Help needed with excess Data consumption on Osprey mobile broadband.

Moved to Mobile Network as more appropriate.

Hey Sirdal,
I understand that your pre-paid Wi-Fi 4G service seems to be using up a lot of your data allowance from the time that you recharge your in the last 2 recharges.
This is definitely worth investigating but please also bear in mind that the rates of your data iis dependent on the previous data plan you've recharged on.
So if you've changed from a $20 recharge to $30 recharge, you need to disconnect from the internet before reconnecting in order to reset the rate of your data charge to what is equivalent for the $30 recharge because if you've not refreshed your connection since the $20 recharge, you will be charged the same rate as if you were on the $20 rechage rather than the $30 recharge which means that your allowance will be used up more than what it should be. I hope this makes sense Sirdal.

Similar Messages

Help needed with missing data problem in CRVS2010

We recently upgraded the reporting engine in our product to use Crystal Reports for Visual Studio 2010 (previously engine was CR9). Our quote report, which has numerous subreports and lots of conditional formatting, started losing data when a quote took more than a single page to be printed. We knew the SQL results included the data, but the report was not printing those lines at all or sometimes printing a partial line. In addition, the running total on the report would exclude the lines that were being missed on the next page. In one example submitted by a customer, 3 lines were skipped between pages.
I think I have identified two potential issues that document the possibility of data not being included in the report.
The first potential issue is an issue with the "suppress blank section" option being checked. This issue is supposedly fixed with ADAPT01483793, being released someday with service pack 2 for CRVS2010.
The second potential issue is using shared variables. This issue is supposedly fixed with ADAPT01484308, also targeted for SP2.
Our quote report does not explicitly use shared variables with any of the subreports, but it does have several subreports, each in its own section that has the "supress blank section" option checked. We have other reports that use this feature, as well, and they are not exhibiting the problem.
One different thing about the quote report is that it has a section with multiple suppression options selected. The section has a conditional suppression formula, which controls whether the section is included at all within the report. The section also has the suppress blank section option selected. There are multiple fields within the report that are each conditionally suppressed. In theory, the section's suppress formula could evaluate to true, yet all of the fields within the section are suppressed (due to null values), and then the "suppress blank section" option would kick in.
The missing data only seems to happen when the section is not being suppressed, and at least one of the fields is being included in the report. If I clear the "suppress blank section" check box, and change the section formula to also include the rules applied to the fields in the section, the missing data problem seems to be resolved.
Is this related to ADAPT01483793? Will it be fixed in service pack 2?
If more details are needed, I would be happy to provide a sample report with stored data.

Hi Don,
Have a look at the Record Selection formula in CR Designer ( stand alone ) and when exported to RPT format opening that report in the Designer also.
There's been a few issues with => logic in the record selection formula. It could be you are running into this problem. Look for NOT inserted into your selection formula.
Oh and SP2 is coming out shortly so it may resolve the issue. But if you want you could purchase a support, or if you have a support contract then create a case in SMP and get a rep to work with you to debug the issue.
If you have not try the Trial Version of CR 2011, put it on a VM-ware image or Test PC so you don't corrupt anything for production and have a look at and test it in that designer also. If you purchase a case and it is a bug then you'll get a credit back for the case.
Don
Edited by: Don Williams on Oct 26, 2011 7:40 AM

Help needed with passing data between classes, graph building application?

