Help! needed with new mac

Just got a new iMac today. Got it all set up and was running great, but somehow I couldn't remember my administrator password. Followed directions to reset it via the install disk. After I did this, now computer wont restart. It just goes to white sceen with wheel turning below apple logo. I have tried to reboot by powering up while holding down option key. Then clicking on hard drive symbol that pops up...but still nothing. Now the last time I tried it, when computer restarted, it made a funny audio tone before the normal start up sound. Any ideas?

Go up to the menu bar and select Utilities!
For repair:
http://kb.wisc.edu/helpdesk/page.php?id=3810
For setting new password choose Reset Password:
http://docs.info.apple.com/article.html?artnum=306508

Similar Messages

Advise needed with New Mac OS releases.

Hi,
I'm new to the Mac world, and having a lot of difficulty follow these posts to try and fix the many problems I have encountered since upgrading to SL. Is SL a typical release for Mac? It seems I should have waited for more fix releases, to be available before upgrading, but the conversion from my PC to my Macbook in July went so well and Leopard was operating flawlessly for my needs that I just went ahead and upgraded to SL.
What now, how long before Apple will fix all these problems. This is worse, at least, for me then when I upgraded from XP to Vista, which for a lot of PC users at the time was a disaster. I fell back to XP and and never returned to Vista. I eventualy bought my MacBook instead, and now I'm in a similar situation with no experience...
Because of my inexperience with the Mac system I'm afraid to try and fall back to Leopard and risk making my situation even worse. What if Time Machine fails to get back all my data
after Clean install of Leopard.
Any advise will be so much appreciated. With all the experience out there I'm trying to get a feeling of is it best to stay with SL a wait for the fixes, or chance going back to Leopard, until a stable better functioning version of SL is available. For a while there I thought all my computer problem were behind me as my Mac and leopard were working so reliably, and smoothly. I guess being an early adopter of any new OS is not a good thing unless there is some real need, which there was not in my case.

HI,
*"For a while there I thought all my computer problem were behind me as my Mac and leopard were working so reliably, and smoothly."*
It's difficult to help you if you don't tell us exactly what's happening.
Yes, Snow Leopard is an upgrade from Leopard. 10.5 to 10.6
One thing to keep in mind. If you download and install updates as they become available, they won't necessarily include the patches or fixes for problems you are encountering. The Software Update window will have the links available for the updates so you can read the documentation before installing.
This is the docs for the 10.6.1 update.
http://support.apple.com/kb/HT3810
http://support.apple.com/kb/HT1222
If you could reply and provide details to the problem you are having, then we can try and help.
Carolyn

Since installing Firefox 4 I cannot install addons - help needed with new browser please

Have tried to install add-ons, and whilst they appear to have installed nothing is added to the tools add-ons button.

This can be caused if one of the files that stores details of installed extensions is corrupt.
# Open your profile folder, for details of how to find it see https://support.mozilla.com/kb/Profiles
# Close Firefox
# Delete the following files if they exist, extensions.cache, extensions.rdf, extensions.ini and extensions.sqlite
# Re-start Firefox, it will then rebuild the list on installed extensions

I just purchase a brand new mac computer and I need to purchase new adobe CS software. Do you know if Adobe CS5 Design Premium-MAc is compatible with new mac computers with the updated software?

I just purchase a brand new mac computer and I need to purchase new adobe CS software for work. Do you know if Adobe CS5 Design Premium-Mac is compatible with new mac computers with the updated Yosemite software? *No previous adobe CS software versions are on this computer

There are known technical issues with any older version on Yosemite, even CS6. Some can be worked out, others may not be relevant to you, some will remain unsolved.
Mylenium

Need wireless monochrome laser printer for home office to use with new mac book pro with retina display. I also have to have networking capability. Suggestions for economic printers?

HI, I need to buy an economic monochrome laser that will work wirelessly with new Mac Book Pro with Retina Display inmy home office. Any suggestions? I was considering the HP 1102W or Brothers HL22700W but have heard that they do not work with Mac 10.6.1 or upgrade. Need to try to get his done asap so I will appreciate any and all feedback!

http://www.shopping.hp.com/en_US/home-office/-/products/Printers/Printers

Hello.Can anyone help me with my mac? I typed a note on my mac.When i finished it, i click new note button.Then my note is lost.Help me, please!

ello.Can anyone help me with my mac? I typed a note on my mac.When i finished it, i click new note button.Then my note is lost.Help me, please!

Does your note pad look like this?
The left column shows a list of all my notes. Do you have something else?

