Help needed with print booklet in indesign

Help! When I attempt to print a 24 page booklet, indesign does not place my last page opposite my first page, and instead adds multiple blank pages to my document. I have the printer option to print blank pages on and I am using a multiple of four to compose my document. Any advice or guidance is much appreciated!

You need to ask in InDesign
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Similar Messages

Help needed with printer settings for wired ethernet connection

I'm hoping someone can help me with a network printing issue. I have a large format color laser printer (Tektronix Phaser) and since moving to OS 10.6 I can't figure out how to configure the printer so that the system sees it. I have a simple wired ethernet network with a couple of Macs and a couple of printers. All devices are connected via a switch. When using earlier OSs I was able to connect to the Phaser using Ethertalk. Obviously this is no longer supported and I can't figure out how to set the printer so the OS can see it. I have lots of options which can be turned on or off and in some cases set up in other ways: Ethertalk, IPX, Netware, TCP/IP, DNS, LPR, HTTP and remote internet printing, I've tried messing with these but the result is always the same--system doesn't see the printer. Currently Ethertalk is on, IPX and Netware are off, TCP/IP is on, DNS and LPR are on, as are AppSocket, HTTP, FTP and remote internet printing. I can change the IP address but no matter what address I've tried I cannot ping the printer. (I'm using a Gutenprint driver for this printer.)
I don't really know enough about all this to get anywhere and I haven't been able to find help anywhere even from tech friends. Xerox won't help me and neither will Apple. Any help would be appreciated. I can supply more detail on specifics where necessary. Thanks, Bob

Old Phaser models may becoming more and more difficult to use, but you can give this a try.
1. Configure the printer via front panel to use TCP/IP and enable DHCP if it's supported. If not then you will need to configure an IP address for the printer together with your local network's mask, and gateway IP address. Except for the first the others will be provided by opening Network preferences to see what those settings are. The printer's IP address needs to be set somewhere within the range of IP addresses your router provides locally.
2. You need the PPD file required for your printer. If you have the Phaser driver installer you can use it to install the PPD or you can extract the specific PPD from the installer package. This part is tricky because I don't know where you may find the driver now if you don't have the installer. The older installers can be accessed through the Finder by selecting the package then CTRL- or RIGHT-click and select Show Package Contents from the contextual menu. You can then rummage through the package to search for the PPD for your printer. Then navigate to the /Library/Printers/PPD/Contents/Resources/ folder and drop the PPD file inside.
3. Open Print & Fax preferences and click on Add [+] to add a new printer. Click on the IP icon in the toolbar. Select Line Printer Daemon - LPD from the Protocol drop down menu. Input the IP address you assigned the printer in the Address field. You can file in the optional fields that follow. Then from the Print Using drop down menu locate the listing for your printer and select it.

Problems with 'Print Booklet' from InDesign CS4

I am having problems using the 'Print Booklet commane in InDesign CS4. I have done this 100s of time from CS3 with no problems but for some reason it just won't auto duplex (print on both sides of the paper) when I do it from CS4. USing exactly the same settings, computer and file. The printer is setup correctly as will print double-sided automatically from other apps. Using mac leopard. Any ideas?

Unfortunately, I have tried this. I choose 'layout' from the printer option within the driver and pick 'short edged binding'. Still no luck.

Help needed with Printer Friendly template.

Hi
I know there loads of posts on here about "Printer Friendly" Templates which are far from being printer friendly. My problem is that most of my reports are very wide and therefore if you print it you loss the right hand side of the report even if you change the page layout.
Any Ideas or working examples of getting my reports onto a page without it been cut off?

Can anybody help me?

