Help! No longer supporting older IPhoto, need to get Iphoto 5 on a mac

I have an old version of IPhoto and as of 11/1 they are not going to support the picture and book add ons. Does anyone know if you can upgrade to Iphoto 5 without having a intel based mac? That is the last version that they will support. Thanks....

You can update to iPhoto 09 without an Intel Mac. You can update to iPhoto 08 with 10.4.11.
You’re not limited to iPhoto 5. You can go for iPhoto 6 or iPhoto 08 without changing anything on your machine
Regards
TD

Similar Messages

What does this mean "We apologize for the inconvenience, but the ability to order books and prints is no longer supported in iPhoto 5. Please upgrade to a newer version of iPhoto to order these products.

what does this mean "We apologize for the inconvenience, but the ability to order books and prints is no longer supported in iPhoto 5. Please upgrade to a newer version of iPhoto to order these products." I want to buy a photo book and that message keeps popping up.

TD, LN - You guys make great points and I will take you at your word. Normally, I would not hesitate to update. I have a lot at stake here with a large vacation coming up with a great many new pictures anticipated. I don't know enough to understand what is meant by "verifying my library." Please give me some insight there and I will start the upgrade process tonight! Seriously, I have wanted to do this for some time, but have been scared away by reading too many situations on these forums.
TD - you have a good sense of humor. I know all versions eventually need to be left to die away. Support is not eternal. I am sure I missed the announcement that certain versions of iPhoto would no longer offer the ability to conveniently make cards, calendars, books, etc. Like the original poster, I was surprised to learn my version did not offer that functionality only by requesting it and getting denied. Sort of frosted me at the time, as you can tell by my original reply here.
If anyone can help me with the "verifying" question, I'll get off of here and let the original poster have his thread back!

PRE9 No longer supports older nvidia card GPU's (?)

I've started this new discussion rather than continuing GPU Effects in PRE7 but not in PRE9 as this focuses more on the cards rather than the effects. In this discussion I hope that users with nvidia cards could report what their card is, and whether or not GPU Effects/Transitions show.
My nvidia 8800GT performs exceptionally well with PRE7.
Scrubbing along the timeline, or changing timeline scaling results in almost instantaneous redrawing of thumbnails.
All GPU effects and transitions are available and work well.
But with PRE9:
Scrubbing along the timeline, or changing timeline scaling, results in an agonisingly slow redrawing of thumbnails.
GPU effects and transitions are not available.
It seems to me that PRE9 is either no longer supporting older cards, or is identifying cards incorrectly. My gut feel is the first - that PRE9 is only working with *specific* video cards.
I think this because:
Adobe PRE9 Help shows:
About GPU effects
If your computer has an AGP‑ or a PCI‑based
video card, it probably has a GPU (Graphics Processing Unit). If
your GPU supports DirectX 9.x, Pixel Shader (PS) 1.3 or later, and
Vertex Shader (VS) 1.1 or later, you can use GPU‑accelerated effects. These
effects take advantage of the added video processing capabilities
of GPU cards, adding three‑dimensional realism to images.
You can find these effects in the GPU Effects menu in the Effects
view only if your computer has a supported GPU. (Some effect options
are available only if your graphics card supports Pixel Shader 2.0
or later and Vertex Shader 2.0 or later.) For details, see the system
requirements on the Adobe Premiere Elements product page
on the Adobe website.
I could not find graphics cards listed in Adobe Premiere Elements 9: System requirements. But I did find this on the Premiere Pro CS5 System Requirements:
Supported NVIDIA graphics cards for GPU acceleration
GeForce GTX 285 (Windows and Mac OS)
GeForce GTX 470 (Windows)
Quadro 4000 (Windows)
Quadro 5000 (Windows)
Quadro FX 3800 (Windows)
Quadro FX 4800 (Windows and Mac OS)
Quadro FX 5800 (Windows)
Quadro CX
It does make me wonder if PRE9 follows this restricted list of cards.
Another clue(?) is that the Adobe Knowledge Base 51526, Troubleshoot digital video playback, shows:
3. Switch the GPU playback option.
Note: This option is not present in Adobe Premiere Elements 9.0.
Adobe Premiere Elements is designed to take advantage of display
cards with accelerated GPUs. If you are having playback issues, make
sure you use the correct GPU playback mode that corresponds with your
display card.
Enable GPU Playback: The setting if you have a GPU-accelerated display card.
Disable GPU Playback:The setting offers the lowest performance but
is appropriate for display cards that do not fully support Direct 3D
So the feature to manually describe your card to PRE9 *HAS* been deliberately removed, by inference leaving it totally to the application to decide whether or not your card is supported.
I'll be posting this information at the Adobe Bug/Feature report.
Cheers,
Neale
Insanity is hereditary, you get it from your children