And need the new iTunes 11.1 to be able to use my iPhone on iTunes but I need the new mac software update OXS 10.6.8, but my mac doesn't need or have an update what should I do! I'm upset :'(

and need the new iTunes 11.1 to be able to use my iPhone on iTunes but I need the new mac software update OXS 10.6.8, but my mac doesn't need or have an update what should I do! I'm upset :'(

The requirements for iTunes:
Macintosh System Requirements
Mac computer with an Intel Core processor
OS X version 10.6.8 or later
400MB of available disk space
Broadband Internet connection to use the iTunes Store
Your Mac must be able to run OSX 10.6.8. If you can run that OSX then you can run iTunes 11.1.
Which Mac do you have?
MJ

HELP NEEDED WITH ADDAPTER-DVI TO VGA.

PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE...
......THIS ENSURES NO SMOKE!!!
THE CARD IS AN ATI RADEON RX9250-DUAL HEAD-.........ADDAPTER IS DVI(ANALOG)MALE TO VGA(ANALOG)FEMALE.
ANY HELP VERY MUCH APPRECIATED........ SEEMS YOU NEED TO BE ROCKET SCI TO ATTACH A BLOODY PICTURE...SO THIS HAS BEEN BIG WASTE OF FING TIME!

Quote from: BOBHIGH on 17-December-05, 09:21:31
Get over it mate !
I find it easy t read CAPS...and if you dont like it ...DONT READ IT!
And why bother to reply...some people have nothing better to do.
Yes there chep and easy to come by...Ive already got a new one.
All I wanted was to make a diagram of whats inside the bloody thing...it was a simple question and required a simple answer.
NO NEED TO A WANKA !!
I feel a bann comming up.
Have you tryed Google ? really.. your question is inrelevant. No need to reply indeed.
Why do you come here asking this question anyway ? is it becouse you have a MSI gfx card ? and the adapter has nothing to do with this ?
You think you can come in here yelling.. thinking we have to put up with it and accept your style of posting. This is not a MSI tech center.. it's a user to user center.. Your question has nothing to do with MSI relavant things anyway's.
Google = your friend.
Quote from: BOBHIGH on 17-December-05, 09:21:31
it was a simple question and required a simple answer
Simple for who ? you (buying a new one) ? me ? we ? .really...........
Quote from: Dynamike on 16-December-05, 04:11:48
1: There are allot of diffrent types of those adapters.
If any of the mods have a problem about my reply.. please pm me.

Help needed with this form in DW

Hi, i have created this form in dreamweaver but ive got this problem.
In the fields above the text field, the client needs to fill in some info such as name, email telephone number etc.
But the problem is when ill get the messages. Only the text from the large text field is there.
What did i do wrong??
http://www.hureninparamaribo.nl/contact.html
Thank you
Anybody??

Thank you for your response. So what do i have to do to fix this?
Date: Sun, 20 Jan 2013 07:57:56 -0700
From: [email protected]
To: [email protected]
Subject: Help needed with this form in DW
    Re: Help needed with this form in DW
    created by Ken Binney in Dreamweaver General - View the full discussion
You have several duplicate "name" attributes in these rows which also appears in the first row
Telefoon:
Huurperiode:
Aantal personen:
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5008247#5008247
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5008247#5008247
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5008247#5008247. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver General by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Help needed with header and upload onto business catalyst

Can someone help with a problem over a header please?
I have inserted a rectangle with a jpeg image in background, in the 'header' section, underneath the menu. It comes up fine on most pages when previsualised, going right to the side of the screen, but stops just before the edge on certain pages. I have double checked that I have placed it in the right place in relation to the guides on the page.
That's one problem.
The second problem is that I tried to upload onto business catalyst, which got to 60% and refused to go any further, saying it couldn't find the header picture, giving the title and then u4833-3.fr.png. The picture is in the right folder I have double checked. And it isn't a png. Does it have to be ?
And the third problem is that I got an email following my upload from business catalyst in Swedish. I am living in France.
Can anyone help ? Thanks.

