Help needed working with layers and exporting from acrobat3d

hi, i am repostng this message becaus eihad no success last time, and I am working under a tight deadline for a school project. any help will be tremendously appreciated
I received an Acrobat 3d file with a model that was originally created in CATIA v4 embedded in it.
I need to export the model for use in rhino. Currently the model size is enormous as an IGES that Windows runs out of memory when attempting to open. This is a bit wasteful since I do not need all of the model, I just need a layer of it. I noticed that when exporting to IGES you have the option to export hidden or not, and I have hidden the layers i do not need (via Isolation) and still I get the whole file.
Is there a way I can do this? export the file With the layers under the model tree? or is there a way I can delete a layer? or how can I make the hidden object feature work when Exporting IGES as not to get the things I dont need?
I read that you can open the model in Toolkit to edit it but it wont let me, open it... no "edit 3d in toolkit" option and when i open the pdf in toolkit it says unknown file....
is there a way i can open the embedded model in CATIA again?
thanks for the help

Please email me your contact information at [email protected] and I might be able to help you.
Thanks.

Similar Messages

Working with links and exporting to Quicktime

When i create a Quicktime and play it on a Windows PC, it gets confused with internal lnks. I build in some links that refer to another page into the Quicktime file. When i click them on a PC, they start up Explorer instead of going to that page. CAn't seem to figure it out...

Hi John,
the uploading to .mac usually uses a sorenson codec in a .mov container.
That can be watched on PC just when the free Quicktime Player for Windows is installed. does your friends have done that...?
It tells them they're missing some compressor. Downloading the newest version of QT does not help either. newest version for PC or on your Mac's side?
QT7 offers now the brandnew h.264 compression codec... this isn't supported on the Windows side yet (just experimental/beta)... so using the "latest" is maybe the wrong way...
in the iM export dialog you'll find the option ".avi" (PC container + sorenson codec) try that for a mail (big files!) and your friends should see your movie...
and tell them, they shall buy a Mac, hey, c'mon!
you can offer downloads of your project on .mac, but not as convenient as the "upload to" function. ... but that is another cup of tea......

Cannot print "working with files and folders htm

When I try to print "Working with files-and-folders" from a Google search, it only prints part of it. I have changed my destination folder to no avail. Thank you or any help, Jack Menendez

What's the best method for moving all my nonsystem related stuff over to this new driveIan has provided you with the best solution, SuperDuper.
But if you have a 250 GB external, you really ought to clone your entire system,(only about 3 GB) so you have a backup.
I keep mine with a complete clone of my internal, that way it is easy to boot from the external and run utilities like Disk Utility, TechToolPro, DiskWarrior, etc. on the internal and vice versa.
If you run into a problem with say Preferences and don't know which one is the troublemaker, just trash the whole pref folder and use the good one from the clone. Font problem, same deal. And, if diaster ever strikes, you can just boot up from your external and keep right on working - fix the internal when you have time.
That's my 2 cents anyway
-mj
[email protected]

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Help with cs3 and fcp -from cs2 and fcp thread..

didnt want to hijack the thread about cs2 and fcp so started a new one
hi, I'm using a proRes 422 file ( mov ) 1920x1080p 23.98fps 16:9. Loads and plays fine in CS3 (custom desktop settings)...but wouldn't mind knowing your project settings for your trial shooternz...so I can compare...
My file is dark and a little flat...so I used levels effect adjustments. However, though it looks way better and exports OK ( hdtv 1920x1080p 24fps) I do see some "noise" now if I freeze the frame...is that common or am I over doing it on the gamma and levels correction ?
I'm just doing hd for the first time really on this machine, trying to figure out what I need in future for machine and upgrade to CS5...so I am going to dissect this file and figure this out til the cows come home so I don't have to deal with problems in future with new machine, etc.
Another thing...I have media info on this saying mpeg-4 ( mov wrapper) video = apcn ..audio = ipcm..
audio 1,536kbps, 1 hz, 16bits, 3 channels, ipcm..
However, there is no sound on the track which loads into audio 4 when video goes on video 1. This was shot with a boom - as I can see a boom shadow in shot during " back to 1 " on the set (when dolly moves back to 1 etc) .... ( sound mixer) so it's possible there is in fact NO SOUND embedded in the video file. Is that common to have a soundtrack appear even if it is empty with proRes ?
thanks...Rod

Wow, not too popular a subject ...this....
Got an update from the man who sent me the prores file...and a little info re: his opinion of adobe coming from FCP...I will share it with you all...
If you are going the Adobe route, I would highly recommend that because Premiere CS5 is a really impressive app when it comes to working with footage and editing. I have recently moved over to the Adobe CS5 Suite because Final Cut is good, but it hasn't been updated in a while....and the Mac is a really expensive alternative to a really good PC.
The color space for the clip I sent over was set for Rec709 HD Colorspace which is meant for broadcast, but on a non calibrated monitor, it will look dark. It usually requires a gamma shift and color treatment (since the clip is uncorrected), but it sounds like you are on your way.
Given the RED work flow, we always shoot raw and make the adjustments prior to rendering. The main reason we use the Adobe Suite is because you can work natively with any footage in the digital work flow.....FCP requires you to transcode everything into a Pro-Res Quicktime and you lose all of the really granular ability to treat the footage in order to get through the edit and color grade.
sooo, new computer will have a broadcast monitor ( just in case one is needed )...
I adjusted my clip by eye, plus vectorgraph etc, (levels and gamma) and it turned out fine...
Rod

