HELP NOW, PLEASE... MSI KM2M Combo-L Won't boot...!!!

HELP NOW, PLEASE... MSI KM2M Combo-L Won't boot...!!!
1) System was running fine...
2) Plugged in Split Mini-Jack from daughter card slot, to Line-In Minijack (where it was before)...
3) Sound from speakers blurted out loud...
4) Screen Froze up... no Ctl-Alt-Delete...
5) Power button... No response...
6) Reset Button... No Response...
7) Unplugged...
8) Try to power on...
RES:: No signal to monitor... LED Light on case turns on for about 10 seconds... CD-rom LED turns on as if BIOS... Then computer turns off... Fans Still working...
THOUGHTS:: Since the speakers are powered through the sound card (and were on at time), then when the Split Mini-Jack Dongle from daughter card, was plugged back into the Line-In Mini-jack port (where it was origionally)... Something shorted out... Any Ideas on what, exactly...?? Anyone heard of this before...?? I've never seen something like this before, and PC's have changed SOOO much over the last few years, that I'm kinda in the dark... But this is my girlfriend's computer, and she has a Mid-Term paper due on Monday (today being Saturday), and I'm in serious trouble right now... PLEASE HELP...!!!
The company that built the computer, doesn't seem to be in business anymore...!!!
(But the waranty sticker is still intact on the case, she doesn't want me to cut it unless the builder is definitely out of business...)
Basically... I'm Screwed...!!! I need your help...!!! SOON...!!!
THANK YOU SO MUCH IN ADVANCE...!!!
-RudeBoy
[email protected]

Danny perhaps better to delete this thread as there is another one already in here.
and the trouble shooting have already started there.

Similar Messages

[VIA] MSI KM2M COMBO(MS-6738 VIA 8375 and G-force 6600 or 6600GT..Help

Hi and thanks I would like to buy a videocard like these two MSI GEFORCE 6600 GT 128MB TV-OUT DVI VID-IN AGP or
MSI GEFORCE 6600 256MB TV-OUT DVI VIDEO-IN AGP.what u think guys and i have this system..
Mothebord....MSI KM2M Combo (MS-6738) 3 PCI, 1 AGP, 2 SDR DIMM, 2 DDR DIMM, Audio, Video
chipset   ..VIA VT8375 ProSavageDDR KM266
CPU    AMD Athlon XP, 1800 MHz (13.5 x 133) 2200+
VideoCard   NVIDIA GeForce FX 5200 (128 MB)
Microsoft Windows XP Professional
1024GB DDRRAM PC2100 266MHz
Thankz

sorry for that memory is like you said 266MHz and not 233, and the price of the two cards isn't that much different..i can buys either one ...what i want to know is if my motherbord can take such cards and not to have any problems in future,i don't want to buy any of these videocard who doesn't fit this mothercard
thanks again

Lower the RAM's Memory Timing to something Less Aggressive...? MSI KM2M Combo-L

(Not sure where would be the best place to post, so this question is posted here and in the BIOS Thread... If possible, could the Moderators please leave BOTH as to assure a response... I'd appreciate it... Thank You..!!!)
MSI KM2M Combo-L (601-6738-010)
I’m running into some application errors, and the main suggestion is to lower the RAM’s Memory Timing to something Less Aggressive...
The problem with that is I don’t see any option in the MSI KM2M Combo-L Phoenix 6g BIOS...
Basically, I’m trying to “Underclock”... NOT “Overclock”...
Any ideas...??
(I tried “searching” the forums, but I’m not finding anything, other than people asking “Why would you want to do that...??” Those types of responses aren’t very useful...)

Hi
The KM2M Combo L bios under Dram Clock/Drive Control allows some adjustment of the memory timings. I suggest that you run it with the Dram Clock set by Spd (default). If you still have errors, run memtest for a couple of hours to check your memory.

HP system won't start with MSI KM2M Combo motherboard, HELP!!

