Help!(not regarding 4.0)

so, my 2nd gen ipod touchis having problems with the earphone jack, i have to wiggle around the conector of the earphones in order to get the sound to play out of both speakers, otherwise it only plays out of the right one):

First I would try another set of headphones. If they act the same way, the IPods input jack is probably shot. If another set of headphones work OK, clean the output jack on that other set with alcohol and a paper towel. Hopefully cleaning it will do it.

Similar Messages

  • I am facing a problem in my IPod . it is not detected by computer i tried every possible thing i changed cable i installed new itunes still its not coming up in itunes. can you please help me regarding this problem.

    i am facing a problem in my IPod . it is not detected by computer i tried every possible thing i changed cable i installed new itunes still its not coming up in itunes. can you please help me regarding this problem.

    This is for Windows: http://support.apple.com/kb/TS1538

  • TS3694 Hallo I can not restore my iPhone with the computer any more. Error 1015 comes up. Any help? Regards Christiane

    Hallo I can not restore my iPhone with the computer any more. Error 1015 comes up. Any help? Regards Christiane

    Your only hope is to place your phone in to DFU mode and restore it using iTunes (if iTunes allows you to).
    Search in Google "Force iPhone in to DFU mode" and follow the instructions precisely.

  • I just upgrade to lion on my iMac and also did the switch to iCloud and Paralle destop doest not what to open anymore .It says reactivate your mac and try again. What should I do now ? thanks for your help. Regards Eric

    I just upgrade to lion on my iMac and also did the switch to iCloud and Paralle destop doest not what to open anymore .It says reactivate your mac and try again.
    What should I do now ?
    thanks for your help.
    Regards
    Eric

    There's no need to go to the store if you don't want to. You can purchase and download the new version from the Parallels web site. In fact if you want to try it out, I believe you can do the download and get a two week trial version. Later you can purchase the serial number to make it official.
    I cannot be certain about your data, but I did not lose anything when I updated to Lion and faced a similar situation.
    Best of luck.

  • Adobe creative cloud product online help not working. Any idea what is the reason ??

    Adobe creative cloud product online help not working. Any idea what is the reason ??
    I have to manually copy pdf file to open help for all suite....

    Please try another browser, if still it is not working, check the internet connectivity http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    In case the issue is still not resolved, do contact Adobe Support.
    Regards
    Rajshree

  • Help needed Regarding Project Server - 2013 Workflow

    Hi All,
    I am new to Project server 2013 Workflow, hence please help me regarding this. Pardon me if this question is too trivial. 
    I have created a project type associated with a workflow and my workflow is as follows :
    So I am not doing anything here, I am just testing the workflow as mentioned by technet site : http://technet.microsoft.com/en-us/library/dn458865(v=office.15).aspx
    But it is mentioned that, after a minute or 2, the workflow state will change, also they have mentioned to press the Submit button.
    But in my case, the workflow is not moving to next stage [It just says 'The workflow is still processing - which never changes after hours] or I am getting the submit button (Submit button is disabled on the ribbon). Below is the state of my workflow :
    PS : I have made the user added to Portfolio managers group as well. But still I am having this same issue. 
    The Workflow manager is installed properly, and it is working fine in case of List workflow. I am facing the issue only wrt Site workflow for Project server 2013.
    Please help me to solve this issue.
    Thanks,
    shanky

    Hi Kiran,
    I am now facing issue while assigning a task to a person in the workflow.
    I am having a person named say 'John' , who is included in Project Manager as well as Portfolio Manager.
    And I am using a workflow as :
    Stage : Conceptual
    Assign a task to John (Task outcome to Variable: Outcome5 | Task ID to Variable: TaskID3 )
    Transition to stage
    Go to Approval
    But this is again giving issue as :
    Workflow Internal status : Cancelled
    Details: System.ApplicationException: HTTP 401 {"error":{"code":"-2147024891, System.UnauthorizedAccessException","message":{"lang":"en-US","value":"Access denied. You do not have
    permission to perform this action or access this resource."}}}
    PS : I have used the same Sharepoint admin account for 'Account Name' in ‘User Profile Sync' , Is this causing the issue? Please let me know.
    Thanks,
    Shanky

  • Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help .  regards Cindy

    Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help .  regards Cindy

    Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
    Some basic printer troubleshooting steps before worrying about a printer driver:
    1. Have you tried turning the printer off and back on?
    2A. Is the printer attached with a cable?
         If yes, have you tried unplugging and re-plugging both ends of the printer cable?
         If that does not help, can you test the printer with another cable?
    2B. If your printer is not connected to the computer with a cable, have you tried restarting your printer (assuming wireless connection)?
         Have you tried restarting your wireless router?
    3. Have you tried restarting your MacBook? (Be sure to save your work first.)
    4. Does the printer have ink? (Doesn't usually generate a 'communications error' though)
    5. Have you updated OS X or the program you're trying to print from recently?

