Help needed with these questions., plz

Hello Gurus,
1.     In bw 3.5, we have only u201CIntialyze delta without data Transferu201D, u201CEarly delta Intialyzationu201D & u201C Full uploadu201D. How can I do regular DELTA loads using infopackage?
2.     In BI 7.0, we have only u201Cdelta DTPu201D, u201C Full DTPu201D. How can I do initialization of Delta, since we do only full load using infopackage till PSA?
3.      How do we decide if we have to create secondary indexes?
4.         How do you decide on which info object we have to create aggregate. What r the conditions?
Regards,
PNK

Hi Pnk,
1 . Create infopack with Intialyze delta with data Transfer , once this load is done . If you create another infopak then Delta
will be enabled . Same as the case for 'Intialyze delta without data Transfer' this load will set delta in the source system and the next new infopack will be delta enabled.
2 . Set ur DTP as Delta and execute , the first load will bring all the data which is reciding in the PSA , I mean the first load will
act as Initialization . from second load it will act as Delta .
3. If you have any DSO which is reportable , need to chk hw users are looking at the data , I mean drill downs if they drill
down other than key fields then inorder to get data faster we need to create secondary indexes
4. try to analyse hw the users are drilling down on data ( In queries/work books), take those inputs and create aggregates on those .
Regards
Santosh
Edited by: santosh on Feb 23, 2010 12:48 AM

Similar Messages

HELP NEEDED WITH SOME QUESTIONS

Could ye guys help, I have some questions and I dont know the answers of them! any solutions would be great
Distinguish between composition and inheritance as used in object-oriented programming. As part of your answer, provide examples of different situations in which each would be more appropriate.
What is meant by recursion as an algorithmic strategy in working with abstract data structures, and why is such an approach considered worthwhile? Illustrate your answer with an example sorting algorithm in Java that can be sorted linearly and recursively.
Given an alphabet of {x,y,z} possessing the following frequency distributions {1/8, 1/4, 5/8}, show how this information may be used to construct a prefix code binary tree. Given the code 11000111100, show how this is decoded using this construct.
Any ideas??

086kerry wrote:
lad if you had seen what I had to do already, its not as if I want the answers, just help. I cant find anything satisfactory on the web.Not to quick are ye?
If you can't do more than post your assignment and cry for help then you might as well give up now. Nobody is going to do your work for you. You have done NOTHING yet so start working on it and if you run into problems come back with your code and ask questions about it.

Urgent help needed with cookie question

Hi guys,
my question is:
if any servlet generate a cookie object ( during http connection, of course ), so it will always store this cookie on the client side ( the user' browser) , which called the servlet ( of course). Is it right? If yes, what happens if the browser doesnt accept cookies?
Thanks in advance, Euclides.

Hi
According to me The values will not store if Cookies are disabled by client untill and unless u do,nt use any other mechanism to store it e.g Session , UrlRedirection
Regards
Saurabh Singhal

Help needed with Game AI - cash waiting

Hi everyone,
I have created a game (java applet). Works fully, and has some basic game strategies, but I need to implement some complex AI strategies - such as minimax? minimax(alpha-beta)? A* ? End game database? - I need any two.
If you are good with this sort of stuff it could be done in 3 hours or less. The whole game works fine just want to implement these advanced strategies.
Price can be discussed and sent via paypal or bank transfer.
The only catch is that I need this by 26th.
Leave your details below if you're interested.

There is a forum here for algorithms... you'll find you have to code your own there too, and then people will help you with specific questions. As always if you have your own code and you have specific questions and can pose resonable questions as to why it doesn't work -- most here will be glad to help.
The reason many, including myself, will not just do homework is that we've had to do our own homework to pass the classes we took... get through on our own... and feel those that cannot do the same perhaps don't deserver to continue.
Sorry if you cannot understand this or it seems harsh, but life is that way.

HELP NEEDED WITH ADDAPTER-DVI TO VGA.

PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE...
......THIS ENSURES NO SMOKE!!!
THE CARD IS AN ATI RADEON RX9250-DUAL HEAD-.........ADDAPTER IS DVI(ANALOG)MALE TO VGA(ANALOG)FEMALE.
ANY HELP VERY MUCH APPRECIATED........ SEEMS YOU NEED TO BE ROCKET SCI TO ATTACH A BLOODY PICTURE...SO THIS HAS BEEN BIG WASTE OF FING TIME!