Hi,
I recently tried installing MSI's KM2M Combo-L (MS-6738) motherboard in a HP Pavilion 7909 PC but NOTHING happens!
The green light on the PSU is on, but when i press the ON button nothing happens. I suspect the PSU might not be supplying enough power (label on the unit says Output -124W) or could the motherboard be fried.
Please help

The PSU is:
Delta Electronics Inc
Model: DPS-120AB-1 A Rev: 01
Input: 100-127V ~ /4.0A 47-63Hz
200-240V ~ /2.0A 47-63Hz
Output: 124W Max.
+5V / 10.A +3.3V / 11A
+12V / 4.0A -12V / 0.8A
+5VSB / 1.5A
PC:
Processor
Model:    AMD Duron(tm) M7 Processor
Speed:    1.30GHz
Model Number:    1300 (estimated)
Performance Rating:    PR1885 (estimated)
Type:    Standard
L2 On-board Cache:    64kB ECC Synchronous Write-Back (16-way, 64 byte line size)
Mainboard
Bus (es):    ISA AGP PCI USB i2c/SMBus
MP Support:    No
MP APIC:    No
System BIOS:    AT/AT COMPATIBLE PhoenixBIOS 4.0 Release 6.0.A
Total Memory:    255MB SDRAM
Chipset 1
Model:    ASUSTeK Computer Inc VT8363/5 KT133/KM133 System Controller
Front Side Bus Speed:    2x 100MHz (200MHz data rate)
Total Memory:    256MB SDRAM
Memory Bus Speed:    1x 100MHz (100MHz data rate)
Video System
Monitor/Panel:    Plug and Play Monitor
Monitor/Panel:    Default Monitor
Adapter:    NVIDIA GeForce2 MX/MX 400
Physical Storage Devices
Removable Drive:    Floppy disk drive
Hard Disk:    Maxtor 6E040L0 (38.3GB)
CD-ROM/DVD:    LITEON CD-ROM LTN485S (CD 48X Rd)
CD-ROM/DVD:    RICOH DVD+RW MP5125 (CD 32X Rd, 12X Wr) (DVD 4X Rd)
CD-ROM/DVD:    NERO IMAGEDRIVE2 SCSI CdRom Device (CD 32X Rd) (DVD 4X Rd)
Logical Storage Devices
1.44MB 3.5" (A:):    N/A
Main (C:):    6.1GB (2.4GB, 39% Free) (NTFS)
Stuff (D:):    14.0GB (6.4GB, 46% Free) (NTFS)
Stuff_2 (E:):    18.3GB (16.1GB, 88% Free) (NTFS)
Video_downloads (F:):    4.4GB (0MB, 0% Free) (CDFS)
CD-ROM/DVD (G:):    N/A
CD-ROM/DVD (H:):    N/A

MSI KM2M combo won't power on

Last week I bought a KM2M-combo board, an AMD XP 2200 cpu + cooler and 256mb ddr pc400 MDT memory. When I installed it and pressed the power button it didn't boot, I only heard a soft "siren sound" coming from a speaker on the board itself (no display on monitor, no fans spinning). I used both power connectors (the big one, and the small, square shaped one) and used the onboard video output.
I've tried switching the ddr memory to another socket and used SD-ram. I switched PSU's, with these stats:
300W
+12V/15a
+6V/30a
+3.3V/20a
No succes, so I dismounted the board and pulled off all cables, to set it at a minimum (motherboard, cpu+fan, memory and the PSU with above stats). I reseated the CPU and tried using an AGP video card, in stead of the onboard video; same problem.
I've come to a dead end here. Any suggestions?

The ram says: MDT DDR, 256mb PC400 CL2.5 (single-sided). It'll probably be PC3200 memory. But would this matter? Even if it's faster memory than the PC2100 the motherboard supports, wouldn't it just work below it's max speed (in this case at PC2100)?
I also used an old piece of APASS PC100 64mb SD-RAM memory (removed the DDR first of course), I experienced the same problem: it didn't power on.
So I used a piece of memory which is too fast, and one which is slow :P
[edit]
typo's
[/edit]

Please help Mum's Acer Aspire 8.1 won't boot to windows even with a windows disc BSOD

Hi. I am sooo very frustrated. My mum has an ACER Aspire E1-522 series. She's been having probs with it since last summer as it turned very s-l-o-w and would take forever to do its updates...however, the internet is messed up here sometimes and hard to 'jump onto' with Wifi as she's not 'hardwired' to the internet. Anyway, I had cleaned out her system a few times, no probs...Then AFTER the last update from windows ( approx. a month ago) and the computer shut itself down. Whenever she turned it on, it would 'interrupt' her after sign on screen for Windows and then say it was fixing itself. I told her I would try to fix it (as we CANNOT afford to take it to repair for $100+) So I bought a 16g usb to do a back up on (it has never been done) as the back up would not go onto discs (??) Now, that I invested $ in that, the darn thing will ONLY come on with logo, and IF I'm lucky, will come on with blue screen "windows encountered an error, wait for repair..." then it goes black (or sometimes blue) for days...WHAT can I do?? How do I fix this? I don't know how to get the battery out either, but I don't want to damage the computer in case it does have to go to the shop. And how does one even 'get in' for the RAM in case that is the problem? PLEASE PLEASE help!! ( it's not even 2 yrs. old... but it is out of warranty...) Thank you for reading my rant! (OH-PS: We tried to boot to windows with a disc and NO luck..)

