Help new member getting points

I just saw this best buy rewards system after I bought a macbook air from best buy yesterday. I still have the recipt and everything if there's some way I can still get points for my purchase?
Thanks

Hello NoahKing,
Welcome to the Best Buy forum!
Have you officially enrolled in the My Best Buy™ program? If so, then I would strongly encourage you to read over the Program Terms just so you have a better understanding of how everything works. I would also be more than happy to help answer any questions you may have about the program.
As a new member, you can earn 1 point for every $1 spent on eligible Best Buy purchases; however, any purchases made before actually enrolling in the program would not be awarded points. With that being said, your MacBook Air would not be eligible for points if you did not enroll in the program before or during the purchase.
I would like to go over your new My Best Buy™ account with you to ensure it has been fully registered and to see if you perhaps have any other questions, so I will be sending you a private message. To check your private messages, you will want to login to the forum and click on the little yellow envelope at the top of the page.
I hope that you enjoy the rest of your day, and thank you for connecting with us.
Derek|Social Media Specialist | Best Buy® Corporate
Private Message

Similar Messages

Student Loan Goodwill Help (New Member)

Hello all, I am a new member on this forum. I am trying to improve my credit score. The only negative items on my reports relate to student loans. I have been reading some posts regarding goodwill and would like to give it a shot. I was thinking of retaining a firm like Lexington Law, but I feel I can do pretty much everything that they offer and save 100 dollars a month. I have two loans from AES & Nelnet. I have a couple of 120's from 2013 & 2014. My plea for goodwill will revolve around my being a direct victim of Hurricane Sandy. My house and family were affected and I faced 2 years of hardship. Now that I am back on solid footing since the end of last year, I have been paying my loans on autopay every month. Any help in terms of contacts at AES and Nelnet would be appreciated, as well as any strategies. Thanks!

I'm a little bit confused, your post starts out talking about Parent Plus loans - which are federally backed loans. These loans cannot be consolidated by the student because they cannot be in the student's name. Parent Plus loans are borrowed by the parent, and are ultimately the parent's responsibility to repay. Any type of student loan is very difficult to discharge in bankruptcy, because you have to meet a much higher standard and go through a distinct process to establish that you will never be able to repay the loan and that requiring you to repay them would constitute a serious hardship. Ultimately the problem here is not whether these Parent Plus loans were discharged in your bankruptcy (they likely weren't), it is that they are not your debt. Do you and your mother have similar names, social security numbers or birth dates? I would contact the Student Loan Ombudsman and see if they can help you get Sallie Mae to understand that these are not your loans.

General Help New Member

Previous owner Palm 700P. New owner of a previously owned BlackBerry 8830. No software or manuals came with phone. Need a good resource for this type of data. Any assistance is greatly appreciated.

Greetings, and welcome to the BlackBerry.com Support Forums.
Personally, I would recommend the FAQ site here:
http://www.blackberryfaq.com/index.php/BlackBerry_FAQ
And the manuals here: http://www.blackberryfaq.com/index.php/Where_can_I_get_my_device_user_manual%3F
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Hi, I have this green mark (with pointing arrow looks like a link) on some words show on my window screen when I open a web page, I wonder if it is a virus link or such. Need help how to get rid of it. Thanks

Hi, I have this green mark (with pointing arrow looks like a link) on some words show on my window screen when I open a web page, I wonder if it is a virus link or such. Need help how to get rid of it. Here's the example:
WING
GAMES
MAJORITY
Thanks

If the third link you posted (the link containing the word "majority") does not look like the following then you inadvertently installed adware.
That particular page should resemble the following:
The word "majority" in the third paragraph should not be a link and should not have the green icon associated with it.
To learn how this may have occurred, and how to prevent it from occurring in the future, read How to install adware
Most so-called "news" websites are nothing more than entertainment outlets that cater to prurient interests, and contain advertisements that leave the user about three clicks away from installing junk. If you decide to frequent those websites, Safari's "Reader" feature helps minimize that exposure.
Try it:

I cannot get i-tunes anymore. I tried the i-download. Still no help. I get an error message that reads The file "itunes Library itl" cannot be read because it was created by a newer version of iTunes. What can I do? tunes down load

I cannot get i-tunes. I tried the download, but no help. I get an error message The file "iTunes library itl" cannot be read because it was created by a newer version of iTunes. Any suggestions?

If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic!