Help with print booklet to PostScript, Distiller

Please help if you can.
I am printing a booklet from InDesign CS3 to a PostScript file to then create tabloid-size imposed pages to send to a client for printing. It works when I do it with a legal-half booklet, but is failing with letter-size pages going to tabloid imposed pages (1 & 8, 2 & 7, etc.)
All I get is a log. Here is the log:
%%[ Error: invalidaccess; OffendingCommand: findfont ]%%
Stack:
/Font
/Tags
/CompressObjects
-dict-
/Description
/False
/PDFXTrapped
/PDFXRegistryName
/PDFXOutputConditionIdentifier
/PDFXOutputCondition
(None)
/PDFXOutputIntentProfile
[0.0 0.0 0.0 0.0]
/PDFXBleedBoxToTrimBoxOffset
true
/PDFXSetBleedBoxToMediaBox
[0.0 0.0 0.0 0.0]
/PDFXTrimBoxToMediaBoxOffset
true
/PDFXNoTrimBoxError
false
/PDFXCompliantPDFOnly
false
/PDFX3Check
false
/PDFX1aCheck
[/None]
/CheckCompliance
false
/AllowPSXObjects
(None)
/ColorSettingsFile
false
/InternalDisablePathOptimizer
0
/InternalForceUserUnit
false
/InternalDropAllImageData
0
/InternalOffOptimizations
0
/OffOptimizations
/Default
/DefaultRenderingIntent
1
/OPM
/Left
/Binding
true
/Optimize
false
/LockDistillerParams
false
/UsePrologue
true
/PreserveEPSInfo
true
/PreserveCopyPage
false
/PresumeRGBRepresentationIsLossless
true
/ParseDSCCommentsForDocInfo
true
/ParseDSCComments
1
/StartPage
false
/DoThumbnails
-1
/EndPage
false
/EmitDSCWarnings
(sRGB IEC61966-2.1)
/CalRGBProfile
(sRGB IEC61966-2.1)
/sRGBProfile
(Dot Gain 20%)
/CalGrayProfile
(U.S. Web Coated $SWOP$ v2)
/CalCMYKProfile
0.0
/DetectCurves
true
/DetectBlends
false
/CreateJDFFile
1.0
/SyntheticBoldness
0
/DSCReportingLevel
false
/EmbedJobOptions
false
/CreateJobTicket
true
/AutoPositionEPSFiles
/OK
/CannotEmbedFontPolicy
100
/MaxSubsetPct
true
/SubsetFonts
true
/ParseICCProfilesInComments
false
/EmbedOpenType
true
/EmbedAllFonts
/NeverEmbed
/AlwaysEmbed
false
/AllowRelativePathOps
false
/AllowTransparency
1048576
/ImageMemory
true
/PassThroughJPEGImages
true
/ConvertImagesToIndexed
-dict-
/MonoImageDict
/CCITTFaxEncode
/MonoImageFilter
true
/EncodeMonoImages
1.5
/MonoImageDownsampleThreshold
-1
/MonoImageDepth
1200
/MonoImageResolution
/Bicubic
/MonoImageDownsampleType
true
/DownsampleMonoImages
/OK
/MonoImageMinResolutionPolicy
1200
/MonoImageMinResolution
true
/CropMonoImages
false
/AntiAliasMonoImages
-dict-
/JPEG2000GrayImageDict
-dict-
/JPEG2000GrayACSImageDict
-dict-
/GrayImageDict
-dict-
/GrayACSImageDict
/JPEG
/GrayImageAutoFilterStrategy
true
/AutoFilterGrayImages
/DCTEncode
/GrayImageFilter
true
/EncodeGrayImages
1.5
/GrayImageDownsampleThreshold
2
/GrayImageMinDownsampleDepth
-1
/GrayImageDepth
300
/GrayImageResolution
/Bicubic
/GrayImageDownsampleType
true
/DownsampleGrayImages
/OK
/GrayImageMinResolutionPolicy
300
/GrayImageMinResolution
true
/CropGrayImages
false
/AntiAliasGrayImages
-dict-
/JPEG2000ColorImageDict
-dict-
/JPEG2000ColorACSImageDict
-dict-
/ColorImageDict
-dict-
/ColorACSImageDict
/JPEG
/ColorImageAutoFilterStrategy
true
/AutoFilterColorImages
/DCTEncode
/ColorImageFilter
true
/EncodeColorImages
1.5
/ColorImageDownsampleThreshold
1
/ColorImageMinDownsampleDepth
-1
/ColorImageDepth
300
/ColorImageResolution
/Bicubic
/ColorImageDownsampleType
true
/DownsampleColorImages
/OK
/ColorImageMinResolutionPolicy
300
/ColorImageMinResolution
true
/CropColorImages
false
/AntiAliasColorImages
true
/PreserveFlatness
false
/PreserveHalftoneInfo
true
/PreserveDICMYKValues
/LeaveColorUnchanged
/ColorConversionStrategy
true
/PreserveOverprintSettings
/Preserve
/UCRandBGInfo
/Apply
/TransferFunctionInfo
/All
/AutoRotatePages
true
/UseFlateCompression
false
/ASCII85EncodePages
true
/CompressPages
false
/PreserveOPIComments
1.5
/CompatibilityLevel
8000
/CoreDistVersion
-mark-
/Apple-Chancery
/Apple-Chancery
/IERNAS+App