Thanks for replying,
How can I check the preview in other browsers before I publish a provisional site with BC?
The rectangle width issue happens on certain pages but not others. The Welecom page is fine when the menu is active, also the contact page, but others are slightly too narrow. Changing the menu spacing doesn’t help - I was already on uniform but tried changing to regular and back.
In design mode the rectangle is set to the edge of the browser, that’s 100%browser width right?
Re BC I have about 200 images on 24 different pages and it seems to be having difficulty uploading some of them. But it has managed a couple I named with spaces but not others I named with just one name.
Is there an issue on size of pictures ? If I need to replace is there a quick way to rename and relink or do I have to insert the photos all over again?
I’m a novice with Muse with an ambitious site !
Thanks for your help.
Mary Featherstone
Envoyé depuis Courrier Windows
De : Sanjit_Das
Envoyé : vendredi 14 février 2014 22:15
À : MFeatherstone
Re: Help needed with header and upload onto business catalyst
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Hi
Answering the questions :
- Have you checked the preview in Muse and also in other browsers ?
- Does the rectangle width issue happens when menu is active , or in any specific state , Try to change the menu with uniform spacing and then check.
- In design view the rectangle is set to 100% browser width ?
With publishing :
- Please try to rename the image file and then relink
- If it happens with other images as well , see if all the image names includes strange characters or spaces.
- Try again to publish
With e-mail from BC :
- Under preferences , please check the country selected.
- If you have previously created partner account in BC and selected country and language then it would follow that, please check that.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6121942#6121942
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6121942#6121942
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6121942#6121942. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Help needed with a design!

HELP! I need help with designing something!
IMAGE on this link " http://i1072.photobucket.com/albums/w362/jjnilsson/DSC_0188.jpg "
i need this patch on the picture to be "remade" in higher definition and the text should be MILF HUNTERS intstead of milf hunter... Anyone that might be able to help me out?
reson for all this is that its gonna be made to a 30x40cm big patch fitting the back of our Team jackets!
send me a pm or a mail ([email protected]) if you need any futher info or if you can help me out! I am really thankful for all the help i can get!
With best regards J. Nilsson, Milf Hunters Mc

I simply did as i got a tip on FB to do
quote from adobe themselves on facebook "Adobe Illustrator You might also want to try asking on our forums as there are many people that can help there as well! http://forums.adobe.com/community/illustrator/illustrator_general"
sry if it was wrong of me, simply thought there might be someone nice out there to give a helping hand
Date: Tue, 5 Jun 2012 13:41:48 -0600
From: [email protected]
To: [email protected]
Subject: Help needed with a design!
    Re: Help needed with a design!
    created by in Illustrator - View the full discussion
This really isn't the place to ask for free services.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4467790#4467790
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4467790#4467790. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Illustrator by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Help needed with java

Hello everyone
I'm a Student and new to java and I have been given a question which I have to go through. I have come across a problem with one of the questions and am stuck, so I was wondering if you guys could help me out.
here is my code so far:
A Class that maintains Information about a book
This might form part of a larger application such
as a library system, for example.
@author (your name)
*@version (a version number or a date)*
public class Book
// instance variables or fields
private String author;
private String title;
Set the author and title when the book object is constructed
public Book(String bookAuthor, String bookTitle)
author = bookAuthor;
title = bookTitle;
Return The name of the author.
public String getAuthor()
return author;
Return The name of the title.
public String getTitle()
return title;
and below are the questions that I need to complete. they just want me to add codes to my current one, but the problem is I don't know where to put them and how I should word them, if that makes sense.
Add a further instance variable/field pages to the Book class to store the number of pages in the book.
This should be of type int and should be set to 0 in the Constructor.
Add a second Constructor with signature
public Book(String bookAuthor, String bookTitle, int noPages) so it has a third parameter passed to it as well as the author and title;
this parameter is used - obviously?? - to initialise the number of pages.
Note: This is easiest done by making a copy of the existing Constructor and adding the parameter.
Add a getPages() accessor method that returns the number of pages in the book.
Add a method printDetails() to your Book class. This should print out the Author title and number of pages to the Terminal Window. It is your choice as to how the data is formatted, perhaps all on one line, perhaps on three, and with or without explanatory text. For instance you could print out in the format:
Title: Robinson Crusoe, Author: Daniel Defoe, Pages:226
Add a further instance variable/field refNumber() to your Book class. This stores the Library's reference number. It should be of type String and be initialised to the empty String "" in the constructor, as its initial value is not passed in as a parameter. Instead a public mutator method with the signature:
public void setRefNumber(String ref) should be created. The body of this method should assign the value of the method parameter ref to the refNumber.
Add a corresponding getRefNumber() accessor method to your class so you can check that the mutator works correctly
Modify your printDetails() method to include printing the reference number of the book.
However the method should print the reference number only if it has been set - that is the refNumber has a non-zero length.
If it has not been set, print "ZZZ" instead.
Hint Use a conditional statement whose test calls the length() method of the refNumber String and gives a result like:
Title: Jane Eyre, Author: Charlotte Bronte, Pages:226, RefNo: CB479 or, if the reference number is not set:
Title: Robinson Crusoe, Author: Daniel Defoe, Pages:347, RefNo: ZZZ
Modify your setRefNumber() method so that it sets the refNumber field only if the parameter is a string of at least three characters. If it is less than three, then print an error message (which must contain the word error) and leave the field unchanged
Add a further integer variable/field borrowed to the Book class, to keep a count of the number of times a book has been borrowed. It should (obviously??) be set to 0 in the constructor.
Add a mutator method borrow() to the class. This should increment (add 1 to) the value of borrowed each time it is called.
Include an accessor method getBorrowed() that returns the value of borrowed
Modify Print Details so that it includes the value of the borrowed field along with some explanatory text
PS. sorry it looks so messey

