Help! New TV@nywhere MS-8876 card not working

I seem to have the misfortune of buying this card of EBAY. The Vendor has been very supportive, and has helped me through much of the start up of this card. I have located, downloaded and cracked the MSIPVS from MSI website. Patched it, got it running and attached my antenna to it.
Fired it up, and got nothing. Absolutely nothing. Black screen, no raster, no sound.
PVS runs, searches for channels, but still nothing.
Can anyone help me with this? The vendor insists that the card is functional and will accept a return if I can prove that it is faulty.
I am running WIN98SE fully updated on MSI 745U motherboard, and MSI AGP video card.
Please help...

the serial number is the same one printed on every single CD shipped with MSI TV hardware. i really don't know why they bothered.
https://forum-en.msi.com/index.php?topic=73940.msg520672#msg520672
read this sticky i wrote ages ago - of course, substitute "TV@nywhere Master" for "TV@nyhwere", and ignore references to BETA drivers.
if you are using Win98, make sure you have at least DirectX 8.1 installed. you can download the latest version from microsoft here: http://www.microsoft.com/windows/directx/default.aspx

Similar Messages

HELP !!! 2nd VGA card not working

I have the following board: MSI 865GM2-LS (MS-6743G) Ver0B
I have just put into the PCI slot an S3 Virge/DX 375 VGA card and it gives me a yellow exclimation in device manager ( Win XP)
Under "General" is the following message:
This device cannot start (Code 20)
Under "Resources" I get the following:
This device isn't using any resources because it has a problem (Well No )
I am using the standard on-board Intel VGA card.
Could you please help me it get this working as i want to run 2 screens.
Thanks

Windows XP does support DUAL displays, but only with video cards with TWO outputs.
It's never been done before, as it's impossible. Unless you have a radeon 9xxx card and a ATI 9100 IGP chipset, which you don't have.
Sorry for the bad news

HELP! - Lumia 800 memory card not working :/

My phone decided to go into the notorious restart loop - So following everyones advice on teh internet I performed a hard reset.
It loads the orange sign - then the Nokia sign - then the windows mobile sign as if the phone is about to start with the noises etc... then it decides to goto a screen says
"MEMORY CARD NOT WORKING
Your memory card has changed, is damaged or is non-compatible.
To fix this, turn your phone off and either remove the memory card or replace it with a new compatible card. Then reset your phone to the original factory settings.
To learn how to reset your phone, refer to the owner's manual"
I also get the option to make an "emergency" call or "turn off" the phone. the volume buttons also work the volume fine aswell as the option to change the phones mode from silent to vibrate or vibrate and ring.
Tried hard reset numerous times, tried charing the phone for hours on end and trying it, tried soft resets. Basically the only options i've found.
Just to add.... Why would a phone with no memory card slot even have a message stating that the memory card is faulty and that i could even remove or replace it???
I hope someone manages to help me without having to cough up £50 excess to my insurance.
Anyone come across this before?

Sorry, it's my standard response, but your phone doesn't work. Take it back to whoever sold it to you. It's a consumer good, consumer protection rules apply.
Your problem certainly has novelty value but if you've done the hard reset and it didn't work you're at the end of the fix it yourself stage.

I can buy my needs from the game says I tell customers to help please help me Visa card not working in any Itemes games

I can buy my needs from the game says I tell customers to help please help me Visa card not working in any Itemes
games

If you mean that you have been instructed to contact iTunes support, then will need to do what it says, contact iTunes Support. These are user-to-user support forums, if you thought you were contacting Apple by posting here. Go here:
http://www.apple.com/emea/support/itunes/contact.html
to contact the iTunes Store.
If that does not answer your question, try posting in your native language, or find a friend with a better command of English to help you ask your question here.
Regards.

'Get All New Data Request by Request' option not working Between DSO n Cube

Hi BI's..
Could anyone please tell me why the option ' Get one Request only' and 'Get All New Data Request by Request' is not working in DTP between Standard DSO and InfoCube.
Scenario:
I have done the data load by Yearwise say FY 2000 to FY 2009 in Infopackage and load it to Write-optimised DSO (10 requests) and again load Request by request to Standard DSO and activate each request. I have selected the option in DTP's to 'Get All New Data Request by Request' and its working fine between WDSO and SDSO. But not working between Cube and SDSO. While Execute DTP its taking as a single request from SDSO to Cube.( 10 request to single request).
Regards,
Sari.

Hi,
How does your DTP setting looks like from below options ? It should be change log, assuming you are not deleting change log data.
Delta Init. Extraction from...
- Active Table (with archive)
- Active Table (without archive)
- Archive ( full extraction only)
- Change Log
Also if you want to enable deltas, please do not delete change log. That could create issue while further update from DSO.
Hope that helps.
Regards
Mr Kapadia
*Assigning points is the way to say thanks*

Runtime error R6025 message after log on to Vista - Flash Card not working

Hi
I'm a newbie & would appreciate any advice.
I am getting a runtime error message R6025 when I log on to Windows Vista.
When I click out of the box I then get a message saying Toshiba Flash Card not working.
I cancel that and my laptop is ok except I don't know if the flashcard is working or not because I don't know what it does.
Sorry if I sound thick
Thanks
Neelie

