HELP! Network printing and installing HPIJS on iBook running 10.3.9

Hi,
I have a home network built around Time Capsule. I have a secondary router which provides a wireless B/G network.
I have an old iBook running 10.3.9 which connects to the wireless B/G network.
I used to have an old HP PSC 750 connected via USB to the time capsule but it broke so I bought a new HP Photosmart C6380 which is connected via an ethernet cable to the time capsule.
I was able to use open printing drivers to allow the iBook to print to the old printer but I cannot get it to print to the new one.
Everything else on the network can print (including my iPhone).
I went back to open printing (http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/hpijs), downloaded what I had to and tried to install it. Everything installs ok on the iBook.
The trouble is I cannot follow the setup instructions - "Printer Setup Utility (Panther), hold down the Option key, and click the Add Printer button in the Print Center toolbar. Within the setup sheet, choose Advanced from the top popup menu; then in the "Device:" popup menu select your printer by name (it should be the last item in the menu list). Finally, select the correct PPD from the model browser and click Add."
The printer shows up when I select rendezvous in the add printer section, but it cannot find the drivers and will not let me select the drivers.
When I follow the above instructions, the printer is not listed.
I have tried using IP printing (no luck), bluetooth printing (nothing), in fact everything from the pull down list.
I am sure I am missing a step somewhere. Should I first install the printer connected directly to the iBook via USB?
If anyone can help, it would be much appreciated.
Thanks
Anthony

Hello Penny
The Leopard Installer DVD is Dual-Layered. For lack of any further information it's possible the original installed Optical Drive on your eMac can't read from Dual-Layered DVDs? Yours may be the Combo Drive instead? Although your model meets the minimum RAM requirements you would benefit greatly if you upgraded to at least 1GB - preferably more. Do you have another Mac or access to someone who has?
HTH?
Tony

Similar Messages

How do I use the filter to automatically print email and .pdf, .xls, .doc attachments to my default network printer and to other network printers

I receive sales orders by email. I want to filter some to print on my default network printer and others to print on another network printer. The email body must print as well as txt, .pdf, .xls, .doc attachments.

You can filter messages to file them to a certain folder, but I don't think you can have Thunderbird to automatically print them.

How do i get help in downloading and installing PE 12 and Premier 12 on Win 8.1?

how do i get help in downloading and installing PE 12 and Premier 12 on Win 8.1?

Try using another browser if you are having a problem getting the interface to react properly to your interaction with it. If you need more help, preovide more information regarding what you experience when you tru and it fails.
Please don't start multiple postings for the same problem - your other posting provided better information.

I need help in downloading and installing a previously purchased version of Photoshop Elements 12: AD012822594 1057-0247-4177-3303-6451-8067 or 1057-0904-6949-7119-8323-9165

I need help in downloading and installing a previously purchased version of Photoshop Elements 12: AD012822594 1057-0247-4177-3303-6451-8067 or 1057-0904-6949-7119-8323-9165

Please do not share serial numbers or Order numbers on Forums . Serial numbers and order numbers are very confidential.
You can only share serial number with Adobe Customer support staff.

I need help in downloading and installing a previously purchased version of Photoshop Elements 12: Serial number removed by moderator

I need help in downloading and installing a previously purchased version of Photoshop Elements 12: <Serial number removed by moderator>

Hi There,
Kindly try: Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows
Thanks,
Atul Saini

Is there any method to use network printer without installing driver?

We have some embeded win7 devices which we cannot install drivers to.
Is there any method to use network printer without installing driver?

Hi,
Please read the following article:
http://en.wikipedia.org/wiki/Device_driver
You definitely need this middle man.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Is there any methods to use network printer without installing driver?

We have some embeded win7 devices which we cannot install drivers to.
Is there any methods to use network printer without installing driver?