Good afternoon please could you help me with a problem with my application, my head is starting to hurt?
I have run into some difficulties when trying to build an application that generates a linegraph?
Firstly i have a gui that the client will enter the data into a text area call jta; this data is tokenised and placed into a format the application can use, and past to a seperate class that draws the graph?
I think the problem lies with the way i am trying to put the data into co-ordinate form (x,y) as no line is being generated.
The following code is from the GUI:
+public void actionPerformed(ActionEvent e) {+
+// Takes data and provides program with CoOrdinates+
int[][]data = createData();
+// Set the data data to graph for display+
grph.showGrph(data);
+// Show the frame+
grphFrame.setVisible(true);
+}+
+/** set the data given to the application */+
+private int[][] createData() {+
+     //return data;+
+     String rawData = jta.getText();+
+     StringTokenizer tokens = new StringTokenizer(rawData);+
+     List list = new LinkedList();+
+     while (tokens.hasMoreElements()){+
+          String number = "";+
+          String token = tokens.nextToken();+
+          for (int i=0; i<token.length(); i++){+
+               if (Character.isDigit(token.charAt(i))){+
+                    number += token.substring(i, i+1);+
+               }+
+          }     +
+     }+
+     int [][]data = new int[list.size()/2][2];+
+     int index = -2;+
+     for (int i=0; i<data.length;i++){+
+               index += 2;+
+               data[0] = Integer.parseInt(+
+                         (list.get(index).toString()));+
+               data[i][1] = Integer.parseInt(+
+                         (list.get(index +1).toString()));+
+          }+
+     return data;+
The follwing is the coding for drawing the graph?
+public void showGrph(int[][] data) {+
this.data = data;
repaint();
+}     +
+/** Paint the graph */+
+protected void paintComponent(Graphics g) {+
+//if (data == null)+
+     //return; // No display if data is null+
super.paintComponent(g);
+// x is the start position for the first point+
int x = 30;
int y = 30;
for (int i = 0; i < data.length; i+) {+
+g.drawLine(data[i][0],data[i][1],data[i+1][0],data[i+1][1]);+
+}+
+}+

Thanks for that tip!
package LineGraph;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.*;
import java.util.List;
public class GUI extends JFrame
implements ActionListener {
private JTextArea Filejta;
private JTextArea jta;
private JButton jbtShowGrph = new JButton("Show Chromatogram");
public JButton jbtExit = new JButton("Exit");
public JButton jbtGetFile = new JButton("Search File");
private Grph grph = new Grph();
private JFrame grphFrame = new JFrame();   // Create a new frame to hold the Graph panel
public GUI() {
     JScrollPane pane = new JScrollPane(Filejta = new JTextArea("Default file location: - "));
     pane.setPreferredSize(new Dimension(350, 20));
     Filejta.setWrapStyleWord(true);
     Filejta.setLineWrap(true);
    // Store text area in a scroll pane
    JScrollPane scrollPane = new JScrollPane(jta = new JTextArea("\n\n Type in file location and name and press 'Search File' button: - "
              + "\n\n\n Data contained in the file will be diplayed in this Scrollpane "));
    scrollPane.setPreferredSize(new Dimension(425, 300));
    jta.setWrapStyleWord(true);
    jta.setLineWrap(true);
    // Place scroll pane and button in the frame
    JPanel jpButtons = new JPanel();
    jpButtons.setLayout(new FlowLayout());
    jpButtons.add(jbtShowGrph);
    jpButtons.add(jbtExit);
    JPanel searchFile = new JPanel();
    searchFile.setLayout(new FlowLayout());
    searchFile.add(pane);
    searchFile.add(jbtGetFile);
    add (searchFile, BorderLayout.NORTH);
    add(scrollPane, BorderLayout.CENTER);
    add(jpButtons, BorderLayout.SOUTH);
    // Exit Program
    jbtExit.addActionListener(new ActionListener(){
    public void actionPerformed(ActionEvent e) {
       System.exit(0);
    // Read Files data contents
     jbtGetFile.addActionListener(new ActionListener(){
     public void actionPerformed( ActionEvent e) {
               String FileLoc = Filejta.getText();
               LocateFile clientsFile;
               clientsFile = new LocateFile(FileLoc);
                    if (FileLoc != null){
                         String filePath = clientsFile.getFilePath();
                         String filename = clientsFile.getFilename();
                         String DocumentType = clientsFile.getDocumentType();
     public String getFilecontents(){
          String fileString = "\t\tThe file contains the following data:";
     return fileString;
     // Register listener     // Create a new frame to hold the Graph panel
    jbtShowGrph.addActionListener(this);
    grphFrame.add(grph);
    grphFrame.pack();
    grphFrame.setTitle("Chromatogram showing data contained in file \\filename");
/** Handle the button action */
public void actionPerformed(ActionEvent e) {
    // Takes data and provides program with CoOrdinates
    int[][]data = createData();
    // Set the data data to graph for display
    grph.showGrph(data);
    // Show the frame
    grphFrame.setVisible(true);
/** set the data given to the application */
private int[][] createData() {
       String rawData = jta.getText();
       StringTokenizer tokens = new StringTokenizer(rawData);
       List list = new LinkedList();
       while (tokens.hasMoreElements()){
            String number = "";
            String token = tokens.nextToken();
            for (int i=0; i<token.length(); i++){
                 if (Character.isDigit(token.charAt(i))){
                      number += token.substring(i, i+1);
       int [][]data = new int[list.size()/2][2];
       int index = -2;
       for (int i=0; i<data.length;i++){
                 index += 2;
                 data[0] = Integer.parseInt(
                         (list.get(index).toString()));
               data[i][1] = Integer.parseInt(
                         (list.get(index +1).toString()));
     return data;
public static void main(String[] args) {
GUI frame = new GUI();
frame.setLocationRelativeTo(null); // Center the frame
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setTitle("Clients Data Retrival GUI");
frame.pack();
frame.setVisible(true);
package LineGraph;
import javax.swing.*;
import java.awt.*;
public class Grph extends JPanel {
     private int[][] data;
/** Set the data and display Graph */
public void showGrph(int[][] data) {
this.data = data;
repaint();
/** Paint the graph */
protected void paintComponent(Graphics g) {
//if (data == null)
     //return; // No display if data is null
super.paintComponent(g);
//Find the panel size and bar width and interval dynamically
int width = getWidth();
int height = getHeight();
//int intervalw = (width - 40) / data.length;
//int intervalh = (height - 20) / data.length;
//int individualWidth = (int)(((width - 40) / 24) * 0.60);
////int individualHeight = (int)(((height - 40) / 24) * 0.60);
// Find the maximum data. The maximum data
//int maxdata = 0;
//for (int i = 0; i < data.length; i++) {
//if (maxdata < data[i][0])
//maxdata = data[i][1];
// x is the start position for the first point
int x = 30;
int y = 30;
//draw a vertical axis
g.drawLine(20, height - 45, 20, (height)* -1);
// Draw a horizontal base line4
g.drawLine(20, height - 45, width - 20, height - 45);
for (int i = 0; i < data.length; i++) {
//int Value = i;
// Display a line
//g.drawLine(x, height - 45 - Value, individualWidth, height - 45);
g.drawLine(data[i][0],data[i][1],data[i+1][0],data[i+1][1]);
// Display a number under the x axis
g.drawString((int)(0 + i) + "", (x), height - 30);
// Display a number beside the y axis
g.drawString((int)(0 + i) + "", width - 1277, (y) + 900);
// Move x for displaying the next character
//x += (intervalw);
//y -= (intervalh);
/** Override getPreferredSize */
public Dimension getPreferredSize() {
return new Dimension(1200, 900);