Hi, please help me , i get notification about a new update for my iPad when I do the instal for the new version it is asking me for a passcode but which passcode may I have to enter? Because when I enter my gmail passcode it is call me that my pass fail

Hi, please help me , i get notification about a new update for my iPad when I do the instal for the new version it is asking me for a passcode but which passcode may I have to enter? Because when I enter my gmail passcode it is call me that my passcode is failed

The passcode you need to enter is the passcode you set on your device. It is the passcode that you enter when you turn on your iPad or awaken it from sleep after and Auto lock.
If you do not know or remember your password and did not store it somewhere then you will have to restore your device.
http://support.apple.com/kb/HT1212

Living in Dubai where many apps are blocked. How can I get around ? Tried to create a new Id but my billing address in Dubai will not match the criteria for an account in the US. Help please to get around the censorship...thnaks

Living in Dubai where many apps are blocked. How can I get around ? Tried to create a new Id but my billing address in Dubai will not match the criteria for an account in the US. Help please to get around the censorship...thanks

The censorship in regards to certain apps not being available in your country is by your country, not by Apple.
Due to various laws and licensing in each country, in order to have an iTunes store account in a particular country you must have a credit card with a billing address in that country. If this were up to Apple, there would be no such requirement and there would be only one iTunes store for the entire world, but various laws, regulations, and licensing issues in each country, this is required by Apple.

HI,I AM THE NEW MEMBER OF I PHONE 4 FAMILY.ANY ONE AN GUIDE ME , HOW TO ADD MY NOKIA PHONE BOOK CONTACTS IN I PHONE 4 . I USES NOKIA E-5 MODEL. KINDLY HELP PLEASE. THANKS AND BEST WISHES . SHRIJI MAHARAJ

HI,I AM THE NEW MEMBER OF I PHONE 4 FAMILY.ANY ONE AN GUIDE ME , HOW TO ADD MY NOKIA PHONE BOOK CONTACTS IN I PHONE 4 . I USES NOKIA E-5 MODEL. KINDLY HELP PLEASE. THANKS AND BEST WISHES . SHRIJI MAHARAJ

Hi, I see I haven't had any responses but these problems haven't been fixed.
I still haven't been able to transfer purchases from my phone to my comp so consequently have stopped purchasing on my phone.
I bought a couple of albums recently via itunes on my comp, and tried to tranfer them to my phone via a playlist, but the sync often crashes. One album transferred except for one song, and the other hasn't at all. What happens is that when I autofill from a playlist it often hangs for ages on the first song and then I have to quit the application altogether as nothing happens for ages. Basically, the whole Itunes software freezes.
After this I find it hasn't transferred any songs, but they do appear greyed out on my phone, which means it has transferred some basic data such as the titles, but not the song itself. When I try to repeat the process to complete the transfer Itunes tells me that it can't transfer because the songs are already on the phone, but they are not!! I can't click or remove on the greyed out items, so now I have a couple of almost full albums on my computer that I can't tranfer or install on my phone, and a whole bunch of greyed out songs on my phone that I can't play or remove!
The rest of the problems as above still stand. I downloaded the latest itunes OS updates but nothing's changed. I haven't done the very latest iphone update yet though because it says you need to make sure your stuff is backed up, and I don't want to lose the purchases I made on the phone that I can't transfer to my comp. I'm planning on uninstalling itunes completely and reinstalling but I have little faith that this will fix the issue.
Can someone please help at all?? I'm so sick of this!

My newer IPhone gets a weaker cell signal at the same time and place as my wife's older one. Help

My newer IPhone gets a weaker cell phone signal at the same time and place as my wife's older IPhone. Help!

What is the signal the difference?
Follow this guide and record the numbers you see...
http://lifehacker.com/5929546/see-the-actual-signal-strength-on-your-iphone-with -this-quick-tweak
If the difference is within ~10db there's not much to worry about.
Now if you see -130 and -80 that is an issue. (talk to your carrier)
But if you see -60 and -75, both phones are operating normally.
What are the iPhones in question?
Are you both on the same network? (what network(s) are you on?)
What data connection is available on each phone? (3G/4G/LTE)
Are the iOS and Carrier settings up-to-date?

How to get point for refering new members

I have refered few friends to join sdn.. but i dont know where they can mention my id so that i can get points..
Please let me know.. where they can provide id during registration.
Regards,
Sudha.