Hi,
Would you please first check if the system can startup into Safe mode?
Then, please try the startup repair in Advanced menu after you boot your computer via installation media.
How Run "Automatic Repair" to Fix Startup Issues in Windows 8 and 8.1
http://www.eightforums.com/tutorials/2843-automatic-repair-run-windows-8-a.html
Then, if the issue still persists, try to boot PC in WinRE, and enter command prompt to run following commands:
bootrec /fixmbr
bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd
Detailed steps, please refer to this link:
Windows 8 Boot Issues? Try Fixing the Master Boot Record (MBR) or Boot Configuration Data (BCD)
http://www.techspot.com/guides/630-windows-8-boot-fix/
Note: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore,
Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you
completely understand the risk before retrieving any software from the Internet.
Keep post.
Kate Li
TechNet Community Support

BRAND NEW MSI x99s Gaming 7 Won't Boot, Debug Code 00

Just completed my build and my pc won't boot. Everything plugged directly into the psu is working but fans plugged into mother board don't spin and getting debug code 00 nothing displayed on screen.

Hmm ok.
What you could do is: try each stick on its own, in every single DIMM slot. Make note which slots/sticks work or dont work. Then add to 1 (known to work) RAM stick and try moving this single one around all DIMMs again. Do the same until you get a failure or if works fine.
Which slots did you use by the way?
Quote from: robbie.bowden on 18-May-15, 04:23:08
I then added the 4th one back in and now it boots. Any ideas why just switching those 2 positions would change anything??
Maybe for the first time it didnt go all the way down?

Msi a55m-e33 motherboard won't boot up

Currently bought new parts to install to my rig but they won't boot up??
Motherboard: msi a55m-e33
cpu: amd a8 6600k
ram: hyperx 1866mhz 8gb
psu: corsair 430 cx

Quote from: badboy2k on 21-July-14, 13:19:05
first suspect is the BIOS on the board! for that CPU it needs at least Version B1 (11.1) for a Richland CPU to be supported...
if you do not know what BIOS version your board has tell us the Serial Number of the board so we can tell you if thats the issue or not? (that is on the UPC label on the box it came in or on a sticker on the rear of the motherboard!)
Hi thanks for replying, the s/n # is 601-7721-170b1403111085

MSI 760GM-P21 (FX) Won't boot

i have this motherboard and won't boot. The hard-disk is ok.
How to enter bios ? I press del and nothing.

Unfortunately we can't scry. Follow >>Posting Guide<< and add more info.

Help with iPod 3G... firmware won't boot anymore... please help!

I own an iPod 3G since August 2003.
It always worked well...
but a few days ago I went to turn it on (after not having turned it on for 3 weeks) and it booted, because the Apple logo appears, but it just won't go in!
So I get the Apple logo all the time, until the battery's flat!
After the battery got flat, I tried recharging, but all it does is run the Apple logo again (but I'm pretty sure it does recharge, even though the bar doesnt appear).
I can still put the iPod on Diagnostic Mode... that still works, but not the actual iPod firmware.
I've tried connecting it to the computer too, but nothing happens, Windows says that the USB device wasn't detected.
Please help me!
ps: i did an HDD Scan and after about 5 minutes it said HDD Pass (or something like that)
i did a USB disk scan and it kept scanning and after 30 minutes nothing changed so I gave up (the ipod was really heating up)
windows just recognizes that there's a device connected, but doesnt recognize the device
What is wrong?

Hi: Try this link,,,,,
I can't get passed the Apple Logo

PLEASE HELP!!! 10.39 Classic won't boot!!!!

