your thoughts for my request.
Thanks in advance.
Regards,
Kiran -
Help needed:Printing HTML file using javax.print
Hi
I am using the following code which i got form the forum for rpinting an HTML file.
The folllowing code is working fine, but the problem is the content of HTML file is not getting printed. I am geeting a blank page with no content. What is the change that is required in the code? ALso is there any simpler way to implement this. Help needed ASAP.
public boolean printHTMLFile(String filename) {
try {
JEditorPane editorPane = new JEditorPane();
editorPane.setEditorKit(new HTMLEditorKit());
//editorPane.setContentType("text/html");
editorPane.setSize(500,500);
String text = getFileContents(filename);
if (text != null) {
editorPane.setText(text);
} else {
return false;
printEditorPane(editorPane);
return true;
} catch (Exception tce) {
tce.printStackTrace();
return false;
public String getFileContents(String filename) {
try {
File file = new File(filename);
BufferedReader br = new BufferedReader(new FileReader(file));
String line;
StringBuffer sb = new StringBuffer();
while ((line = br.readLine()) != null) {
sb.append(line);
br.close();
return sb.toString();
} catch (Exception tce) {
tce.printStackTrace();
return null;
public void printEditorPane(JEditorPane editorPane) {
try {
HTMLPrinter htmlPrinter = new HTMLPrinter();
htmlPrinter.printJEditorPane(editorPane, htmlPrinter.showPrintDialog());
} catch (Exception tce) {
tce.printStackTrace();
* Sets up to easily print HTML documents. It is not necessary to call any of the setter
* methods as they all have default values, they are provided should you wish to change
* any of the default values.
public class HTMLPrinter {
public int DEFAULT_DPI = 72;
public float DEFAULT_PAGE_WIDTH_INCH = 8.5f;
public float DEFAULT_PAGE_HEIGHT_INCH = 11f;
int x = 100;
int y = 80;
GraphicsConfiguration gc;
PrintService[] services;
PrintService defaultService;
DocFlavor flavor;
PrintRequestAttributeSet attributes;
Vector pjlListeners = new Vector();
Vector pjalListeners = new Vector();
Vector psalListeners = new Vector();
public HTMLPrinter() {
gc = null;
attributes = new HashPrintRequestAttributeSet();
flavor = null;
defaultService = PrintServiceLookup.lookupDefaultPrintService();
services = PrintServiceLookup.lookupPrintServices(flavor, attributes);
// do something with the supported docflavors
DocFlavor[] df = defaultService.getSupportedDocFlavors();
for (int i = 0; i < df.length; i++)
System.out.println(df.getMimeType() + " " + df[i].getRepresentationClassName());
// if there is a default service, but no other services
if (defaultService != null && (services == null || services.length == 0)) {
services = new PrintService[1];
services[0] = defaultService;
* Set the GraphicsConfiguration to display the print dialog on.
* @param gc a GraphicsConfiguration object
public void setGraphicsConfiguration(GraphicsConfiguration gc) {
this.gc = gc;
public void setServices(PrintService[] services) {
this.services = services;
public void setDefaultService(PrintService service) {
this.defaultService = service;
public void setDocFlavor(DocFlavor flavor) {
this.flavor = flavor;
public void setPrintRequestAttributes(PrintRequestAttributeSet attributes) {
this.attributes = attributes;
public void setPrintDialogLocation(int x, int y) {
this.x = x;
this.y = y;
public void addPrintJobListener(PrintJobListener pjl) {
pjlListeners.addElement(pjl);
public void removePrintJobListener(PrintJobListener pjl) {
pjlListeners.removeElement(pjl);
public void addPrintServiceAttributeListener(PrintServiceAttributeListener psal) {
psalListeners.addElement(psal);
public void removePrintServiceAttributeListener(PrintServiceAttributeListener psal) {
psalListeners.removeElement(psal);
public boolean printJEditorPane(JEditorPane jep, PrintService ps) {
if (ps == null || jep == null) {
System.out.println("printJEditorPane: jep or ps is NULL, aborting...");
return false;
// get the root view of the preview pane