Hello, my itunes app is getting shut down every time I want to open it. Ever since I downloaded the last two updates. I tryed repearing the file and uninstalling and installing several times. Still, is not working. I work with music and need my itunes

Hello, my itunes app is getting shut down every time I want to open it.
I don't know if it's related but ever since I downloaded the last two updates. I tryed reparing the file and uninstalling and installing several times. Still, is not working. I work with music and need my itunes up and running. Does anybody know how to fix this?

Hi Vero Torres,
If you are having issues with iTunes unexpectedly quitting on launch after on your Windows machine, you may find the troubleshooting steps outlined in the following article helpful:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Regards,
- Brenden

I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

velma Monreal wrote:
I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?
Yes you can. In iPhoto create a Album with the photos you want in it. You can drag them from your Events folder. In iTunes with your iPad connected go to Photos by cliking on your iPad. You can then select the album or events you want.

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help...............

I want to ask that i have passed my 10th and i am doing diploma in Mechanical Engineering. So i want to work with apple and wants to lean more from them. So how i can this company as a studying student?

I want to ask that i have passed my 10th and i am doing diploma in Mechanical Engineering. So i want to work with apple and wants to lean more from them. So how i can this company as a studying student?

[http://support.mozilla.com/en-US/kb/Managing+file+types]

Will Lightroom and Photoshop CC work with Indesign/Illustrator/etc from older versions of CS installed on my Mac?

if I subscribe to the Photo plan, will Lightroom and Photoshop CC output work with Indesign/Illustrator/etc from older versions of CS installed on my Mac?

I currently have premiere cs4 and cs5 installed and have had no problems. I have noted on the forums here that some people were reporting problems. So the only way to realy know is make the plunge. I'm running win 7 pro.

How can I order an iphone 6 and pick it up from one of the apple stores in London. It doesn't work with reserve and pick up because the 64 gb is never in stock.

How can I order an iphone 6 and pick it up from one of the apple stores in London??? It doesn't work with reserve and pick up because the 64 gb is never in stock.

Thank you for replying. Yes I deleted the old email address..

HT4882 hi apple it's kian ! i have mac book air with 10.7.2 version may keyboard light does'nt work with f5 and f6 ! please help me !

hi apple it's kian ! i have mac book air with 10.7.2 version may keyboard light does'nt work with f5 and f6 ! please help me !

Hello Kian,
This may sound silly but if you put your hand over the isight camera, do the lights change on the keyboard?
Ryan

I don't want Adobe to open up and be selected immediately. I work with iPhoto and Ipages etc and preview which needs to be my main application for my work , but need adobe reader for other files... how can I do this please?

I don't want Adobe to open up and be selected immediately. I work with iPhoto and Ipages etc and preview which needs to be my main application for my work , but need adobe reader for other files... how can I do this please?

loopiloo1 wrote:
I don't want Adobe to open up and be selected immediately.
Sorry, I don't understand this - you don't want Adobe [Reader] not to open when doing what? On what operating system?

Internal table with Import and Export

Hi All,
Hi all
Please let me know the use of <b>Internal table with Import and Export parameters and SET/GET parameters</b>, on what type of cases we can use these? Plese give me the syntax with some examples.
Please give me detailed analysis on the above.
Regards,
Prabhu