Hi SUdha,
After entering the registration details, the user will be asked for the email id of the existing user who referred them to SDN. Points will be awarded accordingly.
Regards,
Vasuki

Ann: SuperScheduler: a new member of Super 1.80

Announcement: Super 1.8 - an EJB/J2EE monitoring/admin tool with
SuperEnvironment
SuperLogging
SuperPeekPoke
SuperReport
SuperStress
has got a new member: SuperScheduler
You can anomyously down load it free from:
http://www.acelet.com.
Super is a component based administration tool for EJB/J2ee.
It provides built-in functionality as well as
extensions, as SuperComponents. Users can install
SuperComponents onto it, or uninstall them from it.
Super has the following functions:
* A J2EE/EJB monitor.
* A gateway to EJB servers from different vendors.
* A framework holding user defined SuperComponents.
* A full-featured logging/tracing tool for centralized, chronological logging.
* A PeekPoke tool to read/write attributes from EJBs.
* A Stress test tool.
* A global environment tool.
* A report tool.
* A Scheduler tool.
It is written in pure Java.
The current version support:
* Universal servers.
* Weblogic 5.1, 6.0
* Weblogic 6.1 with EJB 2.
What is new:
Version 1.80 March 2002
Enhancement:
1. Add new component: SuperScheduler
Bug fix:
1. SuperLogging: Verbose should ignore class registration.
2. SuperLogging-tracing: an exception was thrown if the java class without package
name.
Version 1.70 January 2002
Enhancement:
1. SuperLogging: Scope can dynamically change both for upgrade to downgrade (for
weblogic 6.1, need download an application).
2. Add alias names for log threshold as new Java suggests.
3. New component: SuperReport.
Change:
1. SuperLogging: Log database parameters are specified in a properties file, instead
of EJB's deployment descriptor. It is more convenient and it avoids some potential
problems. No change for development, easier for administration.
Bug fix:
1. Add Source Path Panel now accepts both directory and jar file.
2. Bug in SuperEnvironment example (for version 1.60 only).
Version 1.60 December 2001
Enhancement:
1. SuperPeekPoke and SuperStress can use user defined dynamic argument list.
2. Add timeout parameter to logging access.
3. New installation program with A). Easy install. B). Remote command line install.
4. Support EJB 2.0 for Weblogic 6.1.
5. Support SuperPeekPoke, SuperEnvironment and SuperStress for Websphere 4.0 (SuperLogging
was supported since version 1.5).
Change:
1. Poke: argument list is set at define time, not invoke time.
2. Default log database change to server mode from web server mode, booting performance
to 10-20 times.
Bug fix:
1. If the returned object is null, Peek did not handle it correctly.
2. If the value was too big, TimeSeries chart did not handle it correctly. Now
it can handle up to 1.0E300.
3. Help message was difficult to access in installation program.
4. Source code panel now both highlights and marks the line in question (before
it was only highlight using JDK 1.2, not JDK 1.3).
5. Delete an item on PeekPoke and add a new one generated an error.
Version 1.50 August, 2001
Enhancement:
1. Source code level tracing supports EJB, JSP, java helper and other
programs which are written in native languages (as long as you
write correct log messages in your application).
2. Redress supports JSP now.
3. New installation with full help document: hope it will be easier.
4. Support WebSphere 4.0
Version 1.40 June, 2001
Enhancement:
1. Add SuperEnvironment which is a Kaleidoscope with TableView, TimeSeriesView
and PieView for GlobalProperties.
GlobalProperties is an open source program from Acelet.
2. SuperPeekPoke adds Kaleidoscope with TableView, TimeSeriesView and PieView.
Changes:
1. The structure of log database changed. You need delete old installation and
install everything new.
2. The format of time stamp of SuperLogging changed. It is not locale dependent:
better for report utilities.
3. Time stamp of SuperLogging added machine name: better for clustering environment.
Bug fix:
1. Under JDK 1.3, when you close Trace Panel, the timer may not be stopped and
Style Panel may not show up.
Version 1.30 May, 2001
Enhancement:
1. Add ConnectionPlugin support.
2. Add support for Borland AppServer.
Version 1.20 April, 2001
Enhancement:
1. Redress with option to save a backup file
2. More data validation on Dump Panel.
3. Add uninstall for Super itself.
4. Add Log Database Panel for changing the log database parameters.
5. Register Class: you can type in name or browse on file system.
6. New tour with new examples.