Quote from: BOBHIGH on 17-December-05, 09:21:31
Get over it mate !
I find it easy t read CAPS...and if you dont like it ...DONT READ IT!
And why bother to reply...some people have nothing better to do.
Yes there chep and easy to come by...Ive already got a new one.
All I wanted was to make a diagram of whats inside the bloody thing...it was a simple question and required a simple answer.
NO NEED TO A WANKA !!
I feel a bann comming up.
Have you tryed Google ? really.. your question is inrelevant. No need to reply indeed.
Why do you come here asking this question anyway ? is it becouse you have a MSI gfx card ? and the adapter has nothing to do with this ?
You think you can come in here yelling.. thinking we have to put up with it and accept your style of posting. This is not a MSI tech center.. it's a user to user center.. Your question has nothing to do with MSI relavant things anyway's.
Google = your friend.
Quote from: BOBHIGH on 17-December-05, 09:21:31
it was a simple question and required a simple answer
Simple for who ? you (buying a new one) ? me ? we ? .really...........
Quote from: Dynamike on 16-December-05, 04:11:48
1: There are allot of diffrent types of those adapters.
If any of the mods have a problem about my reply.. please pm me.

Help needed with Vista 64 Ultimate

"Help needed with Vista 64 UltimateI I need some help in getting XFI Dolby digital to work
Okay so i went out and I bought a yamaha 630BL reciever, a digital coaxial s/pdif, and a 3.5mm phono plug to fit perfectly to my XFI Extreme Music
-The audio plays fine and reports as a PCM stream when I play it normally, but I can't get dolby digital or DTS to enable for some reason eventhough I bought the DDL & DTS Connect Pack for $4.72
When I click dolby digital li've in DDL it jumps back up to off and has this [The operation was unsuccessful. Please try again or reinstall the application].
Message Edited by Fuzion64 on 03-06-2009 05:33 AMS/PDIF I/O was enabled under speakers in control panel/sound, but S/PDIF Out function was totally disabled
once I set this to enabled Dolby and DTS went acti've.
I also have a question on 5. and Vista 64
-When I game I normally use headphones in game mode or 2. with my headphones, the reason for this is if I set it on 5. I get sounds coming out of all of the wrong channels.
Now when I watch movies or listen to music I switch to 5. sound in entertainment mode, but to make this work properly I have to open CMSS-3D. I then change it from xpand to stereo and put the slider at even center for 50%. If I use the default xpand mode the audio is way off coming out of all of the wrong channels.
How do I make 5. render properly on vista

We ended up getting iTunes cleanly uninstalled and were able to re-install without issue. All is now mostly well.
Peace...

Urgent help needed with un-removable junk mail that froze Mail!!

Urgent help needed with un-removable junk mail that froze Mail?
I had 7 junk mails come in this morning, 5 went straight to junk and 2 more I junked.
When I clicked on the Junk folder to empty it, it froze Mail and I can't click on anything, I had to force quit Mail and re-open it. When it re-opens the Junk folder is selected and it is froze, I can't do anything.
I repaired permissions, it did nothing.
I re-booted my computer, on opening Mail the In folder was selected, when I selected Junk, again, it locks up Mail and I can't select them to delete them?
Anyone know how I can delete these Junk mails from my Junk folder without having to open Mail to do it as it would appear this will be the only solution to the problem.

Hi Nigel
If you hold the Shift key when opening the mail app, it will start up without any folders selected & no emails showing. Hopefully this will enable you to start Mail ok.
Then from the Mail menus - choose Mailbox-Erase Junk Mail . The problem mail should now be in the trash. If there's nothing you want to retain from the Trash, you should now choose Mailbox- Erase Deleted Messages....
If you need to double-check the Trash for anything you might want to retain, then view the Trash folder first, before using Erase Junk Mail & move anything you wish to keep to another folder.
The shift key starts Mail in a sort of Safe mode.

Help needed with this form in DW

Hi, i have created this form in dreamweaver but ive got this problem.
In the fields above the text field, the client needs to fill in some info such as name, email telephone number etc.
But the problem is when ill get the messages. Only the text from the large text field is there.
What did i do wrong??
http://www.hureninparamaribo.nl/contact.html
Thank you
Anybody??

Thank you for your response. So what do i have to do to fix this?
Date: Sun, 20 Jan 2013 07:57:56 -0700
From: [email protected]
To: [email protected]
Subject: Help needed with this form in DW
    Re: Help needed with this form in DW
    created by Ken Binney in Dreamweaver General - View the full discussion
You have several duplicate "name" attributes in these rows which also appears in the first row
Telefoon:
Huurperiode:
Aantal personen:
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5008247#5008247
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5008247#5008247
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5008247#5008247. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver General by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Help needed with header and upload onto business catalyst

Can someone help with a problem over a header please?
I have inserted a rectangle with a jpeg image in background, in the 'header' section, underneath the menu. It comes up fine on most pages when previsualised, going right to the side of the screen, but stops just before the edge on certain pages. I have double checked that I have placed it in the right place in relation to the guides on the page.
That's one problem.
The second problem is that I tried to upload onto business catalyst, which got to 60% and refused to go any further, saying it couldn't find the header picture, giving the title and then u4833-3.fr.png. The picture is in the right folder I have double checked. And it isn't a png. Does it have to be ?
And the third problem is that I got an email following my upload from business catalyst in Swedish. I am living in France.
Can anyone help ? Thanks.

