Help! Network MGMT won't turn on.

Hello,
I read in the documentation that this interfaces default state is set to enabled, however, it is not.
The following command was ran from serial connection. In an attempt to turn on the interface.
"set state=enabled"
It returns "set: command failed".
Oddly enough running the command to disable the interface "set state=disabled" seems to succeed. Its output is as follows.
"Set 'state' to 'disabled'"
This is a brand new Sun Server X3-2(Sun Fire x4170 M3)
Does anyone know what I am doing wrong here?
I'll also note that if you setup the interface from Oracle System Assistant it will work, but that is an extremely long a tedious process compared to using the com port.
Thanks for reading!

Hello,
I figured it out.
This was due to ipv6 being set enabled.
cd ipv6
set state=disabled
Then I could go back to /sp/network/ and enable the interface and configure it.
Sorry, guess I just needed a second to think. Sometimes Google doesn't have the answer.

Similar Messages

HELP! Ipod won't turn on, isn't showing up in iTunes or computer!

I finally got iTunes 8 to install today (yeah!) and bought some stuff for my new iPod Nano 8GB (previously had a 2GB 2nd Gen) Some games and music videos. Worked beautifully. When I hooked it up to my computer to add one more game before I left (last minute purchase lol) iTunes said a newer version was available for my iPod, did I want it to install. I said yes, and now it won't work. At all. It won't turn on at all, hooked up to my computer or not, it isn't recognized anywhere on my computer. If I uninstall iTunes to re-install, will I lose my library? Will that even help? I can't do the five R's, cuz the thing won't turn on! What happened??? I need help

brand new ipod less than 2 months old, occasionally it will crash and the apple logo would come up or the songs would skip but as soon as i turned it off and on it would be fine. today i tried to use it but it wouldnt turn on so i assumed it was flat, plugged it in to my speaker dock, nothing, plugged it into 2 computers and nothing, what can i possibly do to fix it?

Please help iPhone 4S won't turn on!

Okay so this all happened months ago when ios7 came out. I tried to update my iPhone 4S software straight off of my phone in the settings to ios7 and it wouldn't work. So than I hooked my iphone up to my computer and went on iTunes and tried to update from there manually. Everything was working it said like 95% done updating but than it said this operation can't be done. Now, my iphone won't turn on, it goes to the connect to iTunes screen, but i don't know what to do I tried to connect it to iTunes and it didn't turn on. Please help I need this iphone to turn on!

Assuming your phone was never jailbroken, try the following:
Install the latest version of iTunes on your computer if it isn't there already from apple.com/itunes
Reboot your computer
Connect the phone to a USB 2 port directly on your computer, not to a USB hub. If it is a desktop or tower computer use a port on the back, not on the front
Disable your antivirus and firewall
Launch iTunes
Connect the USB cable to the computer, but not to the phone
On the phone hold the HOME and SLEEP buttons for EXACTLY 10 seconds, then release the SLEEP button but continue holding the HOME button - if an Apple logo appeared you held too long; the screen should be black when you release the SLEEP button.
While still holding the HOME button connect the end of the USB cable to the phone
Wait until iTunes acknowledges the phone, then release the HOME button.
The phone should now restore. If it doesn't note the error number and post back.

PLZ Help. PC won't turn off because of EAX Mod

Help! Ever since i installed my X-Fi Fatalty, when I go to turn my computer off, it says now ending EAXModule. After that, the computer won't turn off, but I can't do anything because it says the window station is shutting down. It is very annoying because all my settings aren't saved and I have to turn the computer off manually.
My system:
Athlon 64 4000+ OCed to 2.64 GHz
Asus A8N32-SLI Deluxe
2GB Kingston Hyper X
2 MSI 7900GT's in SLI
50GB Western Digital Raptor
Creative X-Fi Fatalty
Antec 550 Watt PSU