Bug fix:
1. Redress: save file may fail.
2. Install Bean: some may fail due to missing manifest file. Now, it is treated
as foreign beans.
3. Installation: Both installServerSideLibrary and installLogDatabase can be worked
on the original file, do not need copy to a temporary directory anymore.
4. PeekPoke: if there is no stub available, JNDI list would be empty for Weblogic5-6.
Now it pick up all availble ones and give warning messages.
5. Stress: Launch>Save>Cancel generated a null pointer exception.
Changes:
1. installLogDatabase has been changed from .zip file to .jar file.
2. SuperLogging: If the log database is broken, the log methods will not try to
access the log database. It is consistent with the document now.
3. SuperLogging will not read system properties now. You can put log database
parameters in SuperLoggingEJB's deployment descriptor.
Version 1.10 Feb., 2001
Enhancement:
1. Re-written PeekPoke with Save/Restore functions.
2. New SuperComponent: SuperStress for stress test.
3. Set a mark at the highlighted line on the Source Code
Panel (as a work-a-round for JDK 1.3).
4. Add support for WebLogic 6.0
Bug fix:
1. Uninstall bean does physically delete the jar file now.
2. WebLogic51 Envoy may not always list all JNDI names. This is fixed.
Version 1.00 Oct., 2000
Enhancement:
1. Support Universal server (virtual all EJB servers).
2. Add Lost and Found for JNDI names, in case you need it.
3. JNDI ComboBox is editable now, so you can PeekPoke not listed JNDI name (mainly
for Envoys which do not support JNDI list).
Version 0.90: Sept, 2000
Enhancement:
1. PeekPoke supports arbitrary objects (except for Vector, Hashtable
and alike) as input values.
2. Reworked help documents.
Bug fix:
1. Clicking Cancel button on Pace Panel set 0 to pace. It causes
further time-out.
2. MDI related bugs under JDK 1.3.
Version 0.80: Aug, 2000
Enhancement:
1. With full-featured SuperLogging.
Version 0.72: July, 2000
Bug fix:
1. Ignore unknown objects, so Weblogic5.1 can show JNDI list.
Version 0.71: July, 2000
Enhancement:
1. Re-worked peek algorithm, doing better for concurent use.
2. Add cacellable Wait dialog, showing Super is busy.
3. Add Stop button on Peek Panel.
4. Add undeploy example button.
Bug fix:
1. Deletion on Peek Panel may cause error under JDK 1.3. Now it works for both
1.2 and 1.3
Version 0.70: July, 2000
Enhancement:
1. PeekPoke EJBs without programming.
Bug fix:
1. Did not show many windows under JDK 1.3. Now it works for both 1.2 and 1.3
Changes:
1. All changes are backward compatible, but you may need to recompile monitor
windows defined by you.
Version 0.61: June, 2000
Bug fix:
1. First time if you choose BUFFER as logging device, message will not show.
2. Fixed LoggingPanel related bugs.
Version 0.60: May, 2000
Enhancement:
1. Add DATABASE as a logging device for persistent logging message.
2. Made alertInterval configurable.
3. Made pace for tracing configurable.
Bug fix:
1. Fixed many bugs.
Version 0.51, 0.52 and 0.53: April, 2000
Enhancement:
1. Add support to Weblogic 5.1 (support for Logging/Tracing and
user defined GUI window, not support for regular monitoring).
Bug fix:
1. Context sensitive help is available for most of windows: press F1.
2. Fix installation related problems.
Version 0.50: April, 2000
Enhancement:
1. Use JavaHelp for help system.
2. Add shutdown functionality for J2EE.
3. Add support to Weblogic 4.5 (support for Logging/Tracing and
user defined GUI window, not support for regular monitoring).
Bug fix:
1. Better exception handling for null Application.
Version 0.40: March, 2000
Enhancement:
1.New installation program, solves installation related problems.
2. Installation deploys AceletSuperApp application.
3. Add deploy/undeploy facilities.
4. Add EJB and application lists.
Change:
1.SimpleMonitorInterface: now more simple.
Version 0.30: January, 2000
Enhancement:
1. Add realm support to J2EE
2. Come with installation program: you just install what you want
the first time you run Super.
Version 0.20: January, 2000
Enhancement:
Add support to J2EE Sun-RI.
Change:
1. Replace logging device "file" with "buffer" to be
compliant to EJB 1.1. Your code do not need to change.
Version 0.10: December, 1999
Enhancement:
1. provide SimpleMonitorInterface, so GUI experience is
not necessary for developing most monitoring applications.
2. Sortable table for table based windows by mouse
click (left or right).
Version 0.01 November., 1999:
1. Bug fix: An exception thrown when log file is large.
2. Enhancement: Add tour section in Help information.
Version 0.00: October, 1999
Thanks.