Help needed with binary data in xml (dtd,xml inside)

I am using the java xml sql utility. I am trying to load some info into a table.
my.dtd:
<!ELEMENT ROWSET (ROW*)>
<!ELEMENT ROW (ID,JPEGS?)>
<!ELEMENT ID (#PCDATA)>
<!ELEMENT DESCRIPTION EMPTY>
<!ATTLIST DESCRIPTION file ENTITY #REQUIRED>
<!NOTATION INFOFILE SYSTEM "Files with binary data inside">
<!ENTITY file1 SYSTEM "abc.jpg" NDATA INFOFILE>
xml file:
<?xml version="1.0" standalone="no"?>
<!DOCTYPE ROWSET SYSTEM "MY.DTD">
<ROWSET>
<ROW>
<ID>1272</ID>
<DESCRIPTION file="file1"/>
</ROW>
</ROWSET>
I am using the insertXML method to do this. However, the only value that gets loaded is the ID. abc.jpg is in the same directory where I ran the java program.
Thanks in advance.

Sorry! wrong dtd. It should read this instead:
my.dtd:
<!ELEMENT ROWSET (ROW*)>
<!ELEMENT ROW (ID,DESCRIPTION?)>
<!ELEMENT ID (#PCDATA)>
<!ELEMENT DESCRIPTION EMPTY>
<!ATTLIST DESCRIPTION file ENTITY #REQUIRED>
<!NOTATION INFOFILE SYSTEM "Files with binary data inside">
<!ENTITY file1 SYSTEM "abc.jpg" NDATA INFOFILE>
null

