Help Needed With A Java Installation

Hello,
I'm beyond being a novice with regards to Java. To be quite honest, I don't have the time right now to learn the language, nor do I have the need for anything other than what I am about to ask. I say this upfront to avoid unfriendly comments from people who may criticize my "laziness", NOT to sound disrespectful to those who post or answer questions in this forum.
With that said, here's my question...
I have a Sun/Cobalt RaQ4i server. I'd like to run a few free license Java games that I found on a website. The problem is, RaQ appliances do not ship with Java installed. I've been looking for some way to get it on my server for a few days now, with little luck. I've searched the Java help forums, the Sun/Cobalt forums and a few other help sites such as www.raqzone.com. (...which is why laziness is in quotes up there.) I did find this page... "http://developer.cobalt.com/java/java.raq.php". I have now installed both, the package and the update, on the server. However, the applet still does not run. I don't need the JSP feature, as my site is done in ASP. I don't know what a servlet is, but thought it might be similar to an applet, and would do the trick. *?* Apparently, I was wrong. Can ANYONE tell me what I need to do to get the desired results when I try to run a Java applet on my Cobalt RaQ?? I'd also be willing to be a fee to have it installed... correctly, of course! :)
Thanks in advance for any directions or guidance,
-Daniel
[email protected]

Assuming you're running Solaris, you can download the Java Runtime Environment (JRE) from http://java.sun.com/
One of the provided programs is appletviewer, which you will be able to use to run applets if they are on your local machine. I'm not entirely sure about Solaris, but the JRE may also install the Java Plugin to your browser so you can view applets in the browser.
Apologies if this was already mentioned in the link you provided - registration/login is required, so I didn't read it.
I hope you have more luck with your applets,
-Troy

Similar Messages

Help needed with operating java on other programs

I have a fairly difficult (I think) question.
I am trying to create a program to enact itself on other programs.
It needs to perform 4 functions.
1) Open an exe (such as notepad)
2) Use the exe to open another file (such as a .txt)
3) Find the color of a specific pixel on the screen (ie, (300,800)) and
4) Pull a number from a field in the program
I would apprieciate any help on this, whether in the form of an answer, or a url that could help me with it.
thanks

you could try shell commands to the dos prompt like:
try {
     Properties systemProps = System.getProperties();
     String osVersion = systemProps.getProperty("os.name");
     if (osVersion.equals("Windows 98"))     {
          Runtime.getRuntime().exec("start \"notepad"");
     else if (osVersion.equals("Windows 95"))     {
          Runtime.getRuntime().exec("start \"notepad"");
     else { // win nt (2000 or xp)
          Runtime.getRuntime().exec("cmd.exe /c notepad");
     }catch(IOException err) {}Or locate the notepad.exe and use the runtime class to launch it, to open a txt file is exactly the same but substitute the txt file name instead of notepad, that should launch notepad and open the txt in it, if you mean open notepad and then control it and open a file, that java can?t do, need another language to do it or work with another language and java together. Not sure about the rest,

Help needed with JNI - java.lang.UnsatisfiedLinkError

I need some help with JNI. I am running on Sun Solaris 7 using their CC compiler. I wrote a simple java program that calls a native method to get a pid. Everything work until I use cout or cerr. Can anyone help? Below is what I am working with.
Note: The application works. The problem is when the C++ code tries to display text output.
My error log is as follows:
java Pid
Exception in thread "main" java.lang.UnsatisfiedLinkError: /home/dew/test/libPid.so: ld.so.1: /usr/j2se/bin/../bin/sparc/native_threads/java: fatal: relocation error: file /home/dew/test/libPid.so: symbol __1cDstdEcerr_: referenced symbol not found
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1382)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1306)
at java.lang.Runtime.loadLibrary0(Runtime.java:749)
at java.lang.System.loadLibrary(System.java:820)
at Pid.<clinit>(Pid.java:5)
Pid.java
========
* Pid: Obtains the pid from the jvm.
class Pid {
static { System.loadLibrary("Pid"); }
public native int getPid();
public static void main(String args[])
System.out.println("Before construction of Pid");
Pid z = new Pid();
System.out.println(z.getPid());
z = null;
Pid.cpp
=========
* Native method that obtains and returns the processid.
#include "Pid.h"
#include "unistd.h"
#include <iostream.h>
JNIEXPORT jint JNICALL Java_Pid_getPid(JNIEnv *env, jobject obj) {
/* cout << "Getting pid\n"; */
cerr << "Getting pid\n";
/* printf("Getting pid\n"); */
return getpid();

