Help needed with MD70 document for OAf personlisations!!Urgent

Hi everyone,
I have done around 10 odd personalisations/extensions on a standard form and i am supposed to prepare a md70 document for the same.
I have not seen any template for md70 which seems good enough to map the personalisation steps
Moreover,how do i explain the VO and CO extension steps in the document,i am totally blank
Please suggest something and please if anyone has a sample md70 done for oaf personlizations,i will be grateful if you could send it to hatsoffforu@gmail for refrence purpose alone
Thanks in Advance

Hi Sumit,
I have been through metalink but i could not find anything relevant.As far as other sources,i did put my query in mukul's blog too.The thing is i dont know too many OAF developers,so i gotta turn to the ones i know.
I am anywas trying to draft the document based on d2k personlization putting pers snapshots and stuff,but since u guys have already worked on real time requirements,i just thought it will be better.cos i still don know how much too to explain in the doc

Similar Messages

  • Help needed with printer settings for wired ethernet connection

    I'm hoping someone can help me with a network printing issue. I have a large format color laser printer (Tektronix Phaser) and since moving to OS 10.6 I can't figure out how to configure the printer so that the system sees it. I have a simple wired ethernet network with a couple of Macs and a couple of printers. All devices are connected via a switch. When using earlier OSs I was able to connect to the Phaser using Ethertalk. Obviously this is no longer supported and I can't figure out how to set the printer so the OS can see it. I have lots of options which can be turned on or off and in some cases set up in other ways: Ethertalk, IPX, Netware, TCP/IP, DNS, LPR, HTTP and remote internet printing, I've tried messing with these but the result is always the same--system doesn't see the printer. Currently Ethertalk is on, IPX and Netware are off, TCP/IP is on, DNS and LPR are on, as are AppSocket, HTTP, FTP and remote internet printing. I can change the IP address but no matter what address I've tried I cannot ping the printer. (I'm using a Gutenprint driver for this printer.)
    I don't really know enough about all this to get anywhere and I haven't been able to find help anywhere even from tech friends. Xerox won't help me and neither will Apple. Any help would be appreciated. I can supply more detail on specifics where necessary. Thanks, Bob

    Old Phaser models may becoming more and more difficult to use, but you can give this a try.
    1. Configure the printer via front panel to use TCP/IP and enable DHCP if it's supported. If not then you will need to configure an IP address for the printer together with your local network's mask, and gateway IP address. Except for the first the others will be provided by opening Network preferences to see what those settings are. The printer's IP address needs to be set somewhere within the range of IP addresses your router provides locally.
    2. You need the PPD file required for your printer. If you have the Phaser driver installer you can use it to install the PPD or you can extract the specific PPD from the installer package. This part is tricky because I don't know where you may find the driver now if you don't have the installer. The older installers can be accessed through the Finder by selecting the package then CTRL- or RIGHT-click and select Show Package Contents from the contextual menu. You can then rummage through the package to search for the PPD for your printer. Then navigate to the /Library/Printers/PPD/Contents/Resources/ folder and drop the PPD file inside.
    3. Open Print & Fax preferences and click on Add [+] to add a new printer. Click on the IP icon in the toolbar. Select Line Printer Daemon - LPD from the Protocol drop down menu. Input the IP address you assigned the printer in the Address field. You can file in the optional fields that follow. Then from the Print Using drop down menu locate the listing for your printer and select it.

  • Help Needed with HTML code for Image Positioning

    Hi All,
    Need a little help with some code for positioning images.
    I initially used the following:
    This is fine, but the border automatically puts a black border around the photo - how do I change it to white? Is there a way to set margins too, to prevent the text butting up against the photo?
    I also used the following code with success:
    <style type="text/css"
    img
    float:right;
    border:2px solid white;
    margin: 0px 0px 15px 20px
    </style>
    This code works, however the problem with it is it is not individual to just one photo - it moved all my photos and on that page, I wanted one photo floated to left and another to the right.
    If I use this code, how can I make it photo specific, so that it only affects the placement, margins and borders of one photo?
    Any help would be great.
    Thanks