I am using Print Booklet from InDesign CS3, printing to a PostScript file.
I saw Apple Chancery in the log so I thought that might have been the problem. So I went back to Suitcase Fusion and activated Apple Chancery, with the same result.
I do note that Apple Chancery is a TrueType font. The other fonts in the publication are Arial family (OpenType TrueType) and Times Regular (TrueType). Preflight in ID CS3 indicates no problems, all fonts are OK, and none are protected.
Quit InDesign and re-launched. Same problem.

Help needed with java

Hello everyone
I'm a Student and new to java and I have been given a question which I have to go through. I have come across a problem with one of the questions and am stuck, so I was wondering if you guys could help me out.
here is my code so far:
A Class that maintains Information about a book
This might form part of a larger application such
as a library system, for example.
@author (your name)
*@version (a version number or a date)*
public class Book
// instance variables or fields
private String author;
private String title;
Set the author and title when the book object is constructed
public Book(String bookAuthor, String bookTitle)
author = bookAuthor;
title = bookTitle;
Return The name of the author.
public String getAuthor()
return author;
Return The name of the title.
public String getTitle()
return title;
and below are the questions that I need to complete. they just want me to add codes to my current one, but the problem is I don't know where to put them and how I should word them, if that makes sense.
Add a further instance variable/field pages to the Book class to store the number of pages in the book.
This should be of type int and should be set to 0 in the Constructor.
Add a second Constructor with signature
public Book(String bookAuthor, String bookTitle, int noPages) so it has a third parameter passed to it as well as the author and title;
this parameter is used - obviously?? - to initialise the number of pages.
Note: This is easiest done by making a copy of the existing Constructor and adding the parameter.
Add a getPages() accessor method that returns the number of pages in the book.
Add a method printDetails() to your Book class. This should print out the Author title and number of pages to the Terminal Window. It is your choice as to how the data is formatted, perhaps all on one line, perhaps on three, and with or without explanatory text. For instance you could print out in the format:
Title: Robinson Crusoe, Author: Daniel Defoe, Pages:226
Add a further instance variable/field refNumber() to your Book class. This stores the Library's reference number. It should be of type String and be initialised to the empty String "" in the constructor, as its initial value is not passed in as a parameter. Instead a public mutator method with the signature:
public void setRefNumber(String ref) should be created. The body of this method should assign the value of the method parameter ref to the refNumber.
Add a corresponding getRefNumber() accessor method to your class so you can check that the mutator works correctly
Modify your printDetails() method to include printing the reference number of the book.
However the method should print the reference number only if it has been set - that is the refNumber has a non-zero length.
If it has not been set, print "ZZZ" instead.
Hint Use a conditional statement whose test calls the length() method of the refNumber String and gives a result like:
Title: Jane Eyre, Author: Charlotte Bronte, Pages:226, RefNo: CB479 or, if the reference number is not set:
Title: Robinson Crusoe, Author: Daniel Defoe, Pages:347, RefNo: ZZZ
Modify your setRefNumber() method so that it sets the refNumber field only if the parameter is a string of at least three characters. If it is less than three, then print an error message (which must contain the word error) and leave the field unchanged
Add a further integer variable/field borrowed to the Book class, to keep a count of the number of times a book has been borrowed. It should (obviously??) be set to 0 in the constructor.
Add a mutator method borrow() to the class. This should increment (add 1 to) the value of borrowed each time it is called.
Include an accessor method getBorrowed() that returns the value of borrowed
Modify Print Details so that it includes the value of the borrowed field along with some explanatory text
PS. sorry it looks so messey