No, and it doesn't support some new cards in particular configurations either.
The main ones affected are the laptop hybrids in Sony Vaio. I have a Sony Vaio Z11, and the Z12 and Z13 are affected by exactly the same problem.
The nVidia video card is GT330M, which should support all sorts of things. But the most recent driver that works in this hybrid configuration (the way it is set up by Sony) is 190.xx, which presumably doesn't support this.
So PRE9 loads with an error message, but I can't see anything in the video preview, which makes editing a little difficult. It works fine in Sony Vegas though.
Sony Vaio with the auto-switching hybrid configurations are fairly common (they've sold well), and the Z11, Z12 and Z13 are a current and very powerful model (mine is Core-i7, 8GB RAM, SSD). It is a laptop that looks good, so appeals to graphic artists and video editors.
Adobe possibly needs to fix this rather quickly, because there are complaints all over the forums and I can see a lot of people dropping Adobe Premiere Elements in favour of the Sony Vegas product simply because they can't make it work. All it takes is the ability to switch OFF GPU processing! Alternatively support for this card.
Hugo

Many years ago synced iCal with Microsoft program. Since installing Lion whenever I try to create an event in iCal it flashes up message "Unable to open Microsoft sync services Power PC applications no longer supported." How do I get rid of message?

Many years ago synced iCal with Microsoft program. Since installing Lion whenever I try to create an event in iCal it flashes up message "Unable to open Microsoft sync services Power PC applications no longer supported." How do I get rid of message?

Lion no longer supports PowerPC apps. If this is Microsoft Office 2008 (Entourage 2008) then you should disable the syncing services. (I don't have Office 2008 installed anymore so I don't know exactly what it's called anymore.) If you have Microsoft Office 2004 or earlier, then it can't be run on Lion at all since Lion removed Rosetta, which is what allowed a PPC app to run on an Intel based Mac.
Also, I believe Microsoft removed sync services from the current Outlook 2011 (which replaces Entourage) so even upgrading to a newer version of Microsoft Office will not get you back that calendar sync feature. Supposedly Microsoft is working on a new syncing system, but I wouldn't hold my breath.

Have to reinstall adobe photoshop cs4, but adobe AIR version no longer supports the version need an updated version?

Have to reload adobe photoshop cs4, but the adobe AIR version is not longer supported. Where can I download the updated version to support the program?

http://get.adobe.com/air/

Mac start up wont work. I have tried safe start, command s / v , command r, pram, and more. Nothing helps!!! I really need to get back onto it. PLEASE HELP ME

My mac is only a year old. I am still under warranty but don't want to have to go to the store. I know it has something to do with not connecting to my hard drive and I want to make it clear that IT HAS NOT BEEN DROPED,BANGED OR DAMAGED IN ANY WAY!!
Here is what I have tried so far:
For safe start The loading bar shows up but then doesn't load. After a few seconds it disappears and the wheel continues to spin.
I have tried PRAM but it doesn't help at all.
The only way I can get it off the start off page is to either go to fsck or Mac OS utilites.
Fsck comes up as an error message for me when I put in fsck -FY. /sbin/fsck -FY also doesn't work.
Mac OS utilities really also doesn't much. When I try to back up my hard drive it recognizes the external drive but then has no where to put it to??? So then I tried reinstalling the lion software part bit it won't allow me because for some reason it is locked. So I also try to verify and repair my drive. An error message comes up so I know there is something wrong. But not what to do about it. So now I am here on the Internet.
I Really need to get this fixed!!! PLEASE SOMEONE PROVIDE ME WITH AN ANSWER TO HELP FIX MY PROBLEMS.

My mac is only a year old. I am still under warranty but don't want to have to go to the store. I know it has something to do with not connecting to my hard drive and I want to make it clear that IT HAS NOT BEEN DROPED,BANGED OR DAMAGED IN ANY WAY!!
Here is what I have tried so far:
For safe start The loading bar shows up but then doesn't load. After a few seconds it disappears and the wheel continues to spin.
I have tried PRAM but it doesn't help at all.
The only way I can get it off the start off page is to either go to fsck or Mac OS utilites.
Fsck comes up as an error message for me when I put in fsck -FY. /sbin/fsck -FY also doesn't work.
Mac OS utilities really also doesn't much. When I try to back up my hard drive it recognizes the external drive but then has no where to put it to??? So then I tried reinstalling the lion software part bit it won't allow me because for some reason it is locked. So I also try to verify and repair my drive. An error message comes up so I know there is something wrong. But not what to do about it. So now I am here on the Internet.
I Really need to get this fixed!!! PLEASE SOMEONE PROVIDE ME WITH AN ANSWER TO HELP FIX MY PROBLEMS.