I forgot to include my build information.
JAVA_HOME = /usr/j2se/
LD_LIBRARY_PATH = ./:/opt/readline/lib:/opt/termcap/lib:/usr/bxpro/xcessory/lib:/${JAVA_HOME}/lib:/usr/RogueWave/workspaces/SOLARIS7/SUNPRO50/0d/lib:/usr/RogueWave/workspaces/SOLARIS7/SUNPRO50/3d/lib:/usr/sybase/lib
javac Pid.java
javah Pid
CC -G -I${JAVA_HOME}/include -I${JAVA_HOME}/include/solaris Pid.cpp -o libPid.so
Thanks again,
Don

Help needed with Sun Java Studio Creator and EJB in a Portlet Project

Hi
I have created an web-application with JSF in Sun Java Studio Creator 2. The web application uses a lot of EJB's which acts as the dataProviders. In a typical jsp page i have more that one data providers(the EJB's) getting used. When i run the project everything opens up properly in the browser and the application seems to be fine.
But when i create a JSP 168 Portlet project and do exactly the same thing for some reason the Apache Pluto(comes as the default Portlet Container with Studio Creator) conks off.
Then i started going ahead step by step:
1. First i created a portletpage and added only one dataProvider(EJB) and ran the project...It gets deployed properly in Pluto and the browser comes up and everything shows up fine.
2. Just to re-confirm i did the same thing with another dataProvider(EJB). So still we have just 1 EJB in the portlet page. As expected it also worked fiine.
3. Then when I added more that one dataProviders(EJBs) in the porlet page the Apache Pluto conks off(saying that Pluto is not available)
I tried doing a lot of things but nothing works...Surprisingly the same thing works when u create a JSF web Application project but the same thing does not work when u create a JSR 168 JSF Portlet Project...
Did anybody face the same problem..Is it a bug in the Studio Creator...Any help would be highly appreciated.

Hi,
There are a few discussion threads in the feedbackprograms portal for Creator 2 EA 2. The URL is:
https://feedbackprograms.sun.com/login.html
In the EA discussion forum you will find threads which discuss the concerned topic. In specific look for threads titled:
# Deploying Portlets
# Taking a JSC Portlet to Tomcat creates a Faces Mapping Error
# Problem with Pluto when trying to deploy a portlet
# Request: JSR-168 Portlet Project without JSF
We kindly request you to post your further queries related to EA in the above mentioned forum.
Cheers
Giri

Help needed with oracle 11g installation

Hi All,
I need some help setting up oracle database with users, schemas and the like.
I am new to oracle - using it due to a project requirement.
Any advice, links etc would be great.
Thanks in Advance

Check out Oracle By Example tutorials here.
http://www.oracle.com/technology/obe/11gr1_db/otn_all_db11gr1.html