I'm also having a similar problem now, however, if I wait a minute or two the system does shut down. I'm using an ASUS M2N32 WS Professional board, with the my X-Fi Platinum card in the second PCI-X slot; I couldn't get it to work at all in the board's one PCI slot, and the first PCI-X slot has my RAID card in it (Areca ARC-0). My GeForce 7900 GTX is in the second PCI-E slot, since it's too big to fit in the first and leave room for the RAID card.
For all that, the sound card, video, everything seems to work perfectly except for this problem with the EAX module at shutdown. It's very annoying. I've tried stopping CTDetect from running at startup, I've tried completing the registration. Nothing seems to work, but I want my Creative applications. Any ideas?

HELP, My MAC won't turn ON

My computer won't turn on. When you hit the power button you can hear the fans turn on but thats about it. This has happened in the past, it's not turned on for about 3 days but then all of sudden it starts working again. Its been about 5 days now and I'm starting to get worried. I hear the fans running but thats it, I can't eject the CD tray and I can't see any video. What should I do??
iMac g4 Mac OS X (10.4.5)

CDiddyHustle,
Welcome to Apple Discussions, Sorry about the circumstances!
To help identify what's at fault could you please post back with the following details:
Do you get the Start-Up chime?
Does the Optical Mouse light up/Caps Lock light come on or off?
If you shine a torch at the display and look closely can you see any images?
If you have a VGA display adaptor - can you see any display if you plug it in to your TV or similar.
If you reset the PRAM - hold down the <apple>
<r><alt>keys in during start-up until you hear the computer appear to restart.
If you hold down the mouse button during start-up does the CD tray open?
Was the computer showing any other symptoms recently - dimming display, Kernel panics, poor USB connections, grinding noises in the hard disk?
Do you have a clean electrical supply in your part of the world?
mrtotes

Help! Ipod won't turn off after disconnecting

Okay I've had my Ipod nano for like 3 weeks. I've used it once. It worked fine when I first got it and after my battery ran out I haven't used it for about a week. When I got it back I hooked it up to my computer and updated the stuff on it as well as let it charge. After is says to safely disconnect, I disconnect it but it automatically turns off and won't turn back on. I've tried resetting it and nothing works. I thought the battery was dead but I've left it plugged in (not only USB on my computer but also tried an outlet) and it never completely charged. I've even left it plugged in overnight (well over the 4 hours it's supposed to charge). I have no idea what to do (It also took like at least a full day to completely charge the first time I've had it)

for instructions on resetting http://www.apple.com/support/ipod/five_rs/

HELP, my iPod won't turn on or charge, any suggestions?

I have an iPod mini and it recently would not turn on or charge, I would sincerely appreciate any suggestions.

Try these.
My iPod won't turn on.
iPod battery doesn't charge.
My iPod won't wake up.

Help! Phone won't turn on after ICS update

So I just updated my phone a few hours ago. I looked down at it to see if it was finished and noticed it was off. When I tried to turn it on it wouldn't power up. I've had it on the charger for an hour now. When it goes on the charger, the red Motorola insignia comes on the screen but nothing happens after that. My phone may have died during the upgrade so that could be the problem. I've reset it about 10 times and it still won't turn on. Any suggestions???? I had a baby a month ago and would be devastated if I lost my pictures.

Jess i can tell Ya is Hook your Razr up to the Charger and Leave it on there for about 3 Hours Maybe 4 and then with the Charger Hooked to it Try to Restart it.. if you Can See were your at on the Download it Takes about 15 Minutes for the Initial Download then the Phone Will Power itself but should Come Back on and Finish the Rest of you Will see the Little Android Character And Below it A Rectangle box and you should see another Bar in Yellow moving across it. When that's Finished Give it some Time and it Reboot itself and then Update you Apps then it should Finished After That.. But hopefully By leaving it on the Charger for a While Will pull it out of the State it's in Now..

Help! Phone won't turn on!

