Help Network Startup delay

Hi,
About a year ago we upgraded most of our computers from 10.3.9 to 10.4.x. Ever since then there is a 30 to 40 sec delay at startup before the Network initializes. This issue is only present in 10.4.x and it happened the 1st day we upgraded to 10.4.x. It does not happen on either of the two remaining 10.3.9 machines.
Basically, on the 10.3.9 machines the Network is available (I can surf the net and mount Network volumes) as soon as the Desktop finishes loading. On the 10.4.x machines, there is a 30 to 40 second delay between the time the Desktop finishes loading and when the Network is really available to surf or Mount Network Volumes.
I have opened the Network Preference and before our Network is really active (so I can Surf the Net) I have a valid IP Address and the Green Light is lit, indicating that the Compter thinks it has a valid connection, even though it doesn't. This has happened on every version of 10.4.x we have used, all the way up to and including 10.4.9.
We were using a 4 year old Router up to about 3 weeks ago, so I was hoping that upgrading the Router might help this situation, but it didn't. Even our Network with the new Router has the same problem.
Has anyone run into this before? Any suggestions?
Thanks
Kalagan

I am in the process of updating the Firmware on our Cisco Gigabit Switches to see if that will help.
Just an update
Kalagan

Similar Messages

  • My iMac tries to connect to old network startup

    Greetings,
    When I start up, I receive a message that my computer is trying to connect to the my old iMac, the one that I used with Migration Assistant to transfer files and such. That computer is no longer around, but the new one always searches for it.
    I have looked in Startup items, Airport preferences, recent servers in the Connect to Server part of the Finder, and found that there is an icon for "Network Startup" with a ? that I assume is the culprit. However, there is no obvious way to delete or cancel this.
    I checked the following discussion threads for answers:
    https://discussions.apple.com/message/13272616#13272616
    https://discussions.apple.com/message/5317530#5317530
    There were many useful suggestions, but so far no luck. There might be more out there, but I have been looking for a while now.
    Any help would be much appreciated.
    Thanks
    Ken

    Look in System Preferences > Accounts > Login Options > See if there is a Network Account Server defined.  If so, remove.
    Sounds like it's looking for a remote boot option.
    Regards,
    Captfred

  • Starting up in Network startup

    Can anyone explain to me exactly how network startup works and how to do it. when I clicked on it and clicked restart it didn't do anything. So I highlighted network startup and clicked the lock to prevention of further changes and restarted from the apple menu thinking it would start in network mode since the option was locked in but still nothing. can anyone help?
    24'' iMac - 15'' MacBook Pro   Mac OS X (10.4.8)   (iPhone in JUNE!!!)

    When the computer's startup disk is set to start up from a disk on the network, it will attempt to connect to a Mac OS X Server or other system which has an available NetBoot image. If you change the startup disk and then close the padlock immediately, System Preferences may not be able to properly write the setting; you need to go to another pane, or the main screen, or quit System Preferences to save the changes first if you will be closing the padlock.
    (20419)

  • Network Startup - how do i escape this

    Hi,
    My wife set my computer into "Network Startup" mode. You know using the Startup Disk control panel. Now my computer sits at startup waiting and displaying a globe.
    How do i get out of this mode?

    Hi threebean,
    First, when you post for assistance could you please indicate which Mac you have and which Mac OS you are running.
    Shut down your computer by holding down the Power Button for about 5 seconds, til you see a black screen. Now, grab your system restore disk. Now, press the Power Button, hold down the C key and insert the system disk all at the same time. Keep holding down the C key until you see the Apple logo.. An Installer window will open. Go to the top of the Menu and click Utilities/Startup Manager... don't freak, you are doing this from the system restore disk, not the internal disk, so when the Startup Manager window opens, it should populate your start up volumes. Click the one that says: MacintosHD 10.x.x (You won't see x's.. you'll see the Mac OS version. Now, click Restart... that will Restart your Mac from the internal drive.
    Carolyn

  • HELP networking & file shareing with FCP!

    Greetings! I am producing/editing a low budget (low level of experience) documentary and I'm trying to build a network where multiple users can edit off of a single hard drive array. Currently, we have a two Lacie firewire drives (1.5 TB in total) connected to a G5 via fw 800, connected to a 1GB switch via cat 6, then connected to multiple G4s.
    We have tried using OSX's built in networking devices, and additionally have tried using “NFS” via a Linux server. Both attempts were unsuccessful for the multiple G4s. We can load the project (at a painfully slow rate), and play a clip, but after only a few seconds, we get dropped frames.
    Can anybody help networking FCP to multiple workstations via a 1GB CAT 6 Network? Fibre is currently not in the budget.
    Does anybody know the "fastest" way to make a G5 function as a server?
    Thank you!

    After hours upon hours of playing around with my 1GB ethernet, I WAS able to get it to work! It has to do with the way final cut manages it's project file.
    The solution was to copy the project file off of the master computer onto the terminals, and reconnect the media from there. Previously I had been importing the clips, or using a project file already on a terminal... etc.
    Last night I had 3 different computers running (one of them on 10/100) sequences off the same media with no problems.
    Thanks for the reply!
    J

  • Wicd works, network startup scripts don't

    Title tells the story.  Using wicd-1.7 I can connect to wireless networks and the connection remains stable.  Using various combinations of rc.conf settings, netcfg, /etc/conf.d/wireless getting a connection is impossible at boot time and problematic after boot.  The problem occurs on every system I've tested arch on.  Wicd works, network startup scripts don't or only occasionally if some magic spell is properly cast.  I'm positive I've configured the settings in rc.conf correctly as I've been able to connect using those by some combination of rmmod WLAN_MODULE, modprobe WLAN_MODULE, /etc/rc.d/network restart or netcfg ESSID.  The requirement is that I am willing to go through the sequence multiple times. 
    I have just started testing arch and don't know if the network scripts worked before, but I assume they must have.  Were there changes in the network startup scripts recently?  I'm seeing many topics in the forums related to wireless problems.

    When I say that netcfg ESSID works after startup, I mean that it  works sometimes and that net-auto-wireless failed along with all other options that had the wireless start during boot.  I'm not sure which version I tried but this was a new install in December or January and I was ready to remove arch by the end of February.  A new version of wicd was released with some bug fixes that kept arch on the systems.  Had that failed this laptop would likely have a BSD on it.  Probably OpenBSD as I haven't tested that yet.
    My current settings are configured for wicd and not causing any significant issues, other than having to reload the wireless driver when resuming from suspend.

  • Startup Disk - only Network Startup available

    Hello,
    I've got a problem with startup. I have two partitions on my internal hard drive - HFS+ for Mac OS X Leopard and NTFS for Windows XP. I wanted to check the setting of startup disk but in the Startup Disk pane in System Preferences there is nothing but Network Startup. I can boot to Mac or Windows but I always have to wait like a minute while it tryes to connect or something. Do you know how to solve this issue?
    Thanks

    fatal_ wrote:
    Hello,
    I've got a problem with startup. I have two partitions on my internal hard drive - HFS+ for Mac OS X Leopard and NTFS for Windows XP. I wanted to check the setting of startup disk but in the Startup Disk pane in System Preferences there is nothing but Network Startup. I can boot to Mac or Windows but I always have to wait like a minute while it tryes to connect or something. Do you know how to solve this issue?
    Thanks
    For starters, deselect the network boot option so it does not spend time searching.
    Holding down the Option key as noted by another poster is one way to select your OS.
    Another option is to install rEFIt, a BSD boot selector program.
    http://refit.sourceforge.net/
    I am presuming you did not use BootCamp to install your Windows program, which might account for the missing boot manager that BC provides.

  • Network startup fails every time since 6/9 update [SOLVED]

    I use the netctl method to start the network on my various machines (with static IP addresses) and since doing full system upgrades on 6/9, which included an update to systemd, the network fails to start on bootup, every time. I have to start the network manually after logging in.
    I just read a post about a similar systemd-related problem (involving a new service) from which I quote: "yet another bunch of races to accompany the ones that have pestered the arch-linux bootup since that festering pile of race-ridden cs-student pipedream called systemd has been adopted into it."
    Race conditions in network startup have been troublesome for me since systemd appeared. It's been quite some time now and the problems keep appearing. Much as I like Arch, I may have to abandon it, because this kind of basic unreliability is not acceptable.
    Last edited by donallen (2014-06-10 18:34:35)

    Well, I did some more work on this, and I have a bit of egg on my face, with an excuse. You can decide for yourself whether you think it's a good one.
    I run multiple machines that I use for different circumstances, e.g., travel. I rsync my home directory when moving from one machine to another. They are all set up identically, with Arch. To avoid confusion about which machine has the latest changes in my home directory, the scripts I use for rsync-ing and my .bash_profile send emails to my gmail address, so I have an audit trail of what I have done. In the past, I *have* experienced systemd troubles (and know that because the network didn't come up reliably and there was discussion by others on this forum of problems similar to mine, with patches for the systemd scripts) and the first symptom I saw was the inability of my .bash_profile to send my 'I just logged in on system X' email. Since the system update yesterday, I have been seeing this symptom. My mistake was assuming, instead of verifying, that the network had not come up, and just starting the network manually with netctl (there was no error message from netctl that I was starting an already-started network profile). My confusion was abetted by the fact that there was a systemd update yesterday, according to pacman. But, in fact, when I realized I was making an unwarranted assumption and actually checked, I found that the network had come up and I now believe this is not a systemd issue.
    I think the issue is with mailx (mail), which also got updated yesterday. The mail I send requires authentication by the smtp server I'm using, and my scripts provide that, using the smtp-auth-* options to mail. This worked until yesterday. Looking at the mail man page, it appears that mail configuration and these options are about to change with version 15. The current version is 14.7 and purports to support both the old and new-style configuration and options. To turn on the new style, you supposedly invoke an option, -v15-compat, which is off by default. The options I'm using are not v15 compatible, but should work, since I have not provided the option to turn on v15 support. But it appears they do not.
    I will mark this thread SOLVED, since my original diagnosis was wrong.

