HELP! Nokia 3220 not recognized through DKU-5 cabl...

Hi Gurus,
The story seems known, but I'm very complicated with this. I have a Nokia 3220 phone and a non-Nokia DKU-5 cable. My PC have Windows 2000 SP4, I installed the driver from the CD of the cable's manufacturer, restarted the computer and verified the virtual serial port, that apparently is well configured.
Following, I installed PC Suite 6.80.22 and connected the cable, then with the Connection Manager configured the port and finally connected the phone, but the program waits indefinitely.
The phone says "Accesory not compatible". Which should be the speed of the COM port? has some relevancy for the communication with the phone?
Thanks everybody for any help that can give to me.
Luis Duarte
Santiago, Chile.
P.S.
I attempted to install in a PC with Windows XP and the results were the same.

I think your Nokia phone tries to tell you the facts: the assessory is not compatible

Similar Messages

My computer is not recognizing my apple usb cable what do I need to do

my laptop is not recognizing my apple usb cable I'm using windows vista what should I do? my Ipod is disabled and I need to connect it to itunes so my iphone for and update.

Try connecting your Mac to the Time Capsule with an Ethernet cable to see if that lets AirPort Utility "see" the Time Capsule.

Mypassport Wireless not recognized through USB on my Mac

I can connect to my Mypassport Wireless fine, but it's not seen through USB on my Mac. I've done a manual reset several times. And the Lock setting is off. Can anyone help? Thanks.

Btw, it's been working fine on both my two Macs for the past week since I've bought it. I've also been plugging it into the USB port of the laptop while powered on and Finder recognized it right away. Now, all of a sudden, neither laptop can see it through USB. I've tried the manual reset, and then powered it down, plugged it into the USB port, and it automatically wakes up, but Finder doesn't show it. Please help. Thanks.

Help! Itunes not recognizing Ipod Nano. Have tried several things already.

Itunes does not recognize my ipod nano (6th generation). When I plug it in to the computer, nothing happens (except it charges). I have tried several of the recommendations (reinstalling itunes, resetting ipod, etc. etc.) I have Windows 7 on my computer with the latest version of Itunes. Interestingly, when I plug my Ipod into my other computer (which still has an older version of Itunes), it syncs right up and is recognized.
What can I do to get Itunes to simply recognize my Ipod? I am beyond frustrated.

iOS: Device not recognized in iTunes for Windows - http://support.apple.com/kb/TS1538

Iomega Home Media drive not recognized through Aiport Extreme

Using ethernet cable, my new Iomega Home Media drive is recognized when connected directly to my iMac, but is not recognized when connected to my Aiport.
Any ideas?

The AirPort Extreme wants to see a drive that is formatted in Mac OS Extended (Journaled). My guess would be that your drive may be formatted for Windows?
You can reformat your drive by connecting to your computer and using Disk Utility.
Hard Drive > Applications > Utilities > Disk Utility
You may also have documentation that came with the drive that furnishes directions for reformatting the device.

Really frustrating - Macbook not recognizing built-in ethernet cable

I am a college student who purchased the macbook one year ago
My macbook is not recognizing the ethernet cable plugged into it.
I thought it was the ethernet cable itself but I tested my roommate's cable and it wasn't also recognized (his computer's internet works fine)
This is frustrating because I am relying on the college wireless and the signal is flaky at best from my dorm
I am guessing that either some harddrive or software is messed up
Anyone can help me?
Do I have to go to the apple store? My warranty is expired and a very busy semester is about to start so I don't want to send it in for a long time

Have you used the MacBook in multiple locations in the dorm (on the same subnet)? If you connect through a mini-hub or -switch (rather than plugging directly into the Ethernet port provided by the school), the hub or switch may be holding on to the MacBook's MAC address even when the MacBook is disconnected. When you then plug in in another room, the school's networking equipment may think that the same MAC address (the same computer) is connected on two ports at once -- which just doesn't work. You may get an IP address, but be unable to do anything; or you may get a 169.x.x.x IP address. The school's networking folks can look at the network infrastructure equipment -- the big switches in the wiring closets -- to see if the MAC address is registered on multiple ports.
The best solution is to replace those bad min-hubs or mini-switches -- they shouldn't hang onto MAC addresses for computer that are no longer connected. But if that's not an option (or just to test the theory), unplug (power off) every hub or switch you have plugged into, and see if you can get online after powering them up again. You would have to power cycle the hub or switch every time you use one.
Another test is to try to connect somewhere else on campus, on a different subnet. If it also doesn't work on another subnet, the solution described above does not apply. There are other potential culprits, such as the subnet running out of IP addresses, rogue routers installed by other students, and needing to register for the school's network, misconfigured network settings, and of course, defective hardware. You might try starting up from the MacOS Installer disc and running the Network Utility to rule out misconfigured network settings.

IPhone not recognized by car HDMI cable

I have an HDMI cable that plays my iphone in my car as well as charges it. Ever since the upgrade to iOS 5.1 I get the message that "iPhone does not recognize this."
Please help I paid a lot of money and it worked fine until the upgrade. What can I do??

