Help needed with Media Manager

I recently purchased the Blackberry Curve, 8310 and downloaded the most updated version of Media Manager. While connected to my PC with the USB cable, the desktop manager fires up, updates my email accounts, etc. and seems to be able to communicate with the Blackberry. However, when I then open up Media Manager to transfer photos, it does not recognize the phone connection. Any help in defining what I'm missing here would be appreciated.

If you have a media card in your BlackBerry then the easier way to transfer items to it is to just click on the My Computer icon and drag and drop them to the appropriate folder. Music to the \blackberry\music folder and so on. As for the problem with the Media manager, it should be remedied by installing the OS for your device to your computer.
Message Edited by tschweitzer on 10-21-2008 11:21 AM
Message Edited by tschweitzer on 10-21-2008 11:22 AM

Similar Messages

Emergency help needed re media manager

Hi all,
Hopefully somebody can help me with this.
I am due to start an audio mix on a project for a client tomorrow. He currently has the FCP project on his Mac Pro but due to recording to a tascam portable recorder on set all his audio files are called audio1, audio2 etc. He has a folders on his drive with each days recordings so there are many folders which all contain files called audio1 etc.
I asked him to put his picture lock sequence onto an external drive using media manager but it doesn't seem to able to handle the audio files since there are so many with the same name from different folders so the external now has only one file with each name where on the picture lock sequence there are many audio clips called audio1 for example.
I hope this makes sense.
Please post here if you can help me.
Thanks in advance
Michael

If you have a media card in your BlackBerry then the easier way to transfer items to it is to just click on the My Computer icon and drag and drop them to the appropriate folder. Music to the \blackberry\music folder and so on. As for the problem with the Media manager, it should be remedied by installing the OS for your device to your computer.
Message Edited by tschweitzer on 10-21-2008 11:21 AM
Message Edited by tschweitzer on 10-21-2008 11:22 AM

FCP 7 sequence not transfering to external hard drive with media manager

Ok so heres the problem. I started making a bunch of webisodes and after I got through editing and finishing the first two on my computer, I realized while I was working on the third one I would need to transfer my workflow to an external hard drive.
My goal was to transfer all the projects individualy with media manager to a 1.5tb external hard drive I just purchased and then delete all the projects and associated files off my computer. Then set the new scratch bin to the hard drive and continue working on the third episode from the hard drive.
However, thank god when I used media manager I said "copy" the files. I opened the project I had copied in the hard drive to see if it was all there and there was no sequence with all my editing! I'm not sure why it didn't import the sequence. All the clips are still I the project tab.
Can anybody help? Am I doing this right?
Thanks!

The information for the Sequence is contained in the .fcp project file that should be in the same folder as your Media Managed clips. Double click it to open the new version.

Help needed with itunes

help needed with itunes please tryed to move my itunes libary to my external hard drive itunes move ok and runs fin but i have none of my music or apps or anything all my stuff is in the itunes folder on my external hard drive but there is nothing on ituns how do i get it back help,please

(Make sure the Music (top left) library is selected before beginning this.)
If you have bad song links in your library, hilite them and hit the delete button. Then locate the folder(s) where your music is located and drag and drop into the large library window in iTunes ( where your tracks show up). This will force the tunes into iTunes. Before you start, check your preferences in iTunes specifically under the"Advanced" tab, general settings. I prefer that the 1st 2 boxes are unchecked. (Keep iTunes Music folder organized & Copy files to iTunes Music folder when adding to library). They are designed to let iTunes manage your library. I prefer to manage it myself. Suit yourself. If there is a way for iTunes to restore broken links other than locating one song at a time I haven't found it yet. (I wish Apple would fix this, as I have used that feature in other apps.) This is the way I do it and I have approx. 25,000 songs and podcasts and videos at present. Hope this helps.