  • Remove the network startup

    I juz found out there is a "network startup" on my system preference/startup disk, there was only one hard drive before, and i dunno why there is one there now....how can i remove it, or why is it there?

    It's there for everyone, and is completely normal. It allows you to boot from a system on the network, rather than from the internal hard drive.

  • Airport problems on new Core 2 Duo (network attachment delays)

    I have just bought 17" 2GHz Core 2 Duo. Lovely machine, but I have some problems with internal Airport card.
    After startup it takes about 5 seconds to attach to the WiFi network I run. Subsequently, if I load iChat automatically at login, by the time Airport comes online, iChat is already displaying "Network diagnostic" dialogue. After you OK it, iChat will not try to login anymore (as opposed to temporarily losing network after successful login where it will log back in on its own.)
    Something doesn't feel right about this Airport on the iMac. After clicking Airport symbol on the top bar it takes few seconds for the menu to drop down and often accompanied with a beach ball. Ping time to a base station during these few seconds increase from 1mS to 100-200mS.
    Things I have tried:
    -Fresh reinstall of just basic OS X 10.4.7 from restore disks
    -Using two different access points (base stations) - 3Com and D-Link
    -WAP, WEP and just open network
    -limit connections to 802.11b mode only (11Mbps and lower)
    -Change WiFi channels and use interference robustness
    -Use PowerBook G4 as a base station in computer-to-computer and Internet sharing modes
    With all the above the behaviour does not change...
    I have a stock iMac model with no custom options, modifications or peripherals. Signal strength is excellent.
    My 17" PowerBook G4 in the same room boots up and wakes up into fully active Airport connection and it "just works" smoothly and transparently. So were all other WiFi connections I had here from Macs and PC over the years.
    I have been using WiFi for 4 years and have done multiple installations including industrial networks, I am also long time Mac user so I have a feeling how it should work so I know my iMac Airport just does not work right.
    I suspect it is drivers/OS issue. This is based on the fact that once established, the link works fine but as soon as OS tries to access the Airport card to reconfigure it (either at startup or prompted by the user), some hiccups and delays occur...
    I wonder if anybody can confirm this behaviour or suggest something I might try to fix this... I want iMac to use WiFi as transparently as PowerBook G4.
    Thanks for your time.
    Leo

    Thanks, smacman, the bridge solution is brilliant and would work perfectly from technical point of view, however, I am trying to showcase the "Apple experience" to some other people and at the moment I am not winning.
    I am good enough to write shell scripts or even fix low-level source code in C or ASM but I don't want to waste my time fixing it...
    I had a quick look and the problem seems to be with iMac's Airport being very slow during existing networks scan which REQUIRES dropping current connection as channels and modulation changes during the scan. I have locked my router to work in 802.11b mode only. If I could do the same with the Airport on iMac I am sure it would have helped a lot as no 11g or 11a networks were scanned and queried. Forcing it to connect to a specific network did not help. I can't find any file with low-level hardware settings for the Airport, otherwise I'd have a go at it. Maybe I should search Darwin community's help but most probably Apple only releases compiled binary for WiFi drivers with no access to source code or settings.
    One other thought - 802.11 has a different frequency spectrum certifications in different countries and in certain areas allowed frequency range is limited. Maybe, forcing locale to e.g. France (where certified channels are only 1-7) can speed up things...
    I have tried WPA2 encryption as well but I believe the problem is occurring during the network scan.