Hi
I found this MS knowledge base article:
+Description of the R6025 run-time error in Visual C++\+
http://support.microsoft.com/kb/125749
But I doubt this description would be useful for you or anyone here. It describes this error in Visual C++ and this is programming language.
However, I think you should simply reinstall the Value Added Package which you could download firstly from the Toshiba European page.
At first you have to remove the old Value Added Package from the system, then reboot the notebook and follow with new VAP installation.
Bye

Problem with new version 4.3.2 apps not working " after update to the new version "

Problem with new version 4.3.2 apps not working " after update to the new version "
i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

Hi There
Had the same problem as you. App would terminate when launched.
Solution to working You Tube app:
-Go to playstore
- Uninstall app (it doesn't remove the app, only removes the update)
- "Et Voila", working again.
This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
Hope it helped.
Best Regards

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

I am trying to log on to iwork but it keeps saying that my password is incorrect. I have already reset it and entered my new password and it still is not working. what should i do?

I am trying to log on to iwork but it keeps saying that my password is incorrect. I have already reset it and entered my new password and it still is not working. what should i do?

I really can't comprehend the logic that leads to believe that password for old apple id will come to e-mail for new id. Buy may be I just misunderstood something. Contact Apple for assist with password retrieval. If you can verify yourself as account owner they may be able to help you.

SB04100 Sound Blaster Card not working after computer rebuild

=SB0400 Sound Blaster Card not working after computer rebuildZ I did a full disk format and reinstall for a friend on a Dimension 3000, running XP SP3. There is no sound at all. Speakers are good, tested on another system. Model number on the back of the sound card is SB0400, so I assume this is an older 24 bit PCI SoundBlaster card. Although I reinstalled all drivers from Dell, I found no drivers for this. The Creative site has no listing for this model.
Computer does not seem to recognize the card. Have not opened the box yet but I assume if I were to remove and then reinstall the card it would be recognized (?) I then have to find an SB0400 driver.
Does anyone know where I can find an SB0400 driver ? Does the strategy of pulling and reinstalling the card make sense ? (I have really avoided tampering with any of the hardware on this box -- since it is not mine.)

Re: SB0400 Sound Blaster Card not working after computer rebuild? Thanks much for your response. Problem solved for now. I removed the board and then reinserted it, after which I was able to download the drivers directly. Some of my difficulty with this whole process has been ) I didn't know there was no working speaker in the computer and 2) I apparently misunderstood the BIOS settings for this. I re-set it up as an add-on board during the troubleshooting process. After loading the driver, I went back to the original setting (don't recall what it was but it was for integrated sound). The setting for integrated sound works fine, with external speakers and the new 24 bit driver. Still some noise (popping and static) but this board shares the bus with 2 other cards one of which is a wireless network card. May be a PCI latency issue but I'm reluctant to change that because the network card is a bit shaky anyway.
Everything works for now -- I'll be glad to get this particular computer out of my house !

HT4972 I am using iphone 3g and it is having currently IOS 4.1 version,till what IOS version can i upgrade ? please help me many of my apps are not working esp whatsapp.

am using iphone 3g and it is having currently IOS 4.1 version,till what IOS version can i upgrade ? please help me many of my apps are not working esp whatsapp.

iOS 4.2.1 is the latest version of iOS for the 3G.
Facebook and Whatsapp both require 4.3 or higher.
If you want to use those apps, either use the old version that should be in your iTunes library or upgrade the hardware to a 3GS or newer device.

TS2662 my new magic mouse scrolling & swiping will not work

my new magic mouse scrolling & swiping will not work. Help??

I had this happen to me as well. just last week (july 28, 2014) I brought my magic mouse from home to work since my work mouse was going south. paired it with bluetooth, it moved and clicked but no scroll or gestures. searched till I nearly ready to give up. then I installed USB overdrive. many forum posts said too remove that. I didn't have it, so I installed it. and then un-installed it. everything works great now.
hope this helps someone.

The new version of Adobe Flash Player not working.

The new version of Adobe Flash Player not working.
She plants the clock to all videos , advertisements and links. I tried to uninstall and reinstall everything but the result remains unchanged. I am using Windows 8.1 and Mozilla Firefox. I need your help please .
I'm sorry if i did errors of spelling because I used google translation. I 'm french .

I finally figured it out. Flash Player had not installed. I had to de-activate Active-X thru the safety tab on the menu bar and then download the Adobe Flash Player and now it's working. I re-activated Active X after I finished installing Flash,. Hope fully everything will keep working fine!

The head phone jack on my brand new iPod touch 5th generation is not working properly

The head phone jack on my brand new iPod touch 5th generation is not working properly. It has sound without the headphones in but when I plug them in it has no sound, it's low, or poppy. I had only used my apple supplied headphones once before and it worked fine. I know it's not the headphones because I tried them on my girlfriends phone and they worked fine.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear and the setup menu says there is an error. Any idea of what is happening?

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear from the menu and the setup menu says there is an error. I tried using the wireless connection, and also the cable, but none worked. Any idea of what could be happening?

What are you setting it up as.. join wireless network .. the very worst setup, it will disappear.. reboot the whole network in order modem. router TC.. clients and it will likely reappear.
Tell us what network setup you are using..
If you setup with cable to a computer completely isolated from the network with TC also isolated.. finish the setup of everything you want. .before update.. then plug it into the network. .then restart everything in correct order.. it will work most of the time.

Help! New TV@nywhere MS-8876 card not working

Similar Messages

Maybe you are looking for