Help needed with my new GTX 770 4GB OC card settings

Hello everyone,
I'm new to this forum so excuse me if this subject already been bought up,
i have recently got the msi twin frozr gtx 770 4gb oc edition,and I'm not happy at all , as the box did not come with a manual on how to get the oc mode active etc,
the software cd that came with it has a gaming app + msi afterburner so i have installed everything, and i open the gaming app, it gives me a silent mode + gameing mode + oc mode, so i click oc mode for example and all it gives me is 1254MHz so i run afterburner i see that my temps reaches 50c + and i try to control the fan speed of my card but the gaming mode doesn't allow it to adjust to 100 % fan speed , anyway enough said let me go to the main part, i have got the kombustor running and done some tests, i found out that i have been getting low fps with the 1254MHz and my voltage clock is 1.2v ... i used to have a gtx560ti and the gtx770 fps is the same as my old card this is jokes , now i wished i didn't even buy the gtx770 its expensive for nothing,
and the thing that makes me is that msi didn't put any info manual in the box apart of how to install your graphics on the motherboard,
by the way my PC specs are:
I7 4770K @ 4ghz
16gb corsair ram @ 1600
TX850 corsair power supply
i have the latest graphics drivers installed , got it from nvidia website (327.23) for the gtx770
by the way the kombuster score i was getting was 190 fps
with physx on, and no anti aliasing,
here's my picture of the clocks I'm getting currently
could anyone out there that have the same card is mine confirm that my card is normal ?
or is there something i need to download or get to make my fps stable as it should be for this card ?
oh and i forgot to tell you that my friend has also recently got this card and is also stuck,
hes got lower mhz than mine and lower voltages like 1.8v or something
I'm sure that theres something that we haven't done to get the best out of this graphics card
its one of the best graphics card out there,
anyway enough of writing up an essay waiting for someone to help me out
many thanks in advance
Regards

the memory clock is right as its GDDR (Graphics Double Data Rate) so it has to be doubled making it 3506 x 2 (3506+3506) total of 7012Mhz (advertised GDDR5 7010MHz Memory)
as for you low FPS its more then likely a driver problem as nearly all GTX 770's are having issues and reporting low FPS you could try other drivers from Nvidia's like the lower ones or the newer Beta Driver 331.40 and see if it makes any difference!

Similar Messages

Help needed with very new imac G5 user

ok a friend of mine who owns a imac G5 seems to be having some bother as of late as since he has no net access just now im posting for him......basically its this......
when he starts up his machine all is well right up to choosing the user, both he and his sister use the G5 accept when you choose which user wants to use the machine the password is accepted but then he gets a black screen with this displayed
Darwin /BSD (Macintosh. local) (console)
login:
ive tried his usernames and passes on this screen but nothing seems to work.
i'd apreciate as much help as possible as i said i'd get back to him tomorrow.
thx in advance everyone

Hi mugs001-
Greetings and welcome to the Apple boards.
Try resetting the password as described in this document: Mac OS X: Changing or resetting an account password.
Luck-
-DaddyPaycheck

Help needed with cc new subscription

i've bought cs3 design premium and ugraded it to cs5 production premium and now i'm interested in buying a subscription to cc so i can use the cc suite
when i'm trying to buy the subscription using any of the 2 serial numbers i'm getting the message that i'm not eligible for the offer
i even tried to register my products through the help menu from photoshop and premiere and my profile page doesnt update
i dont know what else to do
any help will be much appreciated

Hi Kostakisan,
This is an issue which will require contacting our customer service
Please contact them at:
http://www.adobe.com/support/download-install/supportinfo/
-Dave

MSI Twin Frozr Gtx 770 4gb uefi bios

Hey guys.
First time posting here.
Does my graphics card come with a uefi bios? If not, how do I get one and how do I flash it? I'm experiencing black screen hangups on startup, on a new build and people say a bios flash may be the solution.
Thanks.
My current bios: ht tp://ww w.2sh ared.co m/file/qpo5L9 My/GK104.ht ml
please delete spaces (says I'm not allowed to post external links, sorry)