Help needed with java

Hello everyone
I'm a Student and new to java and I have been given a question which I have to go through. I have come across a problem with one of the questions and am stuck, so I was wondering if you guys could help me out.
here is my code so far:
A Class that maintains Information about a book
This might form part of a larger application such
as a library system, for example.
@author (your name)
*@version (a version number or a date)*
public class Book
// instance variables or fields
private String author;
private String title;
Set the author and title when the book object is constructed
public Book(String bookAuthor, String bookTitle)
author = bookAuthor;
title = bookTitle;
Return The name of the author.
public String getAuthor()
return author;
Return The name of the title.
public String getTitle()
return title;
and below are the questions that I need to complete. they just want me to add codes to my current one, but the problem is I don't know where to put them and how I should word them, if that makes sense.
Add a further instance variable/field pages to the Book class to store the number of pages in the book.
This should be of type int and should be set to 0 in the Constructor.
Add a second Constructor with signature
public Book(String bookAuthor, String bookTitle, int noPages) so it has a third parameter passed to it as well as the author and title;
this parameter is used - obviously?? - to initialise the number of pages.
Note: This is easiest done by making a copy of the existing Constructor and adding the parameter.
Add a getPages() accessor method that returns the number of pages in the book.
Add a method printDetails() to your Book class. This should print out the Author title and number of pages to the Terminal Window. It is your choice as to how the data is formatted, perhaps all on one line, perhaps on three, and with or without explanatory text. For instance you could print out in the format:
Title: Robinson Crusoe, Author: Daniel Defoe, Pages:226
Add a further instance variable/field refNumber() to your Book class. This stores the Library's reference number. It should be of type String and be initialised to the empty String "" in the constructor, as its initial value is not passed in as a parameter. Instead a public mutator method with the signature:
public void setRefNumber(String ref) should be created. The body of this method should assign the value of the method parameter ref to the refNumber.
Add a corresponding getRefNumber() accessor method to your class so you can check that the mutator works correctly
Modify your printDetails() method to include printing the reference number of the book.
However the method should print the reference number only if it has been set - that is the refNumber has a non-zero length.
If it has not been set, print "ZZZ" instead.
Hint Use a conditional statement whose test calls the length() method of the refNumber String and gives a result like:
Title: Jane Eyre, Author: Charlotte Bronte, Pages:226, RefNo: CB479 or, if the reference number is not set:
Title: Robinson Crusoe, Author: Daniel Defoe, Pages:347, RefNo: ZZZ
Modify your setRefNumber() method so that it sets the refNumber field only if the parameter is a string of at least three characters. If it is less than three, then print an error message (which must contain the word error) and leave the field unchanged
Add a further integer variable/field borrowed to the Book class, to keep a count of the number of times a book has been borrowed. It should (obviously??) be set to 0 in the constructor.
Add a mutator method borrow() to the class. This should increment (add 1 to) the value of borrowed each time it is called.
Include an accessor method getBorrowed() that returns the value of borrowed
Modify Print Details so that it includes the value of the borrowed field along with some explanatory text
PS. sorry it looks so messey

1. In the future, please use a more meaningful subject. "Help needed with java" contains no information. The very fact that you're posting here tells us you need help with Java. The point of the subject is to give the forum an idea of what kind of problem you're having, so that individuals can decide if they're interested and qualified to help.
2. You need to ask a specific question. If you have no idea where to start, then start here: [http://home.earthlink.net/~patricia_shanahan/beginner.html]
3. When you post code, use code tags. Copy the code from the original source in your editor (NOT from an earlier post here, where it will already have lost all formatting), paste it in here, highlight it, and click the CODE button.

HELP NEEDED WITH ADDAPTER-DVI TO VGA.

PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE...
......THIS ENSURES NO SMOKE!!!
THE CARD IS AN ATI RADEON RX9250-DUAL HEAD-.........ADDAPTER IS DVI(ANALOG)MALE TO VGA(ANALOG)FEMALE.
ANY HELP VERY MUCH APPRECIATED........ SEEMS YOU NEED TO BE ROCKET SCI TO ATTACH A BLOODY PICTURE...SO THIS HAS BEEN BIG WASTE OF FING TIME!