View rv = jep.getUI().getRootView(jep);
// get the size of the view (hopefully the total size of the page to be printed
int x = (int) rv.getPreferredSpan(View.X_AXIS);
int y = (int) rv.getPreferredSpan(View.Y_AXIS);
// find out if the print has been set to colour mode
DocPrintJob dpj = ps.createPrintJob();
PrintJobAttributeSet pjas = dpj.getAttributes();
// get the DPI and printable area of the page. use default values if not available
// use this to get the maximum number of pixels on the vertical axis
PrinterResolution pr = (PrinterResolution) pjas.get(PrinterResolution.class);
int dpi;
float pageX, pageY;
if (pr != null)
dpi = pr.getFeedResolution(PrinterResolution.DPI);
else
dpi = DEFAULT_DPI;
MediaPrintableArea mpa = (MediaPrintableArea) pjas.get(MediaPrintableArea.class);
if (mpa != null) {
pageX = mpa.getX(MediaPrintableArea.INCH);
pageY = mpa.getX(MediaPrintableArea.INCH);
} else {
pageX = DEFAULT_PAGE_WIDTH_INCH;
pageY = DEFAULT_PAGE_HEIGHT_INCH;
int pixelsPerPageY = (int) (dpi * pageY);
int pixelsPerPageX = (int) (dpi * pageX);
int minY = Math.max(pixelsPerPageY, y);
// make colour true if the user has selected colour, and the PrintService can support colour
boolean colour = pjas.containsValue(Chromaticity.COLOR);
colour = colour & (ps.getAttribute(ColorSupported.class) == ColorSupported.SUPPORTED);
// create a BufferedImage to draw on
int imgMode;
if (colour)
imgMode = BufferedImage.TYPE_3BYTE_BGR;
else
imgMode = BufferedImage.TYPE_BYTE_GRAY;
BufferedImage img = new BufferedImage(pixelsPerPageX, minY, imgMode);
Graphics myGraphics = img.getGraphics();
myGraphics.setClip(0, 0, pixelsPerPageX, minY);
myGraphics.setColor(Color.WHITE);
myGraphics.fillRect(0, 0, pixelsPerPageX, minY);
java.awt.Rectangle rectangle=new java.awt.Rectangle(0,0,pixelsPerPageX, minY);
// call rootView.paint( myGraphics, rect ) to paint the whole image on myGraphics
rv.paint(myGraphics, rectangle);
try {
// write the image as a JPEG to the ByteArray so it can be printed
Iterator writers = ImageIO.getImageWritersByFormatName("jpeg");
ImageWriter writer = (ImageWriter) writers.next();
// mod: Added the iwparam to create the highest quality image possible
ImageWriteParam iwparam = writer.getDefaultWriteParam();
iwparam.setCompressionMode(ImageWriteParam.MODE_EXPLICIT) ;
iwparam.setCompressionQuality(1.0f); // highest quality
ByteArrayOutputStream out = new ByteArrayOutputStream();
ImageOutputStream ios = ImageIO.createImageOutputStream(out);
writer.setOutput(ios);
// get the number of pages we need to print this image
int imageHeight = img.getHeight();
int numberOfPages = (int) Math.ceil(minY / (double) pixelsPerPageY);
// print each page
for (int i = 0; i < numberOfPages; i++) {
int startY = i * pixelsPerPageY;
// get a subimage which is exactly the size of one page
BufferedImage subImg = img.getSubimage(0, startY, pixelsPerPageX, Math.min(y - startY, pixelsPerPageY));
// mod: different .write() method to use the iwparam parameter with highest quality compression
writer.write(null, new IIOImage(subImg, null, null), iwparam);
SimpleDoc sd = new SimpleDoc(out.toByteArray(), DocFlavor.BYTE_ARRAY.JPEG, null);
printDocument(sd, ps);
// reset the ByteArray so we can start the next page
out.reset();
} catch (PrintException e) {
System.out.println("Error printing document.");
e.printStackTrace();
return false;
} catch (IOException e) {
System.out.println("Error creating ImageOutputStream or writing to it.");
e.printStackTrace();
return false;
// uncomment this code and comment out the 'try-catch' block above
// to print to a JFrame instead of to the printer
/* JFrame jf = new JFrame();
PaintableJPanel jp = new PaintableJPanel();
jp.setImage( img );
JScrollPane jsp = new JScrollPane( jp );
jf.getContentPane().add( jsp );
Insets i = jf.getInsets();
jf.setBounds( 0, 0, newX, y );
jf.setDefaultCloseOperation( JFrame.DISPOSE_ON_CLOSE );
jf.setVisible( true );*/
return true;
* Print the document to the specified PrintService.