Help needed with Export Data Pump using API

Hi All,
Am trying to do an export data pump feature using the API.
while the export as well as import works fine from the command line, its failing with the API.
This is the command line program:
expdp pxperf/dba@APPN QUERY=dev_pool_data:\"WHERE TIME_NUM > 1204884480100\" DUMPFILE=EXP_DEV.dmp tables=PXPERF.dev_pool_data
Could you help me how should i achieve the same as above in Oracle Data Pump API
DECLARE
h1 NUMBER;
h1 := dbms_datapump.open('EXPORT','TABLE',NULL,'DP_EXAMPLE10','LATEST');
dbms_datapump.add_file(h1,'example3.dmp','DATA_PUMP_TEST',NULL,1);
dbms_datapump.add_file(h1,'example3_dump.log','DATA_PUMP_TEST',NULL,3);
dbms_datapump.metadata_filter(h1,'NAME_LIST','(''DEV_POOL_DATA'')');
END;
Also in the API i want to know how to export and import multiple tables (selective tables only) using one single criteria like "WHERE TIME_NUM > 1204884480100\"

Yes, I have read the Oracle doc.
I was able to proceed as below: but it gives error.
============================================================
SQL> SET SERVEROUTPUT ON SIZE 1000000
SQL> DECLARE
2 l_dp_handle NUMBER;
3 l_last_job_state VARCHAR2(30) := 'UNDEFINED';
4 l_job_state VARCHAR2(30) := 'UNDEFINED';
5 l_sts KU$_STATUS;
6 BEGIN
7 l_dp_handle := DBMS_DATAPUMP.open(
8 operation => 'EXPORT',
9 job_mode => 'TABLE',
10 remote_link => NULL,
11 job_name => '1835_XP_EXPORT',
12 version => 'LATEST');
13
14 DBMS_DATAPUMP.add_file(
15 handle => l_dp_handle,
16 filename => 'x1835_XP_EXPORT.dmp',
17 directory => 'DATA_PUMP_DIR');
18
19 DBMS_DATAPUMP.add_file(
20 handle => l_dp_handle,
21 filename => 'x1835_XP_EXPORT.log',
22 directory => 'DATA_PUMP_DIR',
23 filetype => DBMS_DATAPUMP.KU$_FILE_TYPE_LOG_FILE);
24
25 DBMS_DATAPUMP.data_filter(
26 handle => l_dp_handle,
27 name => 'SUBQUERY',
28 value => '(where "XP_TIME_NUM > 1204884480100")',
29 table_name => 'ldev_perf_data',
30 schema_name => 'XPSLPERF'
31 );
32
33 DBMS_DATAPUMP.start_job(l_dp_handle);
34
35 DBMS_DATAPUMP.detach(l_dp_handle);
36 END;
37 /
DECLARE
ERROR at line 1:
ORA-39001: invalid argument value
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 79
ORA-06512: at "SYS.DBMS_DATAPUMP", line 3043
ORA-06512: at "SYS.DBMS_DATAPUMP", line 3688
ORA-06512: at line 25
============================================================
i have a table called LDEV_PERF_DATA and its in schema XPSLPERF.
value => '(where "XP_TIME_NUM > 1204884480100")',above is the condition i want to filter the data.
However, the below snippet works fine.
============================================================
SET SERVEROUTPUT ON SIZE 1000000
DECLARE
l_dp_handle NUMBER;
l_last_job_state VARCHAR2(30) := 'UNDEFINED';
l_job_state VARCHAR2(30) := 'UNDEFINED';
l_sts KU$_STATUS;
BEGIN
l_dp_handle := DBMS_DATAPUMP.open(
operation => 'EXPORT',
job_mode => 'SCHEMA',
remote_link => NULL,
job_name => 'ldev_may20',
version => 'LATEST');
DBMS_DATAPUMP.add_file(
handle => l_dp_handle,
filename => 'ldev_may20.dmp',
directory => 'DATA_PUMP_DIR');
DBMS_DATAPUMP.add_file(
handle => l_dp_handle,
filename => 'ldev_may20.log',
directory => 'DATA_PUMP_DIR',
filetype => DBMS_DATAPUMP.KU$_FILE_TYPE_LOG_FILE);
DBMS_DATAPUMP.start_job(l_dp_handle);
DBMS_DATAPUMP.detach(l_dp_handle);
END;
============================================================
I dont want to export all contents as the above, but want to export data based on some conditions and only on selective tables.
Any help is highly appreciated.