Quote from: BOBHIGH on 17-December-05, 09:21:31
Get over it mate !
I find it easy t read CAPS...and if you dont like it ...DONT READ IT!
And why bother to reply...some people have nothing better to do.
Yes there chep and easy to come by...Ive already got a new one.
All I wanted was to make a diagram of whats inside the bloody thing...it was a simple question and required a simple answer.
NO NEED TO A WANKA !!
I feel a bann comming up.
Have you tryed Google ? really.. your question is inrelevant. No need to reply indeed.
Why do you come here asking this question anyway ? is it becouse you have a MSI gfx card ? and the adapter has nothing to do with this ?
You think you can come in here yelling.. thinking we have to put up with it and accept your style of posting. This is not a MSI tech center.. it's a user to user center.. Your question has nothing to do with MSI relavant things anyway's.
Google = your friend.
Quote from: BOBHIGH on 17-December-05, 09:21:31
it was a simple question and required a simple answer
Simple for who ? you (buying a new one) ? me ? we ? .really...........
Quote from: Dynamike on 16-December-05, 04:11:48
1: There are allot of diffrent types of those adapters.
If any of the mods have a problem about my reply.. please pm me.

Help needed with Vista 64 Ultimate

"Help needed with Vista 64 UltimateI I need some help in getting XFI Dolby digital to work
Okay so i went out and I bought a yamaha 630BL reciever, a digital coaxial s/pdif, and a 3.5mm phono plug to fit perfectly to my XFI Extreme Music
-The audio plays fine and reports as a PCM stream when I play it normally, but I can't get dolby digital or DTS to enable for some reason eventhough I bought the DDL & DTS Connect Pack for $4.72
When I click dolby digital li've in DDL it jumps back up to off and has this [The operation was unsuccessful. Please try again or reinstall the application].
Message Edited by Fuzion64 on 03-06-2009 05:33 AMS/PDIF I/O was enabled under speakers in control panel/sound, but S/PDIF Out function was totally disabled
once I set this to enabled Dolby and DTS went acti've.
I also have a question on 5. and Vista 64
-When I game I normally use headphones in game mode or 2. with my headphones, the reason for this is if I set it on 5. I get sounds coming out of all of the wrong channels.
Now when I watch movies or listen to music I switch to 5. sound in entertainment mode, but to make this work properly I have to open CMSS-3D. I then change it from xpand to stereo and put the slider at even center for 50%. If I use the default xpand mode the audio is way off coming out of all of the wrong channels.
How do I make 5. render properly on vista

We ended up getting iTunes cleanly uninstalled and were able to re-install without issue. All is now mostly well.
Peace...

Help needed with itunes

help needed with itunes please tryed to move my itunes libary to my external hard drive itunes move ok and runs fin but i have none of my music or apps or anything all my stuff is in the itunes folder on my external hard drive but there is nothing on ituns how do i get it back help,please

(Make sure the Music (top left) library is selected before beginning this.)
If you have bad song links in your library, hilite them and hit the delete button. Then locate the folder(s) where your music is located and drag and drop into the large library window in iTunes ( where your tracks show up). This will force the tunes into iTunes. Before you start, check your preferences in iTunes specifically under the"Advanced" tab, general settings. I prefer that the 1st 2 boxes are unchecked. (Keep iTunes Music folder organized & Copy files to iTunes Music folder when adding to library). They are designed to let iTunes manage your library. I prefer to manage it myself. Suit yourself. If there is a way for iTunes to restore broken links other than locating one song at a time I haven't found it yet. (I wish Apple would fix this, as I have used that feature in other apps.) This is the way I do it and I have approx. 25,000 songs and podcasts and videos at present. Hope this helps.

Urgent help needed with un-removable junk mail that froze Mail!!

Urgent help needed with un-removable junk mail that froze Mail?
I had 7 junk mails come in this morning, 5 went straight to junk and 2 more I junked.
When I clicked on the Junk folder to empty it, it froze Mail and I can't click on anything, I had to force quit Mail and re-open it. When it re-opens the Junk folder is selected and it is froze, I can't do anything.
I repaired permissions, it did nothing.
I re-booted my computer, on opening Mail the In folder was selected, when I selected Junk, again, it locks up Mail and I can't select them to delete them?
Anyone know how I can delete these Junk mails from my Junk folder without having to open Mail to do it as it would appear this will be the only solution to the problem.