A few weeks ago, I built my own pc and installed Windows 8.1. I've installed just basic drivers from vendors websites and avast, malwarebytes, some benchmarking utilities and games. I'm getting really sluggish startup speeds, and my pc stops at a black screen after the windows logo but before the logo. The way I would describe the black screen is, it happens after the windows logo but before the welcome screen - a black screen from 8-15 seconds. I cannot move my cursor or see anything. Some research from the likes of eightforums etc suggests its my gpu drivers, so I decided to post here.
What I've tried:
Reinstalled video card drivers to see if it stops black screening
Full virus scan
Made startup programs and services minimal
Checked event viewer for anything peculiar - nothing came up, besides a driver related to my asus motherboard - AMDA00 Interface. I have since disabled it, as its not needed. Still no difference.
Reinstalled windows 8.1. Still the same.
When I boot in safe mode, I also get the "hanging" black screen, although it doesn't last as long.
My specs:
CPU: Intel i5 4670K (Stock Speeds)
Motherboard: Asus Maximus VII Ranger
RAM: Corsair Vengeance LP - 2x4GB @ 1866Mhz
GPU: MSI Twin Frozr GTX 770 4GB - CPU Cooler: Be Quiet! Dark Rock Pro 3 CPU Cooler
PSU: EVGA SuperNova G2 750W
Storage: Seagate Barracuda 2TB HDD
Case: Fractal Design Define R4 Windowed (with Red AKASA Led Strips)
Display: Benq GL2460HM 24" Monitor
Keyboard/Mouse: Basic sumvision keyboard and tecknet mouse - both USB. No other peripherals connected.
Any help is appreciated and feel free to ask for any more info.
Thanks

MSI GTX 770 4Gb/DDR5 OC GPU usage is 0%

Hi Guys,
I've noticed that when I'm using the "MSI Game App" for OC my GTX770 to game mode or OC mode,
when benchmarking the card with "MSI Kombustor" I see that the GPU load stays at 0% all the time (using the MSI Afterburner SW).
Only when I'm switching the "MSI game App" to Normal mode, or shutting it down it completely and performing Benchmark tests again, the GPU load is rising up to 97%-99% usage.
Using the MSI Afterburner for monitoring the sensors, shows the same results in all scenarios - I can see the core temperature is climbing, but the GPU load stays at 0% all the time .
I'm using:
The latest NVIDIA GTX 770 drivers (331.82 & tried also 331.93),
The latest MSI game app (v1.0.0.13),
The latest MSI Afterburner Version 2.3.1 & Kombustor.
Mother Board: GIGABYTE GA-X58A-UD3R (rev 2)
Video Card: MSI GTX 770 4Gb/DDR5 OC
Power supply: Corsair RM750.
Any clue how to solve this problem will be much appreciated
Moreover - Can someone please tell me what benchmark score is considered as a good score for this HW setup (using the MSI Kombustor)?
Thanks in advance and a Happy new year to everyone,
SunShy

Quote from: flobelix on 01-January-14, 22:00:00
The issue is no issue. The Gaming APP blocks usage reading to prevent boost 2.0 to throttle at low usage to have a relatively stable oc clockrate (to have best benchmark results). Don't use the Gaming APP and use Afterburner for overclocking and usage monitoring will work fine.
Thank you flobelix!

HELP NEEDED WITH ADDAPTER-DVI TO VGA.

PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE...
......THIS ENSURES NO SMOKE!!!
THE CARD IS AN ATI RADEON RX9250-DUAL HEAD-.........ADDAPTER IS DVI(ANALOG)MALE TO VGA(ANALOG)FEMALE.
ANY HELP VERY MUCH APPRECIATED........ SEEMS YOU NEED TO BE ROCKET SCI TO ATTACH A BLOODY PICTURE...SO THIS HAS BEEN BIG WASTE OF FING TIME!

Quote from: BOBHIGH on 17-December-05, 09:21:31
Get over it mate !
I find it easy t read CAPS...and if you dont like it ...DONT READ IT!
And why bother to reply...some people have nothing better to do.
Yes there chep and easy to come by...Ive already got a new one.
All I wanted was to make a diagram of whats inside the bloody thing...it was a simple question and required a simple answer.
NO NEED TO A WANKA !!
I feel a bann comming up.
Have you tryed Google ? really.. your question is inrelevant. No need to reply indeed.
Why do you come here asking this question anyway ? is it becouse you have a MSI gfx card ? and the adapter has nothing to do with this ?
You think you can come in here yelling.. thinking we have to put up with it and accept your style of posting. This is not a MSI tech center.. it's a user to user center.. Your question has nothing to do with MSI relavant things anyway's.
Google = your friend.
Quote from: BOBHIGH on 17-December-05, 09:21:31
it was a simple question and required a simple answer
Simple for who ? you (buying a new one) ? me ? we ? .really...........
Quote from: Dynamike on 16-December-05, 04:11:48
1: There are allot of diffrent types of those adapters.
If any of the mods have a problem about my reply.. please pm me.

Help needed with this form in DW

Hi, i have created this form in dreamweaver but ive got this problem.
In the fields above the text field, the client needs to fill in some info such as name, email telephone number etc.
But the problem is when ill get the messages. Only the text from the large text field is there.
What did i do wrong??
http://www.hureninparamaribo.nl/contact.html
Thank you
Anybody??