    CSS question, not iWeb question. Regardless, use inline CSS styling for the image. You can also wrap the image in its own tag and declare an id or simply declare an id for the img tag, then set the style for the id_name:
    <style type="text/css"
    img#id_name
    float:right;
    border:2px solid white;
    margin: 0px 0px 15px 20px
    </style>
    If you want to control the style of more than one image on a page but not all then use a class instead of an id.
    the border automatically puts a black border around the photo - how do I change it to white? Is there a way to set margins too, to prevent the text butting up against the photo?
    I believe you have discovered a solution for this according to your CSS code. You have set the border to white by looking at the code and adjusting it appropriately. Your margin is declared in the CSS also, adjust the pixels appropriately.
    Read up some more on CSS to educate yourself further. I suggest w3schools.com or a CSS forum instead of the iWeb forum if you have CSS questions. It's kind of like if you drive your auto to the supermarket so you decide to go to the supermarket and ask everyone in the produce section to help when you have car problems. All the supermarket does is provide a place to park your auto. If you have car problems then ask a mechanic. iWeb (and most of its users) doesn't specialize in code, it simply provides an area for you to place it. Granted you might get lucky and find a mechanic in the produce section of the supermarket, but you're more likely to find a specialist at an auto swap meet (or CSS coding forum)!

  • Help needed with existing printer for MacBook

    Apologies if this question is in the wrong section of the forum - please feel free to move it!
    I am new to the "Apple Experience" and have had this superb MacBook for a couple of week now. I need to connect my existing laser printer, a Samsung ML-1750 to the MacBook and so far, I have had no joy. The Samsung website is not a lot of help with regard to downloading a Mac driver and while the MacBook seems to have found the ML-1750, when printing, the printer just outputs a load of garbage! From where do I obtain the correct driver!
    Please help!
    Thanks, Dan

    Hi Dan,
    welcome to macbook forum,
    Try gimp-print as suggested by Kappy and or you can choose either the nearest model to your samsungs or generic post scripts printer.
    http://gimp-print.sourceforge.net/
    http://gutenprint.sourceforge.net/pSupportedPrinters.php3
    Good luck

  • Help needed with titles in Elements 7.0 - urgent!

    Hey there,
    I believe I have quite a simple task, but I can simply not find it in my Premiere Elements 7.0 options.
    I want a title to pop in, character, by character.
    Not fade in, not fly in, not come from below, nor from above. Simply appear, as if I would use a typewriter. Tack, tack, tack.
    FadeInByCharacters in the Text Animation menu is the closest, but it's still a fade.
    I am looking for it since hours. There must be a way!
    Your help would be greatly greatly appreciated!!

    There are several ways to do what you want.
    First, there are several titler programs, that have 100's of animation Presets built into them. ProDAD's Heroglyph is one.
    However, you can do exactly what you want with Titler, albeit with several steps. The trick is to create the "title" as one Title for each letter. Place thes onto progressively higher Video Tracks, and space them to create the pacing that you need.
    If you have a very long Title, it might be worth investing in Heroglyph, or similar.
    Good luck,
    Hunt

  • HELP NEEDED WITH ADDAPTER-DVI TO VGA.

    PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE...
    ......THIS ENSURES NO SMOKE!!!                                                                                           
    THE CARD IS AN ATI RADEON RX9250-DUAL HEAD-.........ADDAPTER IS DVI(ANALOG)MALE TO VGA(ANALOG)FEMALE.
    ANY HELP VERY MUCH APPRECIATED........ SEEMS YOU NEED TO BE ROCKET SCI TO ATTACH A BLOODY PICTURE...SO THIS HAS BEEN BIG WASTE OF FING TIME!

    Quote from: BOBHIGH on 17-December-05, 09:21:31
    Get over it mate !
    I find it easy t read CAPS...and if you dont like it ...DONT READ IT!
    And why bother to reply...some people have nothing better to do.
    Yes there chep and easy to come by...Ive already got a new one.
    All I wanted was to make a diagram of whats inside the bloody thing...it was a simple question and required a simple answer.
    NO NEED TO A WANKA !!
    I feel a bann comming up.
    Have you tryed Google ? really.. your question is inrelevant. No need to reply indeed.
    Why do you come here asking this question anyway ? is it becouse you have a MSI gfx card ? and the adapter has nothing to do with this ?
    You think you can come in here yelling.. thinking we have to put up with it and accept your style of posting. This is not a MSI tech center.. it's a user to user center.. Your question has nothing to do with MSI relavant things anyway's.
    Google = your friend.
    Quote from: BOBHIGH on 17-December-05, 09:21:31
    it was a simple question and required a simple answer
    Simple for who ? you (buying a new one) ? me ? we ?   .really...........
    Quote from: Dynamike on 16-December-05, 04:11:48
    1: There are allot of diffrent types of those adapters.
    If any of the mods have a problem about my reply.. please pm me.

