Help needed with Letterbox issue

Hi
I am in the middle of creating a movie for DVD and all of a sudden the letterbox effect has started taking place when I import from another movie. The result is that some of my movie has the black bars at the top and the bottom, the rest is "normal".
So I have a couple of questions. Why would the footage I am importing suddenly letterbox when I haven't changed any settings?
If I leave it as it is what will be the end result when I burn it to DVD? Will the clips that have letterboxed show up differently?
How can I fix it? I have read these discussions and read The Missing Manual, however I cannot find an explanation.
Cheers
NikkiG

I initially tried to Import all the clips using the Import command. I got a message along the lines of Quicktime couldn't parse it - error 43. Then I tried selecting all the clips and did a copy and paste - that was when it first went into the letterboxing mode. I then tried just dragging and dropping one clip, same thing happened.
I don't have the original footage to re-import as it was donwloaded several months ago, so I can't just re-import the original.
This isn't the end of the world for me as I have a Plan B (make 2 DVDs), however I would rather everything I've filmed was on one. I would also like to see if I can ascertain what caused it so that I don't do it again.
NikkiG

Similar Messages

  • Help needed with Vista 64 Ultimate

    "Help needed with Vista 64 UltimateI I need some help in getting XFI Dolby digital to work
    Okay so i went out and I bought a yamaha 630BL reciever, a digital coaxial s/pdif, and a 3.5mm phono plug to fit perfectly to my XFI Extreme Music
    -The audio plays fine and reports as a PCM stream when I play it normally, but I can't get dolby digital or DTS to enable for some reason eventhough I bought the DDL & DTS Connect Pack for $4.72
    When I click dolby digital li've in DDL it jumps back up to off and has this [The operation was unsuccessful. Please try again or reinstall the application].
    Message Edited by Fuzion64 on 03-06-2009 05:33 AMS/PDIF I/O was enabled under speakers in control panel/sound, but S/PDIF Out function was totally disabled
    once I set this to enabled Dolby and DTS went acti've.
    I also have a question on 5. and Vista 64
    -When I game I normally use headphones in game mode or 2. with my headphones, the reason for this is if I set it on 5. I get sounds coming out of all of the wrong channels.
    Now when I watch movies or listen to music I switch to 5. sound in entertainment mode, but to make this work properly I have to open CMSS-3D. I then change it from xpand to stereo and put the slider at even center for 50%. If I use the default xpand mode the audio is way off coming out of all of the wrong channels.
    How do I make 5. render properly on vista

    We ended up getting iTunes cleanly uninstalled and were able to re-install without issue.  All is now mostly well.
    Peace...

  • Will Apple help me with this issue?

    Dear Sir or Madam，
    I am a student in China, I really need your help, my iphone now problems bothers me! HELP ME PLEASE!!!
    As I bought my iPhone 4s(16GB,White) in the USA from Sprint, full price with tax,  unlocked ,it was excepted to be a global phone. But now I come across with some problems in China  using local carrier.Now I am in China, not the normal use of the phone, I rely on odd jobs to earn, very not easy, English is not my mother tongue, maybe there are many grammatical mistakes, I hope you'll forgive me! Mobile phone can not be used normally I am very sad, I can not contact the parents and friends, can not let them worry about me, I've tried all means, including the upgrade to 6.1, but still can not solve the problem, I think maybe I am in China, so can not be used normally, at this moment I am very anxious, because of the time difference, it is later I can send mail, you can see it, please help me, a Chinese student's request!
    I tried all the possible solutions from the Internet, and the Official solution offered by Apple (http://support.apple.com/kb/TS4459), but it doesn't seem to work.
    Will Apple help me with this issue? Please do.THANK YOU VERY MUCH!!!

    We are not Apple, and Apple does not unlock phones. Sprint will unlock phones, but you have to qualify. One of the qualifications is to have been a customer in good standing for a period of time. You can check their website for what that is. After that, they can unlock the GSM side of the phone for International use, that is it. If you are on a CDMA carrier, then it cannot be unlocked. Are you trying to use a local SIM card in China?
    Your only option is to contact Sprint to see if you qualify for an unlock. Only they can unlock it. Sprint is one of the poorest choices to take to another country.