Thank you for your response. So what do i have to do to fix this?
Date: Sun, 20 Jan 2013 07:57:56 -0700
From: [email protected]
To: [email protected]
Subject: Help needed with this form in DW
    Re: Help needed with this form in DW
    created by Ken Binney in Dreamweaver General - View the full discussion
You have several duplicate "name" attributes in these rows which also appears in the first row
Telefoon:
Huurperiode:
Aantal personen:
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5008247#5008247
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5008247#5008247
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5008247#5008247. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver General by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Help needed with header and upload onto business catalyst

Can someone help with a problem over a header please?
I have inserted a rectangle with a jpeg image in background, in the 'header' section, underneath the menu. It comes up fine on most pages when previsualised, going right to the side of the screen, but stops just before the edge on certain pages. I have double checked that I have placed it in the right place in relation to the guides on the page.
That's one problem.
The second problem is that I tried to upload onto business catalyst, which got to 60% and refused to go any further, saying it couldn't find the header picture, giving the title and then u4833-3.fr.png. The picture is in the right folder I have double checked. And it isn't a png. Does it have to be ?
And the third problem is that I got an email following my upload from business catalyst in Swedish. I am living in France.
Can anyone help ? Thanks.

Thanks for replying,
How can I check the preview in other browsers before I publish a provisional site with BC?
The rectangle width issue happens on certain pages but not others. The Welecom page is fine when the menu is active, also the contact page, but others are slightly too narrow. Changing the menu spacing doesn’t help - I was already on uniform but tried changing to regular and back.
In design mode the rectangle is set to the edge of the browser, that’s 100%browser width right?
Re BC I have about 200 images on 24 different pages and it seems to be having difficulty uploading some of them. But it has managed a couple I named with spaces but not others I named with just one name.
Is there an issue on size of pictures ? If I need to replace is there a quick way to rename and relink or do I have to insert the photos all over again?
I’m a novice with Muse with an ambitious site !
Thanks for your help.
Mary Featherstone
Envoyé depuis Courrier Windows
De : Sanjit_Das
Envoyé : vendredi 14 février 2014 22:15
À : MFeatherstone
Re: Help needed with header and upload onto business catalyst
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Hi
Answering the questions :
- Have you checked the preview in Muse and also in other browsers ?
- Does the rectangle width issue happens when menu is active , or in any specific state , Try to change the menu with uniform spacing and then check.
- In design view the rectangle is set to 100% browser width ?
With publishing :
- Please try to rename the image file and then relink
- If it happens with other images as well , see if all the image names includes strange characters or spaces.
- Try again to publish
With e-mail from BC :
- Under preferences , please check the country selected.
- If you have previously created partner account in BC and selected country and language then it would follow that, please check that.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6121942#6121942
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6121942#6121942
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6121942#6121942. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Help needed with a design!

HELP! I need help with designing something!
IMAGE on this link " http://i1072.photobucket.com/albums/w362/jjnilsson/DSC_0188.jpg "
i need this patch on the picture to be "remade" in higher definition and the text should be MILF HUNTERS intstead of milf hunter... Anyone that might be able to help me out?
reson for all this is that its gonna be made to a 30x40cm big patch fitting the back of our Team jackets!
send me a pm or a mail ([email protected]) if you need any futher info or if you can help me out! I am really thankful for all the help i can get!
With best regards J. Nilsson, Milf Hunters Mc

I simply did as i got a tip on FB to do
quote from adobe themselves on facebook "Adobe Illustrator You might also want to try asking on our forums as there are many people that can help there as well! http://forums.adobe.com/community/illustrator/illustrator_general"
sry if it was wrong of me, simply thought there might be someone nice out there to give a helping hand
Date: Tue, 5 Jun 2012 13:41:48 -0600
From: [email protected]
To: [email protected]
Subject: Help needed with a design!
    Re: Help needed with a design!
    created by in Illustrator - View the full discussion
This really isn't the place to ask for free services.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4467790#4467790
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4467790#4467790. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Illustrator by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Help needed with java