  • Help needed regarding BADI.

    hi all,
    can anyone plz tell me how to define BADI and how create an interface.
    plz tell from everything regarding that, i have work with basic ABAP only.
    anykind of links and any kind of matter will be helpful and you will be rewarded with points for your help difinatly.
    regards.
    raman.

    Hi Raman,
    Please search the forum and you have lots and lots of links in it. For you to start with, try these links,
    The specified item was not found.
    BADI
    Best Regards.

  • Help needed regarding font sizes

    Iam generating pdf documents using oracle developer's report builder.
    When i generate and view those pdf's using the web previewer thay appear to be quite fine,whereas when i host them on ias the font sizes gets bigger, thus lot of text gets truncated.
    Is there any parameters that has to be set for it.Pls help

    Hi Amit,
    Thanks alot for your reply. Its really helpful for me.
    So,we usually enter these relationships manually only, right? Before going ahead with the custom program, could you please let me know whether there is any SAP note related to this.Once again thanks alot for you help.
    Regards,
    Kishore.

  • Help needed regarding the updation of "Relationships" in BP

    Hello Guys,
    This is to request you to kindly help me regarding the following.
    We have a scenario where all the employees assigned to an Organizational unit (in PPOMA_CRM) are not showing in the "Relationships" ("Has Employee")in the BP transaction of that Organizational Unit.
    Could anyone let me know whether there is any update program that updates the "Relationships" from the Organizational asssignment. Or we need to enter the employees manually in BP "Relationships". Please help. Thanks in anticipation.
    Regards,
    Kishore.

    Hi Amit,
    Thanks alot for your reply. Its really helpful for me.
    So,we usually enter these relationships manually only, right? Before going ahead with the custom program, could you please let me know whether there is any SAP note related to this.Once again thanks alot for you help.
    Regards,
    Kishore.

  • RE: Help required regarding to upgrade from R/3 4.6c to mySAp ERP 2005

    Hi there
    I need help as we are planning to upgrade from R/3 4.6C to my SAP ERP 2005, I need the help in the context that
    . How much it will effect the prevoius functionalities, business processes user exits, reports, transactions and etc which thing one should have to keep in mind I need an general overview on this.
    2. What is the SAP best practice for Upgrade.
    3. Which things should be consider before upgrade.
    Thanks and Kind Regards
    Sohail

    Hi Sohail,
    For functional improvement between the releases you can find information in the release notes for example http://service.sap.com/releasenotes
    Also you can find http://service.sap.com/upgrade for very useful entrypoint for any information regarding upgrade.
    For more information, please check this links.
    http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
    http://www.sap.com/solutions/business-suite/erp/index.epx
    https://websmp103.sap-ag.de/~form/handler?_APP=00200682500000001266&_EVENT=DISPLAY
    Hope this will help.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • Hierarchy node Variable: F4 Help - Not showing Master data values

    Hi,
    We're having some problems trying to display the F4 help of a hierarchy node selection variable, to show the master data values so that it would look more complete for the users during report execution.
    In the RSD1 setting for the info object, under 'Business Explorer' tab, the 'Query Execution Filter Val. Selectn' is set to 'Only Posted Values for Navigation'.
    I thot that we could overwrite this setting at the Query Designer level, but it does not seem to work.
    Even tho in the Query Designer, we have already specified the 'Filter Value Selection During Query Execution' to 'Values in Master Data Table', it does not seem to display the master data values.
    There is no difference in the F4 values being displayed for the hier node variable, before and after the change in Query Designer.
    Could anyone share some tips on other possible solutions to get a hier node selection variable's F4 help to show the master data values, without changing the RSD1 setting at the info object level please ?
    Thanks in advance for your help.
    Regards,
    Femmie.

    Hi,
    Could you please share the steps you have taken to fix the problem?
    We do have a similar problem and for some reason the newly added hierarchy node for 0Profit_ctr is not showing up in the variable selection screen F4 (input selection for query execution). However we can see this node when we display that hierarchy in RSA1. I did try applying the changes recommened by Jerome but unfortunately it didn't work.
    Any help on this would be greatly appreciated.
    Thanks,
    Krish