  • Help needed with security scenario

    Hello,
    this is my first post in this section and I'm posting it because I have tried to make this scenario work for a few weeks and I still cannot do it. This is what I want to achieve:
    I need to create safe communication channel through 4 different entities. Client -> Merchant -> Bank 1 -> Bank 2
    This implies that I need to create 3 SSL servers (Merchant and two banks). OK, I have read a lot about creating SSL servers and I think they worked pretty good but now I'm getting problems with validating certificates and I got completely lost. Please answer me on the following questions:
    1. Do I need to set "keyStore" AND (!) "trustedStore" system properties for EVERY entity?
    I'm asking because I have found few examples when people set only keyStore for servers and trustedStore for client. I've been setting both and I think this was wrong. Am I right?
    2. What happens if I set this property for each entity? After all, I need to do it at least 3 times (for servers) so will one change of system property affect the other?
    3. Do I need to actually validate any certificates? I mean, in the example provided by my University someone was checking certificates in client class, but I haven't found anyone doing the same thing in web-tutorials. Shall I do it then, or not? Maybe it is done automatically by framework while accepting connections?
    Please help me with this issues cause I don't have any more patience to do it myself.
    Best regards,
    Łukasz Bachman

    1. Do I need to set "keyStore" AND (!) "trustedStore" system properties for EVERY entity?Only for the entities that have to authenticate themselves. This includes all SSL servers and it also includes any clients whose servers are set with needClientAuth=true, which is not the default. For most SSL clients you only need to set the truststore.
    2. What happens if I set this property for each entity? After all, I need to do it at least 3 times (for servers) so will one change of system property affect the other?Presumably each entity occupies its own JVM. The system properties only apply within a single JVM.
    3. Do I need to actually validate any certificates?SSL does most of that for you. You just (a) need to ensure that the appropriate server or CA certificates are in the clients' truststores: this 'authentication'; and (b) you also need to do an authorization step at each client, where you check the DN of the peer certificate to see if it is the expected entity. That's all.

  • Pls help me with the issue(pls )

    Hi Experts!
    Please help me with the issue.
    I need to transfer data from .net system to sap system for
    a customised tcode.
    The whole process Should be automated .
    I researched on this topic, and it seems ALE IDOC ,BAPI OR RFC can be used.
    But i really dnt know how to move forward with this issue.
    Regards
    Jaya

    Hi,
    Thanks for the reply.
    The problem is That i m going to do ale idoc for the first time and moreover I need to upload the excel file using customised tcode zcs15.
    The screen of zcs15 consists of 2 fields.
    One is for the name and other one is for uploading excel file.
    Can u pls guide me.
    Will reward u for sure.
    Regards
    Jaya

  • Help needed with header and upload onto business catalyst

    Can someone help with a problem over a header please?
    I have inserted a rectangle with a jpeg image in  background, in the 'header' section, underneath the menu. It comes up fine on most pages when previsualised, going right to the side of the screen, but stops just before the edge on certain pages. I have double checked that I have placed it in the right place in relation to the guides on the page.
    That's one problem.
    The second problem is that I tried to upload onto business catalyst, which got to 60% and refused to go any further, saying it couldn't find the header picture, giving the title and then u4833-3.fr.png. The picture is in the right folder I have double checked. And it isn't a png. Does it have to be ?
    And the third problem is that I got an email following my upload from business catalyst in Swedish. I am living in France.
    Can anyone help ? Thanks.

    Thanks for replying,
    How can I check the preview in other browsers before I publish a provisional site with BC?
    The rectangle width issue happens on certain pages but not others. The Welecom page is fine when the menu is active, also the contact page, but others are slightly too narrow. Changing the menu spacing doesn’t help - I was already on uniform but tried changing to regular and back.
    In design mode the rectangle is set to the edge of the browser, that’s 100%browser width right?
    Re BC I have about 200 images on 24 different pages and it seems to be having difficulty uploading some of them. But it has managed a couple I named with spaces but not others I named with just one name.
    Is there an issue on size of pictures ? If I need to replace is there a quick way to rename and relink or do I have to insert the photos all over again?
    I’m a novice with Muse with an ambitious site !
    Thanks for your help.
    Mary Featherstone
    Envoyé depuis Courrier Windows
    De : Sanjit_Das
    Envoyé : vendredi 14 février 2014 22:15
    À : MFeatherstone
    Re: Help needed with header and upload onto business catalyst
    created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion 
    Hi
    Answering the questions :
    - Have you checked the preview in Muse and also in other browsers ?
    - Does the rectangle width issue happens when menu is active , or in any specific state , Try to change the menu with uniform spacing and then check.
    - In design view the rectangle is set to 100% browser width ?
    With publishing :
    - Please try to rename the image file and then relink
    - If it happens with other images as well , see if all the image names includes strange characters or spaces.
    - Try again to publish
    With e-mail from BC :
    - Under preferences , please check the country selected.
    - If you have previously created partner account in BC and selected country and language then it would follow that, please check that.
    Thanks,
    Sanjit
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6121942#6121942
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6121942#6121942
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6121942#6121942. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Help with using Adobe Muse CC at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • HELP NEEDED WITH ADDAPTER-DVI TO VGA.

    PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE...
    ......THIS ENSURES NO SMOKE!!!                                                                                           
    THE CARD IS AN ATI RADEON RX9250-DUAL HEAD-.........ADDAPTER IS DVI(ANALOG)MALE TO VGA(ANALOG)FEMALE.
    ANY HELP VERY MUCH APPRECIATED........ SEEMS YOU NEED TO BE ROCKET SCI TO ATTACH A BLOODY PICTURE...SO THIS HAS BEEN BIG WASTE OF FING TIME!

    Quote from: BOBHIGH on 17-December-05, 09:21:31
    Get over it mate !
    I find it easy t read CAPS...and if you dont like it ...DONT READ IT!
    And why bother to reply...some people have nothing better to do.
    Yes there chep and easy to come by...Ive already got a new one.
    All I wanted was to make a diagram of whats inside the bloody thing...it was a simple question and required a simple answer.
    NO NEED TO A WANKA !!
    I feel a bann comming up.
    Have you tryed Google ? really.. your question is inrelevant. No need to reply indeed.
    Why do you come here asking this question anyway ? is it becouse you have a MSI gfx card ? and the adapter has nothing to do with this ?
    You think you can come in here yelling.. thinking we have to put up with it and accept your style of posting. This is not a MSI tech center.. it's a user to user center.. Your question has nothing to do with MSI relavant things anyway's.
    Google = your friend.
    Quote from: BOBHIGH on 17-December-05, 09:21:31
    it was a simple question and required a simple answer
    Simple for who ? you (buying a new one) ? me ? we ?   .really...........
    Quote from: Dynamike on 16-December-05, 04:11:48
    1: There are allot of diffrent types of those adapters.
    If any of the mods have a problem about my reply.. please pm me.

  • Help needed with itunes

    help needed with itunes please tryed to move my itunes libary to my external hard drive itunes move ok and runs fin but i have none of my music or apps or anything all my stuff is in the itunes folder on my external hard drive but there is nothing on ituns how do i get it back help,please

    (Make sure the Music (top left) library is selected before beginning this.)
    If you have bad song links in your library, hilite them and hit the delete button. Then locate the folder(s) where your music is located and drag and drop into the large library window in iTunes ( where your tracks show up). This will force the tunes into iTunes. Before you start, check your preferences in iTunes specifically under the"Advanced" tab, general settings. I prefer that the 1st 2 boxes are unchecked. (Keep iTunes Music folder organized & Copy files to iTunes Music folder when adding to library). They are designed to let iTunes manage your library. I prefer to manage it myself. Suit yourself. If there is a way for iTunes to restore broken links other than locating one song at a time I haven't found it yet. (I wish Apple would fix this, as I have used that feature in other apps.) This is the way I do it and I have approx. 25,000 songs and podcasts and videos at present. Hope this helps.

  • Urgent help needed; Database shutdown issues.

    Urgent help needed; Database shutdown issues.
    Hi all,
    I am trying to shutdown my SAP database and am facing the issues below, can someone please suggest how I can go about resolving this issue and restart the database?
    SQL> shutdown immediate
    ORA-24324: service handle not initialized
    ORA-24323: value not allowed
    ORA-01089: immediate shutdown in progress - no operations are permitted
    SQL> shutdown abort
    ORA-01031: insufficient privileges
    Thanks and regards,
    Iqbal

    Hi,
    check SAP Note 700548 - FAQ: Oracle authorizations
    also check Note 834917 - Oracle Database 10g: New database role SAPCONN
    regards,
    kaushal

  • Urgent help needed with un-removable junk mail that froze Mail!!