  • KDE startup delay

    Hey there,
    ever since I installed KDE (plasma) on my notebook it has been really slow to start and doesn't show a progress bar, just fades in after 30 seconds or thereabout.
    I looked at my journal and it presented this to me
    Apr 27 18:44:58 HOSTNAME kglobalaccel5[647]: Registering key "Screensaver" for "ksmserver" : "Lock Session"
    Apr 27 18:44:58 HOSTNAME kdeinit5[628]: powerdevil: ACTIVE SESSION PATH CHANGED: "/org/freedesktop/login1/session/c2"
    Apr 27 18:44:58 HOSTNAME kdeinit5[628]: powerdevil: Current session is now inactive
    Apr 27 18:44:59 HOSTNAME systemd[528]: Time has been changed
    Apr 27 18:44:59 HOSTNAME systemd[1]: Time has been changed
    Apr 27 18:45:03 HOSTNAME NetworkManager[404]: <info> (wlp3s0): Activation: Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
    Apr 27 18:45:03 HOSTNAME NetworkManager[404]: <info> (wlp3s0): Activation: Stage 4 of 5 (IPv6 Configure Timeout) started...
    Apr 27 18:45:03 HOSTNAME NetworkManager[404]: <info> (wlp3s0): Activation: Stage 4 of 5 (IPv6 Configure Timeout) complete.
    Apr 27 18:45:23 HOSTNAME kdeinit5[628]: kcm_keyboard: New device id: 8
    Apr 27 18:45:23 HOSTNAME kdeinit5[628]: kcm_keyboard: id: 2 name: Virtual core pointer used as: 0
    Apr 27 18:45:23 HOSTNAME kdeinit5[628]: kcm_keyboard: id: 3 name: Virtual core keyboard used as: 1
    Apr 27 18:45:23 HOSTNAME kdeinit5[628]: kcm_keyboard: id: 4 name: Virtual core XTEST pointer used as: 4
    Apr 27 18:45:23 HOSTNAME kdeinit5[628]: kcm_keyboard: id: 5 name: Virtual core XTEST keyboard used as: 3
    It registers and unregisters like a million keys but that 24 seconds delay seems unnecesarry. Do you guys have an idea to what could cause this?
    I attached the whole kde startup log here:
    Apr 27 18:44:39 MYHOSTNAME dbus[407]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
    Apr 27 18:44:39 MYHOSTNAME systemd[1]: Starting Network Manager Script Dispatcher Service...
    Apr 27 18:44:39 MYHOSTNAME dbus[407]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
    Apr 27 18:44:39 MYHOSTNAME systemd[1]: Started Network Manager Script Dispatcher Service.
    Apr 27 18:44:42 MYHOSTNAME login[421]: pam_unix(login:session): session opened for user MYUSERNAME by LOGIN(uid=0)
    Apr 27 18:44:42 MYHOSTNAME systemd[1]: Created slice user-1000.slice.
    Apr 27 18:44:42 MYHOSTNAME systemd[1]: Starting user-1000.slice.
    Apr 27 18:44:42 MYHOSTNAME systemd[1]: Starting User Manager for UID 1000...
    Apr 27 18:44:42 MYHOSTNAME systemd-logind[403]: New session c1 of user MYUSERNAME.
    Apr 27 18:44:42 MYHOSTNAME systemd[1]: Started Session c1 of user MYUSERNAME.
    Apr 27 18:44:42 MYHOSTNAME systemd[1]: Starting Session c1 of user MYUSERNAME.
    Apr 27 18:44:42 MYHOSTNAME systemd[528]: pam_unix(systemd-user:session): session opened for user MYUSERNAME by (uid=0)
    Apr 27 18:44:42 MYHOSTNAME systemd[528]: Unit type .busname is not supported on this system.
    Apr 27 18:44:42 MYHOSTNAME systemd[528]: Unit boot.mount is bound to inactive unit. Stopping, too.
    Apr 27 18:44:42 MYHOSTNAME systemd[528]: Unit boot-bin.mount is bound to inactive unit. Stopping, too.
    Apr 27 18:44:42 MYHOSTNAME systemd[528]: Startup finished in 10ms.
    Apr 27 18:44:42 MYHOSTNAME systemd[528]: Reached target Timers.
    Apr 27 18:44:42 MYHOSTNAME systemd[528]: Starting Timers.
    Apr 27 18:44:42 MYHOSTNAME systemd[528]: Reached target Sockets.
    Apr 27 18:44:42 MYHOSTNAME systemd[528]: Starting Sockets.
    Apr 27 18:44:42 MYHOSTNAME systemd[528]: Reached target Paths.
    Apr 27 18:44:42 MYHOSTNAME systemd[528]: Starting Paths.
    Apr 27 18:44:42 MYHOSTNAME systemd[528]: Reached target Basic System.
    Apr 27 18:44:42 MYHOSTNAME systemd[528]: Starting Basic System.
    Apr 27 18:44:42 MYHOSTNAME systemd[528]: Reached target Default.
    Apr 27 18:44:42 MYHOSTNAME systemd[528]: Starting Default.
    Apr 27 18:44:42 MYHOSTNAME login[421]: LOGIN ON tty1 BY MYUSERNAME
    Apr 27 18:44:45 MYHOSTNAME kdeinit5[621]: Qt: Session management error: networkIdsList argument is NULL
    Apr 27 18:44:45 MYHOSTNAME kdeinit5[621]: Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
    Apr 27 18:44:45 MYHOSTNAME kdeinit5[628]: Qt: Session management error: networkIdsList argument is NULL
    Apr 27 18:44:45 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: "/usr/bin/kbuildsycoca5" (pid 635) up and running.
    Apr 27 18:44:45 MYHOSTNAME kbuildsycoca5[635]: kf5.kservice.sycoca: Trying to open ksycoca from "/home/MYUSERNAME/.cache/ksycoca5"
    Apr 27 18:44:45 MYHOSTNAME kbuildsycoca5[635]: checking file timestamps
    Apr 27 18:44:45 MYHOSTNAME kdeinit5[631]: kf5.kservice.sycoca: Trying to open ksycoca from "/home/MYUSERNAME/.cache/ksycoca5"
    Apr 27 18:44:45 MYHOSTNAME kdeinit5[631]: Initializing "kcm_style" : "kcminit_style"
    Apr 27 18:44:45 MYHOSTNAME kdeinit5[631]: Initializing "kcm_bell" : "kcminit_bell"
    Apr 27 18:44:45 MYHOSTNAME kdeinit5[631]: Initializing "kcm_input" : "kcminit_mouse"
    Apr 27 18:44:45 MYHOSTNAME kdeinit5[631]: Initializing "kcm_access" : "kcminit_access"
    Apr 27 18:44:45 MYHOSTNAME kdeinit5[621]: kf5.kservice.sycoca: Trying to open ksycoca from "/home/MYUSERNAME/.cache/ksycoca5"
    Apr 27 18:44:45 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: "/usr/bin/kaccess" (pid 640) up and running.
    Apr 27 18:44:45 MYHOSTNAME kaccess[640]: QCoreApplication::arguments: Please instantiate the QApplication object first
    Apr 27 18:44:45 MYHOSTNAME kaccess[643]: QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    Apr 27 18:44:45 MYHOSTNAME kaccess[640]: QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    Apr 27 18:44:45 MYHOSTNAME kbuildsycoca5[635]: timestamps check ok
    Apr 27 18:44:45 MYHOSTNAME kbuildsycoca5[635]: Emitting notifyDatabaseChanged ()
    Apr 27 18:44:45 MYHOSTNAME kdeinit5[628]: kf5.kservice.sycoca: Trying to open ksycoca from "/home/MYUSERNAME/.cache/ksycoca5"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "networkmanagement" still uses .desktop files ("kded/networkmanagement.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "bluedevil" still uses .desktop files ("kded/bluedevil.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "obexftpdaemon" still uses .desktop files ("kded/obexftpdaemon.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "solidautoeject" still uses .desktop files ("kded/solidautoeject.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "kwrited" still uses .desktop files ("kded/kwrited.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "ksysguard" still uses .desktop files ("kded/ksysguard.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "desktopnotifier" still uses .desktop files ("kded/desktopnotifier.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "kscreen" still uses .desktop files ("kded/kscreen.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "keyboard" still uses .desktop files ("kded/keyboard.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "appmenu" still uses .desktop files ("kded/appmenu.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "platformstatus" still uses .desktop files ("kded/platformstatus.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "khotkeys" still uses .desktop files ("kded/khotkeys.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "ktouchpadenabler" still uses .desktop files ("kded/ktouchpadenabler.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "freespacenotifier" still uses .desktop files ("kded/freespacenotifier.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "ktimezoned" still uses .desktop files ("kded/ktimezoned.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "kmixd" still uses .desktop files ("kded/kmixd.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "statusnotifierwatcher" still uses .desktop files ("kded/statusnotifierwatcher.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "recentdocumentsnotifier" still uses .desktop files ("kded/recentdocumentsnotifier.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "soliduiserver" still uses .desktop files ("kded/soliduiserver.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "powerdevil" still uses .desktop files ("kded/powerdevil.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "proxyscout" has already been found using JSON metadata, please don't install the now unneeded .desktop file ("kded/proxyscout.desktop").
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "networkstatus" still uses .desktop files ("kded/networkstatus.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "remotedirnotify" still uses .desktop files ("kded/remotedirnotify.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "networkwatcher" still uses .desktop files ("kded/networkwatcher.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[642]: Qt: Session management error: networkIdsList argument is NULL
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: found kded module "networkmanagement" by prepending 'kded_' to the library path, please fix your metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: Successfully loaded module "networkmanagement"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[642]: Configuring Lock Action
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: found kded module "ksysguard" by prepending 'kded_' to the library path, please fix your metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: Successfully loaded module "ksysguard"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: found kded module "kscreen" by prepending 'kded_' to the library path, please fix your metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: Successfully loaded module "kscreen"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: found kded module "statusnotifierwatcher" by prepending 'kded_' to the library path, please fix your metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: Successfully loaded module "statusnotifierwatcher"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: found kded module "powerdevil" by prepending 'kded_' to the library path, please fix your metadata.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kf5.kded: Successfully loaded module "powerdevil"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[621]: kf5.kservice.sycoca: Trying to open ksycoca from "/home/MYUSERNAME/.cache/ksycoca5"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: "/usr/lib/kf5/kconf_update" (pid 649) up and running.
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Loading group "khotkeys"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: "{d03619b6-9b3c-48cc-9d9c-a2aadb485550}" skipping because key "" is already taken
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Loading group "krunner"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Loading group "kwin"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Loading group "kmix"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Loading group "kded5"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Loading group "plasmashell"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Loading group "KDE Keyboard Layout Switcher"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Loading group "ksmserver"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Registering key "Ctrl+Esc" for "kded5" : "Show System Activity"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Registering key "Ctrl+Alt+L" for "ksmserver" : "Lock Session"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Registering key "Screensaver" for "ksmserver" : "Lock Session"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[642]: XSync seems available and ready
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[642]: XSync Inited
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[642]: Supported, init completed
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: Loading UPower backend...
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: UPower service, org.freedesktop.UPower , is not registered on the bus. Trying to find out if it is activated.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: UPower was found, activating service...
    Apr 27 18:44:46 MYHOSTNAME dbus[407]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
    Apr 27 18:44:46 MYHOSTNAME systemd[1]: Starting Daemon for power management...
    Apr 27 18:44:46 MYHOSTNAME dbus[407]: [system] Successfully activated service 'org.freedesktop.UPower'