Help needed with header and upload onto business catalyst

Can someone help with a problem over a header please?
I have inserted a rectangle with a jpeg image in background, in the 'header' section, underneath the menu. It comes up fine on most pages when previsualised, going right to the side of the screen, but stops just before the edge on certain pages. I have double checked that I have placed it in the right place in relation to the guides on the page.
That's one problem.
The second problem is that I tried to upload onto business catalyst, which got to 60% and refused to go any further, saying it couldn't find the header picture, giving the title and then u4833-3.fr.png. The picture is in the right folder I have double checked. And it isn't a png. Does it have to be ?
And the third problem is that I got an email following my upload from business catalyst in Swedish. I am living in France.
Can anyone help ? Thanks.

Thanks for replying,
How can I check the preview in other browsers before I publish a provisional site with BC?
The rectangle width issue happens on certain pages but not others. The Welecom page is fine when the menu is active, also the contact page, but others are slightly too narrow. Changing the menu spacing doesn’t help - I was already on uniform but tried changing to regular and back.
In design mode the rectangle is set to the edge of the browser, that’s 100%browser width right?
Re BC I have about 200 images on 24 different pages and it seems to be having difficulty uploading some of them. But it has managed a couple I named with spaces but not others I named with just one name.
Is there an issue on size of pictures ? If I need to replace is there a quick way to rename and relink or do I have to insert the photos all over again?
I’m a novice with Muse with an ambitious site !
Thanks for your help.
Mary Featherstone
Envoyé depuis Courrier Windows
De : Sanjit_Das
Envoyé : vendredi 14 février 2014 22:15
À : MFeatherstone
Re: Help needed with header and upload onto business catalyst
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Hi
Answering the questions :
- Have you checked the preview in Muse and also in other browsers ?
- Does the rectangle width issue happens when menu is active , or in any specific state , Try to change the menu with uniform spacing and then check.
- In design view the rectangle is set to 100% browser width ?
With publishing :
- Please try to rename the image file and then relink
- If it happens with other images as well , see if all the image names includes strange characters or spaces.
- Try again to publish
With e-mail from BC :
- Under preferences , please check the country selected.
- If you have previously created partner account in BC and selected country and language then it would follow that, please check that.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6121942#6121942
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6121942#6121942
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6121942#6121942. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Trying to consolidate project with Media Manager but it's not working

I have a 3 minute final video that I want to consolidate with media manager. I would like to have it copy the portion of the clips I used plus 1 second handles. I have checked every appropriate box but it still will not create smaller clips. For example I have a 5 GB movie clip that I used about 4 seconds of in my final edit. Final Cut is still copying over the whole file into the new folder instead of just extracting the portion I used plus the handle. I have deselected the box referring to include master clips outside of selection.
I have gotten this to work before, is this a known issue? Am I doing something wrong?
Thanks.

Robert,
Media Manager has a few quarks (you've no doubt noticed!). The two biggest that I've noticed are:
CUTS MADE IN TIMELINE OF SEQUENCE
Once a larger clip is loaded into a sequence, and cuts are made to it within the sequence Media Manager loses track of the the missing middle parts. For instance if you load an hour long clip into a sequence. Make a cut at 5 minutes and a cut at 55 minutes, then delete the middle 50 minutes and slide the two cuts together; Media Manager should represent that only 10 minutes would be retained when "deleted unused media is selected." Instead, it will think the entire cut is still being used.
*To solve this: "Select All" cuts in the sequence, then right click and select "Make Clip Independent"*
CUTS WITH SPEED CHANGES
The other issue with Media Manager, cuts that have speed changes (anything other 100%) may not reconnect correctly in the new consolidated sequence. This has been a long time problem and has gotten much better in version 6. However, it still has some weirdness...
*To solve this: "Make sure you add some amount of handle. I use 1 sec and it seems to work on larger complex projects."*
Hope that helps. Good luck.
Dan

HELP NEEDED WITH ADDAPTER-DVI TO VGA.

PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE...
......THIS ENSURES NO SMOKE!!!
THE CARD IS AN ATI RADEON RX9250-DUAL HEAD-.........ADDAPTER IS DVI(ANALOG)MALE TO VGA(ANALOG)FEMALE.
ANY HELP VERY MUCH APPRECIATED........ SEEMS YOU NEED TO BE ROCKET SCI TO ATTACH A BLOODY PICTURE...SO THIS HAS BEEN BIG WASTE OF FING TIME!