This morning I updated 3 apps, CoolIris, Yelp, and ESPN World Cup and afterwards, after trying to start Cooliris my Iphone 3G shut down by itself. I tried to turn it on, either by holding down the power key or the power and home key at the same time but both yield the same result: the phone turns on and I get 35 seconds of the apple logo on the screen and then turns off again. It doesn't go any further in the boot process. When hooked up to my laptop, it is not recognized by Itunes. Any suggestions?

Take a look at these basic troubleshooting steps and see if one of them helps.
http://support.apple.com/kb/HT1737
If that won't help, you may need to put it in Recovery mode. Use this link for that.
http://support.apple.com/kb/HT1808
Message was edited by: ChrisJ4203

Help - MacBook Pro won't turn on

Help - my macbook pro will not turn on even though it is plugged in. Holding down the power button is ineffective. The power cord has the green "charged" light, but when I plugged it in, it wasn't charged and never did charge (the light never was orange). The computer worked perfectly this morning.

Will it not turn on at all or do you just get a gray screen?
If a gray screen, look at this:
https://discussions.apple.com/docs/DOC-5282
If it does not turn on at all, try a SMC reset:
http://support.apple.com/kb/ht3964
If the reset fails to bring life to the MBP, make an appointment at an Apple store genius bar for a free evaluation.
Ciao.

My iPad2 quit connecting to wireless network. Won't turn on, won't search for networks, no connection

A couple of days ago, my 1 month old iPad2 quit searching for wireless networks, won't recognize my home network, and the wi-fi connection won't stay on. I can switch it on, but it doesn't do anything (won't search for wifi) and as soon as I move away from that window, it switches back to "OFF". Anyone have a fix for that, or is it a problem that can only be resolved with returning the product for repair or replacement?

If no change after resetting network settings on your iPad and/or after restoring your iPad with iTunes as a new iPad or not from the iPad's backup, your iPad has a hardware problem.

HELP! Droid won't turn on

I've had my Droid since January (it's now October) and in the past maybe 2 months it has started "freezing" on the black screen or turning off on its own and would only restart with a battery pull. This morning I got up to find it frozen in this black screen state but even with numerous battery pulls, trying to plug it in just in case it had died over night, and more battery pulls, it refuses to turn on!! What is wrong with my phone and what do I do about it? I can't go around with no phone waiting for a replacement, if they will even cover one. Has anyone else had this problem? Please help!

This is a system error in the phone. Once you perform a factory reset it should resolve the problem. The steps are listed below:
1. Hold Home Button and press power (continue to hold until you see the triangle with an asterisk like in step 2)
2. Screen will show a Android with a triangle with asterisk
3. Let Go of Home Button and Power
4. Press Search Button (Far Right Button)
5. A blue menu will show at top of page, scroll to Format Device
6. Select Yes to verify
7. Allow format to complete (Information at bottom of page will go through a few steps)
8. Once Format is complete Blue Menu will show at top again, select Reboot
9. Sometimes phone hangs after reboot and will take a while but if no response after 5 - 10 minutes, pull the battery and reinsert. (Device usually starts fine after this)
Your contacts are automatically backed up by Google and Backup Assistant so the only thing you will lose are you email accounts.

Please help motherboard(s) won't turn on

After this story: https://forum-en.msi.com/index.php?topic=161402.0
I know it was an asus, shame on me. I returned the Asus, and the pins were bent I believe in transport so no warranty and bought a new MSI Z77A-G45 motherboard. Assembled the system again. Still no luck
Action for 200ms en then dead again.. I was fearing for the pins on the motherboard, I thought maybe I'm an idiot and Im doing something wrong with connection the cpu. But the pins are not bent so that's not it. I removed everything just a bare board. Plug in the power supply and nothing. Same problem.
I don't believe all these boards are DOA. The changes of that are so minor. All I could think of next is the PSU. I connected the PSU to an older system boots just fine. Also just tried another PSU on this new motherboard.. same problem tries to go on but fails imminently.
I googled and saw that like I thought a motherboard without a cpu should atleast go on, and maybe beep that the cpu is missing. But it should turn on. In my case it doesn't.
Also when I plug the extra 4 pin next to the 24 pin connector on the motherboard it won't go on at all. Nothing nada, remove the 4 pin and it will try for a split second and die. (like stated above)
I'm totally lost in this and I humbly like to ask some advice. I know in my last topic I've been a bit harsh and msi bashing.
Btw, the supplier tested the first MSI board and found it dead as well. So somehow I dont think these problems are connected to the first MSI board.
THANKS for your time/input!