    Urgent help needed with un-removable junk mail that froze Mail?
    I had 7 junk mails come in this morning, 5 went straight to junk and 2 more I junked.
    When I clicked on the Junk folder to empty it, it froze Mail and I can't click on anything, I had to force quit Mail and re-open it. When it re-opens the Junk folder is selected and it is froze, I can't do anything.
    I repaired permissions, it did nothing.
    I re-booted my computer, on opening Mail the In folder was selected, when I selected Junk, again, it locks up Mail and I can't select them to delete them?
    Anyone know how I can delete these Junk mails from my Junk folder without having to open Mail to do it as it would appear this will be the only solution to the problem.

    Hi Nigel
    If you hold the Shift key when opening the mail app, it will start up without any folders selected & no emails showing. Hopefully this will enable you to start Mail ok.
    Then from the Mail menus - choose Mailbox-Erase Junk Mail . The problem mail should now be in the trash. If there's nothing you want to retain from the Trash, you should now choose Mailbox- Erase Deleted Messages....
    If you need to double-check the Trash for anything you might want to retain, then view the Trash folder first, before using Erase Junk Mail & move anything you wish to keep to another folder.
    The shift key starts Mail in a sort of Safe mode.

  • Help needed with this form in DW

    Hi, i have created this form in dreamweaver but ive got this problem.
    In the fields above the text field, the client needs to fill in some info such as name, email telephone number etc.
    But the problem is when ill get the messages. Only the text from the large text field is there.
    What did i do wrong??
    http://www.hureninparamaribo.nl/contact.html
    Thank you
    Anybody??

    Thank you for your response. So what do i have to do to fix this?
    Date: Sun, 20 Jan 2013 07:57:56 -0700
    From: [email protected]
    To: [email protected]
    Subject: Help needed with this form in DW
        Re: Help needed with this form in DW
        created by Ken Binney in Dreamweaver General - View the full discussion
    You have several duplicate "name" attributes in these rows which also appears in the first row
    Telefoon:
    Huurperiode:
    Aantal personen:
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5008247#5008247
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5008247#5008247
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5008247#5008247. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Dreamweaver General by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • HT201210 (The iPhone "Named" cannot be restored at this time because the iPhone software update server could not be contacted or is temporarily unavailable.) can anyone help me with this issue, every time i try to restore it will come up like this error m

    (The iPhone "Named" cannot be restored at this time because the iPhone software update server could not be contacted or is temporarily unavailable.)
    can anyone help me with this issue, every time i try to restore it will come up like this error message.

    Restore the iPhone when connected to iTunes by cable.
    Still the same TS1275?
    Is your iPhone jailbroken?
    Or
    Has your computer ever been used to jailbrake or downgrade (Tinyumbrella) any iPhone?

  • What will i do..there is a message show, "your device in not more eligible to create a free i cloud acount"..and when i try a new one it ask an account number, but i dont have...can you help me with this issue..

    What will i do..there is a message show, "your device in not more eligible to create a free i cloud acount"..and when i try a new one it ask an account number, but i dont have...can you help me with this issue..?
    I try also my old icloud user but its not recognizing the accoun...

    What will i do..there is a message show, "your device in not more eligible to create a free i cloud acount"..and when i try a new one it ask an account number, but i dont have...can you help me with this issue..?
    I try also my old icloud user but its not recognizing the accoun...

  • Hey guy can you please help me with this issue PLEASE!

    Hey Apple can you please help me with this issue, i have a iPhone 3gs and when i put my sim card into the iPhone it makes iphone 3gs shut down suddenly how do i fix that?
    iPhone version: 6.0.1
    service provider: Vodafone nz

    You could restarting your phone that sometimes fixes issues
    Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart (no data will be lost).

  • The genius bar sold me a LaCie 500 GB EHD today but I can't get it to work properly.  Can I schedule another genius bar appt. to help me with this issue even though the EHD is not an Apple product?

    The genius bar sold me a LaCie 500 GB EHD today but I can't get it to work properly.  Can I schedule another genius bar appt. to help me with this issue even though the EHD is not an Apple product?

    Yes, if you purchased it in an Apple store, they should be able to assist you.  Bring your MBP with you as well as the Drive.
    Ciao.

Maybe you are looking for