Quote from: BOBHIGH on 17-December-05, 09:21:31
Get over it mate !
I find it easy t read CAPS...and if you dont like it ...DONT READ IT!
And why bother to reply...some people have nothing better to do.
Yes there chep and easy to come by...Ive already got a new one.
All I wanted was to make a diagram of whats inside the bloody thing...it was a simple question and required a simple answer.
NO NEED TO A WANKA !!
I feel a bann comming up.
Have you tryed Google ? really.. your question is inrelevant. No need to reply indeed.
Why do you come here asking this question anyway ? is it becouse you have a MSI gfx card ? and the adapter has nothing to do with this ?
You think you can come in here yelling.. thinking we have to put up with it and accept your style of posting. This is not a MSI tech center.. it's a user to user center.. Your question has nothing to do with MSI relavant things anyway's.
Google = your friend.
Quote from: BOBHIGH on 17-December-05, 09:21:31
it was a simple question and required a simple answer
Simple for who ? you (buying a new one) ? me ? we ? .really...........
Quote from: Dynamike on 16-December-05, 04:11:48
1: There are allot of diffrent types of those adapters.
If any of the mods have a problem about my reply.. please pm me.

Help needed with Vista 64 Ultimate

"Help needed with Vista 64 UltimateI I need some help in getting XFI Dolby digital to work
Okay so i went out and I bought a yamaha 630BL reciever, a digital coaxial s/pdif, and a 3.5mm phono plug to fit perfectly to my XFI Extreme Music
-The audio plays fine and reports as a PCM stream when I play it normally, but I can't get dolby digital or DTS to enable for some reason eventhough I bought the DDL & DTS Connect Pack for $4.72
When I click dolby digital li've in DDL it jumps back up to off and has this [The operation was unsuccessful. Please try again or reinstall the application].
Message Edited by Fuzion64 on 03-06-2009 05:33 AMS/PDIF I/O was enabled under speakers in control panel/sound, but S/PDIF Out function was totally disabled
once I set this to enabled Dolby and DTS went acti've.
I also have a question on 5. and Vista 64
-When I game I normally use headphones in game mode or 2. with my headphones, the reason for this is if I set it on 5. I get sounds coming out of all of the wrong channels.
Now when I watch movies or listen to music I switch to 5. sound in entertainment mode, but to make this work properly I have to open CMSS-3D. I then change it from xpand to stereo and put the slider at even center for 50%. If I use the default xpand mode the audio is way off coming out of all of the wrong channels.
How do I make 5. render properly on vista

We ended up getting iTunes cleanly uninstalled and were able to re-install without issue. All is now mostly well.
Peace...

Urgent help needed with un-removable junk mail that froze Mail!!

Urgent help needed with un-removable junk mail that froze Mail?
I had 7 junk mails come in this morning, 5 went straight to junk and 2 more I junked.
When I clicked on the Junk folder to empty it, it froze Mail and I can't click on anything, I had to force quit Mail and re-open it. When it re-opens the Junk folder is selected and it is froze, I can't do anything.
I repaired permissions, it did nothing.
I re-booted my computer, on opening Mail the In folder was selected, when I selected Junk, again, it locks up Mail and I can't select them to delete them?
Anyone know how I can delete these Junk mails from my Junk folder without having to open Mail to do it as it would appear this will be the only solution to the problem.

Hi Nigel
If you hold the Shift key when opening the mail app, it will start up without any folders selected & no emails showing. Hopefully this will enable you to start Mail ok.
Then from the Mail menus - choose Mailbox-Erase Junk Mail . The problem mail should now be in the trash. If there's nothing you want to retain from the Trash, you should now choose Mailbox- Erase Deleted Messages....
If you need to double-check the Trash for anything you might want to retain, then view the Trash folder first, before using Erase Junk Mail & move anything you wish to keep to another folder.
The shift key starts Mail in a sort of Safe mode.

Help needed with this form in DW

Hi, i have created this form in dreamweaver but ive got this problem.
In the fields above the text field, the client needs to fill in some info such as name, email telephone number etc.
But the problem is when ill get the messages. Only the text from the large text field is there.
What did i do wrong??
http://www.hureninparamaribo.nl/contact.html
Thank you
Anybody??