Not if they are being manually added, you could look at automating the process usIng the outlineload utility or ODI if they are classic applications.
Cheers
John
http://john-goodwin.blogspot.com/

Ann: SuperReport - a new member from Super 1.7

Announcement: Super 1.7 - an EJB/J2EE monitoring tool with
SuperEnvironment
SuperLogging
SuperPeekPoke
SuperStress
has got a new member: SuperReport
You can anomyously down load it free from:
http://www.acelet.com.
Super is a component based administration tool for EJB/J2ee.
It provides built-in functionality as well as
extensions, as SuperComponents. Users can install
SuperComponents onto it, or uninstall them from it.
Super has the following functions:
* A J2EE/EJB monitor.
* A gateway to EJB servers from different vendors.
* A framework holding user defined SuperComponents.
* A PeekPoke tool to read/write attributes from EJBs.
* A full-featured logging/tracing tool for centralized, chronological logging.
* A Stress test tool.
* A global environment tool.
* A report tool.
It is written in pure Java.
The current version support:
* Universal servers.
* Weblogic 5.1, 6.0
* Weblogic 6.1 with EJB 2.
What is new:
Version 1.70 January 2002
Enhancement:
1. SuperLogging: Scope can dynamically change both for upgrade to downgrade (for
weblogic 6.1, need download an application).
2. Add alias names for log threshold as new Java suggests.
3. New component: SuperReport.
Change:
1. SuperLogging: Log database parameters are specified in a properties file, instead
of EJB's deployment descriptor. It is more convenient and it avoids some potential
problems. No change for development, easier for administration.
Bug fix:
1. Add Source Path Panel now accepts both directory and jar file.
2. Bug in SuperEnvironment example (for version 1.60 only).
Version 1.60 December 2001
Enhancement:
1. SuperPeekPoke and SuperStress can use user defined dynamic argument list.
2. Add timeout parameter to logging access.
3. New installation program with A). Easy install. B). Remote command line install.
4. Support EJB 2.0 for Weblogic 6.1.
5. Support SuperPeekPoke, SuperEnvironment and SuperStress for Websphere 4.0 (SuperLogging
was supported since version 1.5).
Change:
1. Poke: argument list is set at define time, not invoke time.
2. Default log database change to server mode from web server mode, booting performance
to 10-20 times.
Bug fix:
1. If the returned object is null, Peek did not handle it correctly.
2. If the value was too big, TimeSeries chart did not handle it correctly. Now
it can handle up to 1.0E300.
3. Help message was difficult to access in installation program.
4. Source code panel now both highlights and marks the line in question (before
it was only highlight using JDK 1.2, not JDK 1.3).
5. Delete an item on PeekPoke and add a new one generated an error.
Version 1.50 August, 2001
Enhancement:
1. Source code level tracing supports EJB, JSP, java helper and other
programs which are written in native languages (as long as you
write correct log messages in your application).
2. Redress supports JSP now.
3. New installation with full help document: hope it will be easier.
4. Support WebSphere 4.0
Version 1.40 June, 2001
Enhancement:
1. Add SuperEnvironment which is a Kaleidoscope with TableView, TimeSeriesView
and PieView for GlobalProperties.
GlobalProperties is an open source program from Acelet.
2. SuperPeekPoke adds Kaleidoscope with TableView, TimeSeriesView and PieView.
Changes:
1. The structure of log database changed. You need delete old installation and
install everything new.
2. The format of time stamp of SuperLogging changed. It is not locale dependent:
better for report utilities.
3. Time stamp of SuperLogging added machine name: better for clustering environment.
Bug fix:
1. Under JDK 1.3, when you close Trace Panel, the timer may not be stopped and
Style Panel may not show up.
Version 1.30 May, 2001
Enhancement:
1. Add ConnectionPlugin support.
2. Add support for Borland AppServer.
Version 1.20 April, 2001
Enhancement:
1. Redress with option to save a backup file
2. More data validation on Dump Panel.
3. Add uninstall for Super itself.
4. Add Log Database Panel for changing the log database parameters.
5. Register Class: you can type in name or browse on file system.
6. New tour with new examples.
Bug fix:
1. Redress: save file may fail.
2. Install Bean: some may fail due to missing manifest file. Now, it is treated
as foreign beans.