Does iTunes no longer support older iPods?

Does anyone know if Apple has discontinued support for older ipods (in my case, a 2nd gen classic, 20gb, released in 2002). ITunes will no longer recognize this ipod since iTunes ver10.6. I thought maybe iTunes 11 would fix it, but it has not. This is on a mac mini, 2009 edition. I then tried it on a PC laptop which still has iTunes 10.5, and the ipod was recognized.
I don't use the old ipod much, but I would still like to change the music on it from time to time.
Any insight would be appreciated.

Huh. I just downloaded iTunes 11 a couple days ago, and my iPod (a 2nd generation iPod nano, 4 GB) still works. I think it should work.
What I did, is I had my iPod connected back when I converted from like, iTunes 10.5 to iTunes 10.6, I think maybe the iTunes can then be recognized? I know when I had iTunes 9.(something...), and I tried connecting to a computer with 10.9 (I think. well, one of those), it wouldn't work. So maybe, you have to go step by step? Although my iPod wasn't connected when I was upgrading to iTunes 11, so that's just a theory.
Try going on the PC laptop and then keeping your iPod connected when upgrading to iTunes 10.6, see if that works

I have just installed 10.7 Lion and get the following message when trying to open a Microsoft Office for Mac 2004 product "You can't open the application Microsoft Entourage because PowerPC applications are no longer supported." What needs to be done ?

What needs to be done to regain my Microsoft Office for Mac suite that I lost when I installed Mac os 10.7.3 Lion upgrade?

boyfromoz wrote:
Shootist007 wrote:
Or you could just wipe out Lion and restalled Snow Leopard. Then when you are in the market for a new computer, desktop of notebook, buy something other then Apple.
why would you say things like that here? if you are a windows one then stay there. but you are not polite or helpful and if can't use Apple i wonder why you would come here to tell all about your sad story. I don't understand that it has nothing to do with question asked.
I own, or should I say have owned, several Apple products. Including a new MBP.
I also use Windows.
I will say anything I like in an effort to help people overcome problems they are having with Mac's and computers in general.
Being a Apple Fanboy is not required for membership on this forum or trying to help other Mac users.
And just how is suggesting to remove Lion and to go back to Snow Leopard not helping the OP in his quest to make his already owned and paid for MS Office software work? If it is isn't broken stop trying to fix it. Snow Leopard is a fine OS. Lion is still in Beta, only Apple hasn't told anyone. And yes I run Lion on my new MBP but I also have a partition with Snow Leopard on it.
Thank you and have a great day.

Are faces no longer supported in iPhoto 9.6?

I'm running iOS 10.10.1 & iPhoto 9.6. I opened iPhoto the other day & got a prompt saying iPhoto needed to run a repair. I clicked on the repair link & the next time I opened iPhoto, everything in the Faces library was gone. There are what looks like blank photos with all the correct names, just nothing attached to the blanks. The photo library is intact, just the Faces library seems to be gone. Can anybody give me some ideas on how to fix this or if it's even possible to fix?

Did try launching iPhoto using the option + command key and select the options in sequence?
iPhoto faces cork board doesn't show faces

Help needed with getting Audio signal through to Mac Book Pro (using Logic 9 & Behringer Xenyx 1204USB mixer)

Ok so I am sure I have everything set up correctly,
Logic has recognised and is using the mixer, I have sound coming through the headphones when I put in a drum sample onto audio track, no signal going in from audio using the first channel. Audio channel is set up with correct inputs & outputs. USB setting used on mixer......phantom tried on and off with the condenser mic I am using.....still no luck not even changing from mi to guitar. No signal when recording audio...... AAAHHH HELP! Racking my brains!
Thank you in advance

Kudos to figuring it out yourself.
Yes, Logic is geared to the professional user, you will need to set up the program to your particular way of working, Logic was well developed for professional use long before Apple purchased it, it's not an Apple program per se. It's complex and offers a myriad number of choices so that it can be configured to many styles of working, there's often 3 or 4 ways to perform the same function.
Logic insists the user educate themselves... which is a good thing.
Here ya go!
http://documentation.apple.com/en/logicpro/
"Exploring Logic Pro" is a good one to start with.
Also in the main manual... "Setting Up Your System"

Help! I know nothing and need to get my info from my Curve onto my Pre

Ok first off I know nothing so please don't use any techincal terms or assume that I know what an OS something is because I promise I don't. What I need is to simplely get the info off my Blackberry Desktop Manager onto my new Palm Pre. I've been at it for days and trying to decipher all the lingo on here and I guess I'm not smarter than a 5th grader because I can't figure it out.
What I need to know is step by step instructions. Don't tell me I can save 19.99 if I do certain steps myself because I really just want the easy way out. Please people have pity on me - I can't even figure out my kids PS3.
So I don't have anything important in Outlook or any other program than my Blackberry Desktop Manager. I appreciate any help from those willing to help my lost self. Thanks a bunch!

