Help! Nothing works...
i have had my ipod nano for a week. i had it on charger and it finished charging. then all of a sudden while updating it came up with the funny little battery sign with the lightining bolt on the left? and it still has the do not disconnect sign. also it disappeared from my explorer and itunes. when i dissconnected it after hours... it wont turn on. it comes up with that stupid folder with the exclaimation mark. i have tried everything on the site. multiple times. nothing works at all. please reply asap.
if restoring your ipod to factory settings dosen't work, try bringing to an apple store or by sending it in to apple.
Similar Messages
-
Hi, I haven't been able to use quicktime to view internet files for awhile. I'm not sure if the problem started when I upgraded to 7.0.4, but now when I try to view one of the previews from Apple's site (for example), I just get the whited-out screen and nothing works. Also, when I start quicktime it says "get connected to the internet...etc," and I am connected.
I doubt it's a firewall problem since I can see files using Windows Media Player.
Any ideas? Thanks for any help...As far as I understand, we open a terminal window, type "telnet" and an IP address, and our username and password. We then close this window and can use Safari and any other browser.
Yes, proxy server does sound very familiar. But I went and re-signed in using terminal, and didn't see the words. Maybe I know it from someplace else? Is there anything I can check on Safari or Internet Settings other than what I've already done, which is open everything I can find and look for the words "firewall," "security," "settings," etc?
I still think the problem is that quicktime can't detect that the internet is hooked up, based on the error message I get (the "get connected to the internet" thing). -
Help, NOTHING works, have watsted hours on this #@! thing
I have years of experience with several NLE systems, but Premier Elements 10 is kicking my tail.
Consider the simplest of projects where two gopro units are placed on a kayak, one pointed forward in the direction of travel, the second pointed backward (at the person rowing).
Each clip is about 15 minutes in duration, bot occur at the same time (overlap). i would simply like to select between to two views (forward vs reverse) for my cuts-only program.
So far i have encountered the following problems, design errors in Premiew Elements 10.
1. Unable to align botth AV tracks in time. I smacked the hull with the paddle (similar to a clapper board) to provide a simple way to align the fwd/rev views. Premeir will not allow me to shift (align) the AV tracks with less then 1-second accuracy. I even tried turning off "snap", but program refuses to permit frame-accurate shift between tracks.
2. Program will not allow me to switch between "Video 1" and "Video 2" tracks in preview window. Depending on the last clip dragged to the timeline, only one can be selected. How the $#@! can one determine the edit points if one cannot view the various tracks that are aligned in time??????????????
3 Using classing video editing terminology, my clips may be condiered video "bus 1" and video "bus 2". How does one select one or the other for output to the "output bus" ?? !!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I HAVE WASTED AN ENTIRE AFTERNOON ON THIS !!!!!!!!!!!!!!!!!
I have observed several other glaring design errors in this program- but thats another post...nealeh wrote:
whsprague wrote:
Since my source is shot in 60p,
Now that could give you a problem. Natively PRE10 does not support 60p, only 60i. However the following 'user written add-on preset' might help you out with that:
Premiere Elements 10 (Windows): new editing presets for 1080p60/50, burn Bluray/AVCHD at 24p
whsprague wrote:
I could not split a frame
No, PRE won't let you do that so 1/30th second is the best you'll get. Same with audio, frame level is the best you can get within PRE. But, while a little tedious, you can export the audio from PRE; edit it with an external audio editor (e.g. the free Audacity, or my favourite (the aging but still working) Magix Audio Cleaning Lab) to add or subtract smaller time units; and import it back to PRE.
Cheers,
Neale
Insanity is hereditary, you get it from your children
It seems to be commonly assumed on this board that PRE10 does not like 60p. I didn't know that, so I started using 60p source material from both a Panasonic and Sony camera a few months ago. I have Windows 7 and PRE10 both installed as 64 bit on an i5 Toshiba laptop with no video card and 8 gigs of ram.
My project preset is AVCHD LITE 720p60 and please note that it is "natively supplied" as a choice. It does not produce a red render line when 1080p60 files are read into PRE10. If you use a 60i preset, a red render line is displayed.
At production time there are the usual choices for YouTube, DVDs and (often overlooked) the high definition "AVCHD disc" that plays HD on most Blu-Ray players. Although a little hidden, 1080p60 is a "natively supplied" choice. Go to Share>Computer>AVCHD and click Presets. Select "MP4 - H264 1920x1080p30" from the drop down menu. Push the Advanced button, go down to the Frame Rate button and select the Adobe supplied "59.94". Save it as a preset for future projects.
Another indication that it is "natively supplied" is the time line itself. At full magnification there are 60 hash marks between each second. (Probably because I selected a 60p project preset.) If you watch the frame counter and click ahead one frame at a time, you can watch it go through 60 frames before a second rolls over.