Urgent help needed with reading data from Cube

Hi Gurus,
Can anyone tell me how to read a value from a record in the CUBE with a key (combination of fields).
Please provide if you have any custome Function Module or piece of code.
Any ideas are highly appreciated.
Thanks,
Regards,
aarthi

Due to the nature of the cube design, that would be difficult, that's why there are API's, FMs, and MDX capabilities - to eliminate the need to navigate the physical structure. Otherwise you would have to concern yourself with:
- that there are two fact tables E and F that would need to be read. The Factview could take of this one.
- you would want to be able to read aggregates if they were available.
- the fact table only as DIM IDs or SIDs (for line item dims) to identify the data, not characteristic values. A Dim ID represents a specific combination of characteristic values.

Pros help needed with post data code

i needed to change the code below to post the userAnswer from radio button group, to an ASPX page so i can read the data in and post it to a database. can anyone help. thanks
btnCheck.addEventListener(MouseEvent.CLICK, checkAnswer);
function checkAnswer(evt:MouseEvent):void {
userAnswer = String(rbg.selectedData);
    messageBox.text = userAnswer + " has been clicked";

//Create the loader object
var prodloader:URLLoader = new URLLoader ();
//Create a URLVariables object to store the details
var variables: URLVariables = new URLVariables();
//Createthe URLRequest object to specify the file to be loaded and the method ie post
var url:String = "url here";
var prodreq:URLRequest = new URLRequest (url);
prodreq.method = URLRequestMethod.POST;
prodreq.data = variables;
function submitHandler(event:Event):void {
    variables.productId = whatever;
    prodloader.load(prodreq);
    btnSubmit.addEventListener(MouseEvent.CLICK, submitHandler);
    function contentLoaded(event:Event):void {
       //Stuff here
        prodloader.addEventListener(Event.COMPLETE, contentLoaded);

Help needed with loading data from ODS to cube

Hi
I am loading data from an ODS to a cube in QA. The update rules are active and definition seems right. I am getting the following error, in the update rules.
"Error in the unit conversion. Error 110 occurred"
Help.
Thanks.

Hi Chintai,
You can see the record number where the error occured in the monitor (RSMO) for this data load > goto the details tab and open up the Processing area (+ sign). Try it out...
Also about ignoring the error record and uploading the rest, this is done if you have set Error Handling in your InfoPackage (Update tab), but this would have to be done before the load starts, not after the error happens.
Hope this helps...
And since you thanked me twice, also please see here:-) https://www.sdn.sap.com/irj/sdn?rid=/webcontent/uuid/7201c12f-0701-0010-f2a6-de5f8ea81a9e [original link is broken]

Help needed with refreshing data

hello OTN!!
i am having a problem in refreshing the data each time i update it.
the problem is that i have a tabular layout of my forms . i have made them all display items and whenever a user wants to update the data and he can click on a link on any row and a small pop up window comes up displaying the data in text boxes user can update an individual row of data but after updating the data when user come back on the tabulary laypout form the data does not refreshes it self and same old(not updated) row of data is displayed.
i have passed parameters between the popup and tabular forms.plz help me urgently and tell me what should i do to refresh my data or behind what trigger i should write the code for refreshing the data. plus so far i have managed to make a button refresh which refreshes the things gaian by execute_query.but i wana do it automatically without pressing button and such .

Well - you could reformat your drive to FAT32 using Disk Utility. Probably not the ideal solution, but it could work if you save the data first. I'd recommend using a different external drive formatted in FAT32, or maybe a large USB flash drive (or memory cards) if you've got one.
I have several external drives and a drive enclosure. One (from SimpleTech) was automatically formatted as an NTFS drive (didn't see that notice before I plugged it into my PC at work). It wouldn't read on my iBook G4 but is OK on my MacBook. I think now that it mounts, I could probably reformat it if necessary. Another Western Digital drive came FAT32 formatted.

Help needed with transferring data.

Hi. I store about 30GB of music on a Western Digital External Hard Drive, connect this to a Packard Bell laptop and transfer it to a Creative Zen Vision M. Recently I bought a MacBook and have created a lot of music on it. I am trying to get the music from my MacBook onto the hard drive (or alternatively the Packard Bell laptop). I have tried moving the music from my Macbook directly onto the external hard drive, but apparently it is 'read-only' and I cannot change this. I've tried copying the files onto DVD-Rs but as I do not have a DVD burner, the MacBook immediately ejects any DVD-Rs I place in it. Any ideas???