* This method cannot tell if the printing was successful. You must register
* a PrintJobListener
* @return false if no PrintService is selected in the dialog, true otherwise
public boolean printDocument(Doc doc, PrintService ps) throws PrintException {
if (ps == null)
return false;
addAllPrintServiceAttributeListeners(ps);
DocPrintJob dpj = ps.createPrintJob();
addAllPrintJobListeners(dpj);
dpj.print(doc, attributes);
return true;
public PrintService showPrintDialog() {
return ServiceUI.printDialog(gc, x, y, services, defaultService, flavor, attributes);
private void addAllPrintServiceAttributeListeners(PrintService ps) {
// add all listeners that are currently added to this object
for (int i = 0; i < psalListeners.size(); i++) {
PrintServiceAttributeListener p = (PrintServiceAttributeListener) psalListeners.get(i);
ps.addPrintServiceAttributeListener(p);
private void addAllPrintJobListeners(DocPrintJob dpj) {
// add all listeners that are currently added to this object
for (int i = 0; i < pjlListeners.size(); i++) {
PrintJobListener p = (PrintJobListener) pjlListeners.get(i);
dpj.addPrintJobListener(p);
// uncomment this also to print to a JFrame instead of a printer
/* protected class PaintableJPanel extends JPanel {
Image img;
protected PaintableJPanel() {
super();
public void setImage( Image i ) {
img = i;
public void paint( Graphics g ) {
g.drawImage( img, 0, 0, this );
Thanks
RamRam,
I have had printing problems too a year and a half ago. I used all printing apis of java and I still find that it is something java lacks. Now basically you can try autosense. To check whether your printer is capable of printing the docflavor use this PrintServiceLookup.lookupPrintServices(flavor, aset); . If it lists the printer then he can print the document otherwise he can't. I guess that is why you get the error.
Regards,
Kevin -
Need you inputs on IS Retail Implementation
Hi Folks,
I need to work on IS retail implementation project and new to retail industry.
Can anyone send me the documents on on IS Retail and sap help link of that module so that i can understand what are standard cubes,reports are been usen in that.
I am also looking for the configuration document required for the data flow from POS TO BI through POS-DM.
And before starting into this project any other modules to be known. Please gudie me on this.
And if possible add some extra thing i am missing anything.
Points Assured.
Urs,
RK.Hi,
Pls chk this link:
http://help.sap.com/saphelp_nw04/helpdata/en/86/39d6386e24f90ae10000000a114084/frameset.htm
http://help.sap.com/content/documentation/industry/docu_is_retail.htm
http://help.sap.com/content/documentation/industry/docu_is_retail_retail.htm
http://help.sap.com/content/bestpractices/industry/bestp_industry_retail.htm
Revaluation at Retail
http://help.sap.com/saphelp_nw04/helpdata/en/8e/65f438c842cc2be10000000a114084/content.htm
BW SAP Retail
http://help.sap.com/saphelp_nw04/helpdata/en/86/39d6386e24f90ae10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/73/d26594107711d4af1e080009d2232d/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/35/e58282fe8711d3b49f006094b9301e/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/39/e531c93747da4a8806612212b013b4/content.htm
You will get some more info from www.service.sap.com/bi -->>solution detail -->>Industry Portfolios -->> Sap Retail
http://service.sap.com/bi
https://websmp105.sap-ag.de/~sapidb/011000358700002346292001
https://websmp105.sap-ag.de/~sapidb/011000358700001897452001
Hope this helps,
regards
CSM Reddy -
OSS Notes issue.. help needed
Hello,
Regarding OSS Notes:398217, When I open this oss notes, the status is showing "Cannot be implemented', when I try to implement it is showing message "SAP Note does not contain valid correction instructions'. What will be the issue here? Please help me.