The default bit rate (in my chosen PRE10 provided preset) is a little higher than the source clip bitrate. Consequently, if you use these settings on a single clip and render, the final MP4 file is a little larger than the original. But it sure plays nice on my laptop with Splash Lite or on my 55" HD TV with a WD TV Live Media Player. Please note, that the creation of a 1080p60 file for viewing has limited playback options. It certainly does not make sense for uploading to YouTube or as a workflow step in making a DVD.
1080p output is not for everybody. But, there are "purists" with newer 1080p TVs and camcorders that want to make video from their1080p clips that can be perceived to be equal to the source footage quality. In fact, I think almost everyone with a new camcorder gets 1080p! With all due respect to the long timers here, to suggest on an Adobe forum that Adobe's primary consumer NLE can't or won't do it is a disservice to Adobe.
I have also read in various places where people do have trouble with 1080p60 files. I can't test or prove it, but it seems to be important that it be PRE10, 64 bit and more than minimum memory for reasonable operation.
So, in summary, choosing a project preset that makes the work flow fairly smooth on a midgrade laptop and making one change to a Share preset you get 1080p60 output. To me that's pretty close to "native" even if it is not outlined in a step by step procedure in the instructions. It is still in there, so an Adobe programmer in India must have put it there.
Bill -
Please HELP, nothing working! Secure Link to iTunes Store failed
I am going absolutely insane here, I cannot fix this problem. I have been searching Google for hours trying every single thing that people recommend, NONE of them are working. This is ridiculous, something has to work to fix this, please help, I'm getting increasingly frustrated with this issue. My internet works just fine, there is no connection issue that I am aware of. I tried all the things that Google search came up with, none have yet to solve this issue. Please someone HELP!!!
And to answer questions I am sure that will come up:
YES iTunes is enabled through Windows Firewall
YES I have tried uninstalling and reinstalling iTunes
YES I have tried turning off Windows Firewall
YES I have tried turning off my anti-virus software
YES I have tried uninstalling my anti-virus software
YES I tried the command prompt Winsock netsh reset
Anyone have any ideas that I haven't yet come across? I'm at a complete and total loss for what to do and I need my software to work properly. Thank you so much.Here's my diagnostic test results in case this tells someone something useful. I did notice that it says iTunes is not enabled in Windows Firewall but this is false, I checked and it is in fact enabled, not sure why iTunes fails to realize that.
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
ASUSTeK Computer Inc. K53E
iTunes 11.1.3.8
QuickTime not available
FairPlay 2.5.16
Apple Application Support 2.3.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.0.0.117
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00C4BD600A2AAD08
Current user is not an administrator.
The current local date and time is 2013-12-15 23:14:01.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics 3000
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {342B5226-A1DC-4483-A78A-4F5FF6A951F3}
Description: Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {5B0927CE-C994-43A4-B60A-0AA6A141C020}
Description: Atheros AR9285 Wireless Network Adapter
IP Address: 192.168.1.12
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sun Dec 15 22:01:33 2013
Lease Expires: Mon Dec 16 22:01:33 2013
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Basic connection to the store failed.
An unknown error occurred (0x80090330).
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2013-06-01 16:36:33.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
E: HL-DT-ST DVDRAM GT34N, Rev AS00
Data or MP3 CD in drive.
Found 1 songs on CD, playing time 255:57 on CDROM media.
Track 1, start time 00:02:00
Get drive speed succeeded.
The drive CDR speeds are: 4.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
**** Device Connectivity Tests ****
iPodService 11.1.3.8 (x64) is currently running.
iTunesHelper 11.1.3.8 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C26. Device is working properly.
Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C2D. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPhone 4 (CDMA) running firmware version 7.0.4
Serial Number: C8RH7F7YDP0V
**** Device Sync Tests ****
No iPod, iPhone, or iPad found. -
null
Post relates to: Zire 31Hmmm... that's really interesting.
I'd like to see the whole log for myself.
Would you mind posting it here? -
It first started with the error saying (cannot load xpcom) I tried everything your forums say to do but first off it will not allow me to delete it from my system? It asks permission but then nothing happens? I tried safe mode with networking same thing? Nothing works. Is this a virus? Please help I hate internet explorer. Thanks Bob
Nope did not work. I get a message at the bottom asking permission to save and just as fast as I click save it says could not and then there is a rentry but that does not work as fast as you click it/ I cannot remove it because it asks permission and then you think it is going to remove it but nothing happens? Please help nothing works and I hate using internut explosion
-
My ipad just won't let me sign in with my apple password on FaceTime or iMessage since updating to ios7 it says check my network connection, even though my iPhone works fine with the same password, can anybody help please, I have tried numerous things but nothing works. Will I have to wait for a bug fix to sort this? I hear they are working on one a the minute, I hate ios7
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
all i get when i turn it on is a loading screen with a picture of a charger going into an ITUNES sign? HELP nothing will work not interactive at all.aince updating to I.O.S7.0.2???