  • Help needed with Vista 64 Ultimate

    "Help needed with Vista 64 UltimateI I need some help in getting XFI Dolby digital to work
    Okay so i went out and I bought a yamaha 630BL reciever, a digital coaxial s/pdif, and a 3.5mm phono plug to fit perfectly to my XFI Extreme Music
    -The audio plays fine and reports as a PCM stream when I play it normally, but I can't get dolby digital or DTS to enable for some reason eventhough I bought the DDL & DTS Connect Pack for $4.72
    When I click dolby digital li've in DDL it jumps back up to off and has this [The operation was unsuccessful. Please try again or reinstall the application].
    Message Edited by Fuzion64 on 03-06-2009 05:33 AMS/PDIF I/O was enabled under speakers in control panel/sound, but S/PDIF Out function was totally disabled
    once I set this to enabled Dolby and DTS went acti've.
    I also have a question on 5. and Vista 64
    -When I game I normally use headphones in game mode or 2. with my headphones, the reason for this is if I set it on 5. I get sounds coming out of all of the wrong channels.
    Now when I watch movies or listen to music I switch to 5. sound in entertainment mode, but to make this work properly I have to open CMSS-3D. I then change it from xpand to stereo and put the slider at even center for 50%. If I use the default xpand mode the audio is way off coming out of all of the wrong channels.
    How do I make 5. render properly on vista

    We ended up getting iTunes cleanly uninstalled and were able to re-install without issue.  All is now mostly well.
    Peace...

  • Help needed with itunes

    help needed with itunes please tryed to move my itunes libary to my external hard drive itunes move ok and runs fin but i have none of my music or apps or anything all my stuff is in the itunes folder on my external hard drive but there is nothing on ituns how do i get it back help,please

    (Make sure the Music (top left) library is selected before beginning this.)
    If you have bad song links in your library, hilite them and hit the delete button. Then locate the folder(s) where your music is located and drag and drop into the large library window in iTunes ( where your tracks show up). This will force the tunes into iTunes. Before you start, check your preferences in iTunes specifically under the"Advanced" tab, general settings. I prefer that the 1st 2 boxes are unchecked. (Keep iTunes Music folder organized & Copy files to iTunes Music folder when adding to library). They are designed to let iTunes manage your library. I prefer to manage it myself. Suit yourself. If there is a way for iTunes to restore broken links other than locating one song at a time I haven't found it yet. (I wish Apple would fix this, as I have used that feature in other apps.) This is the way I do it and I have approx. 25,000 songs and podcasts and videos at present. Hope this helps.

  • Urgent help needed with un-removable junk mail that froze Mail!!

    Urgent help needed with un-removable junk mail that froze Mail?
    I had 7 junk mails come in this morning, 5 went straight to junk and 2 more I junked.
    When I clicked on the Junk folder to empty it, it froze Mail and I can't click on anything, I had to force quit Mail and re-open it. When it re-opens the Junk folder is selected and it is froze, I can't do anything.
    I repaired permissions, it did nothing.
    I re-booted my computer, on opening Mail the In folder was selected, when I selected Junk, again, it locks up Mail and I can't select them to delete them?
    Anyone know how I can delete these Junk mails from my Junk folder without having to open Mail to do it as it would appear this will be the only solution to the problem.

    Hi Nigel
    If you hold the Shift key when opening the mail app, it will start up without any folders selected & no emails showing. Hopefully this will enable you to start Mail ok.
    Then from the Mail menus - choose Mailbox-Erase Junk Mail . The problem mail should now be in the trash. If there's nothing you want to retain from the Trash, you should now choose Mailbox- Erase Deleted Messages....
    If you need to double-check the Trash for anything you might want to retain, then view the Trash folder first, before using Erase Junk Mail & move anything you wish to keep to another folder.
    The shift key starts Mail in a sort of Safe mode.

  • Help needed with this form in DW

    Hi, i have created this form in dreamweaver but ive got this problem.
    In the fields above the text field, the client needs to fill in some info such as name, email telephone number etc.
    But the problem is when ill get the messages. Only the text from the large text field is there.
    What did i do wrong??
    http://www.hureninparamaribo.nl/contact.html
    Thank you
    Anybody??

    Thank you for your response. So what do i have to do to fix this?
    Date: Sun, 20 Jan 2013 07:57:56 -0700
    From: [email protected]
    To: [email protected]
    Subject: Help needed with this form in DW
        Re: Help needed with this form in DW
        created by Ken Binney in Dreamweaver General - View the full discussion
    You have several duplicate "name" attributes in these rows which also appears in the first row
    Telefoon:
    Huurperiode:
    Aantal personen:
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5008247#5008247
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5008247#5008247
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5008247#5008247. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Dreamweaver General by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Help need my mac pro for school..it has Grey screen..spinning wheel...repaid disk ok...repair disk permission all repaired but one warning...