Thanks,
ShreekantHi Shreekant,
There could be two reasons:
Reaons 1:
Not all SAP notes involve changes to programs, some notes can also involve make configuration (SPRO) changes which need to be done manually by the system user. Hence if the note is the type, then you cannot implement it, but need to read the note and implement the correction instructions manually.
Reason 2:
The SAP version is higher than the version for which the SAP note is intended.
Now here note 398217 does make changes in a program however it's version is upto 4.6C. You can check program RLMOBINV from SE38 and go to subroutine UPDATE_TO_DATABASE and check whether the chnage indicated by the note has already been implemented. If your SAP version is > 46C then it has and hence SAP wont allow you to implement a obsolete note for this version.
Cheers,
Aditya -
Help needed- Caller tone application using JTAPI and JMF
Hi to All,
I want to make a Caller Tone Application for Cisco IP phone.
For that application I am using JTAPI and JMF.
I am new to this two technologies.
Can somebody help me for how to accomplish this?
---AshishHi Jerry,
You can run analog input and counter tasks concurrently. You can start them using software timing basically at the same time which may be fine for your needs and is the easiest to implement. You also can use a hardware start trigger to start the tasks if you prefer. It all depends on the level of synchronization you need.
You have not mentioned at what rate you will be acquiring data on your analog inputs. The M Series PCI-6225 has 80 analog inputs and may suit your needs. You will need to know what sampling rate you are trying to achieve. Any M Series device will definitely give you the best value.
Hope this helps!
Laura -
Help needed with my application
Hi,
Can you take a few minutes and suggest DAQ hardware for my application? I need to measure a high freq signal from a quadrature encoder and correlate it to my 48 analog inputs. I need to know the speed of my motor when the analog measurements are taken. The signal from the quadrature encoder is a 1.7 MHz squarewave ( I can loose some resolution and slow it down ). I was planning on using PCI-6071E but I am not sure if it is suitable any more.
Thanks a lot
Jerry.Hi Jerry,
You can run analog input and counter tasks concurrently. You can start them using software timing basically at the same time which may be fine for your needs and is the easiest to implement. You also can use a hardware start trigger to start the tasks if you prefer. It all depends on the level of synchronization you need.
You have not mentioned at what rate you will be acquiring data on your analog inputs. The M Series PCI-6225 has 80 analog inputs and may suit your needs. You will need to know what sampling rate you are trying to achieve. Any M Series device will definitely give you the best value.
Hope this helps!
Laura -
Microsoft SQL Server 2008 R2 (RTM) - 10.50.1600.1 (X64)
Microsoft Corporation Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
this is my developer machine version and same is for production environment.
I need encryption to be enabled for HIPAA compliance.
TDE which is not available in sql server 2008 standard version so cant be applied I believe.
Using encryption keys at instance/database level by symmetric and asymmetric keys not possible as lots of things in it.
tools like
BitLocker Drive Encryption giving issues on production environment and not working correctly.
so question is what all possibilities I have now to implement encryption that would be HIPAA compliant as well. please let me know if there are any other third party tools also.
urgent help needed.....Hi skc_chat,
Based on my research, since you are using SQL Server 2008 R2 Standard Edition, you can have the following options to implement encryption. Refer to :
SQL Server Encryption Options.
1. Besides using encryption keys at instance/database level, you can use cell-level encryption including the following things to encrypt data in SQL Server. For more details, please review this article:
How to: Encrypt a Column of Data.
a. Create Master key
b. Create Certificate
c. Create Symmetric key
d. Apply the encryption key to the column.
2. Encrypt data with the .NET Framework. The .NET Framework supports encryption using the System.Security.Cryptography namespace to perform symmetric or asymmetric encryption.
3. Use Encrypting File System(EFS) to encrypt SQL Server database files.
In addition, you can use other third party software such as
Encryptionizer, DbDefence and so on. However, Microsoft cannot make any representations regarding the quality, safety, or suitability of any the third party software or information.