Thanks for replying,
How can I check the preview in other browsers before I publish a provisional site with BC?
The rectangle width issue happens on certain pages but not others. The Welecom page is fine when the menu is active, also the contact page, but others are slightly too narrow. Changing the menu spacing doesn’t help - I was already on uniform but tried changing to regular and back.
In design mode the rectangle is set to the edge of the browser, that’s 100%browser width right?
Re BC I have about 200 images on 24 different pages and it seems to be having difficulty uploading some of them. But it has managed a couple I named with spaces but not others I named with just one name.
Is there an issue on size of pictures ? If I need to replace is there a quick way to rename and relink or do I have to insert the photos all over again?
I’m a novice with Muse with an ambitious site !
Thanks for your help.
Mary Featherstone
Envoyé depuis Courrier Windows
De : Sanjit_Das
Envoyé : vendredi 14 février 2014 22:15
À : MFeatherstone
Re: Help needed with header and upload onto business catalyst
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Hi
Answering the questions :
- Have you checked the preview in Muse and also in other browsers ?
- Does the rectangle width issue happens when menu is active , or in any specific state , Try to change the menu with uniform spacing and then check.
- In design view the rectangle is set to 100% browser width ?
With publishing :
- Please try to rename the image file and then relink
- If it happens with other images as well , see if all the image names includes strange characters or spaces.
- Try again to publish
With e-mail from BC :
- Under preferences , please check the country selected.
- If you have previously created partner account in BC and selected country and language then it would follow that, please check that.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6121942#6121942
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6121942#6121942
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6121942#6121942. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Please help me with some questions with batch input session?

hello everyone.
I come to some questions like
1 What is a batch input session ,
2 What is the alternative to batch input session?
3 An ABAP program creates a batch input session.   We need to submit the program and the batch session in back ground. How to do it?
   would you please help me with the questions, couldn't thank you more.
   Best regards
                                                                      Frank

Hi
Batch Input Session:
BATCH INPUT SESSION is an intermediate step between internal table
and database table. Data along with the action is stored in session
ie data for screen fields, to which screen it is passed, program
name behind it, and how next screen is processed.
Three processing modes of executing Batch Input Session :-
Run Visibly : You can correct faulty transactions online & work step-by-step through the transactions not yet executed.
Display Errors only : You can correct faulty transactions online.   Transactions not yet executed, but without error, run in the background.
Run in Background .
2) What is the alternative to batch input session?
Call transaction.
3) An ABAP program creates a batch input session. We need to submit the program and the batch session in back ground. How to do it?
go to SM36 and create background job by giving
     job name,job class and job steps (JOB SCHEDULING)

Help needed with Pages

I am about to commit and purchase the ipad in the uk (28th May). I do not need a laptop and hope you can help me with this question. I will be using both pages and numbers applications and my question regards saving files. Can somebody please explain how you save on the ipad is it into folders like my imac etc. can you then browse the folders for your documents etc and can you name them or does the ipad name ?. Can anybody help me with this and explain it or point me to any site ?. many thanks
Mitch

In case you haven't seen them, here are the faqs for pages and numbers. Note that pages can export to .doc but numbers cannot export to .xls
http://support.apple.com/kb/HT4065
http://support.apple.com/kb/HT4067