Hi,
Please refer to your other post:
http://h30434.www3.hp.com/t5/forums/replypage/board-id/Printing/message-id/77319
Thanks.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Desperately need help with a networked printer and SMB sharing for windows

Complete xServ newbie here. I'm a windows/novell admin, with limited experience in Unix and Linux.
Against my advice, a client of mine that owns a small office of 20 people bought an XServG5 to act as a server for 20 mixed Windows PCs. File sharing services are working fine. I've created the users, set up groups and rights - that's all good.
I cannot get an SMB shared printer to work from the windows machines. They run through the network printer install just fine, it shows up online, etc. However, when print jobs are submitted they DO show up in the printer queue on the server, sit there for a while, and then get moved to the completed box.
They never print. There's not any indication that the job is even submitted to the printer. I can print to the printer just fine from the server itself, but the windows clients don't work, but they don't return an error message.
Print services are running on the server, I've configured the printer name to be less than 12 characters for the share, and indeed it does pop right up during the "add network printer" routine.
Ideas? I'm not even sure what questions I'm supposed to be asking, such is my ignorance of the OS. I do know that I followed the documentation to a T, and according to Apple this should work.
Thanks in advance for the help. I'm extremely frustrated.

We have the same problem. Our printer worked for about 2 years but failed similar to yours after a system update.
Can you go into the Windows service, Logs, Printer Service. Copy and paste the log here. What I am looking for is a line like lpr: CANNOTCONNECTCLIENT or something similar to this.
What I expect is that you have a problem where the cups defined printer is not usable. We can't get our problem fixed either - but am just curious if you have the same thing. We reloaded our server, applied all of the update and still cannot get it to work.
Again, I think it stems from the update.

Installing network printer and downloaded print drivers aren't recognized.

I downloaded drivers for the Canon ImagePRESS C1 and they seem to install just fine. However, when I install the network printer the driver is not listed anywhere. Even when I choose "Other" and point to the device folder the files are greyed out, and I can't select the driver. I've tried updates and resetting the print system an still no success. Any help would be greatly appreciated.
drh08

There are three printer options (at least here in Oz there is) available for the imagePRESS C1. There is the internal Canon printer board and two external print controllers - the imagePASS-T1 and the imagePRESS-Q1, which is what we have connected to our C1. Each of these print controllers have different drivers so you need to determine which one you have first. If you are not sure, then check with someone or have a look at the C1. If it has a white metal box hanging on the back of the copier with some network cables, then you have the T1. If there is a PC case connected to the copier then you have the Q1. If the network cable connects from the wall straight to a network card on the back left side of the machine, then you have the internal Canon board.
For the two imagePASS controllers, you can download the driver from the print controller, by opening its internal web page (type the copiers IP address into your web browser to access). These queues for these drivers are added via IP > HP Jetdirect-Socket and you should find the driver by searching for either T1 or C1 in the Print using menu.
If you have the Canon board, then how you create the printer queue depends on which driver you have downloaded. Could you tell me the driver name and version so I can explain the method of adding the printer queue.
PaHu

T61 / Finding Networked Printer to install on laptop.

I'm trying to install a network printer on my laptop that is ethernet wired to my router. I'm trying to install the networked printer on my laptop, but cannot get the software to see the printer on the network. It can't seem to find it. I spoke with HP and they didn't want to change settings on laptop, suggested IBM support. Lenovo offers no support as it's over 1 year. Any thoughts - ? They think that it could be a firewall that's blocking the laptop from seeing it. We disabled windows firewall and norton, to no avail ? HELP ......ideas are welcome.

What operating system do yoyu have installed on your T61?
Its not clear from your message what is "wired" to your router. Are you connecting your laptop to your router via wired Ethernet connection, or are you connecting via a WiFi connection?
Cheers,
Bill
I don't work for Lenovo

Can I set up a wireless printer as a network printer and not use Airport?

I have a HP Photosmart Plus wireless printer set up in my network for use by several iPods, iPads, and iPhones. I have an iMac running 10.6.8 that I want to set it up on, but to use it as a regular network printer, not using Airport. Is this possible? I haven't been able to hit on the right combination of settings. I have a Samsung laser printer that works this way, and an Epson that is attached to an Airport Express, but all I get on the HP is garbage. It will work when I set it up using the HP install disk, but I have to use Airport and I don't always get a good signal where the iMac is located. I would prefer to use the wired connection to my router and access the HP's IP address, like a wired network printer. Any suggestions?

I'm using a Canon printer here which is networked via my Airport Express. My printer cannot be Wi fi enabled simultaneousely with an ethernet cable connection. It is either or. I realise that this doesn't fully answer your question, but I just wanted to give you a clue. You'd need to consult your owners manual, or HP to get a definitive answer.
If you want to use the HP printer printer only with the wired ethernet connection to your router, that should be no problem as long as it is ethernet capable.
After setting it up for wired ethernet capability, you will need through the sequence of powering your router down, and resetting you Lan network so the router and printer can pick up their respective IP assignments.