There is also a discussion about encryption in SQL Server 2008 R2 Standard Edition in the thread below.
http://dba.stackexchange.com/questions/50355/options-for-data-encryption-in-sql-server-2008-r2-standard-edition
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here. -
Troubleshooting help needed: My iMac keeps crashing and restarting with a notice: "Spinlock application timed out" What can I do?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports. -
help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2 02 Computer Science
3 03 Physics
4 04 Chemistry
5 05 Mathematics
7 07 Commerce
8 08 Computer Applications
9 09 Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383 S1 9 4 2 3
384 S2 4 2 5 3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383 S1
384 S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1 383 9
2 383 4
3 383 2
4 383 3
5 384 4
6 384 2
7 384 5
8 384 3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2 SUBJECT3 SUBJECT4
383 S1 Biology Chemistry Computer Science Physics
384 S2 Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID subjects
383 Biology,Chemistry,Computer Science,Physics
384 Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --PradeeshWell I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say. -
Hi all help needed I have a canon 40D. I am thinking of buying a canon 6D.
But not sure that my lenses will work.
I have a 170mm/ 500mm APO Sigma.
A 10/20 ex Sigma HSM IF.
And a 180 APO Sigma Macro or do I have to scrap them and buy others.
ALL Help will be greatly received. Yours BRODIEIn short, I love it. I was going to buy the 5DMark III. After playing with it for a while at my local Fry's store where they put 5DMII, 5DMIII and 6D next to each other, using the same 24-105L lens, I decided to get the 6D and pocket the different for lens later.
I'm upgrading from the 30D. So I think you'll love it. It's a great camera. I have used 5DMII extensively before (borrowing from a close friend).
Funny thing is at first I don't really care about the GPS and Wifi much. I thought they're just marketing-gimmick. But once you have it, it is actually really fun and helpful. For example, I can place the 6D on a long "monopod", then use the app on the phone to control the camera to get some unique perspective on some scenes. It's fun and great. GPS is also nice for travel guy like me.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide -
Help needed! Raid degraded again!
Hi!
Help needed! I hava made bootable RAID with two S-ATAII 250Gb HDD and its not working! Every now and then at bootup I get a message RAID -> DEGRADED... Must be seventh time! Rebuild takes its own time!
What am I doing wrong!
T: Ekku
K8N Neo4 Ultra
AMD 64 4200+
2 Gb RAM
2 x 250 Gb HDD (Maxtor)
nVidia RAID (in mb)
P.S. I wery SORRY with my poor language!I'm going to blame the nVRAID because I've seen issues with it in the past. If your motherboard has another non-nVidia RAID solution, use that instead. Using the nVidia SATA ports as BASE or JBOD is fine and dandy but RAIDing always had issues. It's not even a driver issue I think it's just instability. Latest drivers and even boxed drivers never helped. Granted, some will report success with their rig. But on a professional level I've seen nForce issues on different motherboards and different hard drives that had RAID disaster stories.
Good luck and if you don't have another RAID solution, my suggestion would be to buy a dedicated RAID controller card.
LPB -
HELP NEEDED WITH ADDAPTER-DVI TO VGA.
PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE...
......THIS ENSURES NO SMOKE!!!
THE CARD IS AN ATI RADEON RX9250-DUAL HEAD-.........ADDAPTER IS DVI(ANALOG)MALE TO VGA(ANALOG)FEMALE.
ANY HELP VERY MUCH APPRECIATED........ SEEMS YOU NEED TO BE ROCKET SCI TO ATTACH A BLOODY PICTURE...SO THIS HAS BEEN BIG WASTE OF FING TIME!Quote from: BOBHIGH on 17-December-05, 09:21:31
Get over it mate !
I find it easy t read CAPS...and if you dont like it ...DONT READ IT!
And why bother to reply...some people have nothing better to do.
Yes there chep and easy to come by...Ive already got a new one.
All I wanted was to make a diagram of whats inside the bloody thing...it was a simple question and required a simple answer.
NO NEED TO A WANKA !!
I feel a bann comming up.