Well - you could reformat your drive to FAT32 using Disk Utility. Probably not the ideal solution, but it could work if you save the data first. I'd recommend using a different external drive formatted in FAT32, or maybe a large USB flash drive (or memory cards) if you've got one.
I have several external drives and a drive enclosure. One (from SimpleTech) was automatically formatted as an NTFS drive (didn't see that notice before I plugged it into my PC at work). It wouldn't read on my iBook G4 but is OK on my MacBook. I think now that it mounts, I could probably reformat it if necessary. Another Western Digital drive came FAT32 formatted.

Help needed with this form in DW

Hi, i have created this form in dreamweaver but ive got this problem.
In the fields above the text field, the client needs to fill in some info such as name, email telephone number etc.
But the problem is when ill get the messages. Only the text from the large text field is there.
What did i do wrong??
http://www.hureninparamaribo.nl/contact.html
Thank you
Anybody??

Thank you for your response. So what do i have to do to fix this?
Date: Sun, 20 Jan 2013 07:57:56 -0700
From: [email protected]
To: [email protected]
Subject: Help needed with this form in DW
    Re: Help needed with this form in DW
    created by Ken Binney in Dreamweaver General - View the full discussion
You have several duplicate "name" attributes in these rows which also appears in the first row
Telefoon:
Huurperiode:
Aantal personen:
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5008247#5008247
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5008247#5008247
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5008247#5008247. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver General by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Help needed with Elements 5.0

Trying to Edit photos. Click on Edit icon and I get the Message " Attempt to Access invalid address". Click OK get message "Unable to connect to editor application.
What is the problem? I have unenstalled to program and reinstalled, I have tried repairing from CD. Nothing works. Please help.

I have the disc and re-installed a couple of time. No positive result. PSE 09 which I bought thereafter is giving a lot of problems also!!!
Date: Wed, 8 Jun 2011 10:31:24 -0600
From: [email protected]
To: [email protected]
Subject: Help needed with Elements 5.0
Doesn't really help either of us very much but I'm also having the same problem with Elements 5. I downloaded the program so I don't have disks to reinstall. And it seems from the other reply that Adobe has given up with the "old program," which incidentally was working fine until two days ago. Maybe I'll have to think about PSE9!
>

Help needed with BBDM 5.0.1 IP Modem

Hi I was happily connecting thru the Net via the IP Modem in BBDM ver 5.0.1 all this while. Only this happened yesterday. Accidentally during the connection, my 9500 was disconnected from the USB cable. From that moment on, I cannot access the Net using the IP Modem feature. Tried to reboot the laptop as well as the 9500 but now all I get is the connecting message and then a pop up saying there is a hardware failure in the connecting device (or modem) ie the BB 9500.
I even uninstalled BBDM 5.0.1 and reinstalled ver 5.0 and also updated back to 5.0.1 - same story. I can still access the Net via the BB browser etc
Advise please thanks in advance

I have the disc and re-installed a couple of time. No positive result. PSE 09 which I bought thereafter is giving a lot of problems also!!!
Date: Wed, 8 Jun 2011 10:31:24 -0600
From: [email protected]
To: [email protected]
Subject: Help needed with Elements 5.0
Doesn't really help either of us very much but I'm also having the same problem with Elements 5. I downloaded the program so I don't have disks to reinstall. And it seems from the other reply that Adobe has given up with the "old program," which incidentally was working fine until two days ago. Maybe I'll have to think about PSE9!
>

Help needed with a design!

