HELP! No longer able to capture HDV in FCP 6

I had a seamless FCP workflow using my Canon XH-A1 and FCP 6. I always connect my camera and power it up first before starting FCP. My settings were perfect, then about a week and a half ago FCP would no longer capture HDV from the camera. I tried redoing the easy setups: HDV > HDV:1080i60. Then I tried all the other variations. I tried trashing the preferences and restarting my computer and all that. Then I tried to see if Toast 10 would recognize the HDV camera to capture... no. But all works fine when set to DV mode. Everything about this situation seemed to have pointed to the fault being with my camera, so I sent it off to canon to check it out ($$$). Today I borrowed a friends Sony HDV that has worked fine before and it too failed. FCP is not recognizing the HDV camera. In an act of desperation, I installed iMovie and opened it up, I connected the camera... wth, it works!?! I am now convinced that there is something not right with FCP. Any help on this would be greatly appreciated!!!

I figured out the problem!!! It was "Rosetta". Hopefully this issue will help someone else in the future!
When I upgraded to Intel Mac Pro from G5, many plugins were not supported. About a month and a half ago I opened an older project of mine and had problems rendering some vital sequences with several plugins from the G5. After going through every plugin I had and reinstalling them one by one, many plugins still would not work. My solution was to use Rosetta with FCP...
I had not captured any HDV media since turning Rosetta on for FCP, and I guess forgot it was even on. I clicked on the FCP App and hit "command + i" for info, unchecked Rosetta, and instantly my HDV is capturing perfect again!
I wish I could use an abundance of prolific and explicit vocabulary words to express knuckleheadedness of my inability to not figure this out sooner...
ROSETTA was the CULPRIT of this issue!

Similar Messages

Unable to capture HDV in FCP 6.0.1 from Sony HVR-Z1P

Hi I'm attempting to capture HDV footage from a Sony Z1.
I am trying to capture some HDV footage I shot with the Z1, but FCP simply refuses to recognize the Z1
I'm certain I've got all the settings correct:
- Camera is set to HDV firewire out
- capture presets is set to HDV
- device control preset is set to Sony HDV FireWire
- sequence preset is set to HDV 1080i50 (I'm in Australia)
- footage IS HDV 1080i50
But I keep getting the "Unable to Initialize Capture Device and Device Control" popup. I've tried everything
- rebooted the camera
- restarted FCP
- rebooted the system
- changed the capture/device control settings in FCP and tried out a regular DV deck to make sure it wasn't the cable
Nothing has worked.
I'm on a MBPro I7. No Kona card or anything like that, just trying to capture through firewire.
Any suggestions would be greatly appreciated.
Thank you,
Matt
At present it will capture HDV in IMovie but not FCP 6.0.1
Message was edited by: Matt Blyth

Thanks Adrian, since posting the thread I've thought of that too but unfortunately to no avail. From other forums I've read this seems to be a central theme to the solution to my capture woes. I since have sorted the problem it was in Audio/Video Settings.
In the end I set my Audio/Video Settings to:
Sequence Preset to: Apple Intermediate Codec 1080i50
Capture Pre-HDV- Apple intermediate Codec
Device Control Preset: Sony HDV 1080i50 Firewire
And hey presto my I'm capturing HD without any problems. Thanks everyone for your suggestions.
Message was edited by: Matt Blyth

No longer able to capture screenshots on iPad Air? (iOS 8.2)

I've tried several hard resets (by holding down Sleep + Home buttons to turn iPad on & off), and I've also tried resetting all device settings - but I'm still unable to capture a screenshot on my iPad Air. The camera doesn't even click/flash or acknowledge the screenshot attempt when I hold down Home + Power as normal, and it doesn't show up in my photos. Also doesn't work when I select the "screenshot" command using AssistiveTouch. (And I've closed all running apps and cleared my history & website data in Safari).
Anyone have any possible solutions - that don't require iTunes? (Laptop is broken so I don't have a way to restore the device via iTunes). iPad has plenty of available data, and I used to be able to take screenshots with no problem. Assuming it's not an iOS/8.2 issue bc it stopped working before I downloaded the update. Help?