In order to transfer your data to the PRE you will need to have your data in Outlook. Once you have your data in Outlook, you can use the Palm Data Transfer Assistant to transfer your data to the PRE.
Here is an article on how to setup your Blackberry to sync with Outlook. If you have trouble with this, you will need to call Blackberry support for assistance.
http://www.ehow.com/how_4502616_sync-outlook-blackberry-via-usb.html
Once you have the data in Outlook, you can call Palm for setup assistance at the following number, 1-866-750-PALM.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/pre/p100eww/sprint/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

HELP!!! ... need to get Window Handle using PDA module

I am trying to find a way to get the current window handle using the PDA module. I need this handle to call other function via Win dll's. Has anyone done this before? Any help would be greatly appreciated (using windows mobile 6.1 and Labview PDA 8.5) Thanks
Greycat

Thanks Mike ...
I understand that this function does exist, but somehow I am not writing my wrapper properly or calling the function properly because everytime I build my labview app I get a "GetForegroundWindow is a missing VI or C file." - I cannot for the life of me figure this out ... what I was really asking is if anyone has succeeded calling this function and getting the Window Handle. What I really want to do is run my Labview program on the PDA in full screen mode with no title bar and no SIP button visible or accessible, but to my knowledge, that will take a function call to the aygshell.dll (namely the SHFullScreen function) and that function requires a window handle to work properly ... any more help would be appreciated ... Thanks again
Greycat

What do I need to get better sound from my Mac mini

The sound from my external speakers is very poor. I am hard of hearing(50% in one ear) and I find it very difficult to follow a conversation etc.
I am now on Yosemite, and the speakers have been used on all my previous pc's successfully. I cannot find a control for the built-in audio, does one exist?

What do you mean by poor sound?
The Sound is controlled by System Preferences>Sounds>Output

I need to get away from iphoto.   I use pixelmator for editing almost exclusively. I have a Sony disc hx200v camera and a Kodak.   I will need to know if my cameras (on mac) will be seamlessly supported and how to get all my existing photos safely to lig

I have several questions.   iPhoto does not meet my needs.    I would use lightroom mainly for organization and downloading photos from my camera cards.   My cameras are Sony disc-hx200v and a little Kodak I will need to know if they are fine with light room. Also I use pixelmator for photo editing and likely will use iskysoft dvd maker for mac to create my dvds once edited.      I am desperate to find a way to make my work flow work.   i.e.   I need to get photos somewhere on my mac, in this case it would be lightroom then I need to edit them in lightroom and pixelmator, then be able to get that album/slideshow/folder whatever you call it Into the dvd maker to voiceover and finish the project.      It looks like aperture would have been more to my taste but they are
also taking that away.   Yeah! Go Apple.   About all I will have left of use is an operating system and mail.     Will appreciate any help. I am 73 and doing dvd's for Amazon so I really can't afford any more programs that are snatched away and learning curves that change every 6 months.

Are you shooting in raw or jpeg?
I’m not sure there is raw support for your Sony model and you don’t say which Kodak you have. But for jpegs Lightroom will normally work.
For your existing photos it would usually be necessary to export versions to the desktop or create new folders in Finder. Those duplicates will contain the editing adjustments you have already made and can be imported into Lightroom using “Add” in the import dialog.
I would suggest you download Lightroom and use it free for 30 days. You can then test it to ensure it meets your needs. You can download from this link:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5856

TS3938 I can't print because PowerPC applications are no longer supported?

What has happened to my printer connection? I received the "you can't open the application 7100 Series Utility Launcher because PowerPC applications are no longer supported. I need help.

Your printer appears as compatible with OS X Lion and Mountain Lion, so there are newer drivers for your printer.
Make sure that your printer is turned on. Then, open System Preferences > Print & Fax, and press the + button to add the printer. Then, just choose your printer and it will be added. Do you see your printer?
Also, you can try installing the Lexmark drivers before doing that > http://support.apple.com/kb/DL1397

Help! No longer supporting older IPhoto, need to get Iphoto 5 on a mac

Similar Messages

Maybe you are looking for