  • Please help me regarding error in jcManager 1.1

    Hi Friends..
    perhaps this question especially for bebecanu, but perhaps i hope all of you could help me too.. :)
    i tried to learn how way jcManager works, so i downloaded the jcManager1.1 source..
    i created new application in Netbeans 6.9, and then i copied all of files in the jcmanager.source..
    i've set the libraries needed also in Netbeans, i've added the libraries of jpcsc.jar and looks-2.1.4.jar , so assume that there's no error while compile time..
    but while runtime, there's message error displayed in the TextArea..
    this is the message error :
    Exception in thread "Thread-3" java.lang.NoClassDefFoundError: Could not initialize class com.linuxnet.jpcsc.PCSC
         at com.braicu.jcm.card.CardWorker.disconnectCard(CardWorker.java:507)
         at com.braicu.jcm.JCManager$22.construct(JCManager.java:620)
         at com.braicu.jcm.layout.MySwingWorker$2.run(MySwingWorker.java:108)
         at java.lang.Thread.run(Thread.java:619)so, how to initialize class com.linuxnet.jpcsc.PCSC in Netbeans?..
    Please help me regarding this..
    Thanks in advance..

    Hi
    You need to have jpcsc.dll (you may find it in the res folder) in your java library path.
    So, all you need to do is to specify this VM argument on running:
    -Djava.library.path=res
    Hope it helps
    Stefan

  • Please help me regarding role upload ?

    Hi All,
       installed CRM business package in portal. took CUA as user base. now assigning of users to roles is a concern for me.
    i.e. CRM 4.0 and BW 3.5 already comes with some predefined roles for portal, for ex : PCCCAMPAIGNMANAGER*
    I assigned an user X in CRM and BW system and I want the same user assignment to be used in portal. so I used "Role upload". i.e. I uploaded CRM user to role assignments to Portal, so I got that under migrated content --> sap component systems --> name of crm system --> under that my role (PCCCAMPAIGNMANAGER).
    Now I added the portal role com.sap.***.CampaignManager (portal specific) to this role by "Add role to role". so now when the user logs in, he will be able to see the worksets assigned.
    please note that we didnt do any user to role assignments in portal.
    so all the users assigned to this role in crm and doing manual "role upload" can login into portal and view the worksets. 
    portal role consists of iviews from both crm and bw. but now we just had the users assigned to role in crm mapped to role in portal, but what about bw iviews?
    i.e. what happens when i assign user x,y,z for this role in CRM and only users x,y in BW, so in portal x,y,z will be assigned to the respective role as we took only crm-portal user to role assignments. then the user Z will get an error obiviously for bw iviews, so how to ensure that CRM and BW roles are in sync with roles in portal.
    is there some concept of role mapping or something like that to solve my problem?
    sorry if my question is not clear, but hope that you can help me in this regard
    Thank you

    could some one please help me regarding this..
    I am in very urgent need..
    Thank you

  • Please help error regarding GPShell 1.4.2 with Java Card 2.2.1

    Hi masters..
    please help me regarding GPShell + Smart Card Reader (namely Omnikey Cardman 5321)..
    currently i've a smart card reader (Omnikey) and a sample java card that support for Java Card 2.2.1..
    i've installed Smart card reader's driver, and it has already completely function..
    When i try to run this command in GPShell 1.4.2, i get this report :
    C:\GPShell-1.4.2>GPShell helloInstallgemXpressoProR3_2E64.txt
    mode_201
    gemXpressoPro
    enable_trace
    establish_context
    card_connect
    * reader name OMNIKEY CardMan 5x21 0
    card_connect() returns 0x80100069 (The smart card has been removed, so that furt
    her communication is not possible.
    select -AID A000000018434D00
    Command --> 00A4040008A000000018434D00
    Wrapped command --> 00A4040008A000000018434D00
    select_application() returns 0x00000006 (The handle is invalid.
    Yes, i know that in that script (helloInstallgemXpressoProR3_2E64.txt), there's a script for load helloworld.cap into Java card..
    i tried that because i just want to make sure whether my Java Card run well or not..
    Please help me regarding this..
    Thanks in advance..