    Apr 27 18:44:46 MYHOSTNAME systemd[1]: Started Daemon for power management.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: Success!
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: Backend loaded, loading core
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: Core loaded, initializing backend
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: Using XRandR
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: Screen brightness value: 7
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: current screen brightness value: 7
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: Backend is ready, KDE Power Management system initialized
    Apr 27 18:44:46 MYHOSTNAME dbus[407]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
    Apr 27 18:44:46 MYHOSTNAME systemd[1]: Starting Disk Manager...
    Apr 27 18:44:46 MYHOSTNAME udisksd[665]: udisks daemon version 2.1.5 starting
    Apr 27 18:44:46 MYHOSTNAME dbus[407]: [system] Successfully activated service 'org.freedesktop.UDisks2'
    Apr 27 18:44:46 MYHOSTNAME systemd[1]: Started Disk Manager.
    Apr 27 18:44:46 MYHOSTNAME udisksd[665]: Acquired the name org.freedesktop.UDisks2 on the system message bus
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: A new battery was detected
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: XSync seems available and ready
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: XSync Inited
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: Supported, init completed
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: Session path: "/org/freedesktop/login1/session/c1"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: ACTIVE SESSION PATH: "/org/freedesktop/login1/session/c1"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: Current session is now active
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: fd passing available: true
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: systemd powersave events handling inhibited, descriptor: 18
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: systemd support initialized
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: Got a valid offer for "DPMSControl"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Registering key "Monitor Brightness Up" for "kded5" : "Increase Screen Brightness"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Registering key "Monitor Brightness Down" for "kded5" : "Decrease Screen Brightness"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Registering key "Keyboard Brightness Up" for "kded5" : "Increase Keyboard Brightness"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Registering key "Keyboard Brightness Down" for "kded5" : "Decrease Keyboard Brightness"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Registering key "Keyboard Light On/Off" for "kded5" : "Toggle Keyboard Backlight"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Registering key "Sleep" for "kded5" : "Sleep"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Registering key "Hibernate" for "kded5" : "Hibernate"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: "Hibernate" : Failed to register "Hibernate"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Registering key "Power Off" for "kded5" : "PowerOff"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: Core is ready, registering various services on the bus...
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: Can't contact ck
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: We are now into activity "default"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: () ()
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: () ()
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: Loading profile for plugged AC
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: Activity is not forcing a profile
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: Created alarm 16777217
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: Created alarm 16777222
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: Profiles: "AC" ""
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: set screen brightness percentage: 100
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: Screen brightness value max: 15
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: set screen brightness value: 15
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil:
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: Loading timeouts with 300000
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: Created alarm 16777223
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: Created alarm 16777224
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: Created alarm 16777225
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.9'
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: QDBusConnection: name 'org.freedesktop.UDisks2' had owner '' but we thought it was ':1.13'
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Unregistering key "Keyboard Brightness Up" for "kded5" : "Increase Keyboard Brightness"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Unregistering key "Keyboard Brightness Down" for "kded5" : "Decrease Keyboard Brightness"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Unregistering key "Keyboard Light On/Off" for "kded5" : "Toggle Keyboard Backlight"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: Screen brightness value: 15
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: Brightness changed!!
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: Screen brightness value max: 15
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: Screen brightness value: 15
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: Brightness changed!!
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: Screen brightness value: 15
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: powerdevil: Brightness changed!!
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: detected kglobalaccel restarting, re-registering all shortcut keys
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[642]: Created alarm 20971521
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[642]: ksmserver: "/run/user/1000/KSMserver"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[642]: ksmserver: KSMServer: SetAProc_loc: conn 0 , prot= local , file= @/tmp/.ICE-unix/642
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[642]: ksmserver: KSMServer: SetAProc_loc: conn 1 , prot= unix , file= /tmp/.ICE-unix/642
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[642]: ksmserver: KSMServer::restoreSession "saved at previous logout"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: Service: 0 "/etc/xdg/autostart/krunner.desktop"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[642]: QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.9'
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[642]: detected kglobalaccel restarting, re-registering all shortcut keys
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[642]: Session path: "/org/freedesktop/login1/session/c1"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: "/usr/bin/krunner" (pid 677) up and running.
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: Qt: Session management error: networkIdsList argument is NULL
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.backendLauncher: Requested backend: ""
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.backendLauncher: Lookup paths: ("/usr/lib/qt/plugins", "/usr/lib/kf5")
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.backendLauncher: Trying "/usr/lib/qt/plugins//kf5/kscreen/KSC_XRandR.so"
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xcb.helper: Detected XRandR 1.4
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xcb.helper: Event Base: 89
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xcb.helper: Event Error: 147
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.backendLauncher: Loading "XRandR" backend
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: appId= ":1.10" newAppId= ":1.10" pendingAppId= "org.kde.krunner"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: appId= "org.kde.KScreen.Backend.XRandR" newAppId= "org.kde.KScreen.Backend.XRandR" pendingAppId= "org.kde.krunner"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kscreen: launcherDataAvailable: "org.kde.KScreen.Backend.XRandR"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: appId= ":1.11" newAppId= ":1.11" pendingAppId= "org.kde.krunner"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: Service: 0 "/etc/xdg/autostart/plasmashell.desktop"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kscreen.kded: Config KScreen::Config(0x138e860) is ready
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Registering key "Display" for "kded5" : "display"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kscreen.kded: Applying config
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kscreen.kded: Calculating config ID for KScreen::Config(0x138e860)
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kscreen.kded: Part of the Id: "46d063b31aa4bfa4aa488b784881c4eb"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kscreen.kded: Config ID: "b42afda34ff5f252655c26442199ed66"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kscreen.kded: Calculating config ID for KScreen::Config(0x138e860)
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kscreen.kded: Part of the Id: "46d063b31aa4bfa4aa488b784881c4eb"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kscreen.kded: Config ID: "b42afda34ff5f252655c26442199ed66"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kscreen.kded: Applying known config "b42afda34ff5f252655c26442199ed66"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kscreen.kded: Finding a mode for QSize(1440, 900) @ 60.0375
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kscreen.kded: Found: "76" QSize(1440, 900) @ 60.0375
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kscreen.kded: doApplyConfig()
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: "/usr/bin/plasmashell" (pid 680) up and running.
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xrandr: XRandR::setConfig
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xrandr: Output: "LVDS1" Size: QSize(1440, 900) Pos: QPoint(0,0)
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xrandr: Disabled/Disconnected output: "DP1"
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xrandr: Disabled/Disconnected output: "DP2"
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xrandr: Disabled/Disconnected output: "DP3"
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xrandr: Disabled/Disconnected output: "HDMI1"
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xrandr: Disabled/Disconnected output: "HDMI2"
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xrandr: Disabled/Disconnected output: "HDMI3"
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xrandr: Disabled/Disconnected output: "VGA1"
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xrandr: Disabled/Disconnected output: "VIRTUAL1"
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xrandr: Requested screen size is QSize(1440, 900)
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xrandr: 1
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xrandr: Actions to perform:
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xrandr: Primary Output: 66
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xrandr: Change Screen Size: false
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xrandr: Disable outputs: false
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xrandr: Change outputs: false
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xrandr: Enable outputs: false
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xrandr: XRandR::setConfig done!
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: appId= ":1.12" newAppId= ":1.12" pendingAppId= "org.kde.plasmashell"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kscreen.kded: Config applied
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kscreen.kded: Monitor for changes: true
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: appId= "org.kde.kwin" newAppId= "org.kde.kwin" pendingAppId= "org.kde.plasmashell"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Registering key "Alt+Space" for "krunner" : "run command"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Registering key "Alt+F2" for "krunner" : "run command"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Registering key "Search" for "krunner" : "run command"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Registering key "Alt+Shift+F2" for "krunner" : "run command on clipboard contents"