1. In the future, please use a more meaningful subject. "Help needed with java" contains no information. The very fact that you're posting here tells us you need help with Java. The point of the subject is to give the forum an idea of what kind of problem you're having, so that individuals can decide if they're interested and qualified to help.
2. You need to ask a specific question. If you have no idea where to start, then start here: [http://home.earthlink.net/~patricia_shanahan/beginner.html]
3. When you post code, use code tags. Copy the code from the original source in your editor (NOT from an earlier post here, where it will already have lost all formatting), paste it in here, highlight it, and click the CODE button.

Print booklets from InDesign.

I used to create print booklets from InDesign but this option disappeared with version CS5. Is Adobe doing anything about restoring this feature? What are my options in the meantime?

Are you patched to 5.0.4?
I run XP SP2, rather than 3, and Acrobat 9 pro (now at version 9.3.2) and I haven't had a problem using Print Booklet to make a PDF, so I suspect either it's something in SP3, or more likely a problem on the system.
First thing might be to try replacing your preferences. See Replace Your Preferences
Next might be to unistall the PDF printer and reinstall it (does it work outside of Print Booklet?). Make sure you update Acrobat first, if you haven't already done so.
If neither of those works, see if there's anything else running in the background that could be causing a problem.
Finally, if nothing is working, it's time to look at a scripted solution. I know two scripts, both by Dave Saunders, that can handle simple two-up saddle stitch impositions without creep. One is better than the other if you have objects crossing the spine, but neither is as sophiticated in what it can do as Print Booklet, which can handle perfect binding with various signature sizes.

HELP NEEDED WITH ADDAPTER-DVI TO VGA.

PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE...
......THIS ENSURES NO SMOKE!!!
THE CARD IS AN ATI RADEON RX9250-DUAL HEAD-.........ADDAPTER IS DVI(ANALOG)MALE TO VGA(ANALOG)FEMALE.
ANY HELP VERY MUCH APPRECIATED........ SEEMS YOU NEED TO BE ROCKET SCI TO ATTACH A BLOODY PICTURE...SO THIS HAS BEEN BIG WASTE OF FING TIME!

Quote from: BOBHIGH on 17-December-05, 09:21:31
Get over it mate !
I find it easy t read CAPS...and if you dont like it ...DONT READ IT!
And why bother to reply...some people have nothing better to do.
Yes there chep and easy to come by...Ive already got a new one.
All I wanted was to make a diagram of whats inside the bloody thing...it was a simple question and required a simple answer.
NO NEED TO A WANKA !!
I feel a bann comming up.
Have you tryed Google ? really.. your question is inrelevant. No need to reply indeed.
Why do you come here asking this question anyway ? is it becouse you have a MSI gfx card ? and the adapter has nothing to do with this ?
You think you can come in here yelling.. thinking we have to put up with it and accept your style of posting. This is not a MSI tech center.. it's a user to user center.. Your question has nothing to do with MSI relavant things anyway's.
Google = your friend.
Quote from: BOBHIGH on 17-December-05, 09:21:31
it was a simple question and required a simple answer
Simple for who ? you (buying a new one) ? me ? we ? .really...........
Quote from: Dynamike on 16-December-05, 04:11:48
1: There are allot of diffrent types of those adapters.
If any of the mods have a problem about my reply.. please pm me.

Help needed with Vista 64 Ultimate

"Help needed with Vista 64 UltimateI I need some help in getting XFI Dolby digital to work
Okay so i went out and I bought a yamaha 630BL reciever, a digital coaxial s/pdif, and a 3.5mm phono plug to fit perfectly to my XFI Extreme Music
-The audio plays fine and reports as a PCM stream when I play it normally, but I can't get dolby digital or DTS to enable for some reason eventhough I bought the DDL & DTS Connect Pack for $4.72
When I click dolby digital li've in DDL it jumps back up to off and has this [The operation was unsuccessful. Please try again or reinstall the application].
Message Edited by Fuzion64 on 03-06-2009 05:33 AMS/PDIF I/O was enabled under speakers in control panel/sound, but S/PDIF Out function was totally disabled
once I set this to enabled Dolby and DTS went acti've.
I also have a question on 5. and Vista 64
-When I game I normally use headphones in game mode or 2. with my headphones, the reason for this is if I set it on 5. I get sounds coming out of all of the wrong channels.
Now when I watch movies or listen to music I switch to 5. sound in entertainment mode, but to make this work properly I have to open CMSS-3D. I then change it from xpand to stereo and put the slider at even center for 50%. If I use the default xpand mode the audio is way off coming out of all of the wrong channels.
How do I make 5. render properly on vista