Thank you for your response. So what do i have to do to fix this?
Date: Sun, 20 Jan 2013 07:57:56 -0700
From: [email protected]
To: [email protected]
Subject: Help needed with this form in DW
    Re: Help needed with this form in DW
    created by Ken Binney in Dreamweaver General - View the full discussion
You have several duplicate "name" attributes in these rows which also appears in the first row
Telefoon:
Huurperiode:
Aantal personen:
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5008247#5008247
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5008247#5008247
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5008247#5008247. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver General by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Help needed with Elements 5.0

Trying to Edit photos. Click on Edit icon and I get the Message " Attempt to Access invalid address". Click OK get message "Unable to connect to editor application.
What is the problem? I have unenstalled to program and reinstalled, I have tried repairing from CD. Nothing works. Please help.

I have the disc and re-installed a couple of time. No positive result. PSE 09 which I bought thereafter is giving a lot of problems also!!!
Date: Wed, 8 Jun 2011 10:31:24 -0600
From: [email protected]
To: [email protected]
Subject: Help needed with Elements 5.0
Doesn't really help either of us very much but I'm also having the same problem with Elements 5. I downloaded the program so I don't have disks to reinstall. And it seems from the other reply that Adobe has given up with the "old program," which incidentally was working fine until two days ago. Maybe I'll have to think about PSE9!
>

Help needed with BBDM 5.0.1 IP Modem

Hi I was happily connecting thru the Net via the IP Modem in BBDM ver 5.0.1 all this while. Only this happened yesterday. Accidentally during the connection, my 9500 was disconnected from the USB cable. From that moment on, I cannot access the Net using the IP Modem feature. Tried to reboot the laptop as well as the 9500 but now all I get is the connecting message and then a pop up saying there is a hardware failure in the connecting device (or modem) ie the BB 9500.
I even uninstalled BBDM 5.0.1 and reinstalled ver 5.0 and also updated back to 5.0.1 - same story. I can still access the Net via the BB browser etc
Advise please thanks in advance

I have the disc and re-installed a couple of time. No positive result. PSE 09 which I bought thereafter is giving a lot of problems also!!!
Date: Wed, 8 Jun 2011 10:31:24 -0600
From: [email protected]
To: [email protected]
Subject: Help needed with Elements 5.0
Doesn't really help either of us very much but I'm also having the same problem with Elements 5. I downloaded the program so I don't have disks to reinstall. And it seems from the other reply that Adobe has given up with the "old program," which incidentally was working fine until two days ago. Maybe I'll have to think about PSE9!
>

Question about making a project backup with Media Manager

I have several projects that I am working on right now. I'd like to make a backup of these projects and burn them to DVDs. The question I have is when I select "copy" with Media Manager it shows me how much space the backup will be. Without selecting the render files each of my projects would fit a a single DVD. If I don't include render files can they easily be recreated by just re-rendering the backup project?
Thanks!

Backing up a project file takes very little space. Backing up the media associated with that project can take up a tremendous amount of space. By using Media Manager, I assume that you want to back up (copy) the media ... correct?
Do you only have 4.3gb of media used in the project you want to back up? That's all the data a DVD disc will hold.
-DH

Help needed with a design!

HELP! I need help with designing something!
IMAGE on this link " http://i1072.photobucket.com/albums/w362/jjnilsson/DSC_0188.jpg "
i need this patch on the picture to be "remade" in higher definition and the text should be MILF HUNTERS intstead of milf hunter... Anyone that might be able to help me out?
reson for all this is that its gonna be made to a 30x40cm big patch fitting the back of our Team jackets!
send me a pm or a mail ([email protected]) if you need any futher info or if you can help me out! I am really thankful for all the help i can get!
With best regards J. Nilsson, Milf Hunters Mc