Hi Nigel
If you hold the Shift key when opening the mail app, it will start up without any folders selected & no emails showing. Hopefully this will enable you to start Mail ok.
Then from the Mail menus - choose Mailbox-Erase Junk Mail . The problem mail should now be in the trash. If there's nothing you want to retain from the Trash, you should now choose Mailbox- Erase Deleted Messages....
If you need to double-check the Trash for anything you might want to retain, then view the Trash folder first, before using Erase Junk Mail & move anything you wish to keep to another folder.
The shift key starts Mail in a sort of Safe mode.

Help needed with this form in DW

Hi, i have created this form in dreamweaver but ive got this problem.
In the fields above the text field, the client needs to fill in some info such as name, email telephone number etc.
But the problem is when ill get the messages. Only the text from the large text field is there.
What did i do wrong??
http://www.hureninparamaribo.nl/contact.html
Thank you
Anybody??

Thank you for your response. So what do i have to do to fix this?
Date: Sun, 20 Jan 2013 07:57:56 -0700
From: [email protected]
To: [email protected]
Subject: Help needed with this form in DW
    Re: Help needed with this form in DW
    created by Ken Binney in Dreamweaver General - View the full discussion
You have several duplicate "name" attributes in these rows which also appears in the first row
Telefoon:
Huurperiode:
Aantal personen:
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5008247#5008247
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5008247#5008247
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5008247#5008247. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver General by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Help needed with header and upload onto business catalyst

Can someone help with a problem over a header please?
I have inserted a rectangle with a jpeg image in background, in the 'header' section, underneath the menu. It comes up fine on most pages when previsualised, going right to the side of the screen, but stops just before the edge on certain pages. I have double checked that I have placed it in the right place in relation to the guides on the page.
That's one problem.
The second problem is that I tried to upload onto business catalyst, which got to 60% and refused to go any further, saying it couldn't find the header picture, giving the title and then u4833-3.fr.png. The picture is in the right folder I have double checked. And it isn't a png. Does it have to be ?
And the third problem is that I got an email following my upload from business catalyst in Swedish. I am living in France.
Can anyone help ? Thanks.

Thanks for replying,
How can I check the preview in other browsers before I publish a provisional site with BC?
The rectangle width issue happens on certain pages but not others. The Welecom page is fine when the menu is active, also the contact page, but others are slightly too narrow. Changing the menu spacing doesn’t help - I was already on uniform but tried changing to regular and back.
In design mode the rectangle is set to the edge of the browser, that’s 100%browser width right?
Re BC I have about 200 images on 24 different pages and it seems to be having difficulty uploading some of them. But it has managed a couple I named with spaces but not others I named with just one name.
Is there an issue on size of pictures ? If I need to replace is there a quick way to rename and relink or do I have to insert the photos all over again?
I’m a novice with Muse with an ambitious site !
Thanks for your help.
Mary Featherstone
Envoyé depuis Courrier Windows
De : Sanjit_Das
Envoyé : vendredi 14 février 2014 22:15
À : MFeatherstone
Re: Help needed with header and upload onto business catalyst
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Hi
Answering the questions :
- Have you checked the preview in Muse and also in other browsers ?
- Does the rectangle width issue happens when menu is active , or in any specific state , Try to change the menu with uniform spacing and then check.
- In design view the rectangle is set to 100% browser width ?
With publishing :
- Please try to rename the image file and then relink
- If it happens with other images as well , see if all the image names includes strange characters or spaces.
- Try again to publish
With e-mail from BC :
- Under preferences , please check the country selected.
- If you have previously created partner account in BC and selected country and language then it would follow that, please check that.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6121942#6121942
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6121942#6121942
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6121942#6121942. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Help needed with Elements 5.0

Trying to Edit photos. Click on Edit icon and I get the Message " Attempt to Access invalid address". Click OK get message "Unable to connect to editor application.
What is the problem? I have unenstalled to program and reinstalled, I have tried repairing from CD. Nothing works. Please help.