Hello everyone
I'm a Student and new to java and I have been given a question which I have to go through. I have come across a problem with one of the questions and am stuck, so I was wondering if you guys could help me out.
here is my code so far:
A Class that maintains Information about a book
This might form part of a larger application such
as a library system, for example.
@author (your name)
*@version (a version number or a date)*
public class Book
// instance variables or fields
private String author;
private String title;
Set the author and title when the book object is constructed
public Book(String bookAuthor, String bookTitle)
author = bookAuthor;
title = bookTitle;
Return The name of the author.
public String getAuthor()
return author;
Return The name of the title.
public String getTitle()
return title;
and below are the questions that I need to complete. they just want me to add codes to my current one, but the problem is I don't know where to put them and how I should word them, if that makes sense.
Add a further instance variable/field pages to the Book class to store the number of pages in the book.
This should be of type int and should be set to 0 in the Constructor.
Add a second Constructor with signature
public Book(String bookAuthor, String bookTitle, int noPages) so it has a third parameter passed to it as well as the author and title;
this parameter is used - obviously?? - to initialise the number of pages.
Note: This is easiest done by making a copy of the existing Constructor and adding the parameter.
Add a getPages() accessor method that returns the number of pages in the book.
Add a method printDetails() to your Book class. This should print out the Author title and number of pages to the Terminal Window. It is your choice as to how the data is formatted, perhaps all on one line, perhaps on three, and with or without explanatory text. For instance you could print out in the format:
Title: Robinson Crusoe, Author: Daniel Defoe, Pages:226
Add a further instance variable/field refNumber() to your Book class. This stores the Library's reference number. It should be of type String and be initialised to the empty String "" in the constructor, as its initial value is not passed in as a parameter. Instead a public mutator method with the signature:
public void setRefNumber(String ref) should be created. The body of this method should assign the value of the method parameter ref to the refNumber.
Add a corresponding getRefNumber() accessor method to your class so you can check that the mutator works correctly
Modify your printDetails() method to include printing the reference number of the book.
However the method should print the reference number only if it has been set - that is the refNumber has a non-zero length.
If it has not been set, print "ZZZ" instead.
Hint Use a conditional statement whose test calls the length() method of the refNumber String and gives a result like:
Title: Jane Eyre, Author: Charlotte Bronte, Pages:226, RefNo: CB479 or, if the reference number is not set:
Title: Robinson Crusoe, Author: Daniel Defoe, Pages:347, RefNo: ZZZ
Modify your setRefNumber() method so that it sets the refNumber field only if the parameter is a string of at least three characters. If it is less than three, then print an error message (which must contain the word error) and leave the field unchanged
Add a further integer variable/field borrowed to the Book class, to keep a count of the number of times a book has been borrowed. It should (obviously??) be set to 0 in the constructor.
Add a mutator method borrow() to the class. This should increment (add 1 to) the value of borrowed each time it is called.
Include an accessor method getBorrowed() that returns the value of borrowed
Modify Print Details so that it includes the value of the borrowed field along with some explanatory text
PS. sorry it looks so messey

1. In the future, please use a more meaningful subject. "Help needed with java" contains no information. The very fact that you're posting here tells us you need help with Java. The point of the subject is to give the forum an idea of what kind of problem you're having, so that individuals can decide if they're interested and qualified to help.
2. You need to ask a specific question. If you have no idea where to start, then start here: [http://home.earthlink.net/~patricia_shanahan/beginner.html]
3. When you post code, use code tags. Copy the code from the original source in your editor (NOT from an earlier post here, where it will already have lost all formatting), paste it in here, highlight it, and click the CODE button.

Help needed with Report Design

Hi All,
Here is the requirement.
Period Type(holds 2 values) : Payment and Vested.
we have field 'Total Days' which is calculated based on "User Selected" Period Type.
For example, When Period Type is Payment,
If start date is less than or equal to grant date and end date is less than or equal to vest date, then calculation is (End Date - Grant Date)+1
If start date is greater than grant date and end date is less than or equal to vest date, then calculation is (End Date - Mobility Start Date)+1 (similarly 2 more if conditions) ...we have similar calculation for Period Type - 'Vested'.
This Period Type is a multiselect Prompt. How can this be achievable.
Any thoughts will be greatly appreciated.
Thanks.

I simply did as i got a tip on FB to do
quote from adobe themselves on facebook "Adobe Illustrator You might also want to try asking on our forums as there are many people that can help there as well! http://forums.adobe.com/community/illustrator/illustrator_general"
sry if it was wrong of me, simply thought there might be someone nice out there to give a helping hand
Date: Tue, 5 Jun 2012 13:41:48 -0600
From: [email protected]
To: [email protected]
Subject: Help needed with a design!
    Re: Help needed with a design!
    created by in Illustrator - View the full discussion
This really isn't the place to ask for free services.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4467790#4467790
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4467790#4467790. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Illustrator by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Help needed with breadcrums???