I have 10.39 installed on my G4 sawhorse. Recently, after experiencing widespread problems and panic with CLASSIC, I erased my 80 gig hard drive and started over. After 9.2 was re-installed, I re-installed 10.39.
Everything was fine until detaching an attachment from Outlook Express 5.06 (for Mac OS9) while logged into one of the two extra user accounts I set-up.
Immediately after double clicking on the detached word doc (on the desktop or directly in the Outllok mail window), OUTLOOK, WORD 2001 for OS9 AND CLASSIC all froze .
Now, the two extra accounts won't load classic.
Using disc utilities from the start-up disc, I have checked and fixed permissions -- which doesn't address my issue.
Help!!!!!
Harry
G4 sawtooth 500mhz Mac OS X (10.3.9) 30 Gig hd, extra ram, DVD writer
G4 sawtooth 500mhz Mac OS X (10.3.9) 30 Gig hd, extra ram, DVD writer

The only reason I was hesitant wipe any extensions is that CLASSIC has been fine on other logins.....so it didn't make sense that it would happen only in one account should there be a bad extension.
I guess I could try that,,,,,,,since CLASSIC loads with extensions off.
Any other ideas in case that doesn't work???

Original not found? Big mess! Need Help now please!

Hi! I need a lot of help.
I deleted the songs off my itunes and then copied them back by using my ipod. Then, thinking everything would be fine with my music, I restored my ipod because it was messed up.
Now when I tried to sync my ipod, it does not sync the music, and when I click the , it says original file not found! I bought all these songs once and I would be devestated to have to buy them again. Please help immediately as I will be leaving tomorrow!!!
Thanks very much!!!
Jakedre

First thing to try, is booting from the restore DVD and installing a fresh copy of 10.6. If you're lucky, the 10.6.4 update just hosed your OS install, and a simple reinstall is all that's needed.
Once you've booted to the 10.6 installer, it couldn't hurt to run Disk Utility from the Utilities menu to verify the SMART status of the drive, and even run a repair disk operation on it.
If the SMART status is failed, or Disk Utility doesn't see the drive, then you're looking at a hardware failure. You'll need to take it somewhere to be fixed if it's under warranty, otherwise if you have some precision screwdrivers like a PH000 and Torx T4, you can replace the drive yourself with pretty much any 2.5" SATA drive.

Need help now please. macbook wont start up

I have a white macbook.
I was using it yesterday and the computer just shut off. I went to restart it and it does the chime, goes to the apple screen and just as the little circle under the apple spins, the laptop totally shuts down. it will not start.
I have tried to reset the pram and that didn't work. I just installed 10.6.4 yesterday....
Please help. I need the computer for work today.
Thank you.

First thing to try, is booting from the restore DVD and installing a fresh copy of 10.6. If you're lucky, the 10.6.4 update just hosed your OS install, and a simple reinstall is all that's needed.
Once you've booted to the 10.6 installer, it couldn't hurt to run Disk Utility from the Utilities menu to verify the SMART status of the drive, and even run a repair disk operation on it.
If the SMART status is failed, or Disk Utility doesn't see the drive, then you're looking at a hardware failure. You'll need to take it somewhere to be fixed if it's under warranty, otherwise if you have some precision screwdrivers like a PH000 and Torx T4, you can replace the drive yourself with pretty much any 2.5" SATA drive.

I just downloaded the newest version of Adobe Reader to my MAC, I need help now please

The End user license agreement did not appear to sign and accept. So now when I open another site to download pdfs, it says I need to launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser.
I cannot launch Reader to get to the End User Agreement. Can you help me please

What happens when you try launching Reader?

MBP 17" and Toshiba LCD HDTV HookUp HELP NOW PLEASE

I have tried to connect my MBP 17" to my Toshiba LCD HDTV Model # 42HL67 with a male to male VGA Cable as Toshiba will not let you go through HDMI so please don't send me that way and all I get on the Toshiba is nothing in the menu it has a PC where the HDMI and Ant. connections are and the PC is grayed out even though I have it connected using my Adaptor that came with my Macbook Pro 17" the adaptor is the only way I can connect the VGA cable to my MBP why can't I get the picture on the LCD when I'm using the F7 key to mirror is there something else I need to do on my MBP please go into detail as I know my Mac's this is the 1st time connecting any Mac to a TV?

Okay called Apple  and we had a talk and it wasn't
the cable and it wasn't the Macbook Pro 17"
it was the Input Labeling on Toshiba needed to be adjusting
all you have to do is Select it and change it from the
Grayed to the = sign then the PC shows in Input
So now my MBP 17" is on my Toshiba 42" LCD HDTV
and one other note you can use the HDMI adapter that Apple
sells so if you have the Model 42HL67 you can set a PC
up using the HDMI connection your not limited to the VGA...!
Thanks my Apple Family once again to ALL...!

HELP NOW, PLEASE... MSI KM2M Combo-L Won't boot...!!!

Similar Messages

Maybe you are looking for