3. Installation: Both installServerSideLibrary and installLogDatabase can be worked
on the original file, do not need copy to a temporary directory anymore.
4. PeekPoke: if there is no stub available, JNDI list would be empty for Weblogic5-6.
Now it pick up all availble ones and give warning messages.
5. Stress: Launch>Save>Cancel generated a null pointer exception.
Changes:
1. installLogDatabase has been changed from .zip file to .jar file.
2. SuperLogging: If the log database is broken, the log methods will not try to
access the log database. It is consistent with the document now.
3. SuperLogging will not read system properties now. You can put log database
parameters in SuperLoggingEJB's deployment descriptor.
Version 1.10 Feb., 2001
Enhancement:
1. Re-written PeekPoke with Save/Restore functions.
2. New SuperComponent: SuperStress for stress test.
3. Set a mark at the highlighted line on the Source Code
Panel (as a work-a-round for JDK 1.3).
4. Add support for WebLogic 6.0
Bug fix:
1. Uninstall bean does physically delete the jar file now.
2. WebLogic51 Envoy may not always list all JNDI names. This is fixed.
Version 1.00 Oct., 2000
Enhancement:
1. Support Universal server (virtual all EJB servers).
2. Add Lost and Found for JNDI names, in case you need it.
3. JNDI ComboBox is editable now, so you can PeekPoke not listed JNDI name (mainly
for Envoys which do not support JNDI list).
Version 0.90: Sept, 2000
Enhancement:
1. PeekPoke supports arbitrary objects (except for Vector, Hashtable
and alike) as input values.
2. Reworked help documents.
Bug fix:
1. Clicking Cancel button on Pace Panel set 0 to pace. It causes
further time-out.
2. MDI related bugs under JDK 1.3.
Version 0.80: Aug, 2000
Enhancement:
1. With full-featured SuperLogging.
Version 0.72: July, 2000
Bug fix:
1. Ignore unknown objects, so Weblogic5.1 can show JNDI list.
Version 0.71: July, 2000
Enhancement:
1. Re-worked peek algorithm, doing better for concurent use.
2. Add cacellable Wait dialog, showing Super is busy.
3. Add Stop button on Peek Panel.
4. Add undeploy example button.
Bug fix:
1. Deletion on Peek Panel may cause error under JDK 1.3. Now it works for both
1.2 and 1.3
Version 0.70: July, 2000
Enhancement:
1. PeekPoke EJBs without programming.
Bug fix:
1. Did not show many windows under JDK 1.3. Now it works for both 1.2 and 1.3
Changes:
1. All changes are backward compatible, but you may need to recompile monitor
windows defined by you.
Version 0.61: June, 2000
Bug fix:
1. First time if you choose BUFFER as logging device, message will not show.
2. Fixed LoggingPanel related bugs.
Version 0.60: May, 2000
Enhancement:
1. Add DATABASE as a logging device for persistent logging message.
2. Made alertInterval configurable.
3. Made pace for tracing configurable.
Bug fix:
1. Fixed many bugs.
Version 0.51, 0.52 and 0.53: April, 2000
Enhancement:
1. Add support to Weblogic 5.1 (support for Logging/Tracing and
user defined GUI window, not support for regular monitoring).
Bug fix:
1. Context sensitive help is available for most of windows: press F1.
2. Fix installation related problems.
Version 0.50: April, 2000
Enhancement:
1. Use JavaHelp for help system.
2. Add shutdown functionality for J2EE.
3. Add support to Weblogic 4.5 (support for Logging/Tracing and
user defined GUI window, not support for regular monitoring).
Bug fix:
1. Better exception handling for null Application.
Version 0.40: March, 2000
Enhancement:
1.New installation program, solves installation related problems.
2. Installation deploys AceletSuperApp application.
3. Add deploy/undeploy facilities.
4. Add EJB and application lists.
Change:
1.SimpleMonitorInterface: now more simple.
Version 0.30: January, 2000
Enhancement:
1. Add realm support to J2EE
2. Come with installation program: you just install what you want
the first time you run Super.
Version 0.20: January, 2000
Enhancement:
Add support to J2EE Sun-RI.
Change:
1. Replace logging device "file" with "buffer" to be
compliant to EJB 1.1. Your code do not need to change.
Version 0.10: December, 1999
Enhancement:
1. provide SimpleMonitorInterface, so GUI experience is
not necessary for developing most monitoring applications.
2. Sortable table for table based windows by mouse
click (left or right).
Version 0.01 November., 1999:
1. Bug fix: An exception thrown when log file is large.
2. Enhancement: Add tour section in Help information.
Version 0.00: October, 1999
Thanks.