What should i do currently have it on charge for several hours not done a thing and have been locking and unlocking and resettingPlease see: http://support.apple.com/kb/HT1808 for further info. It sounds like you are already in Recovery mode so if the image in Step 4 is the one you see, skip to Step 5.
Regards,
Steve -
I have embedded 4 videos on my website. It is a single page, scrolling site. When I scroll down, the videos scroll in front of the top menu bar, instead of behind it. I have tried changing layers, etc., and nothing works. Please help.
Thanks.
Paul W. NormanHi,
Kindly create a new layer, via the Layers panel:
Then, right click on the navigation bar, and choose Move to Layer > Layer 2
Ensure that Layer 2 is on top of the other layers.
Hope it helps,
Sonam -
Not able to open adobe XI Pro after I have filled out a documents and trying saving it. The program stops working & won't open up again. Tried to complete a repair, rebooting nothing works. Help please.
Hi,
Can you pls. provide more details of the issue?
OS/Platform
It would be great if you can provide the MSI logs for repair from the %temp% directory.
Thanks, -
My apps wont open and i keep downloading new apps, hard resetting, syncing and nothing works! PLEASE HELP
Then restore the iPod. First from backup and if problem persists, restore to factory defaults/new iPod.
-
Help, I can't sync any music to my iPhone 5s or iPad 2 ! it says it's finished sync but the music is greyed out and not on my devices.. I've tried unchecking the music and doing it manually. Nothing works. I took it to Apple store Robina no help..
So I have found a common denominator to this phenomenon. After having the same problem, I started to recopy my playlist of 500+ songs in groups of 10-20, 30+, 75+, and then over a 100+. Any music I have purchased from iTunes won't copy, but everything else did. Unsure if I made a playlist called "Purchased" at some point or this is an iTunes default, I also noticed it had some of the songs contained in my other playlist and was showing on my iPhone. Regardless of what I did such as dragging music from that playlist to the other and clearing songs from that playlist, I removed it altogether from the iPhone itself vs. doing through iTunes. After that, music copied fine to my playlist.
So, my theory is that iTunes is getting tripped up on purchased tracks already showing on the phone and all songs are showing grayed out/dotted circle because iTunes can't resolve the conflict with purchased tracks.
Hope this makes sense and is helpful. -
After a rescent update on my ipad 3 I can no longer connect to my pc with WIFI. I have tried resetting ipad and itunes but nothing works. Talked to support and they were no help. Any suggestions?
What error do you get if any?
Have you tried connecting to another network besides your own?
Do you use DHCP on your router or static IP address? -
for the past 2 weeks I can not sync my iphone contacts or calendar to outlook. I have spent 5 hours reading on how to fix this matter but nothing works.
Can anyone help me?The warranty entitles you to complimentary phone support for the first 90 days of ownership.
-
I tried updating my iPhone3g through itunes. Now i'm stuck in recovery mode and i've EVERYTHING even websites and such but nothing worked out! I've also tried restarting and fiddling with the home button but nothing still worked. Please help! What should I do??
Well, if you've indeed tried EVERYTHING, then you'll need to bring your phone to Apple for evaluation.
-
My Ipad is stuck on the connect to iTunes screen, I have tried plugging into iTunes but it makes the necessary noise but the computer does not recognise it and nothing alters on the Ipad screen. Have tried various computers and leads and it still does not work. Have also tried the switching off, plugging in to computer and turning on again using the on button and then the home button but nothing works. This happened while I was downloading software update. Please help me.
I suggested several things to GeekyNerdGirl in her first post here. Take a look.
My iPad is in what seems like permanent restore mode after iOS 7.2 update?
It can take more than a few attempts before Recovery Mode will work and you have to follow the steps exactly. DFU mode is even harder to perform correctly beside of the 10 second hold. Don't stop trying. Eventually one of these methods could work for you.
Maybe you are looking for
-
Variable conversion in BEx Web 3.5 after EHP1 Update
Hello experts, we have a problem after updating to ehp1 with a 3.5 web query. When we enter in the variable screen for the characteristic variable of fiscal year "0032010" then the bi clears that field. Without ehp1 the system replaces "00332010" wit
-
Hi I am creating an application which take the input from the open XML of MS Office, and plot the text same as the powerpoint . But the default spacing between the each word of the paragarph not same as the powerpoint, so the text goes to
-
Saving PDF in Preview results in unsearchable File
Hi I found an archieved discussion (but without a single answer to the question), so I'm reproducing it here again because I have the exact same problem and am hoping for suggestions for a solution: "If I take any PDF that is searchable (say from the
-
My mothers iPhone just got stolen. She has the Find iPhone app on her phone. Is it possible to find it from my iPhone or iPad?
-
OBPM : fuego.papi.exception.NoPermissionException
Scenario: 2. Logged in as A 3. Create a new Instance (X) - 4. Logged out as Sales Agent. 5. Logged in as Another user B to whom OBPM assigned automatically. 6. Selected X in B's worklist. 7. Assigned back to A. 8. Technica