    Hi safarmer, thanks for your reply :)..
    Sorry before, i still don't understand about your last reply.. :(
    especially for check the crytpogram.. :(
    could you describe what mean of each line of code from that snippet code?..
    Sequence   : 0002
    challenge  : 598dd3961bfd
    cryptogram : 24cccf18c18437bb
    host       : 5a7787ba91497948
    DEBUG [] - Input to session S-ENC derivation: 01820002000000000000000000000000
    DEBUG [] - S-ENC: adc1163ba2a146fbb94af44c8676fb7cadc1163ba2a146fb
    DEBUG [] - Input to session DEK derivation : 01810002000000000000000000000000
    DEBUG [] - S-DEK: fd01086b6db03bdfe0d5cb61d03ed3abfd01086b6db03bdf
    DEBUG [] - Input to session CMAC derivation: 01010002000000000000000000000000
    DEBUG [] - S-MAC: 3e07b0c8fdfd798a573b9b9889d0cb513e07b0c8fdfd798a
    Input to card cryptogram verification: 5a7787ba914979480002598dd3961bfd8000000000000000
    DEBUG [] - Signature : 24cccf18c18437bb
    DEBUG [] - Cryptogram: 24cccf18c18437bb
    Card cryptogram authenticated=======================================================================================
    =======================================================================================
    i've added script "mode_211" to my script, as follow :
    mode_211
    enable_trace
    establish_context
    card_connect -readerNumber 2
    select -AID a0000000030000
    open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel
    delete -AID a00000006203010c0101
    delete -AID a00000006203010c01
    delete -AID a00000006203010c0101
    install -file HelloWorld.cap -nvDataLimit 500 -instParam 00 -priv 2
    card_disconnect
    release_contextbut when i executed that script in the console, i got this :
    C:\GPShell-1.4.2>GPShell helloInstallChan.txt
    mode_211
    enable_trace
    establish_context
    card_connect -readerNumber 2
    * reader name OMNIKEY CardMan 5x21-CL 0
    select -AID a0000000030000
    Command --> 00A4040007A0000000030000
    Wrapped command --> 00A4040007A0000000030000
    Response <-- 6F108408A000000003000000A5049F6501FF9000
    open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4
    f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel
    Command --> 80CA006600
    Wrapped command --> 80CA006600
    Response <-- 664C734A06072A864886FC6B01600C060A2A864886FC6B02020101630906072A864
    886FC6B03640B06092A864886FC6B040215650B06092B8510864864020102660C060A2B060104012
    A026E01029000
    Command --> 80500000083C4E03633407EC1800
    Wrapped command --> 80500000083C4E03633407EC1800
    Response <-- 0000715457173C2B8FC1FF020002598DD3961BFD8B6F2963C070FF949000
    Command --> 8482010010E17B69E2A3DFEA320B0B457657362614
    Wrapped command --> 8482010010E17B69E2A3DFEA320B0B457657362614
    Response <-- 9000
    delete -AID a00000006203010c0101
    Command --> 80E400800C4F0AA00000006203010C010100
    Wrapped command --> 84E40080144F0AA00000006203010C0101D259A163E654B99900
    Response <-- 6A88
    delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
    delete -AID a00000006203010c01
    Command --> 80E400800B4F09A00000006203010C0100
    Wrapped command --> 84E40080134F09A00000006203010C01094A9BF13AD2CC3E00
    Response <-- 6A88
    delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
    delete -AID a00000006203010c0101
    Command --> 80E400800C4F0AA00000006203010C010100
    Wrapped command --> 84E40080144F0AA00000006203010C010156679B9711B83FAB00
    Response <-- 6A88
    delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
    install -file HelloWorld.cap -nvDataLimit 500 -instParam 00 -priv 2
    file name HelloWorld.cap
    Command --> 80E602001F09A00000006203010C0107A0000000030000000AEF08C60201A8C80201
    F40000
    Wrapped command --> 84E602002709A00000006203010C0107A0000000030000000AEF08C60201
    A8C80201F400D35F07F1D11A31E500
    Response <-- 6985
    install_for_load() returns 0x80206985 (6985: Command not allowed - Conditions of use not satisfied.)What it does mean?..
    so, can i reset THE RETRY COUNTER of my Java Card?..
    could you give me an example script that reset the Retry Counter?..
    Thanks in advance..
    Sorry i really confuse.. :(

  • Can anyone help me regarding my Contacts on the Q10

    Hi - As a complete non tekkie,I hope someone can help me sort out my contacts on the Q10 - since I got it over a week ago,its caused me lots of frustration ( some issues now sorted,)but not regarding contacts,Problems are as follows
    1.Even when a person is already in my contacts list ,only their number is shown when they call - not the presons name - This does not happen with everyone however, as some peoples names do appear when they call - strange ??
    2.For some reason,some people names in my contacts list are duplicated - in some cases 3 or 4 times - again I have no idea what has caused this
    3.The contacts list syncs with my Office outlook system which keeps a copy of my contacts,but for some reason my Q10 also syncs with the contacts I have for Facebook and Linked in despite the fact that I have unchecked the box on the settings menu" Show account in contacts list" i.e I have set this to "Off" for both Linked in and FB
    So basically the contact list on my Q10 is in a bit of a mess - can anyone help me sort this out ?
    Thanks guys

    the duplication of contact was a result of sync with email and blackberry id the reason behind when you started a new q10 it always ask for blackberry id and then you entered blackbery id username and password it will restored blackberry contact from previous device in background and then you setup your email address with contact sync with server so result will duplication of contact in your blackberry  and i have the same issue but you can resolve this issue to download "contact x " software from app world and run this software it will merge your duplicate contact....

Maybe you are looking for