I have the disc and re-installed a couple of time. No positive result. PSE 09 which I bought thereafter is giving a lot of problems also!!!
Date: Wed, 8 Jun 2011 10:31:24 -0600
From: [email protected]
To: [email protected]
Subject: Help needed with Elements 5.0
Doesn't really help either of us very much but I'm also having the same problem with Elements 5. I downloaded the program so I don't have disks to reinstall. And it seems from the other reply that Adobe has given up with the "old program," which incidentally was working fine until two days ago. Maybe I'll have to think about PSE9!
>

Help needed with BBDM 5.0.1 IP Modem

Hi I was happily connecting thru the Net via the IP Modem in BBDM ver 5.0.1 all this while. Only this happened yesterday. Accidentally during the connection, my 9500 was disconnected from the USB cable. From that moment on, I cannot access the Net using the IP Modem feature. Tried to reboot the laptop as well as the 9500 but now all I get is the connecting message and then a pop up saying there is a hardware failure in the connecting device (or modem) ie the BB 9500.
I even uninstalled BBDM 5.0.1 and reinstalled ver 5.0 and also updated back to 5.0.1 - same story. I can still access the Net via the BB browser etc
Advise please thanks in advance

I have the disc and re-installed a couple of time. No positive result. PSE 09 which I bought thereafter is giving a lot of problems also!!!
Date: Wed, 8 Jun 2011 10:31:24 -0600
From: [email protected]
To: [email protected]
Subject: Help needed with Elements 5.0
Doesn't really help either of us very much but I'm also having the same problem with Elements 5. I downloaded the program so I don't have disks to reinstall. And it seems from the other reply that Adobe has given up with the "old program," which incidentally was working fine until two days ago. Maybe I'll have to think about PSE9!
>

Please help me with these java puzzle ?

Dear all,
My friend send me typical java puzzle about java.util.ArrayList
which is getting messy. Please help me out. It's not a homework.
Please help me with these java puzzle ?
Dear all,
My friend send me typical java puzzle about java.util.ArrayList
which is getting messy. Please help me out. It's not a homework.
import java.util.*;
public class MyInt ______ ________ {
public static void main(String[] args) {
ArrayList<MyInt> list = new ArrayList<MyInt>();
list.add(new MyInt(2));
list.add(new MyInt(1));
Collections.sort(list);
System.out.println(list);
private int i;
public MyInt(int i) { this.i = i; }
public String toString() { return Integer.toString(i); }
________ int ___________ {
MyInt i2 = (MyInt)o;
return ________;
}Hints , fill the underlines with below :
implements
extends
Sortable
Object
Comparable
protected
public
i = i2.i
i
i2.i=i
compare(MyInt o, MyInt i2)
compare(Object o, Object i2)
sort(Object o) sort(MyInt o)
compareTo(MyInt o)
compareTo(Object o)

Dear all,
My friend send me typical java puzzle aboutNotwithstanding your pathetic protestations typicial
of all your posts this is NOT a typical java "puzzle"
but is indeed a typical homework puzzle.
And it's damn easy if you spent 30 minutes with a
tutorial.
DO YOUR OWN HOMEWORK!
Hey i did it.
import java.util.*;
public class MyInt implements Comparable {
public static void main(String[] args) {
ArrayList<MyInt> list = new ArrayList<MyInt>();
list.add(new MyInt(2));
list.add(new MyInt(1));
Collections.sort(list);
System.out.println(list);
private int i;
public MyInt(int i) { this.i = i; }
public String toString() { return Integer.toString(i); }
public int compareTo(Object o){
MyInt i2 = (MyInt)o;
return i;
}E:\>javac MyInt.java
Note: MyInt.java uses unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
E:\>java MyInt
[1, 2]

Help Needed With A Java Installation

Similar Messages

Maybe you are looking for