1. In the future, please use a more meaningful subject. "Help needed with java" contains no information. The very fact that you're posting here tells us you need help with Java. The point of the subject is to give the forum an idea of what kind of problem you're having, so that individuals can decide if they're interested and qualified to help.
2. You need to ask a specific question. If you have no idea where to start, then start here: [http://home.earthlink.net/~patricia_shanahan/beginner.html]
3. When you post code, use code tags. Copy the code from the original source in your editor (NOT from an earlier post here, where it will already have lost all formatting), paste it in here, highlight it, and click the CODE button.

Help needed with Report Design

Hi All,
Here is the requirement.
Period Type(holds 2 values) : Payment and Vested.
we have field 'Total Days' which is calculated based on "User Selected" Period Type.
For example, When Period Type is Payment,
If start date is less than or equal to grant date and end date is less than or equal to vest date, then calculation is (End Date - Grant Date)+1
If start date is greater than grant date and end date is less than or equal to vest date, then calculation is (End Date - Mobility Start Date)+1 (similarly 2 more if conditions) ...we have similar calculation for Period Type - 'Vested'.
This Period Type is a multiselect Prompt. How can this be achievable.
Any thoughts will be greatly appreciated.
Thanks.

I simply did as i got a tip on FB to do
quote from adobe themselves on facebook "Adobe Illustrator You might also want to try asking on our forums as there are many people that can help there as well! http://forums.adobe.com/community/illustrator/illustrator_general"
sry if it was wrong of me, simply thought there might be someone nice out there to give a helping hand
Date: Tue, 5 Jun 2012 13:41:48 -0600
From: [email protected]
To: [email protected]
Subject: Help needed with a design!
    Re: Help needed with a design!
    created by in Illustrator - View the full discussion
This really isn't the place to ask for free services.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4467790#4467790
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4467790#4467790. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Illustrator by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Help needed with breadcrums???

Hi thank you for reading,
On my site
http://www.dorff.nl/huize%20beekhuizen.html
you will see a nice page. On this page ive got no complaints.
Alle the text and images are looking good. But to have this i had to change the settings of the breadcrums.
Now all my other pages look like this..
file:///C:/Users/Gast%20Account/Desktop/vakantiehuizensuriname%20website/appartement%20she rida.html
As you can see there is too much space between the text and the photos. it seems i cant do one page without effecting an other.
Need some help to figure this out.
Regards Brian

all spaces are removed..
here is the link..
http://www.dorff.nl/appartementsherida.html
Regards Brian
Date: Thu, 26 Apr 2012 12:26:58 -0600
From: [email protected]
To: [email protected]
Subject: Help needed with breadcrums???
    Re: Help needed with breadcrums???
    created by Ken Binney in Dreamweaver - View the full discussion
Hi Brian - Please remove spaces from all file and folder names. Use a hyphen or underscorehuize%20beekhuizen.html Please put sherida.html online and post a link for us
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4363367#4363367
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4363367#4363367. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HT4759 In order for me to take advantage of transferring files, music, docs I need a new mac 10.5 or later. My computer is 10.4.11. So in other words I need to buy a new computer? To be able to use icloud sufficiently.

In order for me to take advantage of transferring files, music, docs I need a new mac 10.5 or later. My computer is 10.4.11. So in other words I need to buy a new computer? To be able to use icloud sufficiently?

Maybe, maybe not.
Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About This Mac", then "More Info..." Copy and paste the information here, but omit the serial number and Hardware UUID (if present).
For full iCloud you need 10.7 But the question really is, do you need all the things it does? I mean really? Oh, you don't mention if this question is in conjunction with some device you own. To whom and how are you transferring files?

Help! needed with new mac

Similar Messages

Maybe you are looking for