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xcb.helper: OUTPUT CHANGE
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xcb.helper: Output: 66
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xcb.helper: CRTC: 63
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xcb.helper: Mode: 76
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xcb.helper: Rotation: "RR_Rotate_0"
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xcb.helper: Connection: "RR_Connected"
    Apr 27 18:44:46 MYHOSTNAME kscreen_backend_launcher[673]: kscreen.xcb.helper: Subpixel Order: 1
    Apr 27 18:44:46 MYHOSTNAME kwin_x11[676]: kwin_core: Extensions: shape: 0x "11" composite: 0x "4" render: 0x "b" fixes: 0x "50" randr: 0x "14" sync: 0x "31" damage: 0x "11"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kscreen: Requesting missing EDID for outputs (66)
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[628]: kscreen.kded: Change detected
    Apr 27 18:44:46 MYHOSTNAME krunner[677]: Calling KPluginInfo::property("X-KDE-PluginInfo-Name") is deprecated, use KPluginInfo::pluginName() in "/usr/lib/qt/plugins/plasma/packagestructure/plasma_packagestructure_share.so" instead.
    Apr 27 18:44:46 MYHOSTNAME krunner[677]: Calling KPluginInfo::property("X-KDE-PluginInfo-Name") is deprecated, use KPluginInfo::pluginName() in "/usr/lib/qt/plugins/plasma/packagestructure/plasma_packagestructure_wallpaper.so" instead.
    Apr 27 18:44:46 MYHOSTNAME krunner[677]: Calling KPluginInfo::property("X-KDE-PluginInfo-Name") is deprecated, use KPluginInfo::pluginName() in "/usr/lib/qt/plugins/plasma/packagestructure/plasma_packagestructure_layoutemplate.so" instead.
    Apr 27 18:44:46 MYHOSTNAME krunner[677]: Calling KPluginInfo::property("X-KDE-PluginInfo-Name") is deprecated, use KPluginInfo::pluginName() in "/usr/lib/qt/plugins/plasma/packagestructure/plasma_packagestructure_lookandfeel.so" instead.
    Apr 27 18:44:46 MYHOSTNAME krunner[677]: Calling KPluginInfo::property("X-KDE-PluginInfo-Name") is deprecated, use KPluginInfo::pluginName() in "/usr/lib/qt/plugins/plasma/packagestructure/plasma_packagestructure_plasmashell.so" instead.
    Apr 27 18:44:46 MYHOSTNAME krunner[677]: Calling KPluginInfo::property("X-KDE-PluginInfo-Name") is deprecated, use KPluginInfo::pluginName() in "/usr/lib/qt/plugins/plasma/packagestructure/plasma_packagestructure_wallpaperimages.so" instead.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: appId= ":1.13" newAppId= ":1.13" pendingAppId= "org.kde.plasmashell"
    Apr 27 18:44:46 MYHOSTNAME kwin_x11[676]: Constructing a KPluginInfo object from old style JSON. Please use kcoreaddons_desktop_to_json() for "/usr/lib/qt/plugins/org.kde.kdecoration2/breezedecoration.so" instead of kservice_desktop_to_json() in your CMake code.
    Apr 27 18:44:46 MYHOSTNAME kwin_x11[676]: Constructing a KPluginInfo object from old style JSON. Please use kcoreaddons_desktop_to_json() for "/usr/lib/qt/plugins/org.kde.kdecoration2/kwin5_aurorae.so" instead of kservice_desktop_to_json() in your CMake code.
    Apr 27 18:44:46 MYHOSTNAME kwin_x11[676]: kf5.kservice.sycoca: Trying to open ksycoca from "/home/MYUSERNAME/.cache/ksycoca5"
    Apr 27 18:44:46 MYHOSTNAME kwin_x11[676]: Trying to load decoration plugin: "/usr/lib/qt/plugins/org.kde.kdecoration2/breezedecoration.so"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: Service: 0 "/etc/xdg/autostart/polkit-kde-authentication-agent-1.desktop"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: "/usr/lib/polkit-kde/polkit-kde-authentication-agent-1" (pid 688) up and running.
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: appId= "org.kde.KWin" newAppId= "org.kde.KWin" pendingAppId= "*.polkit-kde-authentication-agent-1"
    Apr 27 18:44:46 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: appName= "KWin"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Registering key "Alt+F3" for "kwin" : "Window Operations Menu"
    Apr 27 18:44:46 MYHOSTNAME kglobalaccel5[647]: Registering key "Alt+F4" for "kwin" : "Window Close"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Ctrl+Alt+A" for "kwin" : "Activate Window Demanding Attention"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Ctrl+F12" for "plasmashell" : "show dashboard"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Meta+Q" for "plasmashell" : "manage activities"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Meta+Tab" for "plasmashell" : "next activity"
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: appId= ":1.14" newAppId= ":1.14" pendingAppId= "*.polkit-kde-authentication-agent-1"
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: appName= "14"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Meta+Shift+Tab" for "plasmashell" : "previous activity"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Meta+S" for "plasmashell" : "stop current activity"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Meta+Alt+Up" for "kwin" : "Switch Window Up"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Meta+Alt+Down" for "kwin" : "Switch Window Down"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Meta+Alt+Right" for "kwin" : "Switch Window Right"
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[642]: completeShutdownOrCheckpoint called
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Meta+Alt+Left" for "kwin" : "Switch Window Left"
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: appId= ":1.15" newAppId= ":1.15" pendingAppId= "*.polkit-kde-authentication-agent-1"
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: appName= "15"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Ctrl+Alt+Esc" for "kwin" : "Kill Window"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Alt+Shift+F12" for "kwin" : "Suspend Compositing"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Alt+Tab" for "kwin" : "Walk Through Windows"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Alt+Shift+Backtab" for "kwin" : "Walk Through Windows (Reverse)"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Alt+`" for "kwin" : "Walk Through Windows of Current Application"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Alt+~" for "kwin" : "Walk Through Windows of Current Application (Reverse)"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: adding shift to the grab
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Ctrl+F1" for "kwin" : "Switch to Desktop 1"
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[642]: completeShutdownOrCheckpoint called
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Ctrl+F2" for "kwin" : "Switch to Desktop 2"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Ctrl+F3" for "kwin" : "Switch to Desktop 3"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Ctrl+F4" for "kwin" : "Switch to Desktop 4"
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: appId= ":1.16" newAppId= ":1.16" pendingAppId= "*.polkit-kde-authentication-agent-1"
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: appName= "16"
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: appId= "org.kde.ActivityManager" newAppId= "org.kde.ActivityManager" pendingAppId= "*.polkit-kde-authentication-agent-1"
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: appName= "ActivityManager"
    Apr 27 18:44:47 MYHOSTNAME kactivitymanagerd[697]: org.kde.kactivities.activities: Starting the KDE Activity Manager daemon QDateTime("2015-04-27 18:44:47.205 CEST Qt::LocalTime")
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: appId= ":1.17" newAppId= ":1.17" pendingAppId= "*.polkit-kde-authentication-agent-1"
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: appName= "17"
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kscreen.kded: Saving current config to file
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kscreen.kded: Calculating config ID for KScreen::Config(0x138e860)
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kscreen.kded: Part of the Id: "46d063b31aa4bfa4aa488b784881c4eb"
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kscreen.kded: Config ID: "b42afda34ff5f252655c26442199ed66"
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kscreen.kded: Config saved on: "/home/MYUSERNAME/.local/share/kscreen/b42afda34ff5f252655c26442199ed66"
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: screens: 1 desktops: 1
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Done.
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: screens: 1 desktops: 1
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Done.
    Apr 27 18:44:47 MYHOSTNAME polkit-kde-authentication-agent-1[688]: New PolkitAgentListener 0x165b320
    Apr 27 18:44:47 MYHOSTNAME polkit-kde-authentication-agent-1[688]: Adding new listener PolkitQt1::Agent::Listener(0x167a790) for 0x165b320
    Apr 27 18:44:47 MYHOSTNAME polkit-kde-authentication-agent-1[688]: Listener online
    Apr 27 18:44:47 MYHOSTNAME polkitd[445]: Registered Authentication Agent for unix-session:c1 (system bus name :1.16 [/usr/lib/polkit-kde/polkit-kde-authentication-agent-1], object path /org/kde/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
    Apr 27 18:44:47 MYHOSTNAME polkit-kde-authentication-agent-1[688]: true
    Apr 27 18:44:47 MYHOSTNAME polkit-kde-authentication-agent-1[688]: Invalid service name "/org/kde/polkit-kde-authentication-agent-1" using: "/org/kde/polkitkdeauthenticationagent1"
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: Service: 0 ""
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[642]: ksmserver: Autostart 0 done
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[642]: kcminit not running? If we are running with mobile profile or in another platform other than X11 this is normal.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[642]: ksmserver: Kcminit phase 1 done
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: Service: 1 "/etc/xdg/autostart/restore_kmix_volumes.desktop"
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: "/usr/bin/kmixctrl" (pid 706) up and running.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: Service: 1 ""
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[642]: ksmserver: Autostart 1 done
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Ctrl+Alt+Del" for "ksmserver" : "Log Out"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Ctrl+Alt+Shift+Del" for "ksmserver" : "Log Out Without Confirmation"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Ctrl+Alt+Shift+PgDown" for "ksmserver" : "Halt Without Confirmation"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Ctrl+Alt+Shift+PgUp" for "ksmserver" : "Reboot Without Confirmation"
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[642]: completeShutdownOrCheckpoint called
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[642]: completeShutdownOrCheckpoint called
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: "/usr/bin/kactivitymanagerd" (pid 707) up and running.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[642]: completeShutdownOrCheckpoint called
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: screens: 1 desktops: 1
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Done.
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Initializing OpenGL compositing
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Choosing GLXFBConfig 0x66 X visual 0x7a depth 24 RGBA 8:8:8:8 ZS 0:0
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: Direct rendering: true
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Color correction: false
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: 0x3: 0:1(12): warning: extension `GL_AMD_vertex_shader_layer' unsupported in vertex shader
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[642]: completeShutdownOrCheckpoint called
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: OpenGL 2 compositing successfully initialized
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Vertical Refresh rate 60 Hz
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kf5.kservice.sycoca: Trying to open ksycoca from "/home/MYUSERNAME/.cache/ksycoca5"
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: Using FBConfig 0x6c for visual 0x61
    Apr 27 18:44:47 MYHOSTNAME krunner[677]: Trying to use rootObject before initialization is completed, whilst using setInitializationDelayed. Forcing completion