We ended up getting iTunes cleanly uninstalled and were able to re-install without issue. All is now mostly well.
Peace...

Help needed with itunes

help needed with itunes please tryed to move my itunes libary to my external hard drive itunes move ok and runs fin but i have none of my music or apps or anything all my stuff is in the itunes folder on my external hard drive but there is nothing on ituns how do i get it back help,please

(Make sure the Music (top left) library is selected before beginning this.)
If you have bad song links in your library, hilite them and hit the delete button. Then locate the folder(s) where your music is located and drag and drop into the large library window in iTunes ( where your tracks show up). This will force the tunes into iTunes. Before you start, check your preferences in iTunes specifically under the"Advanced" tab, general settings. I prefer that the 1st 2 boxes are unchecked. (Keep iTunes Music folder organized & Copy files to iTunes Music folder when adding to library). They are designed to let iTunes manage your library. I prefer to manage it myself. Suit yourself. If there is a way for iTunes to restore broken links other than locating one song at a time I haven't found it yet. (I wish Apple would fix this, as I have used that feature in other apps.) This is the way I do it and I have approx. 25,000 songs and podcasts and videos at present. Hope this helps.

Urgent help needed with un-removable junk mail that froze Mail!!

Urgent help needed with un-removable junk mail that froze Mail?
I had 7 junk mails come in this morning, 5 went straight to junk and 2 more I junked.
When I clicked on the Junk folder to empty it, it froze Mail and I can't click on anything, I had to force quit Mail and re-open it. When it re-opens the Junk folder is selected and it is froze, I can't do anything.
I repaired permissions, it did nothing.
I re-booted my computer, on opening Mail the In folder was selected, when I selected Junk, again, it locks up Mail and I can't select them to delete them?
Anyone know how I can delete these Junk mails from my Junk folder without having to open Mail to do it as it would appear this will be the only solution to the problem.

Hi Nigel
If you hold the Shift key when opening the mail app, it will start up without any folders selected & no emails showing. Hopefully this will enable you to start Mail ok.
Then from the Mail menus - choose Mailbox-Erase Junk Mail . The problem mail should now be in the trash. If there's nothing you want to retain from the Trash, you should now choose Mailbox- Erase Deleted Messages....
If you need to double-check the Trash for anything you might want to retain, then view the Trash folder first, before using Erase Junk Mail & move anything you wish to keep to another folder.
The shift key starts Mail in a sort of Safe mode.

Help needed with this form in DW

Hi, i have created this form in dreamweaver but ive got this problem.
In the fields above the text field, the client needs to fill in some info such as name, email telephone number etc.
But the problem is when ill get the messages. Only the text from the large text field is there.
What did i do wrong??
http://www.hureninparamaribo.nl/contact.html
Thank you
Anybody??

Thank you for your response. So what do i have to do to fix this?
Date: Sun, 20 Jan 2013 07:57:56 -0700
From: [email protected]
To: [email protected]
Subject: Help needed with this form in DW
    Re: Help needed with this form in DW
    created by Ken Binney in Dreamweaver General - View the full discussion
You have several duplicate "name" attributes in these rows which also appears in the first row
Telefoon:
Huurperiode:
Aantal personen:
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5008247#5008247
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5008247#5008247
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5008247#5008247. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver General by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Help needed with header and upload onto business catalyst

Can someone help with a problem over a header please?
I have inserted a rectangle with a jpeg image in background, in the 'header' section, underneath the menu. It comes up fine on most pages when previsualised, going right to the side of the screen, but stops just before the edge on certain pages. I have double checked that I have placed it in the right place in relation to the guides on the page.
That's one problem.
The second problem is that I tried to upload onto business catalyst, which got to 60% and refused to go any further, saying it couldn't find the header picture, giving the title and then u4833-3.fr.png. The picture is in the right folder I have double checked. And it isn't a png. Does it have to be ?
And the third problem is that I got an email following my upload from business catalyst in Swedish. I am living in France.
Can anyone help ? Thanks.