Help needed with java

Hello everyone
I'm a Student and new to java and I have been given a question which I have to go through. I have come across a problem with one of the questions and am stuck, so I was wondering if you guys could help me out.
here is my code so far:
A Class that maintains Information about a book
This might form part of a larger application such
as a library system, for example.
@author (your name)
*@version (a version number or a date)*
public class Book
// instance variables or fields
private String author;
private String title;
Set the author and title when the book object is constructed
public Book(String bookAuthor, String bookTitle)
author = bookAuthor;
title = bookTitle;
Return The name of the author.
public String getAuthor()
return author;
Return The name of the title.
public String getTitle()
return title;
and below are the questions that I need to complete. they just want me to add codes to my current one, but the problem is I don't know where to put them and how I should word them, if that makes sense.
Add a further instance variable/field pages to the Book class to store the number of pages in the book.
This should be of type int and should be set to 0 in the Constructor.
Add a second Constructor with signature
public Book(String bookAuthor, String bookTitle, int noPages) so it has a third parameter passed to it as well as the author and title;
this parameter is used - obviously?? - to initialise the number of pages.
Note: This is easiest done by making a copy of the existing Constructor and adding the parameter.
Add a getPages() accessor method that returns the number of pages in the book.
Add a method printDetails() to your Book class. This should print out the Author title and number of pages to the Terminal Window. It is your choice as to how the data is formatted, perhaps all on one line, perhaps on three, and with or without explanatory text. For instance you could print out in the format:
Title: Robinson Crusoe, Author: Daniel Defoe, Pages:226
Add a further instance variable/field refNumber() to your Book class. This stores the Library's reference number. It should be of type String and be initialised to the empty String "" in the constructor, as its initial value is not passed in as a parameter. Instead a public mutator method with the signature:
public void setRefNumber(String ref) should be created. The body of this method should assign the value of the method parameter ref to the refNumber.
Add a corresponding getRefNumber() accessor method to your class so you can check that the mutator works correctly
Modify your printDetails() method to include printing the reference number of the book.
However the method should print the reference number only if it has been set - that is the refNumber has a non-zero length.
If it has not been set, print "ZZZ" instead.
Hint Use a conditional statement whose test calls the length() method of the refNumber String and gives a result like:
Title: Jane Eyre, Author: Charlotte Bronte, Pages:226, RefNo: CB479 or, if the reference number is not set:
Title: Robinson Crusoe, Author: Daniel Defoe, Pages:347, RefNo: ZZZ
Modify your setRefNumber() method so that it sets the refNumber field only if the parameter is a string of at least three characters. If it is less than three, then print an error message (which must contain the word error) and leave the field unchanged
Add a further integer variable/field borrowed to the Book class, to keep a count of the number of times a book has been borrowed. It should (obviously??) be set to 0 in the constructor.
Add a mutator method borrow() to the class. This should increment (add 1 to) the value of borrowed each time it is called.
Include an accessor method getBorrowed() that returns the value of borrowed
Modify Print Details so that it includes the value of the borrowed field along with some explanatory text
PS. sorry it looks so messey

1. In the future, please use a more meaningful subject. "Help needed with java" contains no information. The very fact that you're posting here tells us you need help with Java. The point of the subject is to give the forum an idea of what kind of problem you're having, so that individuals can decide if they're interested and qualified to help.
2. You need to ask a specific question. If you have no idea where to start, then start here: [http://home.earthlink.net/~patricia_shanahan/beginner.html]
3. When you post code, use code tags. Copy the code from the original source in your editor (NOT from an earlier post here, where it will already have lost all formatting), paste it in here, highlight it, and click the CODE button.

Help needed with itunes

help needed with itunes please tryed to move my itunes libary to my external hard drive itunes move ok and runs fin but i have none of my music or apps or anything all my stuff is in the itunes folder on my external hard drive but there is nothing on ituns how do i get it back help,please

(Make sure the Music (top left) library is selected before beginning this.)
If you have bad song links in your library, hilite them and hit the delete button. Then locate the folder(s) where your music is located and drag and drop into the large library window in iTunes ( where your tracks show up). This will force the tunes into iTunes. Before you start, check your preferences in iTunes specifically under the"Advanced" tab, general settings. I prefer that the 1st 2 boxes are unchecked. (Keep iTunes Music folder organized & Copy files to iTunes Music folder when adding to library). They are designed to let iTunes manage your library. I prefer to manage it myself. Suit yourself. If there is a way for iTunes to restore broken links other than locating one song at a time I haven't found it yet. (I wish Apple would fix this, as I have used that feature in other apps.) This is the way I do it and I have approx. 25,000 songs and podcasts and videos at present. Hope this helps.

Please help me with this questions "if I purchased items through mac or windows is it possible to re-download those purchases on Apple TV though iCloud"

Please help me with this questions "if I purchased items through mac or windows is it possible to re-download those purchases on Apple TV though iCloud"

It depends on what country you're in and whether or not they're still available in the iTunes Store. Some purchased movies and all rentals won't be available.
(108225)

I want to create org data profile in service scenario, with price determination from sales org, distribution centre , can any one help me with these

i want to create org data profile in service scenario, with price determination from sales org, distribution centre , can any one help me with these
IF I CREATE SERVICE ORG WITH SERVICE SCENARIO ORG DATA PROFILE,
MY PRICING IS NOT GETTING DETERMINED AS IT IS LINKED TO SALES ORG AND DISTRIBUTION CHANNEL THROUGH PRICING DETERMINATION SO HOW TO DO THE CUSTOMIZATION FOR THIS SITUATION
WITH REGARDS,
SATHISH

Hi Satish,
Please assign the org det. rules to org det. profile with Sales and Service scenarios and then assign the org. det. profile to transaction type. The below screenshot is just for your reference.
Hope it would fix your issue.
Regards,

Help needed with these questions., plz

Similar Messages

Maybe you are looking for