Announcement: Super 1.7 - an EJB/J2EE monitoring tool with
SuperEnvironment
SuperLogging
SuperPeekPoke
SuperStress
has got a new member: SuperReport
You can anomyously down load it free from:
http://www.acelet.com.
Super is a component based administration tool for EJB/J2ee.
It provides built-in functionality as well as
extensions, as SuperComponents. Users can install
SuperComponents onto it, or uninstall them from it.
Super has the following functions:
* A J2EE/EJB monitor.
* A gateway to EJB servers from different vendors.
* A framework holding user defined SuperComponents.
* A PeekPoke tool to read/write attributes from EJBs.
* A full-featured logging/tracing tool for centralized, chronological logging.
* A Stress test tool.
* A global environment tool.
* A report tool.
It is written in pure Java.
The current version support:
* Universal servers.
* Weblogic 5.1, 6.0
* Weblogic 6.1 with EJB 2.
What is new:
Version 1.70 January 2002
Enhancement:
1. SuperLogging: Scope can dynamically change both for upgrade to downgrade (for
weblogic 6.1, need download an application).
2. Add alias names for log threshold as new Java suggests.
3. New component: SuperReport.
Change:
1. SuperLogging: Log database parameters are specified in a properties file, instead
of EJB's deployment descriptor. It is more convenient and it avoids some potential
problems. No change for development, easier for administration.
Bug fix:
1. Add Source Path Panel now accepts both directory and jar file.
2. Bug in SuperEnvironment example (for version 1.60 only).
Version 1.60 December 2001
Enhancement:
1. SuperPeekPoke and SuperStress can use user defined dynamic argument list.
2. Add timeout parameter to logging access.
3. New installation program with A). Easy install. B). Remote command line install.
4. Support EJB 2.0 for Weblogic 6.1.
5. Support SuperPeekPoke, SuperEnvironment and SuperStress for Websphere 4.0 (SuperLogging
was supported since version 1.5).
Change:
1. Poke: argument list is set at define time, not invoke time.
2. Default log database change to server mode from web server mode, booting performance
to 10-20 times.
Bug fix:
1. If the returned object is null, Peek did not handle it correctly.
2. If the value was too big, TimeSeries chart did not handle it correctly. Now
it can handle up to 1.0E300.
3. Help message was difficult to access in installation program.
4. Source code panel now both highlights and marks the line in question (before
it was only highlight using JDK 1.2, not JDK 1.3).
5. Delete an item on PeekPoke and add a new one generated an error.
Version 1.50 August, 2001
Enhancement:
1. Source code level tracing supports EJB, JSP, java helper and other
programs which are written in native languages (as long as you
write correct log messages in your application).
2. Redress supports JSP now.
3. New installation with full help document: hope it will be easier.
4. Support WebSphere 4.0
Version 1.40 June, 2001
Enhancement:
1. Add SuperEnvironment which is a Kaleidoscope with TableView, TimeSeriesView
and PieView for GlobalProperties.
GlobalProperties is an open source program from Acelet.
2. SuperPeekPoke adds Kaleidoscope with TableView, TimeSeriesView and PieView.
Changes:
1. The structure of log database changed. You need delete old installation and
install everything new.
2. The format of time stamp of SuperLogging changed. It is not locale dependent:
better for report utilities.
3. Time stamp of SuperLogging added machine name: better for clustering environment.
Bug fix:
1. Under JDK 1.3, when you close Trace Panel, the timer may not be stopped and
Style Panel may not show up.
Version 1.30 May, 2001
Enhancement:
1. Add ConnectionPlugin support.
2. Add support for Borland AppServer.
Version 1.20 April, 2001
Enhancement:
1. Redress with option to save a backup file
2. More data validation on Dump Panel.
3. Add uninstall for Super itself.
4. Add Log Database Panel for changing the log database parameters.
5. Register Class: you can type in name or browse on file system.
6. New tour with new examples.
Bug fix:
1. Redress: save file may fail.
2. Install Bean: some may fail due to missing manifest file. Now, it is treated
as foreign beans.
3. Installation: Both installServerSideLibrary and installLogDatabase can be worked
on the original file, do not need copy to a temporary directory anymore.
4. PeekPoke: if there is no stub available, JNDI list would be empty for Weblogic5-6.
Now it pick up all availble ones and give warning messages.
5. Stress: Launch>Save>Cancel generated a null pointer exception.
Changes:
1. installLogDatabase has been changed from .zip file to .jar file.
2. SuperLogging: If the log database is broken, the log methods will not try to
access the log database. It is consistent with the document now.
3. SuperLogging will not read system properties now. You can put log database
parameters in SuperLoggingEJB's deployment descriptor.
Version 1.10 Feb., 2001
Enhancement:
1. Re-written PeekPoke with Save/Restore functions.
2. New SuperComponent: SuperStress for stress test.
3. Set a mark at the highlighted line on the Source Code
Panel (as a work-a-round for JDK 1.3).
4. Add support for WebLogic 6.0
Bug fix:
1. Uninstall bean does physically delete the jar file now.
2. WebLogic51 Envoy may not always list all JNDI names. This is fixed.
Version 1.00 Oct., 2000
Enhancement:
1. Support Universal server (virtual all EJB servers).
2. Add Lost and Found for JNDI names, in case you need it.
3. JNDI ComboBox is editable now, so you can PeekPoke not listed JNDI name (mainly
for Envoys which do not support JNDI list).
Version 0.90: Sept, 2000
Enhancement:
1. PeekPoke supports arbitrary objects (except for Vector, Hashtable
and alike) as input values.
2. Reworked help documents.
Bug fix:
1. Clicking Cancel button on Pace Panel set 0 to pace. It causes
further time-out.
2. MDI related bugs under JDK 1.3.
Version 0.80: Aug, 2000
Enhancement:
1. With full-featured SuperLogging.
Version 0.72: July, 2000
Bug fix:
1. Ignore unknown objects, so Weblogic5.1 can show JNDI list.
Version 0.71: July, 2000
Enhancement:
1. Re-worked peek algorithm, doing better for concurent use.
2. Add cacellable Wait dialog, showing Super is busy.
3. Add Stop button on Peek Panel.
4. Add undeploy example button.
Bug fix:
1. Deletion on Peek Panel may cause error under JDK 1.3. Now it works for both
1.2 and 1.3
Version 0.70: July, 2000
Enhancement:
1. PeekPoke EJBs without programming.
Bug fix:
1. Did not show many windows under JDK 1.3. Now it works for both 1.2 and 1.3
Changes:
1. All changes are backward compatible, but you may need to recompile monitor
windows defined by you.
Version 0.61: June, 2000
Bug fix:
1. First time if you choose BUFFER as logging device, message will not show.
2. Fixed LoggingPanel related bugs.
Version 0.60: May, 2000
Enhancement:
1. Add DATABASE as a logging device for persistent logging message.
2. Made alertInterval configurable.
3. Made pace for tracing configurable.
Bug fix:
1. Fixed many bugs.
Version 0.51, 0.52 and 0.53: April, 2000
Enhancement:
1. Add support to Weblogic 5.1 (support for Logging/Tracing and
user defined GUI window, not support for regular monitoring).
Bug fix:
1. Context sensitive help is available for most of windows: press F1.
2. Fix installation related problems.
Version 0.50: April, 2000
Enhancement:
1. Use JavaHelp for help system.
2. Add shutdown functionality for J2EE.
3. Add support to Weblogic 4.5 (support for Logging/Tracing and
user defined GUI window, not support for regular monitoring).
Bug fix:
1. Better exception handling for null Application.
Version 0.40: March, 2000
Enhancement:
1.New installation program, solves installation related problems.
2. Installation deploys AceletSuperApp application.
3. Add deploy/undeploy facilities.
4. Add EJB and application lists.
Change:
1.SimpleMonitorInterface: now more simple.
Version 0.30: January, 2000
Enhancement:
1. Add realm support to J2EE
2. Come with installation program: you just install what you want
the first time you run Super.
Version 0.20: January, 2000
Enhancement:
Add support to J2EE Sun-RI.
Change:
1. Replace logging device "file" with "buffer" to be
compliant to EJB 1.1. Your code do not need to change.
Version 0.10: December, 1999
Enhancement:
1. provide SimpleMonitorInterface, so GUI experience is
not necessary for developing most monitoring applications.
2. Sortable table for table based windows by mouse
click (left or right).
Version 0.01 November., 1999:
1. Bug fix: An exception thrown when log file is large.
2. Enhancement: Add tour section in Help information.
Version 0.00: October, 1999
Thanks.