Thanks for replying,
How can I check the preview in other browsers before I publish a provisional site with BC?
The rectangle width issue happens on certain pages but not others. The Welecom page is fine when the menu is active, also the contact page, but others are slightly too narrow. Changing the menu spacing doesn’t help - I was already on uniform but tried changing to regular and back.
In design mode the rectangle is set to the edge of the browser, that’s 100%browser width right?
Re BC I have about 200 images on 24 different pages and it seems to be having difficulty uploading some of them. But it has managed a couple I named with spaces but not others I named with just one name.
Is there an issue on size of pictures ? If I need to replace is there a quick way to rename and relink or do I have to insert the photos all over again?
I’m a novice with Muse with an ambitious site !
Thanks for your help.
Mary Featherstone
Envoyé depuis Courrier Windows
De : Sanjit_Das
Envoyé : vendredi 14 février 2014 22:15
À : MFeatherstone
Re: Help needed with header and upload onto business catalyst
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Hi
Answering the questions :
- Have you checked the preview in Muse and also in other browsers ?
- Does the rectangle width issue happens when menu is active , or in any specific state , Try to change the menu with uniform spacing and then check.
- In design view the rectangle is set to 100% browser width ?
With publishing :
- Please try to rename the image file and then relink
- If it happens with other images as well , see if all the image names includes strange characters or spaces.
- Try again to publish
With e-mail from BC :
- Under preferences , please check the country selected.
- If you have previously created partner account in BC and selected country and language then it would follow that, please check that.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6121942#6121942
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6121942#6121942
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6121942#6121942. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Help needed with Elements 5.0

Trying to Edit photos. Click on Edit icon and I get the Message " Attempt to Access invalid address". Click OK get message "Unable to connect to editor application.
What is the problem? I have unenstalled to program and reinstalled, I have tried repairing from CD. Nothing works. Please help.

I have the disc and re-installed a couple of time. No positive result. PSE 09 which I bought thereafter is giving a lot of problems also!!!
Date: Wed, 8 Jun 2011 10:31:24 -0600
From: [email protected]
To: [email protected]
Subject: Help needed with Elements 5.0
Doesn't really help either of us very much but I'm also having the same problem with Elements 5. I downloaded the program so I don't have disks to reinstall. And it seems from the other reply that Adobe has given up with the "old program," which incidentally was working fine until two days ago. Maybe I'll have to think about PSE9!
>

Help needed with BBDM 5.0.1 IP Modem

Hi I was happily connecting thru the Net via the IP Modem in BBDM ver 5.0.1 all this while. Only this happened yesterday. Accidentally during the connection, my 9500 was disconnected from the USB cable. From that moment on, I cannot access the Net using the IP Modem feature. Tried to reboot the laptop as well as the 9500 but now all I get is the connecting message and then a pop up saying there is a hardware failure in the connecting device (or modem) ie the BB 9500.
I even uninstalled BBDM 5.0.1 and reinstalled ver 5.0 and also updated back to 5.0.1 - same story. I can still access the Net via the BB browser etc
Advise please thanks in advance

I have the disc and re-installed a couple of time. No positive result. PSE 09 which I bought thereafter is giving a lot of problems also!!!
Date: Wed, 8 Jun 2011 10:31:24 -0600
From: [email protected]
To: [email protected]
Subject: Help needed with Elements 5.0
Doesn't really help either of us very much but I'm also having the same problem with Elements 5. I downloaded the program so I don't have disks to reinstall. And it seems from the other reply that Adobe has given up with the "old program," which incidentally was working fine until two days ago. Maybe I'll have to think about PSE9!
>

Help needed with print booklet in indesign

Similar Messages

Maybe you are looking for