HP 950C network printer and windows 8.1

I have an HP950C printer that is usb connected to my desktop which runs XP. This printer was used on my network by my old laptop which was also XP. I now have a new laptop with Win 8.1 and the printer will not work unless I hook it up via USB. The error message is that there is no driver installled. I downloaded a driver and nothing changed. My HP disk isn't recognized by my laptop with Win 8.1. Is there a problem with getting it to work on the network because I have two different operating systems?
This question was solved.
View Solution.

Hi 080842,
Since your printer is USB only, one of the computers on your network will have to be connected to it by USB and then share it over the network. So the issue really is how to get Windows XP and 8.1 to share resources over a network.
The drivers for the 950c are in Windows already so no disks are needed.
These instructions are written for Windows 7 and XP, but they should work for Windows 8.1 and XP.
You will not need the step 5 as the driver for this model is built into Windows.
Step one: Windows 7 Homegroup must be setup
Printer sharing must be setup in the Homegroup settings, if one of the computers in the network is using Windows 7.
1. Click Start
2. Click Control Panel
3. In the upper right corner ensure that View by has Large icons or Small icons selected.
4. Click Network and Sharing Center.
5. Click Choose homegroup and sharing options
6. If the Homegroup is not setup, you need to set up your homegroup before continuing.
Step two: Set the Workgroup on each computer
Each computer on the network must be set to the same Workgroup. The workgroup name needs to be changed from the default to a new name.
Windows XP:
1. Click Start.
2. Right click Computer and then left click Properties.
3. The default Workgroup is WORKGROUP.
4. The name of the Workgroup should be changed from the default.
5. In System Properties, click the Computer Name tab.
6. Click the Change button.
7. Enter the Workgroup name that is used by your entire network. If you are changing the Workgroup name, use the same name used in Windows 7.
8. Click OK.
9. You must restart your computer for the change to take effect.
Windows 7:
1. Click Start.
2. Right click Computer and then left click Properties.
3. The Workgroup is listed in System Properties.
4. The default Workgroup is WORKGROUP.
5. The name of the Workgroup should be changed from the default.
6. Change your Workgroup in Windows 7 by clicking Change settings.
7. Click the Change button.
8. Enter a new Workgroup name that will be used by your entire network.
9. Click OK.
10. You must restart your computer for the change to take effect.
Step three: Setup a share account on each computer in the network
Create a common share account on each of the computers, including the computer that is sharing the printer to the rest of the network. This share account must have the same name and password on each computer.
If you decide to use an existing account that appears on each computer all ready, this existing account must be password protected. If you do not want to password protect your default login, create a new share login as described in the following steps.
Windows XP
1. Click Start
2. Click Control Panel
3. Click User Accounts
4. Click Create a new account.
5. Enter the same user account name created as the share account on the Windows 7 computer.
6. Click Next.
7. Under “Pick an account type”, select ‘Computer Administrator’.
Note: In Windows XP you must select Computer Administrator in order setup a printer.
8. After you new account is created, select it under ‘pick an account to change’.
9. Click Create a password
10. Enter the same password used when creating the share account on the Windows 7 computer, following the directions on the screen.
11. Click Create Password button.
12. Log off your current user account and log into the new share account to activate it.
13. Once the computer is ready after logging into the share account, you can log off the share account and back into your regular user account.
Windows 7
1. Click Start
2. Click Control Panel
3. In the upper right corner ensure that View by has Large icons or Small icons selected.
4. Click User Accounts
5. Click Manage another account
6. Click Create a new account
7. Select Standard User
Note: The account created should be created with the lowest security setting necessary. Creating the share account as an administrator is discouraged.
8. Enter a new user account name. Use a name that is easy to remember as the account used for sharing resources across your network. For example: ‘ShareAccount’
9. After your new account is created, select it under “Choose the account you would like to change”.
10. Click Create a Password
11. Enter a new password, following the directions on the screen.
12. Click Create Password button.
13. Close any remaining opened windows, making a note of the new account name and password as you will need to create identical accounts and passwords on the other computers on your network.
14. Log off your current user account and log into the new share account to activate it.
15. Once the computer is ready after logging into the share account, you can log off the share account and back into your regular user account.
Step Four: Share the printer to the network
The computer that has the printer attached and installed by USB must have the printer shared to the network.
Windows XP
1. Open the printers and faxes folder in Windows XP.
Note: A hand symbol under the icon for the printer indicates it is all ready shared to the network.
2. Right click on the printer to be shared to the network.
3. Left click on Sharing.
4. Click “If you understand the security risks but want to share printers without running the wizard, click here”.
5. Select “Just enable printer sharing”.
6. Click OK.
7. Select “Share this printer”.
8. If the Share name is acceptable, click OK.
9. If you want to change the Share name, enter a new name. Click OK.
Note: If the Share name entered is longer than 8 characters, you will get a warning that the printer will not be accessible from MS-Dos computers.
Step five: Install the appropriate software for your printer
Install the printer software on the other computers on the network that will need to access the shared printer. Install the correct driver for the printer model for each computer on the network.
1. Check for available drivers – visit the HP website and download available drivers.
Note: Even if you have an install CD for your older HP product, there may be an updated driver for your printer.
2. Launch the driver setup by double-clicking on the downloaded driver.
3. If the driver install process requires you to attach the printer USB cable to continue, click cancel instead. This will roll back the install, but it will leave the driver files installed.
4. Select the USB connection type. Look for the checkbox labeled “Connect later – Do not connect to the printer now. I will connect it later”.
Note: You might have to select USB connection type before the checkbox is visible.
5. Complete the install without attaching the USB cable.
6. After the software is installed, delete any icons created on the desktop. They will not be linked to the shared printer and will only result in errors if used.
Step six: Install the shared printer.
Note: Computers that are not sharing a resource to the network may not show up by name when viewing the entire network.
Windows 7
1. Click Start.
2. Click on Computer.
3. In the lower left pane, click on Network.
4. Double click on the computer that is sharing the printer.
5. Enter the name of your share account as the “User name”.
6. Enter the same password created for the share account.
7. Check the box labeled Remember my credentials.
8. Click OK.
9. Right click on the printer, left click Open.
10. Windows will find the previously loaded driver for the printer and complete the install.
I was an HP employee.
Please mark the post that solves your problem as "Accepted Solution"