Rather than create another "iPhone not recognized by iTunes" thread, I'll add to this one. I have an iPhone 3G 8GB.
After going through those steps you listed, my Windows XP installation always reverts back to the old Windows Apple iPhone drivers which only sees it as a camera. I've had it set to only pull from the iTunes drivers by specifying "Don't search, I will choose the driver to install" in the Hardware Update Wizard. Windows still doesn't like the iTunes drivers stating "the specified location does not contain information about your hardware". This location is the same as you noted: "C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers" which contains:
usbaapl.cat
usbaapl.inf
usbaapl.sys
All dated 7/22/2008.
My current drivers for the iPhone in my setup are still the MS drivers, version 5.1.2600.0.
usbscan.sys
ptpusb.dll
ptpusd.dll
Any help would be appreciated! Thanks!
-Alex
Message was edited by: Cassiux
Message was edited by: Cassiux

Nokia 5800 not recognizing Nokia HS-45/AD-54 Music...

I am having issues with the Nokia HS-45/AD-54 Music Headset that comes with the Nokia 5800. It was working fine untill yesterday at which point the phone is no longer recogniziing it as a valid accessory. Has anybody else had this issue. I have rebooted the phone but still the problem persisits.
The phone is running firmware version V20.0.012
Thanks for any help that you can provide

How is the audio quality of HS-45, AD-54? I use HS-47 with my 6110 Navigator and the 'bass' produced from it is terrible even with bass-boast in "off" position. I want to buy a new headset.
I also found HS-81 with Sennheiser logo. I'm not sure whether it comes with ff and re buttons. It didn't mentioned in "features" and the picture shown is not distinct.
Please help me comparing sound quality of following headsets:
1) HS-44 AD-44
2) HS-45 AD-54
3) HS-81
Thanks in advance.

Help! nano not recognized by toshiba

Hello! I know that iPod connectivity with Toshiba laptops seems to be quite a problem here, and unfortunatelly, I have become the next victim of this frustrating issue.
Yesterday I got the iPod nano 1G, installed the latest iPod updater, the latest iTunes, but both of them do not recognize the iPod. I roamed through the discussions here, I tried the 5Rs, I tried HP USB Disk Storage Format Tool numerous times, turned the USB connections off and on, and so on and so on, but absolutely nothing will help. I think there's nothing I haven't tried yet, expect for THE solution...
Windows recognizes the iPod as a F:Removable Disk witrh nothing in it, you cannot format it. If you try formatting with the HP USB Tool, it will say "Device is protected" and if I try to change the drive name, it will not even show up in the Disk Manager.
I came until the point where iPod Updater tries to restore the iPod, but at the end it will say "Cannot mount".
It's a desaster! My iPod Shuffle was working perfectly with this rather new laptop. (I broke it, that's why I bought the nano) I expected to enjoy the nano in the same wyay, just plug and play, but this has become a nightmare since NOTHING seems to be working.
If anyone can help me please, I would regain my faith in apple again... thank you!
Toshiba dynabook Windows XP Japanese Laptop PC

i solved the problem!!
even no one replied to this, i will describe shortly what i did, for every one who runs into the same problem!
the reason itunes could not recognize ipod was that the usb 2.0 drivers for my toshiba dynabook were outdated or just BAD.
so i looked for updates for my dynabook, updated everything i could find.
restarted the pc and boom! - itunes and ipod connect and you find me laughing on the floor.
so, i update your system, your usb drives and see if it works. it solved all the other problems i had with my usb connections before (like with my mouse and digital camera).
i described the same thing in this thread: http://discussions.apple.com/thread.jspa?threadID=580625
Toshiba dynabook Windows XP Japanese Laptop PC

Nokia 5230 not recognized by Ovi Suite

Hello, Ovi Suite no longer recognizes my Nokia 5230 since I switched to version 3.0.0.284.
Windows Vista and Nokia PC Suite recognizes it.
I uninstalled and reinstalled Ovi suite but to no avail.
Thank you for your help.

Thank you for your feedback.
Could you please provide us the log files?
1. Here are the instructions for attaching log files:
- Open Nokia Ovi Suite 3.0.0.284
- Enable log gathering by double-clicking the enable_logs.js file in installation folder C:\Program Files\Nokia\Nokia Ovi Suite
- Click the button to start enabling the logs when prompted by the dialogue
- Click the button to confirm the "Logs are enabled" dialogue
- Exit Nokia Ovi Suite from File - Exit. This is mandatory! Closing NOS to system tray is not enough!
- Open Nokia Ovi Suite again
- Try to reproduce the error you are reporting
- If the error still exists, double click the collect_logs.js file in installation folder C:\Program Files\Nokia\Nokia Ovi Suite
- Click the button to start collecting the logs when prompted by the dialogue
- Click the button to confirm the "Logs collect & zip finished" dialogue
- Attach the NOS2_logs.zip file in C:\Temp\NOS2 folder and screenshots in the error reporting form
- Go to your %TEMP% folder, which can be found by entering %TEMP% to the Windows Explorer's address bar. Then search debug_log_date.txt in this folder, where date is the current date (or choose the latest one) and attach also this file in the error reporting form. The exact %TEMP% folder paths are:
In XP: C:\Documents and settings\your_username\LocalSettings\Temp\
In Vista and Windows 7: C:\Users\your_username\AppData\Local\Temp\
- Disable log gathering by double-clicking the disable_logs.js file in installation folder C:\Program Files\Nokia\Nokia Ovi Suite
- Click the button to start disabling the logs when prompted by the dialogue
- Click the button to confirm the "Logs are disabled" dialogue
You can send these log files, system information details to [email protected] mailbox