Hi thank you for reading,
On my site
http://www.dorff.nl/huize%20beekhuizen.html
you will see a nice page. On this page ive got no complaints.
Alle the text and images are looking good. But to have this i had to change the settings of the breadcrums.
Now all my other pages look like this..
file:///C:/Users/Gast%20Account/Desktop/vakantiehuizensuriname%20website/appartement%20she rida.html
As you can see there is too much space between the text and the photos. it seems i cant do one page without effecting an other.
Need some help to figure this out.
Regards Brian

all spaces are removed..
here is the link..
http://www.dorff.nl/appartementsherida.html
Regards Brian
Date: Thu, 26 Apr 2012 12:26:58 -0600
From: [email protected]
To: [email protected]
Subject: Help needed with breadcrums???
    Re: Help needed with breadcrums???
    created by Ken Binney in Dreamweaver - View the full discussion
Hi Brian - Please remove spaces from all file and folder names. Use a hyphen or underscorehuize%20beekhuizen.html Please put sherida.html online and post a link for us
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4363367#4363367
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4363367#4363367. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

New GTX 770 freezes/crashes

Just bought a new GTX 770 popped in it and installed the drivers. Before I installed the drivers everything was running smooth. After I installed the latest drivers I keep getting freezes and crashes. Freezes last about 1 minute and then my machine just turns off. I tried previous versions and still getting freezes and crashes.
Running Win 8.1
10 gigs RAM
i5 3570
Rosewill RD700 700w

Quote from: Nichrome on 30-September-14, 01:49:55
Not quite throwing down on a PSU. It's almost most important part in the PC (#1 is motherboard) so this could've been a bit better choice.
I suggest you speak to a friend/colleague and ask if you can test your card in their PC (as long as their PSU is of some better brand, or at least known to work with higher end GPU).
At last, I recommend Corsair and Seasonic's power supplies. Proven to work really well. From Corsair CX, RM and AXi series are best in my opinion.
Ah I see. Yeah my current PSU was a gift from a friend and it worked great with my 7850 which I upgraded from. I just meant that I didn't want to buy a whole new PSU if that wasn't the problem. I'll definitely take a look at the ones suggested.
I appreciate the replies.
Here goes nothin.

Help needed with Vista 64 Ultimate

"Help needed with Vista 64 UltimateI I need some help in getting XFI Dolby digital to work
Okay so i went out and I bought a yamaha 630BL reciever, a digital coaxial s/pdif, and a 3.5mm phono plug to fit perfectly to my XFI Extreme Music
-The audio plays fine and reports as a PCM stream when I play it normally, but I can't get dolby digital or DTS to enable for some reason eventhough I bought the DDL & DTS Connect Pack for $4.72
When I click dolby digital li've in DDL it jumps back up to off and has this [The operation was unsuccessful. Please try again or reinstall the application].
Message Edited by Fuzion64 on 03-06-2009 05:33 AMS/PDIF I/O was enabled under speakers in control panel/sound, but S/PDIF Out function was totally disabled
once I set this to enabled Dolby and DTS went acti've.
I also have a question on 5. and Vista 64
-When I game I normally use headphones in game mode or 2. with my headphones, the reason for this is if I set it on 5. I get sounds coming out of all of the wrong channels.
Now when I watch movies or listen to music I switch to 5. sound in entertainment mode, but to make this work properly I have to open CMSS-3D. I then change it from xpand to stereo and put the slider at even center for 50%. If I use the default xpand mode the audio is way off coming out of all of the wrong channels.
How do I make 5. render properly on vista

We ended up getting iTunes cleanly uninstalled and were able to re-install without issue. All is now mostly well.
Peace...

Help needed with itunes

help needed with itunes please tryed to move my itunes libary to my external hard drive itunes move ok and runs fin but i have none of my music or apps or anything all my stuff is in the itunes folder on my external hard drive but there is nothing on ituns how do i get it back help,please

(Make sure the Music (top left) library is selected before beginning this.)
If you have bad song links in your library, hilite them and hit the delete button. Then locate the folder(s) where your music is located and drag and drop into the large library window in iTunes ( where your tracks show up). This will force the tunes into iTunes. Before you start, check your preferences in iTunes specifically under the"Advanced" tab, general settings. I prefer that the 1st 2 boxes are unchecked. (Keep iTunes Music folder organized & Copy files to iTunes Music folder when adding to library). They are designed to let iTunes manage your library. I prefer to manage it myself. Suit yourself. If there is a way for iTunes to restore broken links other than locating one song at a time I haven't found it yet. (I wish Apple would fix this, as I have used that feature in other apps.) This is the way I do it and I have approx. 25,000 songs and podcasts and videos at present. Hope this helps.

Help needed with my new GTX 770 4GB OC card settings

Similar Messages

Maybe you are looking for