    Help need my mac pro for school..it has Grey screen..spinning wheel...
    I think I have  mountain lion OS X....I have done I think almost every suggestion I've seen in discussion boards.
    Boot in recovery repaired disk...ok...repair disk permission...all repaired but one warning...I've tried to reinstall lion (without losing data) and it Got all the way to one minute to be done and then the time change back two hours and kept doing this all night long.  I haven't done a back up due to no external for time machine.
    I hope someone can please help me I've been going crazy for a week now trying to figure this out.  I use my computer for school and I'm currently very behind from in my school work  thank you
    Also I've checked my available space  424.91 free of 750 gigs....disk is verified

    Welcome to the Apple Support Communities
    Try holding the Shift key while your Mac is starting to start into safe mode. Then, after starting in safe mode, open Finder, select Go menu (on the menu bar) > Go to Folder, and type /Library/StartupItems. Then, empty this folder and restart the Mac.
    If your Mac starts after doing this, it was a problem with a third-party app that starts automatically when you turn on the computer. It won't start automatically anymore after doing that

  • Need some sample documents for DME development

    Hi,
    I need some sample documents for DME development. I expect any information covering developing DME formats and steps for downloading a DME file (this I need for checking my formats).
    please, send any relevant info you have to mail id mindaugas.kazlauskas at gmail.com
    Many thanks and reward points ahead!
    Regards,
    Mindaugas

    Hi,
    the main thing is that I need format with payment information structured in single column, like this:
    //separator//
    value1
    value2
    value3
    //separator//
    value1
    value2
    value3
    //separator//
    maybe there is any SAP format structured like this?
    Regards,
    Mindaugas

  • Help needed with header and upload onto business catalyst

    Can someone help with a problem over a header please?
    I have inserted a rectangle with a jpeg image in  background, in the 'header' section, underneath the menu. It comes up fine on most pages when previsualised, going right to the side of the screen, but stops just before the edge on certain pages. I have double checked that I have placed it in the right place in relation to the guides on the page.
    That's one problem.
    The second problem is that I tried to upload onto business catalyst, which got to 60% and refused to go any further, saying it couldn't find the header picture, giving the title and then u4833-3.fr.png. The picture is in the right folder I have double checked. And it isn't a png. Does it have to be ?
    And the third problem is that I got an email following my upload from business catalyst in Swedish. I am living in France.
    Can anyone help ? Thanks.

    Thanks for replying,
    How can I check the preview in other browsers before I publish a provisional site with BC?
    The rectangle width issue happens on certain pages but not others. The Welecom page is fine when the menu is active, also the contact page, but others are slightly too narrow. Changing the menu spacing doesn’t help - I was already on uniform but tried changing to regular and back.
    In design mode the rectangle is set to the edge of the browser, that’s 100%browser width right?
    Re BC I have about 200 images on 24 different pages and it seems to be having difficulty uploading some of them. But it has managed a couple I named with spaces but not others I named with just one name.
    Is there an issue on size of pictures ? If I need to replace is there a quick way to rename and relink or do I have to insert the photos all over again?
    I’m a novice with Muse with an ambitious site !
    Thanks for your help.
    Mary Featherstone
    Envoyé depuis Courrier Windows
    De : Sanjit_Das
    Envoyé : vendredi 14 février 2014 22:15
    À : MFeatherstone
    Re: Help needed with header and upload onto business catalyst
    created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion 
    Hi
    Answering the questions :
    - Have you checked the preview in Muse and also in other browsers ?
    - Does the rectangle width issue happens when menu is active , or in any specific state , Try to change the menu with uniform spacing and then check.
    - In design view the rectangle is set to 100% browser width ?
    With publishing :
    - Please try to rename the image file and then relink
    - If it happens with other images as well , see if all the image names includes strange characters or spaces.
    - Try again to publish
    With e-mail from BC :
    - Under preferences , please check the country selected.
    - If you have previously created partner account in BC and selected country and language then it would follow that, please check that.
    Thanks,
    Sanjit
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6121942#6121942
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6121942#6121942
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6121942#6121942. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Help with using Adobe Muse CC at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Help needed with a design!