I simply did as i got a tip on FB to do
quote from adobe themselves on facebook "Adobe Illustrator You might also want to try asking on our forums as there are many people that can help there as well! http://forums.adobe.com/community/illustrator/illustrator_general"
sry if it was wrong of me, simply thought there might be someone nice out there to give a helping hand
Date: Tue, 5 Jun 2012 13:41:48 -0600
From: [email protected]
To: [email protected]
Subject: Help needed with a design!
    Re: Help needed with a design!
    created by in Illustrator - View the full discussion
This really isn't the place to ask for free services.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4467790#4467790
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4467790#4467790. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Illustrator by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Help needed with java

Hello everyone
I'm a Student and new to java and I have been given a question which I have to go through. I have come across a problem with one of the questions and am stuck, so I was wondering if you guys could help me out.
here is my code so far:
A Class that maintains Information about a book
This might form part of a larger application such
as a library system, for example.
@author (your name)
*@version (a version number or a date)*
public class Book
// instance variables or fields
private String author;
private String title;
Set the author and title when the book object is constructed
public Book(String bookAuthor, String bookTitle)
author = bookAuthor;
title = bookTitle;
Return The name of the author.
public String getAuthor()
return author;
Return The name of the title.
public String getTitle()
return title;
and below are the questions that I need to complete. they just want me to add codes to my current one, but the problem is I don't know where to put them and how I should word them, if that makes sense.
Add a further instance variable/field pages to the Book class to store the number of pages in the book.
This should be of type int and should be set to 0 in the Constructor.
Add a second Constructor with signature
public Book(String bookAuthor, String bookTitle, int noPages) so it has a third parameter passed to it as well as the author and title;
this parameter is used - obviously?? - to initialise the number of pages.
Note: This is easiest done by making a copy of the existing Constructor and adding the parameter.
Add a getPages() accessor method that returns the number of pages in the book.
Add a method printDetails() to your Book class. This should print out the Author title and number of pages to the Terminal Window. It is your choice as to how the data is formatted, perhaps all on one line, perhaps on three, and with or without explanatory text. For instance you could print out in the format:
Title: Robinson Crusoe, Author: Daniel Defoe, Pages:226
Add a further instance variable/field refNumber() to your Book class. This stores the Library's reference number. It should be of type String and be initialised to the empty String "" in the constructor, as its initial value is not passed in as a parameter. Instead a public mutator method with the signature:
public void setRefNumber(String ref) should be created. The body of this method should assign the value of the method parameter ref to the refNumber.
Add a corresponding getRefNumber() accessor method to your class so you can check that the mutator works correctly
Modify your printDetails() method to include printing the reference number of the book.
However the method should print the reference number only if it has been set - that is the refNumber has a non-zero length.
If it has not been set, print "ZZZ" instead.
Hint Use a conditional statement whose test calls the length() method of the refNumber String and gives a result like:
Title: Jane Eyre, Author: Charlotte Bronte, Pages:226, RefNo: CB479 or, if the reference number is not set:
Title: Robinson Crusoe, Author: Daniel Defoe, Pages:347, RefNo: ZZZ
Modify your setRefNumber() method so that it sets the refNumber field only if the parameter is a string of at least three characters. If it is less than three, then print an error message (which must contain the word error) and leave the field unchanged
Add a further integer variable/field borrowed to the Book class, to keep a count of the number of times a book has been borrowed. It should (obviously??) be set to 0 in the constructor.
Add a mutator method borrow() to the class. This should increment (add 1 to) the value of borrowed each time it is called.
Include an accessor method getBorrowed() that returns the value of borrowed
Modify Print Details so that it includes the value of the borrowed field along with some explanatory text
PS. sorry it looks so messey

1. In the future, please use a more meaningful subject. "Help needed with java" contains no information. The very fact that you're posting here tells us you need help with Java. The point of the subject is to give the forum an idea of what kind of problem you're having, so that individuals can decide if they're interested and qualified to help.
2. You need to ask a specific question. If you have no idea where to start, then start here: [http://home.earthlink.net/~patricia_shanahan/beginner.html]
3. When you post code, use code tags. Copy the code from the original source in your editor (NOT from an earlier post here, where it will already have lost all formatting), paste it in here, highlight it, and click the CODE button.

Help needed with Media Manager

Similar Messages

Maybe you are looking for