Try sliding the words up/down to select the various modes.

ITunes 7 Help: No longer able to import new songs onto iPod

Hello, I'm experiencing a bad problem that is completely preventing me from adding new songs to my iPod.
This problem started when I got the new iTunes 7. Whenever I connect my iPod and drag and drop the songs, it would appear as if iTunes is importing them in what I call the "status box" at the top, however when it is done and I look on the song list, the songs are not there. I can also confirm that the importing failed when I see that the memory is dropping on my iPod but then instantly rises back up.
What do I do?

Where can I download the latest version of iTunes 6?
http://www.apple.com/support/downloads/itunes605forwindows.html
As noted by some others, a working flow appears to be:
1) remove 7 using the control panel add/remove programs [some also report removing the new version of quicktime that came with 7 -- I did].
2) find the file 'iTunes Library {dateyou_loaded7}.itl' [usually in 'My Documents/My Music/iTunes/Previous iTunes Libraryes'], copy it up one directory level, and re-name it 'iTunes Library.itl'.
3) download and install the above version 605.
I had already installed the gen5 firmware upgrade that came with 7, and it seems to work fine with version 6, with no need to 'downgrade' the firmware.
Your mileage may vary.

Sony V1U Not Capturing HDV in FCP 6

Hi all
I am running FCP 6.0.2 on a Dual 2GHz PPC G5 running OSX v 10.4.11
I shot some footage on a friend's Sony HVR-V1U in 1080i. I used the 1080i 60 easy set up to create a project in FC and the log and capture window never sees the camera. I checked all the settings on the camera -- the in out menu is set to HDV, etc... all the things everyone online says to do... but still nothing.
So I tried capturing in iMovie and voila -- it sees the camera and controls it and captures with no problem...all those movies import into FC just fine, but I know that iMovie is converting the footage to a different codec...and I want FC to do what it should be able to do...so I still want to fix the problem...
The only other thing I'm wondering is do I have to be using the weird Sony proprietary "iLink" cable? (The one that plugs into the side of the camera under the LCD?) I'm just using a the usual firewire cable that I always use for cameras -- and in this case that cable plugs into the V1U at the spot that says "HDv/DV out" on the back of the camera, so I THINK I'm ok, there, but I dunno.
Has anyone had this problem? Has anyone solved it?
Thanks
Rob

I followed your list -- one menu setting I didn't see on the camera was AV/V-DV...I looked at the menus when the camera is set to VCR and also when set to Camera and I didn't find it...can you please clarify?
In any case, I followed your kind instructions to the letter (with the obvious exception as I've stated above) and still no go. One new wrinkle, though: When I start FCP now, it asks me where the external HDV device is -- it's looking for the camera even though it never saw it before...(unless it's remembering it from when I tried successfully to capture the HDV as plain old DV footage)
This is really frustrating.
Rob

Capturing HDV-ProRes

Hello,
I I have been for some time been able to capture HDV from a XHA1 to ProRes without any problems. Recently I captured with the same camera HDV to DVPal and since then I can't capture HDV-ProRes anymore. I says "Can't initialize..."
I have trashed the preferences... but that didn't help.
I you have any helpful ideas - I would be more than happy to hear them!
Best regards,
/Harald

You got it! Here's a great article for you. There's a link at the end if you need Pro Res Easy Setups for Canon and Sony cameras.
http://www.kenstone.net/fcphomepage/capture_hdv_prores_fwbalis.html
And a second article if you've already captured as HDV and want to export as Pro Res:
http://www.kenstone.net/fcphomepage/hdv_timeline_to_sddvd.html