    HELP! I need help with designing something!
    IMAGE on this link " http://i1072.photobucket.com/albums/w362/jjnilsson/DSC_0188.jpg "
    i need this patch on the picture to be "remade" in higher definition and the text should be MILF HUNTERS intstead of milf hunter... Anyone that might be able to help me out?
    reson for all this is that its gonna be made to a 30x40cm big patch fitting the back of our Team jackets!
    send me a pm or a mail ([email protected]) if you need any futher info or if you can help me out! I am really thankful for all the help i can get!
    With best regards J. Nilsson, Milf Hunters Mc

    I simply did as i got a tip on FB to do
    quote from adobe themselves on facebook "Adobe Illustrator You might also want to try asking on our forums as there are many people that can help there as well! http://forums.adobe.com/community/illustrator/illustrator_general"
    sry if it was wrong of me, simply thought there might be someone nice out there to give a helping hand
    Date: Tue, 5 Jun 2012 13:41:48 -0600
    From: [email protected]
    To: [email protected]
    Subject: Help needed with a design!
        Re: Help needed with a design!
        created by in Illustrator - View the full discussion
    This really isn't the place to ask for free services.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4467790#4467790
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4467790#4467790. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Illustrator by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Help needed with java

    Hello everyone
    I'm a Student and new to java and I have been given a question which I have to go through. I have come across a problem with one of the questions and am stuck, so I was wondering if you guys could help me out.
    here is my code so far:
    A Class that maintains Information about a book
    This might form part of a larger application such
    as a library system, for example.
    @author (your name)
    *@version (a version number or a date)*
    public class Book
    // instance variables or fields
    private String author;
    private String title;
    Set the author and title when the book object is constructed
    public Book(String bookAuthor, String bookTitle)
    author = bookAuthor;
    title = bookTitle;
    Return The name of the author.
    public String getAuthor()
    return author;
    Return The name of the title.
    public String getTitle()
    return title;
    and below are the questions that I need to complete. they just want me to add codes to my current one, but the problem is I don't know where to put them and how I should word them, if that makes sense.
    Add a further instance variable/field pages to the Book class to store the number of pages in the book.
    This should be of type int and should be set to 0 in the Constructor.
    Add a second Constructor with signature
    public Book(String bookAuthor, String bookTitle, int noPages) so it has a third parameter passed to it as well as the author and title;
    this parameter is used - obviously?? - to initialise the number of pages.
    Note: This is easiest done by making a copy of the existing Constructor and adding the parameter.
    Add a getPages() accessor method that returns the number of pages in the book.
    Add a method printDetails() to your Book class. This should print out the Author title and number of pages to the Terminal Window. It is your choice as to how the data is formatted, perhaps all on one line, perhaps on three, and with or without explanatory text. For instance you could print out in the format:
    Title: Robinson Crusoe, Author: Daniel Defoe, Pages:226
    Add a further instance variable/field refNumber() to your Book class. This stores the Library's reference number. It should be of type String and be initialised to the empty String "" in the constructor, as its initial value is not passed in as a parameter. Instead a public mutator method with the signature:
    public void setRefNumber(String ref) should be created. The body of this method should assign the value of the method parameter ref to the refNumber.
    Add a corresponding getRefNumber() accessor method to your class so you can check that the mutator works correctly
    Modify your printDetails() method to include printing the reference number of the book.
    However the method should print the reference number only if it has been set - that is the refNumber has a non-zero length.
    If it has not been set, print "ZZZ" instead.
    Hint Use a conditional statement whose test calls the length() method of the refNumber String and gives a result like:
    Title: Jane Eyre, Author: Charlotte Bronte, Pages:226, RefNo: CB479 or, if the reference number is not set:
    Title: Robinson Crusoe, Author: Daniel Defoe, Pages:347, RefNo: ZZZ
    Modify your setRefNumber() method so that it sets the refNumber field only if the parameter is a string of at least three characters. If it is less than three, then print an error message (which must contain the word error) and leave the field unchanged
    Add a further integer variable/field borrowed to the Book class, to keep a count of the number of times a book has been borrowed. It should (obviously??) be set to 0 in the constructor.
    Add a mutator method borrow() to the class. This should increment (add 1 to) the value of borrowed each time it is called.
    Include an accessor method getBorrowed() that returns the value of borrowed
    Modify Print Details so that it includes the value of the borrowed field along with some explanatory text
    PS. sorry it looks so messey

    1. In the future, please use a more meaningful subject. "Help needed with java" contains no information. The very fact that you're posting here tells us you need help with Java. The point of the subject is to give the forum an idea of what kind of problem you're having, so that individuals can decide if they're interested and qualified to help.
    2. You need to ask a specific question. If you have no idea where to start, then start here: [http://home.earthlink.net/~patricia_shanahan/beginner.html]
    3. When you post code, use code tags. Copy the code from the original source in your editor (NOT from an earlier post here, where it will already have lost all formatting), paste it in here, highlight it, and click the CODE button.

Maybe you are looking for