Problem with add new Member in Account Dimension

Hi Expert
I want to add new member in account dimension but occured some Error about a member count of a circular reference. Please help me for solve this error. Thank you so much
Best regards,
Bank

Hi,
This kind of error indicates faulty dimension formulas. There must be at least 2 formulas referencing each other. For example:
1. A=B+C
2. C=A*D
The above 2 formulas are dependent on each other. On one hand, you need C to calculate A. On the other hand, you need A to calculate C. So, causing a cross reference. Try to remove all the dimension formulas in your account dimension and process it. See, if its successful or not. If yes, then the formula was the definite reason. Now, try to add the formula one by one, till you get the error.
Hope this helps.

Referring a New Member

Hi ALL,
How to refer new member? and how to get points regarding this?
Regards,
P.Manivannan.

Hi,
Thanks Craig Cmehil
Regards,
P.Manivannan

Move Exchange 2010 Server from AD Server to a new Member Server

Hi All,
I would like to get some suggestion on a particular task which i have presently , In my organisation i have a Exchange Server 2010 installed on Win2008 R2 DC (FSMO role Holder), also i got a ADC on Win2003 R2 Server for the same Domain , My
task is to move Exchange 2010 from DC to a new Member server without loosing mail boxes and present configuration ,Kindly guide me with the steps to achieve this task easly
Thanks & Regards
Sameer

Hi Sameer and thanks for posting. Its good that you are moving exchange server from DC, because installing exchange server on DC its not recommended. To get the job done: 1.Install exchange server on the new Member server. (You can spread the roles on
the different servers if you are in the enterprise level organization.) 2.Create MailBox Databases according to your management style. 3.Move the mailboxes from DC server to the new Exchange server. 4.Move System Mailboxes to New server. 5.I would move FSMOs
to the ADC and shut down the old exchange for a week. 6.If everything was alright uninstall old exchange and move FSMOs back. I hope this helps. Farhad

Help new member getting points

Similar Messages

Maybe you are looking for