Help! iPad 'Not Charging' through AC charger

I have two iPad's, one first generation and one second generation. I also have an iLuv charger/dock which works fine. But when I try to charge them through an AC charger it says 'Not Charging'. I know they're old but help needed please!!

Hello geraldineoshea,
It sounds like you are getting the message "Not Charging" when using one specific charger. It sounds like the issue is not with your iPad since it is happening with two different iPads. I found an article that discusses this message:
Note:Some USB 2.0 ports and accessories do not provide enough power to charge iPad. When this occurs the message "Not Charging" appears in the status bar next to the battery icon.
The article also provides a table to show what adapter is compatible with your device. For the iPad models you have, you will need a 10W or 12W adapter. You can find the full article here:
iPad: Charging the battery
http://support.apple.com/kb/ht4060
If you are still having the problem after verifying you are using the correct adapter, there may be an issue with that specific adapter you are using. Thank you for posting in the Apple Support Communities!
Best,
Sheila M.

Nokia 6205 not recognizing pics on memory card

My brand new Nokia 6205 won't recognize my pictures from my old phone and load them onto this new phone. They're saved on my SD memory card.
I have pictures of my dog that I lost on mothers day. I've missed him since he passed away and I want to use them as my wallpaper like I did one my old phone and they won't come up anyone know how to get this phone to recognize them
I'm madder than a wet hen over this it's the whole reason I picked this phone because of the removable memory
Thanks for any help

17-Sep-2008 03:19 PM
edna wrote:
My brand new Nokia 6205 won't recognize my pictures from my old phone and load them onto this new phone. They're saved on my SD memory card.
I have pictures of my dog that I lost on mothers day. I've missed him since he passed away and I want to use them as my wallpaper like I did one my old phone and they won't come up anyone know how to get this phone to recognize them
I'm madder than a wet hen over this it's the whole reason I picked this phone because of the removable memory
Thanks for any help
Insert your old memory card to a card reader - and connect it to a PC. Then copy the files to your new microSD card.
Nokia 6205 is an exclusive phone made for Verizon right?

Help - Imac is not recognizing Ipod, Ipod already in use?

Hoping someone can help. I am posting this in this forum and in the Ipod forum, since I am not sure where it should go.
My son has a new G5 Imac that has been working great. He has the 60 gig Ipod Photo that has been re-configured from his original PC to now use with the IMAC and it has been working great, until now.
He had a problem with his IPOD and received a bad nasty error message and had to have it replaced under warranty. Tonight he plugged the new IPOD in and the IMAC did not immediately recognize it at all. So went to install the software and his IMAC told him that the IPOD needed to be updated, and when he went to update it he got a message stating that it is in use by another program and cannot be loaded or modified. There is no other program that is using the IPOD at the moment that he knows of.
I am hoping that this is a situation that can be easily rectified. I am a MAC novice and have no idea where to begin. Thank you!!!

Is it mounted in Itunes Maybe?
--Spire

HELP! ipod not recognized

I recently updated Itunes, and since then, my itunes and ipod updater does not recognize my ipod. 'my computer' shows it, but not my itunes. ps- i've been usning this successfully for over a year, until updated itunes. Anyone?

I don't know if this will help you but the same thing was happenign with mine. I went to My computer and right clicked. I opened the device manager and went to drives. I double clicked on the apple ipod device and it brought up this little screen. I went to the volume tab and pressed populate and what do you know it worked!!!!! I don't know if it will work for you but it helped me.

Nokia 6682 not recognized by iSync (using usb cable)

Isync does not recognize my new Nokia 6682 when using a USB cable. My Powerbook does not have Bluetooth. I also don't see an icon on the desktop or any other evidence that the phone is connected to the powerbook. Do I need to change any settings on the phone or the powerbook?
1 Ghz Powerbook G4 Mac OS X (10.4.7)

Welcome to Apple Discussions.
Synchronization and file transfer to Nokia supported mobile handsets and smartphones is not supported via USB - you must instead use Bluetooth. As a general rule, such events are supported via USB only with Motorola mobile handsets.
To address you issue, you should purchase a D-Link DBT-120, the only third-party external USB Bluetooth module explicitly supported by Apple. You can learn more about Bluetooth in the Bluetooth Other Devices forum, here:
http://discussions.apple.com/forum.jspa?forumID=1003

HELP! Nokia 3220 not recognized through DKU-5 cabl...

Similar Messages

Maybe you are looking for