Network printing and Indesign cs3

Since updating to 10.5.3 network printing has not worked with indesign cs3. We are now using 10.5.4.
It worked with 10.4.x on the same network. I don't think the printer or the printer driver is the problem but if it matters we are using an hp deskjet 940c. Driver for the printer was updated in February when we purchased the macbook pro we are using.
I've read a bunch of stuff on this and given that it works in 10.4.x with the same printer, drivers, and application program, I'm forced to conclude the problem lies in the OS which is the only difference.
Any help you can give would be appreciated.

Hello Rich,
Can you explain how the printer is networked. Is it shared by another or does it have its own ip address? (Don't know the model so sorry for the question)
If it is a standalone networked printer, what connection method (protocol) do you use for the printer queue?
Are you able to print from other applications?
Can you post the last 10 entries of the cups error log. You can find this by opening the printer queue, clicking the work Printer in the menu bar and selecting 'Log & History'.
PaHu

Help connecting printer and tvs on WRT54g v8

I recently reset my router and settings. My laptop is connected to the internet via wireless, with no problems. However, I am trying to reconnect my wifi printer and tv's, and they will not connect. They pick-up the network, but they say they cannot connect to the access point, or the passphrase is incorrect.
I have tried to look at the network settings on my linksys easyadvisor, but it is mostly blank or n/a, which it never was before. When I go to 192.168.1.1 it shows the correct passphrase. I have no idea what went wrong here! If someone could please help!

Connect the computer to the router with the Ethernet cable. Open the Linksys router setup page.
Go to Wireless tab and click on Wireless security sub tab. Make sure that you have the correct network key/passphrase.
Go to Wireless MAC filter sub tab and make sure that it is disabled.
Try to connect to the wireless network and see if that works.
Make sure that firmware on your router is upgraded to the latest.

Why do I lose network connection with my standalone networked printer and have to reinstall it

I have a Laser Jet MFP M1530 printer that loses connection with the network. All the computers on the network have to delete the old configuration of the printer and reinstall it prior to it working. The printer is in a standalone configuration. Everything else on the network continues to work.

The Laser Jet MFP M1530 is a commercial product. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
You may find the Laserjet board here.
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

HELP! Network printing and installing HPIJS on iBook running 10.3.9

Similar Messages

Maybe you are looking for