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Enabled by default function disables effect: "blur"
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Enabled by default function disables effect: "contrast"
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Session path: "/org/freedesktop/login1/session/c1"
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Successfully loaded built-in effect: "dashboard"
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Successfully loaded scripted effect: "kwin4_effect_maximize"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Ctrl+F8" for "kwin" : "ShowDesktopGrid"
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Successfully loaded built-in effect: "desktopgrid"
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Successfully loaded scripted effect: "kwin4_effect_login"
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Successfully loaded built-in effect: "highlightwindow"
    Apr 27 18:44:47 MYHOSTNAME kactivitymanagerd[697]: kf5.kservice.sycoca: Trying to open ksycoca from "/home/MYUSERNAME/.cache/ksycoca5"
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Successfully loaded scripted effect: "kwin4_effect_dialogparent"
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Successfully loaded built-in effect: "kscreen"
    Apr 27 18:44:47 MYHOSTNAME kactivitymanagerd[697]: Setting the name: "org.kde.ActivityManager.ActivityTemplates"
    Apr 27 18:44:47 MYHOSTNAME kactivitymanagerd[697]: org.kde.kactivities.application: [ OK ] loaded: "Activity Templates"
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Successfully loaded scripted effect: "kwin4_effect_fade"
    Apr 27 18:44:47 MYHOSTNAME kactivitymanagerd[697]: org.kde.kactivities.application: [ OK ] loaded: "Share-Like-Connect"
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Successfully loaded built-in effect: "logout"
    Apr 27 18:44:47 MYHOSTNAME kactivitymanagerd[697]: Setting the name: "org.kde.ActivityManager.Resources.Scoring"
    Apr 27 18:44:47 MYHOSTNAME kactivitymanagerd[697]: Creating directory: "/home/MYUSERNAME/.local/share/kactivitymanagerd/resources/"
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: "/usr/bin/bluedevil-monolithic" (pid 717) up and running.
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Successfully loaded scripted effect: "kwin4_effect_translucency"
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Successfully loaded built-in effect: "minimizeanimation"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Ctrl+F9" for "kwin" : "Expose"
    Apr 27 18:44:47 MYHOSTNAME kactivitymanagerd[697]: Database connection: "kactivities_db_resources_139855001909184_readwrite"
    query_only: QVariant(qlonglong, 0)
    journal_mode: QVariant(QString, "wal")
    wal_autocheckpoint: QVariant(qlonglong, 100)
    synchronous: QVariant(qlonglong, 1)
    Apr 27 18:44:47 MYHOSTNAME kactivitymanagerd[697]: org.kde.kactivities.application: [ OK ] loaded: "Sqlite Feeder"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Ctrl+F10" for "kwin" : "ExposeAll"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Launch (C)" for "kwin" : "ExposeAll"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Ctrl+F7" for "kwin" : "ExposeClass"
    Apr 27 18:44:47 MYHOSTNAME kactivitymanagerd[697]: org.kde.kactivities.application: [ OK ] loaded: "Event Spy"
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[642]: completeShutdownOrCheckpoint called
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Successfully loaded built-in effect: "presentwindows"
    Apr 27 18:44:47 MYHOSTNAME kernel: QXcbEventReader[692]: segfault at 7fb8321d8399 ip 00007fb8321d8399 sp 00007fb8250f4e20 error 14
    Apr 27 18:44:47 MYHOSTNAME kscreen_backend_launcher[711]: kscreen.backendLauncher: Requested backend: ""
    Apr 27 18:44:47 MYHOSTNAME kscreen_backend_launcher[711]: kscreen.backendLauncher: Lookup paths: ("/usr/lib/qt/plugins", "/usr/lib/kf5")
    Apr 27 18:44:47 MYHOSTNAME kscreen_backend_launcher[711]: kscreen.backendLauncher: Trying "/usr/lib/qt/plugins//kf5/kscreen/KSC_XRandR.so"
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Successfully loaded built-in effect: "screenedge"
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Successfully loaded built-in effect: "screenshot"
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Successfully loaded built-in effect: "slide"
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Successfully loaded built-in effect: "slidingpopups"
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Successfully loaded built-in effect: "startupfeedback"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Meta+=" for "kwin" : "view_zoom_in"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Meta+-" for "kwin" : "view_zoom_out"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Meta+0" for "kwin" : "view_actual_size"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Meta+Left" for "kwin" : "MoveZoomLeft"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Meta+Right" for "kwin" : "MoveZoomRight"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Meta+Up" for "kwin" : "MoveZoomUp"
    Apr 27 18:44:47 MYHOSTNAME kscreen_backend_launcher[711]: kscreen.xcb.helper: Detected XRandR 1.4
    Apr 27 18:44:47 MYHOSTNAME kscreen_backend_launcher[711]: kscreen.xcb.helper: Event Base: 89
    Apr 27 18:44:47 MYHOSTNAME kscreen_backend_launcher[711]: kscreen.xcb.helper: Event Error: 147
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Meta+Down" for "kwin" : "MoveZoomDown"
    Apr 27 18:44:47 MYHOSTNAME kscreen_backend_launcher[711]: kscreen.backendLauncher: Loading "XRandR" backend
    Apr 27 18:44:47 MYHOSTNAME kscreen_backend_launcher[711]: kscreen.backendLauncher: Failed to register as DBus service: another launcher already running?
    Apr 27 18:44:47 MYHOSTNAME kscreen_backend_launcher[711]: kscreen.backendLauncher: ""
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Meta+F5" for "kwin" : "MoveMouseToFocus"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Meta+F6" for "kwin" : "MoveMouseToCenter"
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Successfully loaded built-in effect: "zoom"
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: QXcbConnection: XCB error: 3 (BadWindow), sequence: 886, resource id: 50331653, major code: 18 (ChangeProperty), minor code: 0
    Apr 27 18:44:47 MYHOSTNAME systemd-coredump[718]: Process 691 (kactivitymanage) of user 1000 dumped core.
    Apr 27 18:44:47 MYHOSTNAME kmixctrl[706]: QString::arg: Argument missing: "hw%i" , 0
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: QXcbConnection: XCB error: 3 (BadWindow), sequence: 890, resource id: 50331654, major code: 18 (ChangeProperty), minor code: 0
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: QXcbConnection: XCB error: 3 (BadWindow), sequence: 902, resource id: 48234501, major code: 18 (ChangeProperty), minor code: 0
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[642]: completeShutdownOrCheckpoint called
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: "/usr/bin/kmix" (pid 722) up and running.
    Apr 27 18:44:47 MYHOSTNAME bluedevil-monolithic[717]: service is "org.kde.StatusNotifierItem-717-1"
    Apr 27 18:44:47 MYHOSTNAME bluedevil-monolithic[717]: Registering a client interface to the KStatusNotifierWatcher
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Alt+F1" for "plasmashell" : "activate widget 2"
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: Registering "org.kde.StatusNotifierItem-717-1/StatusNotifierItem" to system tray
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[642]: completeShutdownOrCheckpoint called
    Apr 27 18:44:47 MYHOSTNAME kmix[726]: QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    Apr 27 18:44:47 MYHOSTNAME kmix[722]: QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: "Thunar" (pid 731) up and running.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[642]: completeShutdownOrCheckpoint called
    Apr 27 18:44:47 MYHOSTNAME kmix[726]: KXMLGUI file found at deprecated location ("/usr/share/kmix/kmixui.rc") -- please use ${KXMLGUI_INSTALL_DIR} to install this file instead.
    Apr 27 18:44:47 MYHOSTNAME kmix[726]: Shortcut for action "hide_kmixwindow" "Hide Mixer Window" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
    Apr 27 18:44:47 MYHOSTNAME kmix[726]: Shortcut for action "save_1" "Save volume profile 1" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
    Apr 27 18:44:47 MYHOSTNAME kmix[726]: Shortcut for action "save_2" "Save volume profile 2" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
    Apr 27 18:44:47 MYHOSTNAME kmix[726]: Shortcut for action "save_3" "Save volume profile 3" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
    Apr 27 18:44:47 MYHOSTNAME kmix[726]: Shortcut for action "save_4" "Save volume profile 4" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
    Apr 27 18:44:47 MYHOSTNAME kmix[726]: Shortcut for action "load_1" "Load volume profile 1" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
    Apr 27 18:44:47 MYHOSTNAME kmix[726]: Shortcut for action "load_2" "Load volume profile 2" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
    Apr 27 18:44:47 MYHOSTNAME kmix[726]: Shortcut for action "load_3" "Load volume profile 3" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
    Apr 27 18:44:47 MYHOSTNAME kmix[726]: Shortcut for action "load_4" "Load volume profile 4" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Volume Up" for "kmix" : "increase_volume"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Volume Down" for "kmix" : "decrease_volume"
    Apr 27 18:44:47 MYHOSTNAME kglobalaccel5[647]: Registering key "Volume Mute" for "kmix" : "mute"
    Apr 27 18:44:47 MYHOSTNAME kmix[726]: Your code needs to be ported in KF5. See the Ki18n programmers guide.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: Loading second phase autoload
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: Service: 2 "/home/MYUSERNAME/.config/autostart/cutegram.desktop"
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "networkmanagement" still uses .desktop files ("kded/networkmanagement.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "bluedevil" still uses .desktop files ("kded/bluedevil.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "obexftpdaemon" still uses .desktop files ("kded/obexftpdaemon.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "solidautoeject" still uses .desktop files ("kded/solidautoeject.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: "/usr/bin/cutegram" failed.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "kwrited" still uses .desktop files ("kded/kwrited.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: Service: 2 "/etc/xdg/autostart/kmix_autostart.desktop"
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: "/usr/bin/kmix" (pid 739) up and running.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "ksysguard" still uses .desktop files ("kded/ksysguard.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "desktopnotifier" still uses .desktop files ("kded/desktopnotifier.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "kscreen" still uses .desktop files ("kded/kscreen.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "keyboard" still uses .desktop files ("kded/keyboard.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "appmenu" still uses .desktop files ("kded/appmenu.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "platformstatus" still uses .desktop files ("kded/platformstatus.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "khotkeys" still uses .desktop files ("kded/khotkeys.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "ktouchpadenabler" still uses .desktop files ("kded/ktouchpadenabler.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "freespacenotifier" still uses .desktop files ("kded/freespacenotifier.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "ktimezoned" still uses .desktop files ("kded/ktimezoned.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "kmixd" still uses .desktop files ("kded/kmixd.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "statusnotifierwatcher" still uses .desktop files ("kded/statusnotifierwatcher.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "recentdocumentsnotifier" still uses .desktop files ("kded/recentdocumentsnotifier.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "soliduiserver" still uses .desktop files ("kded/soliduiserver.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "powerdevil" still uses .desktop files ("kded/powerdevil.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "proxyscout" has already been found using JSON metadata, please don't install the now unneeded .desktop file ("kded/proxyscout.desktop").