Have you tryed Google ? really.. your question is inrelevant. No need to reply indeed.
Why do you come here asking this question anyway ? is it becouse you have a MSI gfx card ? and the adapter has nothing to do with this ?
You think you can come in here yelling.. thinking we have to put up with it and accept your style of posting. This is not a MSI tech center.. it's a user to user center.. Your question has nothing to do with MSI relavant things anyway's.
Google = your friend.
Quote from: BOBHIGH on 17-December-05, 09:21:31
it was a simple question and required a simple answer
Simple for who ? you (buying a new one) ? me ? we ? .really...........
Quote from: Dynamike on 16-December-05, 04:11:48
1: There are allot of diffrent types of those adapters.
If any of the mods have a problem about my reply.. please pm me. -
Help needed for grouping.
Hi,
Help needed .
I have an internal table having 6 .
Ex :
f1 f2 f3 f4 f5 f6
a aa 11 p1 10 10
a aa 12 p1 20 20
b aa 11 p2 30 30
b aa 12 p2 40 30
Now i want to sum the fields f5 and f6 individually and need to display based upon the fields f1 and f4.
To Display :
f1 f2 f3 f4 f5 f6
a aa 11 p1 30 30.
b aa 11 p2 70 60.
can anyone help me.How to do this..?
ThanksHere you go
DATA:
BEGIN OF cur_tab OCCURS 0,
f1 TYPE c,
f2(2) TYPE c,
f3(2) TYPE c,
f4(2) TYPE c,
f5(2) TYPE c,
f6(2) TYPE n,
END OF cur_tab.
DATA:
BEGIN OF sum_tab OCCURS 0,
f1 TYPE c,
f4(2) TYPE c,
f5 TYPE p,
f6 TYPE p,
END OF sum_tab.
DATA:
BEGIN OF final_tab OCCURS 0,
f1 TYPE c,
f2(2) TYPE c,
f3(2) TYPE c,
f4(2) TYPE c,
f5(5) TYPE c,
f6(5) TYPE c,
END OF final_tab.
START-OF-SELECTION.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '10'.
cur_tab-f6 = '10'.
APPEND cur_tab.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '20'.
cur_tab-f6 = '20'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '30'.
cur_tab-f6 = '30'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '40'.
cur_tab-f6 = '30'.
APPEND cur_tab.
LOOP AT cur_tab.
MOVE-CORRESPONDING cur_tab TO sum_tab.
COLLECT sum_tab.
ENDLOOP.
LOOP AT sum_tab.
READ TABLE cur_tab WITH KEY f1 = sum_tab-f1
f4 = sum_tab-f4.
IF sy-subrc NE 0.
WRITE:/ 'Something went very wrong'.
CONTINUE.
ENDIF.
MOVE-CORRESPONDING cur_tab TO final_tab.
MOVE-CORRESPONDING sum_tab TO final_tab.
APPEND final_tab.
ENDLOOP.
LOOP AT final_tab.
WRITE:/1 final_tab-f1,
AT 5 final_tab-f2,
AT 10 final_tab-f3,
AT 15 final_tab-f4,
AT 20 final_tab-f5,
AT 25 final_tab-f6.
ENDLOOP.
and the output
a aa 11 p1 30 30
b aa 11 p2 70 60
Maybe you are looking for
-
i have model A1458...been acting possessed.... apps opening and closing on their own...zooming in and out... not always responsive to my touch... what could be the problem?
-
How to export application version??
Hello all Environment: NW 5.1 SP7, ZFD3.2 SP2 I need to do a data export of the following info: Export fields: Asset.Tag, OS, Application name and Application version. Basically I am querying for an application name and I want the workstation Asset T
-
Cant listen to more than one song in a row with ios4
Ever since i "upgraded" to the new ios4 software i can no longer listen to more than one song in a row without it stopping by itself. if im using apps while playing music it takes me back to the home screen. If someone knows how to fix this that woul
-
Screen black and on buttom broken
please advise how i can get the black screen to turn on. My on button is broken. My phone is working because the phone rings when i call it
-
Purchasing org to company code
Hi gurus, is it possible to assign differant pricing procedure to same vendor?