Capturing HDV Into ProRes 422 (LT) Via FireWire

I read this fine tutorial on Moviola on the technique of Capturing HDV Into ProRes Via FireWire.
http://moviola.com/hdv_prores
Since you can choose ProRes 422 (LT) as an option in the Log and Transfer window, I was wondering if there is a way to capture HDV to ProRes 422 (LT) via firewire like in the above mentioned article.
I tried creating a custom capture setting in the AV Settings, but ProRes 422 (LT) was not available as an option, only ProRes 422 and ProRes 422 (HQ). And those settings cannot be edited or duplicated (grayed out).
I don’t know why ProRes 422 (LT) is available in the Log and Transfer window but not in the AV Settings window. Maybe it will become available in an update.
In the meantime, does anyone know a way to get around this? Maybe modifying an FCP file somewhere?
Thanks,
======
Richard

HDV is recorded to tape inside of the camera as digital information. Component coming out of the camera is analog. The camera is performing the first conversion D/A, from HDV (digital) to component out (analog).
Component going into the ioHD is analog. The ioHD then converts via its hardware to Prores (any flavor), which is digital. The ioHD has to convert the analog from the component outs of my camera to digital for use in FCP. FCP only uses digital video.
You said "The IOHD internally converts to ProRes.." converts to ProRes is the second A/D conversion.
So the path is D/A/D. I count that as two conversions, camera D/A as one the ioHD A/D as two.
I don't want to unnecessarily convert from digital to analog to digital which is why I don't use the ioHD to convert from HDV to Prores (any flavor).
Unfortunately I don't have any digital outs for this camera, neither HDMI or HD SDI.
I believe capturing and converting HDV to ProRes via firewire in FCP doesn't have this D/A/D conversion which is why I'd like to be able to capture HDV to ProRes LT via firewire in FCP and stay digital all the way, with no analog conversions.
I use the ioHD for all of my analog to digital conversions. It's a great box from a great company.
Thanks,
=====
Richard

Batch capture HDV error

I have FCP 5.14 and have just logged a bunch of HDV footage offline. I did this the normal way I would when capturing DV footage, marking the in and out point and then log the clip, standard stuff?
When I try to Batch capture the offline clips it captures only 1 frame from each clip, then the clip details are also effected, ie the Media start and media end of my clips changes from what they where into two new time codes 1 frame either side of the newly captured clip.
Is this a program error or am I just completely useless??? Can somebody help me please

Not sure if this is your exact problem, but I've had issues with Batch Capturing HDV in FCP 5.1.4 using both a Sony M15U and M25U.
The deck would seek to the appropriate place on the tape and then just jog back and forth looking for the right start point. It would do this about 3 times and then give up.
The solution for this was a DROP FRAME / NON-DROP FRAME setting in FCP. If you go to your A/V Settings and then to the Device Control Presets tab and edit your preset (If it's locked you can just make a copy of it and edit the copy - I am using the Sony HDV firewire preset). If you know what your footage was shot in (drop or non) make this setting adjustment. If you don't know, try both.
As soon as this not so little detail was checked everything batch captured without fail. Just make sure there aren't any timecode breaks on your tape.
Hope this helps.

Updated my mac to mountain lion 10.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install? Can anyone help me?

updated my mac to mountain lion 10.7.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install saying that I need to see developer. Whenever I try to open my appstore, mail or facetime it says that the programmes need to be installed and might not be compatible with this version of mac operating system. Can anyone help me?

It's not a bad install of Mountain Lion. I've had the same thing happen to me, but it affected not only Mail, but a variety of other programs including iPhoto and MS Office, where I had to delete preferences, caches, and reinstall the OS as well as the program itself. I'm still having issues with Mail, so I've gone to another program.
Everything was fine upon the initial install. I restarted my iMac about two weeks after the install, and that's when the issues began to happen. I've reinstalled Mountain Lion twice, but the same issues arise.
As I mentioned above, you'll need to figure out which preferences are causing the issue, then reinstall the program, as a fresh reinstallation will do you no good unless you wipe the drive completely.
Here's a thread that helped me with iPhoto:
https://discussions.apple.com/thread/4794375?start=0&tstart=0

Help me! After updating my iphone 3g is no longer able to call. Outgoing calls are completely silent for the recipient

Help me! After updating my iphone 3g is no longer able to call!!
Outgoing calls can be made but the recipient does not feel anything. I own a phone that is useless!