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: User timestamp, ASN: 4294967295
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "networkstatus" still uses .desktop files ("kded/networkstatus.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: User timestamp, final: 'ID: 37748741 ;WMCLASS: "kmix" : "kmix" ;Caption: "kmix" ' : 37806
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "remotedirnotify" still uses .desktop files ("kded/remotedirnotify.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Activation: No client active, allowing
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: screens: 1 desktops: 1
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Done.
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: screens: 1 desktops: 1
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: kwin_core: Done.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: kded module "networkwatcher" still uses .desktop files ("kded/networkwatcher.desktop"). Please port it to JSON metadata.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: 2nd phase: loading "solidautoeject"
    Apr 27 18:44:47 MYHOSTNAME kwin_x11[676]: QXcbConnection: XCB error: 3 (BadWindow), sequence: 1137, resource id: 31457305, major code: 18 (ChangeProperty), minor code: 0
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: found kded module "solidautoeject" by prepending 'kded_' to the library path, please fix your metadata.
    Apr 27 18:44:47 MYHOSTNAME kmix[726]: QString::arg: Argument missing: "hw%i" , 0
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[621]: kf5.kinit.klauncher: Service: 2 ""
    Apr 27 18:44:47 MYHOSTNAME kmix[741]: QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    Apr 27 18:44:47 MYHOSTNAME kmix[739]: QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: Successfully loaded module "solidautoeject"
    Apr 27 18:44:47 MYHOSTNAME kdeinit5[628]: kf5.kded: 2nd phase: loading "kwrited"
    Apr 27 18:44:47 MYHOSTNAME kmix[726]: Cannot load profile "MPRIS2.Playback_Streams.1.default" . It was removed by the user, or the KMix config file is defective.
    Apr 27 18:44:48 MYHOSTNAME kmix[726]: service is "org.kde.StatusNotifierItem-726-1"
    Apr 27 18:44:48 MYHOSTNAME kmix[726]: Registering a client interface to the KStatusNotifierWatcher
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kf5.kded: found kded module "kwrited" by prepending 'kded_' to the library path, please fix your metadata.
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kf5.kded: Successfully loaded module "kwrited"
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kf5.kded: 2nd phase: loading "keyboard"
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kf5.kded: found kded module "keyboard" by prepending 'kded_' to the library path, please fix your metadata.
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kcm_keyboard: Fetched layout groups from X server: layouts: ("us") variants: ("")
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kcm_keyboard: Parsing xkb rules from "/usr/share/X11/xkb/rules/evdev.xml"
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kcm_keyboard: xkbConfigRegistry version "1.1"
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: "Trying to convert empty KLocalizedString to QString."
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: "Trying to convert empty KLocalizedString to QString."
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: "Trying to convert empty KLocalizedString to QString."
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kcm_keyboard: Parsing xkb rules from "/usr/share/X11/xkb/rules/evdev.extras.xml"
    Apr 27 18:44:48 MYHOSTNAME kwin_x11[676]: kwin_core: User timestamp, ASN: 37485
    Apr 27 18:44:48 MYHOSTNAME kwin_x11[676]: kwin_core: User timestamp, final: 'ID: 33554449 ;WMCLASS: "plasmashell" : "plasmashell" ;Caption: "Desktop — Plasma" ' : 37485
    Apr 27 18:44:48 MYHOSTNAME kwin_x11[676]: kwin_core: Activation: No client active, allowing
    Apr 27 18:44:48 MYHOSTNAME kwin_x11[676]: kwin_core: screens: 1 desktops: 1
    Apr 27 18:44:48 MYHOSTNAME kwin_x11[676]: kwin_core: Done.
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kcm_keyboard: Merged from extra rules: 37 layouts, 0 models, 0 option groups
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kcm_keyboard: Configuring keyboard
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kcm_keyboard: configuring layouts false configuring options false
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kcm_keyboard: Fetched layout groups from X server: layouts: ("us") variants: ("")
    Apr 27 18:44:48 MYHOSTNAME kglobalaccel5[647]: Registering key "Ctrl+Alt+K" for "KDE Keyboard Layout Switcher" : "Switch to Next Keyboard Layout"
    Apr 27 18:44:48 MYHOSTNAME kglobalaccel5[647]: 1
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kcm_keyboard: Cleaning component shortcuts on load false
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kcm_keyboard: Registered for new device events from XInput, class 81
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kcm_keyboard: qCoreApp QApplication(0x7fffb4e34b00)
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kcm_keyboard: loginMode: ""
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: Failed to open layout memory xml file for reading "/home/MYUSERNAME/.local/share/kded5/keyboard/session/layout_memory.xml" error: 5
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kf5.kded: Successfully loaded module "keyboard"
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kf5.kded: 2nd phase: loading "appmenu"
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kf5.kded: found kded module "appmenu" by prepending 'kded_' to the library path, please fix your metadata.
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kf5.kded: Successfully loaded module "appmenu"
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kf5.kded: 2nd phase: loading "platformstatus"
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kf5.kded: Successfully loaded module "platformstatus"
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kf5.kded: 2nd phase: loading "khotkeys"
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kf5.kded: found kded module "khotkeys" by prepending 'kded_' to the library path, please fix your metadata.
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: Installing the delayed initialization callback.
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kf5.kded: Successfully loaded module "khotkeys"
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kf5.kded: 2nd phase: loading "ktimezoned"
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kf5.kded: found kded module "ktimezoned" by prepending 'kded_' to the library path, please fix your metadata.
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kf5.kded: Successfully loaded module "ktimezoned"
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kf5.kded: 2nd phase: loading "kmixd"
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kf5.kded: found kded module "kmixd" by prepending 'kded_' to the library path, please fix your metadata.
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kmix: kmixd: Triggering delayed initialization
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kf5.kded: Successfully loaded module "kmixd"
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kf5.kded: 2nd phase: loading "networkstatus"
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kf5.kded: Successfully loaded module "networkstatus"
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kf5.kded: 2nd phase: loading "remotedirnotify"
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kf5.kded: found kded module "remotedirnotify" by prepending 'kded_' to the library path, please fix your metadata.
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: kf5.kded: Successfully loaded module "remotedirnotify"
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: Delayed initialization.
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[642]: ksmserver: Kcminit phase 2 done
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[642]: ksmserver: Autostart 2 done
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: true
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: Reloading the khotkeys configuration
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: Version 2 File!
    Apr 27 18:44:48 MYHOSTNAME kwin_x11[676]: kwin_core: User timestamp, ASN: 4294967295
    Apr 27 18:44:48 MYHOSTNAME kwin_x11[676]: kwin_core: User timestamp, final: 'ID: 44040196 ;WMCLASS: "thunar" : "thunar" ;Caption: "EtPraktikum 2 - File Manager" ' : 38057
    Apr 27 18:44:48 MYHOSTNAME kwin_x11[676]: kwin_core: Activation: No client active, allowing
    Apr 27 18:44:48 MYHOSTNAME kwin_x11[676]: kwin_core: screens: 1 desktops: 1
    Apr 27 18:44:48 MYHOSTNAME kwin_x11[676]: kwin_core: Done.
    Apr 27 18:44:48 MYHOSTNAME kglobalaccel5[647]: Registering key "Print" for "khotkeys" : "{a8b57573-0f1c-47db-9523-81e666733509}"
    Apr 27 18:44:48 MYHOSTNAME kglobalaccel5[647]: Registering key "Launch (3)" for "khotkeys" : "{a7837fe3-e8bb-4e31-8e86-6cc88eb4fa61}"
    Apr 27 18:44:48 MYHOSTNAME kglobalaccel5[647]: Unregistering key "Launch (3)" for "khotkeys" : "{a7837fe3-e8bb-4e31-8e86-6cc88eb4fa61}"
    Apr 27 18:44:48 MYHOSTNAME kglobalaccel5[647]: Registering key "Launch (3)" for "khotkeys" : "{a7837fe3-e8bb-4e31-8e86-6cc88eb4fa61}"
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: true
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: false
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: Enabled: false
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: Handler: 0
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: Exclude: 0x0 Match? false
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: false
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: Gesture ungrab
    Apr 27 18:44:48 MYHOSTNAME kglobalaccel5[647]: 3
    Apr 27 18:44:48 MYHOSTNAME kglobalaccel5[647]: 3
    Apr 27 18:44:48 MYHOSTNAME kglobalaccel5[647]: 3
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: Imported file "/usr/share/khotkeys/kde32b1.khotkeys"
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: Imported file "/usr/share/khotkeys/konqueror_gestures_kde321.khotkeys"
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: Imported file "/usr/share/khotkeys/printscreen.khotkeys"
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: Imported file "/usr/share/khotkeys/defaults.khotkeys"
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: Enabled: false
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: Handler: 0
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: Exclude: 0x0 Match? false
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: false
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: Gesture ungrab
    Apr 27 18:44:48 MYHOSTNAME kwin_x11[676]: Using FBConfig 0x67 for visual 0x7b
    Apr 27 18:44:48 MYHOSTNAME kdeinit5[628]: Registering "org.kde.StatusNotifierItem-726-1/StatusNotifierItem" to system tray
    Apr 27 18:44:49 MYHOSTNAME kwin_x11[676]: kwin_core: User timestamp, ASN: 38162
    Apr 27 18:44:49 MYHOSTNAME kwin_x11[676]: kwin_core: User timestamp, final: 'ID: 33554455 ;WMCLASS: "plasmashell" : "plasmashell" ;Caption: "Plasma" ' : 38162
    Apr 27 18:44:49 MYHOSTNAME kwin_x11[676]: kwin_core: Activation, compared: 'ID: 33554455 ;WMCLASS: "plasmashell" : "plasmashell" ;Caption: "Plasma" ' : 38162 : 38057 : true
    Apr 27 18:44:49 MYHOSTNAME kwin_x11[676]: kwin_core: screens: 1 desktops: 1
    Apr 27 18:44:49 MYHOSTNAME kwin_x11[676]: kwin_core: Done.
    Apr 27 18:44:49 MYHOSTNAME kdeinit5[628]: Registering "org.kde.StatusNotifierHost-680" as system tray
    Apr 27 18:44:49 MYHOSTNAME kmix[726]: Registering a client interface to the KStatusNotifierWatcher
    Apr 27 18:44:49 MYHOSTNAME bluedevil-monolithic[717]: Registering a client interface to the KStatusNotifierWatcher
    Apr 27 18:44:49 MYHOSTNAME kdeinit5[628]: powerdevil: Screen brightness value: 15
    Apr 27 18:44:49 MYHOSTNAME kdeinit5[628]: powerdevil: Screen brightness value max: 15
    Apr 27 18:44:49 MYHOSTNAME kdeinit5[628]: powerdevil: Screen brightness value: 15
    Apr 27 18:44:49 MYHOSTNAME