Quote from: xmad on 04-September-12, 07:55:21
With all due respect, have you read through the manual that came with your motherboard?
If it wasn't included with your motherboard it can be downloaded here:
http://www.msi.com/service/download/manual-18064.html
Refer to page 25 in regards to Jpwr1 & Jpwr2
Re-install the mobo into your case after counting the stand offs and comparing them to the holes in the mobo after refering to page 24 of the manual.
Install 2 sticks of ram for dual channel operations as seen on page 26 of the manual.
Install your cpu and hook up BOTH jpwr1 & jpwr2 make sure you hook all 24 pins ups
Then hook up the case connectors (page 35-40)
Try to start it at this point/ w/o the discrete vga and let us know what happens. At worst with a bad cpu, it will spin up for a moment and enter a boot loop.
Ofcourse this isn't my setup as I started. I had it all wired up and connected. Inclusing memory, vga, ssd etc. But it wouldn't start, and from that point you start removing part after part to get to the point where it will start. In this case it won't.

Help:my ipod won't turn on

I was playing around with my 4th gen iPod the other day when I hit a series of buttons that caused it to freeze.
(I think it was the skip song button while it was in the mode that let's you skip to a part of a song and paused)
I tried doing the reset sequence by holding down the select and menu button. I then tried the play and menu button. No matter what I did, the screen stayed frozen.
After about 5 minutes, I gave up. Since the backlight was on, I figured I'd just let it drain its batteries and reset itself.
Well... I came back to it yesterday and now the iPod won't work. When I plug it into the charger, I see the apple logo appear for about 1 second and hear the HD starting to spin, but then it shuts itself back off. This happens when I try pushing the menu button unplugged, pushing the menu button pluged, or simply plugging it into the power supply.
I tried leaving the iPod charging for about 4 hours. When I came back, it behaved the same way.
What can I do now? Did the iPod really destroy itself because I hit the skip-song button at the wrong time?

i have a 60G ipod video and it is doing the same thing. I had just connected it to my PC and transferred all my music and videos, and then the computer made the sound when something is disconnected from the USB drive. And i looked at the ipod and it comes up with the Apple boot screen, then makes a few clicking sounds then shuts off, then does the same thing again. It's been constantly doing this for the last 20 minutes....
I can reset it using the centre and menu buttons, and the screen goes blank, but then it just starts doing the same thing a few seconds later...
i only just got this ipod this morning and already it is stuffing up.... any help?

HT1338 HELP my speakers won't turn on and the volume is greyed out!

iTunes randomly crashed... hard.
I hard rebooted my computer, and now my speakers won't play any sounds.
when I press the volume keys, the logo for speakers is greyed out, and there is a circle with slash to indicate not allowed.
My volume bar in the menu bar is greyed out as well.
What in the name of all things holy is wrong with it and how can I fix it?

I have gone into the sound settings, and my options for output are the internal speakers, and the audio aggregate device, neither of them work.
I have also tried plugging in and pullin out headphones to no effect, and whenever there is headphones inside the jack, the same lack of volume/ volume options happens.
I even tried resetting the special Rama by restarting and holding command+ alt + r + p, and. It made the startup spud, and nothing else.
If someone could help me, I have a gig in a week, and this is not something I really have the time to deal with.
Thanks.

Help! Network MGMT won't turn on.

Similar Messages

Maybe you are looking for