Hi Prabhakar,
There are three types of memories.
1. ABAP MEMORY
2. SAP MEMORY
3. EXTERNAL MEMORY.
1.we will use EXPORT/ IMPORT TO/ FROM MEMORY-ID when we want to transfer between ABAP memory
2. we will use GET PARAMETER ID/ SET PARAMETER ID to transfer between SAP MEMORY
3. we will use EXPORT/IMPORT TO/FROM SHARED BUFFER to transfer between external memory.
ABAP MEMORY : we can say that two reports in the same session will be in ABAP MEMORY
SAP MEMORY: TWO DIFFERENT SESSIONS WILL BE IN SAP MEMORY.
for ex: IF WE CALL TWO DIFFERENT TRANSACTIONS SE38, SE11
then they both are in SAP MEMORY.
EXTERNAL MEMORY: TWO different logons will be in EXTERNAL MEMORY.
<b>Syntax</b>
To fill the input fields of a called transaction with data from the calling program, you can use the SPA/GPA technique. SPA/GPA parameters are values that the system stores in the global, user-specific SAP memory. SAP memory allows you to pass values between programs. A user can access the values stored in the SAP memory during one terminal session for all parallel sessions. Each SPA/GPA parameter is identified by a 20-character code. You can maintain them in the Repository Browser in the ABAP Workbench. The values in SPA/GPA parameters are user-specific.
ABAP programs can access the parameters using the SET PARAMETER and GET PARAMETER statements.
To fill one, use:
SET PARAMETER ID <pid> FIELD <f>.
This statement saves the contents of field <f> under the ID <pid> in the SAP memory. The code <pid> can be up to 20 characters long. If there was already a value stored under <pid>, this statement overwrites it. If the ID <pid> does not exist, double-click <pid> in the ABAP Editor to create a new parameter object.
To read an SPA/GPA parameter, use:
GET PARAMETER ID <pid> FIELD <f>.
This statement fills the value stored under the ID <pid> into the variable <f>. If the system does not find a value for <pid> in the SAP memory, it sets SY-SUBRC to 4, otherwise to 0.
To fill the initial screen of a program using SPA/GPA parameters, you normally only need the SET PARAMETER statement.
The relevant fields must each be linked to an SPA/GPA parameter.
On a selection screen, you link fields to parameters using the MEMORY ID addition in the PARAMETERS or SELECT-OPTIONS statement. If you specify an SPA/GPA parameter ID when you declare a parameter or selection option, the corresponding input field is linked to that input field.
On a screen, you link fields to parameters in the Screen Painter. When you define the field attributes of an input field, you can enter the name of an SPA/GPA parameter in the Parameter ID field in the screen attributes. The SET parameter and GET parameter checkboxes allow you to specify whether the field should be filled from the corresponding SPA/GPA parameter in the PBO event, and whether the SPA/GPA parameter should be filled with the value from the screen in the PAI event.
When an input field is linked to an SPA/GPA parameter, it is initialized with the current value of the parameter each time the screen is displayed. This is the reason why fields on screens in the R/3 System often already contain values when you call them more than once.
When you call programs, you can use SPA/GPA parameters with no additional programming overhead if, for example, you need to fill obligatory fields on the initial screen of the called program. The system simply transfers the values from the parameters into the input fields of the called program.
However, you can control the contents of the parameters from your program by using the SET PARAMETER statement before the actual program call. This technique is particularly useful if you want to skip the initial screen of the called program and that screen contains obligatory fields.
Reading Data Objects from Memory
To read data objects from ABAP memory into an ABAP program, use the following statement:
Syntax
IMPORT <f1> [TO <g 1>] <f 2> [TO <g 2>] ... FROM MEMORY ID <key>.
This statement reads the data objects specified in the list from a cluster in memory. If you do not use the TO <g i > option, the data object <f i > in memory is assigned to the data object in the program with the same name. If you do use the option, the data object <f i > is read from memory into the field <g i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
You do not have to read all of the objects stored under a particular name <key>. You can restrict the number of objects by specifying their names. If the memory does not contain any objects under the name <key>, SY-SUBRC is set to 4. If, on the other hand, there is a data cluster in memory with the name <key>, SY-SUBRC is always 0, regardless of whether it contained the data object <f i >. If the cluster does not contain the data object <f i >, the target field remains unchanged.
Saving Data Objects in Memory
To read data objects from an ABAP program into ABAP memory, use the following statement:
Syntax
EXPORT <f1> [FROM <g 1>] <f 2> [FROM <g 2>] ... TO MEMORY ID <key>.
This statement stores the data objects specified in the list as a cluster in memory. If you do not use the option FROM <f i >, the data object <f i > is saved under its own name. If you use the FROM <g i > option, the data objet <g i > is saved under the name <f i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
Check this link.
http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
Thanks,
Susmitha.
Reward points for helpful answers.

Device not working with Log and Transfer in FCP

I am trying to get some footage off my camera into final cut pro, but Final Cut Pro does not recognise my device when I try to use Log & Transfer
The camera is question is a Cannon Legria FS20, here is a link
http://www.canon.co.uk/ForHome/Product_Finder/Camcorders/flash_memory/LEGRIAFS20/
I have looked around but can't seem to find any plug-ins to get it to work with Final Cut Pro, does anyone know any way I can get it to work with Log and Transfer
Upon inspecting the hard drive, it saves video files in .MOD format with an .MOI file (which i assume is a metadata file
How can I get it so that my device works with log and transfer?
Thanks

Hi -
I did a little Google searching for information on your camera and it appears that it is a Standard Definition Camera that records in the MPEG-2 format.
Log and Transfer only works with High Definition material.
You will need to convert your video clips into a format that will work with FCP.
I know nothing about working in PAL, but you want to download an free application called MPEG Streamclip from
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
This application will convert your MPEG-2 files into a format that you can use directly in FCP.
Once you have converted the files to Apple DV-PAL, with the correct frame rate (25fps?) and field dominance you can either simply drag the converted files into FCP or import them using File > Import.
Hope this helps.
MtD

Help needed working with layers and exporting from acrobat3d

Similar Messages

Maybe you are looking for