    Check the setting in the Startup Disk pane of System Preferences.
    (52278)

  • Loginwindow startup delay

    I'm wondering if anyone else is experiencing this issue...
    Is there a way to delay the login window from starting up before the network services are available? I know there is an option in /Library/Preferences/com.apple.loginwindow.plist to use a "StartupDelay" value, however this does not work for me for some reason.
    So I got to thinking that I could create a LaunchAgent that would run on startup and maybe just sleep the system for 30 seconds at the blue screen before the login window loads, but instead of sleeping it just blows right on through to the login window. The rest of my launch agent works, but I can't seem to delay the startup no matter what I try.
    Any ideas? /var/log/system.log isn't much help, shows that the launch agent is loading on startup.

    Yes that's true, but on the other side of the coin if a user is trying to login and the directory services aren't yet bound, they will get a screen shake and assume the system isn't working. I know most people with a clue could just look at the login window and realize that it isn't yet ready (I enabled the DSStatus option of the loginwindow.plist), however that isn't the case most times. If I had just an extra 30 seconds before the login window launched, I would be good.
    Strange thing is I know I had this working before using the StartupDelay -int parameter.
    Is there any reason why a launchctl couldn't execute a script with a sleep command inside? Everything else in the script runs, just not sleep.

  • [SOLVED]systemd-analyze startup delay problem

    Hello,
    i have a problem that my systemd-analyze shows me "Bootup is not yet finished. Please try again later." when im up in my fully functional desktop, because it wants to wait 1min and 30 before it finishes the "boot"
    systemd-analyze
    Startup finished in 3.482s (kernel) + 1min 30.058s (userspace) = 1min 33.541s
    the userspace always takes that amount of time. while it actually takes ~12 sec to load with all set up. working network and stuff like that.
    systemd-analyze blame
    1.426s dkms.service
    215ms ModemManager.service
    207ms NetworkManager.service
    193ms systemd-fsck@dev-disk-by\x2duuid-c9582b14\x2de7f5\x2d4496\x2dbc09\x2d7be584a182f4.s
    148ms systemd-fsck@dev-disk-by\x2duuid-37962c3c\x2dcb8c\x2d4bb4\x2da27a\x2d58e852dcb643.s
    85ms systemd-logind.service
    78ms mnt-stuff.mount
    77ms upower.service
    68ms systemd-tmpfiles-clean.service
    54ms systemd-modules-load.service
    52ms polkit.service
    52ms systemd-udev-trigger.service
    47ms systemd-binfmt.service
    47ms kmod-static-nodes.service
    44ms mnt-downloads.mount
    44ms dev-hugepages.mount
    44ms dev-mqueue.mount
    44ms systemd-vconsole-setup.service
    43ms systemd-sysctl.service
    43ms sys-kernel-debug.mount
    41ms udisks2.service
    25ms [email protected]
    24ms lm_sensors.service
    15ms cpupower.service
    14ms alsa-restore.service
    10ms systemd-journal-flush.service
    8ms systemd-remount-fs.service
    6ms systemd-user-sessions.service
    6ms systemd-tmpfiles-setup.service
    5ms systemd-tmpfiles-setup-dev.service
    5ms rtkit-daemon.service
    4ms systemd-update-utmp.service
    4ms sys-fs-fuse-connections.mount
    3ms proc-sys-fs-binfmt_misc.mount
    3ms tmp.mount
    1ms sys-kernel-config.mount
    1ms systemd-udevd.service
    1ms systemd-random-seed.service
    nothing weird here(i think)?
    systemd-analyze critical-chain
    The time after the unit is active or started is printed after the "@" character.
    The time the unit takes to start is printed after the "+" character.
    graphical.target @1min 30.058s
    └─multi-user.target @1min 30.058s
    └─dkms.service @875ms +1.426s
    └─basic.target @869ms
    └─timers.target @627ms
    └─systemd-tmpfiles-clean.timer @627ms
    └─sysinit.target @626ms
    └─sys-fs-fuse-connections.mount @8.291s +4ms
    └─systemd-modules-load.service @61ms +54ms
    └─systemd-journald.socket @58ms
    └─-.mount @57ms
    └─system.slice @101ms
    └─-.slice @101ms
    as you can see multi-user.target and graphical.target starting at 1.30 only... allthough i dont even understand why they start at that time..cause my graphical interface is long time up already as well as my user account.
    here svg of systemd-analyze plot: https://dl.dropboxusercontent.com/u/28788188/boot.svg
    if anybody has some idea what might cause this i would really appriciate the help.
    its just seems a cosmetical issue though. since my actual boot is around 13 sec from grub to fully functional desktop.
    Last edited by xpander (2013-09-27 14:45:30)

    WonderWoofy wrote:
    These kinds of delays can happen when a service is bound to a particular piece of hardware. 
    So as an example the [email protected] uses "BindsTo=sys-subsystem-net-devices-%i.device".  So when you enable [email protected], the part between the '@' and '.service' is what it will use in place of the '%i' of the BindsTo parameter. 
    This was a common problem when there was the change from the old kernel namespace used for network devices to the persistent udev naming scheme.  During installation (or any time one was in the live media), it would use dhcpcd@eth0, so it would make sense that enabling dhcpcd@eth0 would set you all up for a nice ethernet connection when you launch the system for the first time.  But then the 80-net-slot-names.rules udev file would change the interface name, making the BindsTo parameter time out after a while, since it would not be named something like enp2s0.
    See if there are any failed units in the output of systemctl.  Of course you will have to do this after systemd claims to have "finished" booting.
    thanks, will digg into that. i do have some renaming policy there.. cause i have eth0 shown in ifconfig for example
    i remember i did something about it in the past, because i never got used with the new naming scheme.
    anyway systemctl --failed
    UNIT LOAD ACTIVE SUB DESCRIPTION
    fluidsynth.service loaded failed failed FluidSynth Daemon
    LOAD = Reflects whether the unit definition was properly loaded.
    ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
    SUB = The low-level unit activation state, values depend on unit type.
    1 loaded units listed. Pass --all to see loaded but inactive units, too.
    To show all installed unit files use 'systemctl list-unit-files'.
    and that fluidsynth is no issue. cause with this installed, it still does same. i have fluidynth uninstalled because my pulseadio doesnt work when that is enabled

  • Can't start ... tried a bunch of things ... what about network startup??

    Greetings and salutations all you helpful folks,
    I am battling away trying to get my ibook G4 to start.
    I have mounted it as a terminal and it works fine as that, and I have retrieved all the data that I need from the hard drive but now I would like to fix it and use it again.
    So, I have tried running disk utility but it says that there is nothing wrong and the volume checks.
    I have tried putting G4 OSX install disk in but it won't boot from the CD with the "C" held down.
    I then have to use open firmware to eject the CD to try the next thing, whatever that might be ...
    but when the computer is in terminal mode I can get it to read the cd in the drive just fine, but when it boots on it's own it just doesn't seem to want to do it. It does spin the disk and seem to read it but then I get a message that says that I need to restart my computer and so I do and nothing better happens.
    So, on a whim I tried my G5 disks from my iSight. I don't know why, I'm just desperate. And it told me it couldn't install that software and would I like to restart from the network or the harddrive.
    and this started some questions in my head.
    This G4 is on a network with a G5. What does "network start up" mean? Can I convince this little laptop to use the G5 as it's startup disk? Would that work? Could that work?
    Next question, I seem to have to problems starting up into Open Firmware/ Is there something I can do in that mode that might check out my drive and or repair it and/or get it to boot from the CD?
    I really need this little laptop on my system. It is used by other folks for simple things like internet and mail and ordering and now that it is down they are fighting for my machine ... aargh!!
    help? any help is reallly needed now. HOw can these drives be dead or non functioning when I can read them and spin them from another computer? I feel like this is just a software problem and I should be able to get by it ... but it has me stumped. not hard considering how much of a computer non-techno geek that I am. Just a user am I. And a frustrated one at that!!
    smiles
    kt

    wait wait I made a typo
    I said it seems to have problems starting in open firmware ... but what I meant was
    I seem to have NO problems starting up in open firmware ...
    sorry
    kt

  • Network startup

    At home I have my laptop with arch linux connected to my computer downstairs and the network is configured using dhcp. When I take my laptop with me to work it is not connected however and it sits there trying to connect to a computer that isn't there because it is not hooked up to anything. After a while it decides the network is down and gives me a login prompt.
    Is there a way to reduce the time it waits before it gives me a prompt?
    I have looked in the /etc/rc.d/network script but that doesn't make a whole lot of sense to me.
    Anyone have any ideas on this? (perhaps reducing the time it waits is a bad idea...I dunno)
    Thanks!
    HC

    ... adding a "-t 12" to the ifup() /etc/rc.d/network was the first thing i changed after installing arch on my laptop and booting offline the first time waiting 1min ... it is a nice workaround (you have to use on some distros with simmilar startup-scripts) but it leads to some not nice things:
    -> if you connect again to a LAN, you have to start the network manually (# /etc/rc.d/network start)
    -> in shutdown-sequence, it will complain about network not running
    => it works, of course, but as i'm a semi-perfectionist, i was thinking about another way to solve the 1min-waiting:
    i wanted to actually background "dhcpcd" imediately after start, so that the bootprocess can go on and the "dhcpcd" waits in the background for an answer the whole 60s
    (at the UNI, we have a really slow dhcp-server, that if i had the -t to less than 28 i dont get an ip :-( but on the other side, i dont want to wait 29s to know that there is no LAN connected to my laptop)
    unfortunately the dhcpcd has no option to go to background 
    -> anybody to know how to say the dhcpcd to go to background (without rewriting the whole startup-scripts!)?
    then i got an idea about another way to handle this: what about changing the /etc/rc.multi to offer to press a key (e.g. "n" == "This Daemon? [N]o thanx!") while a daemon is starting to stop the starting of this daemon
    the advantage of a such solution: you dont need to set an timeout-value which may hinder you to connect to a LAN that responds slowly or have to wait for nothing
    :::: the problem is: i have no idea how you can do this () --- gurus, please help ... the part that has to be changed looks now like this:
    # Start daemons
    for daemon in "${DAEMONS[@]}"; do
    if [[ `echo $daemon | grep '^[^!]' | wc -l` -eq 1 ]]; then
    /etc/rc.d/$daemon start
    fi
    done
    -> shortly said: i want to be able to kill "/etc/rc.d/$daemon start" while it is running by pressing only one key on my keyboard

Maybe you are looking for

  • Why can't Adobe Reader find or search for words on a PDF document?

    I have seen where people have the same problem whoes comments where dated back in June 2011.  WHEN WILL THIS PROBLEM BE FIXED?  I am sent PDF files with multiple pages of documents that I have to go through.  I need to find documents by employee name

  • Xml file parse  event base

    hello all, i am learning xml file with sap help sample. I have a FM, that change xml-file into if_ixml_parser, but when i wrote the xml " <person status="retired">Walt Whitman</person>" and debug it. event_sub was 312, <b>event was always initial</b>

  • Error in assigning Z program in F110 transaction

    Hello everyone ,     As per the clients request I hav created a Z report for F110 transaction (FI module) which will hav the input parameters as Run Date and the Identification and this program will mail some information to the respective vedor after

  • Tax tables

    hi, sap gurus, good afternoon to all, in which table tax information is stored in r/3 can any body say. its urgent regards, balaji.t 09990019711

  • During deployment :windows installation cannot continue because a required driver could not be installed

    During a deployment from wds i get the following error with windows 8.1 "windows installation cannot continue because a required driver could not be installed". Hardware : Gigabyte GA-Q77M-D2H. I got image from installation Disc. When the error occor