HELP! I need help with designing something!
IMAGE on this link " http://i1072.photobucket.com/albums/w362/jjnilsson/DSC_0188.jpg "
i need this patch on the picture to be "remade" in higher definition and the text should be MILF HUNTERS intstead of milf hunter... Anyone that might be able to help me out?
reson for all this is that its gonna be made to a 30x40cm big patch fitting the back of our Team jackets!
send me a pm or a mail ([email protected]) if you need any futher info or if you can help me out! I am really thankful for all the help i can get!
With best regards J. Nilsson, Milf Hunters Mc

I simply did as i got a tip on FB to do
quote from adobe themselves on facebook "Adobe Illustrator You might also want to try asking on our forums as there are many people that can help there as well! http://forums.adobe.com/community/illustrator/illustrator_general"
sry if it was wrong of me, simply thought there might be someone nice out there to give a helping hand
Date: Tue, 5 Jun 2012 13:41:48 -0600
From: [email protected]
To: [email protected]
Subject: Help needed with a design!
    Re: Help needed with a design!
    created by in Illustrator - View the full discussion
This really isn't the place to ask for free services.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4467790#4467790
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4467790#4467790. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Illustrator by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Help needed with java

Hello everyone
I'm a Student and new to java and I have been given a question which I have to go through. I have come across a problem with one of the questions and am stuck, so I was wondering if you guys could help me out.
here is my code so far:
A Class that maintains Information about a book
This might form part of a larger application such
as a library system, for example.
@author (your name)
*@version (a version number or a date)*
public class Book
// instance variables or fields
private String author;
private String title;
Set the author and title when the book object is constructed
public Book(String bookAuthor, String bookTitle)
author = bookAuthor;
title = bookTitle;
Return The name of the author.
public String getAuthor()
return author;
Return The name of the title.
public String getTitle()
return title;
and below are the questions that I need to complete. they just want me to add codes to my current one, but the problem is I don't know where to put them and how I should word them, if that makes sense.
Add a further instance variable/field pages to the Book class to store the number of pages in the book.
This should be of type int and should be set to 0 in the Constructor.
Add a second Constructor with signature
public Book(String bookAuthor, String bookTitle, int noPages) so it has a third parameter passed to it as well as the author and title;
this parameter is used - obviously?? - to initialise the number of pages.
Note: This is easiest done by making a copy of the existing Constructor and adding the parameter.
Add a getPages() accessor method that returns the number of pages in the book.
Add a method printDetails() to your Book class. This should print out the Author title and number of pages to the Terminal Window. It is your choice as to how the data is formatted, perhaps all on one line, perhaps on three, and with or without explanatory text. For instance you could print out in the format:
Title: Robinson Crusoe, Author: Daniel Defoe, Pages:226
Add a further instance variable/field refNumber() to your Book class. This stores the Library's reference number. It should be of type String and be initialised to the empty String "" in the constructor, as its initial value is not passed in as a parameter. Instead a public mutator method with the signature:
public void setRefNumber(String ref) should be created. The body of this method should assign the value of the method parameter ref to the refNumber.
Add a corresponding getRefNumber() accessor method to your class so you can check that the mutator works correctly
Modify your printDetails() method to include printing the reference number of the book.
However the method should print the reference number only if it has been set - that is the refNumber has a non-zero length.
If it has not been set, print "ZZZ" instead.
Hint Use a conditional statement whose test calls the length() method of the refNumber String and gives a result like:
Title: Jane Eyre, Author: Charlotte Bronte, Pages:226, RefNo: CB479 or, if the reference number is not set:
Title: Robinson Crusoe, Author: Daniel Defoe, Pages:347, RefNo: ZZZ
Modify your setRefNumber() method so that it sets the refNumber field only if the parameter is a string of at least three characters. If it is less than three, then print an error message (which must contain the word error) and leave the field unchanged
Add a further integer variable/field borrowed to the Book class, to keep a count of the number of times a book has been borrowed. It should (obviously??) be set to 0 in the constructor.
Add a mutator method borrow() to the class. This should increment (add 1 to) the value of borrowed each time it is called.
Include an accessor method getBorrowed() that returns the value of borrowed
Modify Print Details so that it includes the value of the borrowed field along with some explanatory text
PS. sorry it looks so messey

1. In the future, please use a more meaningful subject. "Help needed with java" contains no information. The very fact that you're posting here tells us you need help with Java. The point of the subject is to give the forum an idea of what kind of problem you're having, so that individuals can decide if they're interested and qualified to help.
2. You need to ask a specific question. If you have no idea where to start, then start here: [http://home.earthlink.net/~patricia_shanahan/beginner.html]
3. When you post code, use code tags. Copy the code from the original source in your editor (NOT from an earlier post here, where it will already have lost all formatting), paste it in here, highlight it, and click the CODE button.

Help needed with excess Data consumption on Osprey mobile broadband.

Similar Messages

Maybe you are looking for