First try Resetting it: Hold down the home and sleep button, ignore the red OFF slider, wait for the Apple logo then let go.
If that does not work, Restore your iPhone in iTunes from your backup.
If that still does not fix it, Restore your iPhone and a new phone (not from backup) and see how it works. If it is doing fine you have a app you are using that is probably causing your problem. Load them one and a time until the problems recur and you will have found the one that is a problem.

No longer able to use Capture (only capture now)

I used to be able to capture with the full capture functionality (in Final Cut Express) and now I can only 'capture now'. I have not changed any of the system settings.
I confirm my camera (Sony HDR-HC7) is recognised in system profiler and I can also use the full capture (import) functionality in iMovie. But not in FCE.
Please advise.
Thanks
Paul

I think your confusion is caused because FCE and FCP handle HDV differently and therefore have different capture windows.
For normal DV they are both the same and you get this window:
However, FCE cannot edit HDV natively so it is converted during capture to the Apple Intermediate Codec (AIC).
To do this, FCE uses a simplified capture window which only permits "Capture Now" like this:-
FCP on the other hand can edit HDV natively so it uses the normal Log and Capture window like this:-
FCE has always used the simplified capture window.
The only way you can get the full window is by upgrading to FCP . . . . . . . . which is a rather expensive way of changing your capture window!
Message was edited by: Ian R. Brown

Help! I recently upgraded to OS 10.9.4 from 10.6.8, and now when I want to send an email to a group in my contacts I am no longer able to select the group as a whole. I have to select each address individually. This can't be right.

Help! I recently upgraded to OS 10.9.4 from 10.6.8, and now when I want to send an email to a group in my contacts I am no longer able to select the group as a whole. I have to select each address individually. This can't be right. With 10.6.8 I used to be able to double click on the name of the group and they would all be selected. I've also noticed that my address book is now called "contacts." Thanks in advance for your help.

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
     Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).

After Firefox updated last night, I am no longer able to use it. "Unable to connect" I have added it back through the firewall, nothing works. Help!

Starting last night, after an update, I am no longer able to use Firefox.
"Problem loading page"
"Unable to connect"
Unable to connect"
Firefox can't establish a connection to the server at.....
I have tried various things, even uninstalled and re-installed, took it out of the firewall, and added it back in. But nothing is working.
Please help!
Thank You
Mara

Hello Mara, see if the next is helpful : [https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can Firefox can't load websites but other browsers can]
also, try to boot the computer in [http://windows.microsoft.com/en-hk/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows Safe mode with network support] (press F8 on the boot screen) and check firefox again.
(If works in Windows Safe mode then probably you have problem with other software, like security software or maybe a system driver, that is running on your computer).
thank you

When I upgrade to FF 26 on my PC laptop, I am no longer able to open any web pages on any browser. Help

Whenever I upgrade to FF 26 on my pc laptop I am no longer able to open any web pages on my laptop in any browser. If I reset my system to a previous date I am good to go. Any ideas on what may be going on or how to troubleshoot it? I am not a technical person - btw
My connection to the internet still shows as connected, but I cannot open any web pages.
thanks,
Bill

Is this happening on a computer running Windows (you posted with as Mac)?
If this is an issue on a Windows computer:
It is possible that security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

HT4628 I am no longer able to iTunes wi-fi sync since I upgraded to the iPhone 5. Can anyone help me with this issue? Your help would be greatly appreciated.

I am no longer able to iTunes wi-fi sync since I upgraded to the iPhone 5. When trying to connect, it stays in the discovery mode and never connects.I have to try and pair them all over again. Then I get a message saying that my Mac Book Pro is not supported. Can anyone assist me in resolving this issue. It is an early Mac Book Pro 10 I believe. I purchased it in February of 2010.

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

HELP! No longer able to capture HDV in FCP 6

Similar Messages

Maybe you are looking for